Bindicator RS-485 Installation & Operation Manual

Text of Bindicator RS-485 User Guide:

• Bindicator RS-485, InvisiLink TM Wireless Radio Installation & Operation Manual CONTENTS I. HANDLING AND STORAGE ..................................................................................................................... 1 INSPECTION AND HANDLING DISPOSAL AND RECYCLING STORAGE II. GENERAL SAFETY ................................................................................................................................... 2 AUTHORIZED PERSONNEL USE MISUSE III. PRODUCT DESCRIPTION ....................................................................................................................... 3 FUNC

• Bindicator RS-485, SAFETY SYMBOLS WARNING: IDENTIFIES CONDITIONS OR PROCEDURES, WHICH IF NOT FOLLOWED, COULD RESULT IN SERIOUS INJURY. RISK OF ELECTRICAL SHOCK. CAUTION: IDENTIFIES CONDITIONS OR PROCEDURES, WHICH IF NOT FOLLOWED, COULD RESULT IN SERIOUS DAMAGE OR FAILURE OF THE EQUIPMENT. VII. MAINTENANCE ...................................................................................................................................... 12 VIII. TROUBLESHOOTING ............................................................................................................................ 13

• Bindicator RS-485, 1 www.bindicator.com WRL180213 Rev. B InvisiLink Wireless Radio I. HANDLING AND STORAGE SAVE THESE INSTRUCTIONS INSPECTION AND HANDLING Do not dispose of the carton or packing materials. Each package should be inspected upon receipt for damage that may have occurred due to mishandling during shipping. If the unit is received damaged, notify the carrier or the factory for instructions. Failure to do so may void your warranty. If you have any problems or questions, consult Customer Support at 1-800-778-9242. DISPOSAL AND RECYCLING This product can be recycled by specialized companies and must not be disposed of in a municipal collection site. If y

• Bindicator RS-485, 2 www.bindicator.com WRL180213 Rev. B II. GENERAL SAFETY AUTHORIZED PERSONNEL All instructions described in the document must be performed by authorized and qualied service personnel only. Before installing the unit, please read these instructions and familiarize yourself with the requirements and functions of the device. The required personal protective equipment must always be worn when servicing this device. USE The device is solely intended for use as described in this manual. Reliable operation is ensured only if the instrument

• Bindicator RS-485, 3 www.bindicator.com WRL180213 Rev. B III. PRODUCT DESCRIPTION FUNCTION InvisiLink is a wireless radio solution for devices that communicate via RS-485 or RS-422. A radio is connected to both the measuring device, like a Yo-Yo or controller, and the receiving device, like an ORB. Then the InvisiLink radio sends data back and forth between the devices. This system eliminates the need for cables and conduit connecting a measuring device to a device collecting data. It is also possible to have a single device receive multiple data streams from ‘send

• Bindicator RS-485, 4 www.bindicator.com WRL180213 Rev. B IV. MECHANICAL INSTALLATION WARNING: REMOVE POWER FROM THE UNIT BEFORE INSTALLING REMOVING OR MAKING ADJUSTMENTS. CAUTION: DO NOT ROUTE SERIAL CABLES IN THE SAME CONDUIT WITH AC POWER CABLES. CAUTION: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (I) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (II) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. MOUNTING CONSIDERATIONS • Mounting

• 5 www.bindicator.com WRL180213 Rev. B 5. Clean enclosure of any debris, replace the board back into the enclosure, using all four (4) mounting screws. 6. Determine desired location for mounting the unit. TO MOUNT THE INVISILINK ENCLOSURE 1. Hold the enclosure against the wall in the desired location and mark the positions of the mounting holes. Place the

• Bindicator RS-485, 6 www.bindicator.com WRL180213 Rev. B V. ELECTRICAL INSTALLATION WARNING: REMOVE POWER FROM THE UNIT BEFORE INSTALLING, REMOVING OR MAKING ADJUSTMENTS GENERAL SAFETY When using electrical equipment, you should always follow basic safety precautions, including the following: • The installation/wiring of this product must comply with all national, federal, state, municipal, and local codes that apply. • Properly ground the enclosure to an adequate earth ground. • Do not modify any factory wiring. Connections should only be made to the terminals described in this section. • All connections to the unit must use conducto

• 7 www.bindicator.com WRL180213 Rev. B Figure 2: Wiring Diagram RS-422 8 POS CONN. WIRING DIAGRAM RS-422 5 14 3 2 9 8 7 6 - 5 + 9 Pin 5 - Orange Pin 9 - Blue Pin 2 - Gray Pin 7 - Brown Pin 8 - Green N L CUSTOMER WIRING GND RS-422 N L COM- COM+ OUT- / Tx- OUT+ / Tx+ IN- / Rx- IN+ / Rx+ PWR RS-485 RS-422 OUT- / Tx- OUT+ / Tx+ IN- / Rx- IN+ / Rx+ GND N L WIRELESS BOARD Figure 6. POWER

• Bindicator RS-485, 8 www.bindicator.com WRL180213 Rev. B Figure 4: Wiring Diagram RS-422 with 4-20 mA Input Box 2 POS CONN. WIRING DIAGRAM RS-422 W/4-20 5 14 3 2 9 8 7 6 Pin 5 - Orange Pin 9 - Blue N L PWR CUSTOMER WIRING GND N L GND This Power Board is mounted under the Wireless Board to the right. The (2) boards are shown side-by-side for clarity. - + IN+ IN- OUT+ OUT- Pin 2 - Gray Pin 3 - Yellow Pin 7 - Brown Pin 8 - Green + - + - + - + - Ch.1Ch.2Ch.3Ch. 4 + - + - + - + - Ch.1Ch.2Ch. 3Ch.4 4-20mA N L - + Figure 6.

• Bindicator RS-485, 9 www.bindicator.com WRL180213 Rev. B VI. SET-UP 1. The enclosure has been mounted. 2. Determine Point to Point or Multi-Point conguration. See Figure 10 for Dip Switch settings. 3. Serial cable has been wired, and power has been wired and turned on. 4. Ensure the Power Indicator LED light is solid red and that Serial Data In/Out LEDs are ashing. See Figure 5. No additional programming is required. All radio enclosures should automatically begin sending and receiving signals. NOTE: Communication device types cannot be mixed. RS-485

• 10 www.bindicator.com WRL180213 Rev. B Figure 7. Point-to-Point (Multi Device) InvisiLink Remote InvisiLink Base ORB or PLC Device 1 Device 2 Device N-1 Device N N= Number of Devices = 10 for RS422 = 32 for RS485 RS485 RS422 Note 1 Note 2 RS485 RS422 Figure 8. 4-20 mA Point-to-Point InvisiLink InvisiLink ORB 4-20mA Base N = Max of 16 Devices ORB or PLC Device 1 Device 2 Device N-1 D

• 11 www.bindicator.com WRL180213 Rev. B Figure 9. Multi Point InvisiLink Remote Device RS485 RS422 Note 1. InvisiLink Remote Multi-Point Remote Multi-Point Remote (N) Device RS485 RS422 Note 1. InvisiLink ORB or PLC RS485 RS422 Note 2. (N) = Max of 50 Devices. Each remote must be identical and match the base protocol. Multi-Point Base To set multi-point units, see gure 10 for di

• Bindicator RS-485, 12 www.bindicator.com WRL180213 Rev. B VII. MAINTENANCE PREVENTATIVE MAINTENANCE See ORB 4-20mA Input Box IOM for specic maintenance and possible replacement parts for the ORB 4-20mA Input Box unit. There is no preventative maintenance for a single unit radio. REPLACEMENT PARTS LUC044016 Extended Range Antenna, 2 ft (61 cm) Connection Cable LUC044023 Extended Range Antenna, 10 ft (3 m) Connection Cable LUC044005 Extended Range Antenna Lightening Arrestor

• Bindicator RS-485, 13 www.bindicator.com WRL180213 Rev. B VIII. TROUBLESHOOTING For technical or service questions, please call the manufacturer Customer Support at 1-800-788-9242. For detailed dimensional drawings, go to www.bindicator.com SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION RSSI LEDs not on Radio(s) are not powered on Make sure the Indicator LED is red; if not check wiring Protocol switches do not match Check dip switches and change if needed Antenna not connected Tighten antenna and put in most direct line of sight to other radio Red Indicator LED is not

• Bindicator RS-485, 150 Venture Boulevard Spartanburg, SC 29306 Tel: (800) 778-9242 Fax: (864) 574-8063 [email protected] www.bindicator.com 2014 All rights reserved. All data subject to change without notice. WRL180213 Rev. B

Related Products and Documents (Radio):

Comparable Devices:

Similar Resources:

• Alinco DR-1200T (2 pages) -THE DR-1200T PROVIDES 25W RF OUT-‘UT WITH HI/LOW POWER SELECTIONSWITCH.140(W) x 40(H) x 170( D)mm (5-l/2” x 2” x6-3/4”) AT 2.25 Ibs.THE UNIT CONTAINS 14 FULLY PRO-GRAMMABLE MEMORY CHANNELS.EACH CHANNEL STORES OPERATINGFREQUENCY,STANDARD OFFSET,AND OTHER USEFUL INFORMATION.ILLUMINATED LCD DISPLAY WITHFUNCTION INDICATORS.FOR EASE OF OPERATION 5, 10, 1 …

• Nera CompactLink Series (156 pages) 6HFWLRQ,    (TXLSPHQW'HVFULSWLRQ6HFWLRQ,,    ,QVWDOODWLRQ6HFWLRQ,,,    2SWLRQDO$FFHVVRULHV6HFWLRQ,9    &RPPLVVLRQLQJ6HFWLRQ9    &,73DJHV2 …

• Peaq PDR220-B (122 pages) Imtron GmbHWankelstraße 585046 IngolstadtGermanywww.imtron.euwww.peaq-online.comDEBedienungsanleitungFRMode d’emploiELΟδηγίες χρήσηςHUKezelési leírásENUser ManualITManuale dell’utenteESManual de instruccionesDeutsch 3 - 19Ελληνικά 20 - 36English 37 - 53Español 54 - 70Français 71 - 87Magyar 88 - 104Italiano 105 - 121Internet Rad …

• Madison MAD-RETRORADIO (10 pages) 1 VINTAGE RADIO RADIO VINTAGE NOSTALGIERADIO NOSTALGIERADIO MAD-RETRORADIO (10-5565) GB – User Manual F – Manuel d’Utilisation D – Bedienungsanleitung NL - Handleiding RO – Manual de utilizare SK – Návod na použitie ES – Manual de usuario IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to …

• Beyerdynamic Opus 910 (152 pages) Opus 910DRAHTLOSES MIKROFONSYSTEMWIRELESS MICROPHONE SYSTEM SYSTÈME DE MICROPHONE SANS FILSISTEMA INALÁMBRICOBedienungsanleitungOperating InstructionsMode d’emploiManual del usuario …

• Hama IR350 (61 pages) FDGBEQuick GuideKurzanleitungNotice d’utilisationInstrucciones brevesКраткое руководствоIstruzioni breviBeknopte bedieningsinstructiesΣύντομες οδηγίεςKrótka instrukcja obsługiRövid útmutatóStručný návodStručný návodInstruções resumidasKısa kullanım kılavuzuInstrucțiuni scurteSnabbguideLyhyt ohjeKort vejledn …

Comments, Questions and Opinions: