Manualios.com

BK Radio DPHX Owner's Manual

BK Radio DPHX Manual Online:

3.7, 1828 votes
BK Radio DPHX User Manual
BK Radio DPHX User Guide
BK Radio DPHX Online Manual

Text of BK Radio DPHX User Guide:

  • DPHX DIGITAL PORTABLE RADIO Owner’s Manual © Copyright 2006 RELM Wireless Corporation. All rights reserved. P/N 7001-30958-100 12-04 BK Radio 7100 Technology Drive West Melbourne, FL 32904 Telephone: (321) 984-1414 FAX: (321) 984-0434 www.relm.com

  • BK Radio DPHX, DPH x Owner’s Manual 3 TABLE OF CONTENTS Features ..................................................................Inside Front Cover Introduction.........................................................................................4 FCC Requirements .............................................................................4 Safety Precautions..............................................................................4 RF Energy Exposure Awareness And Control Information.............

  • BK Radio DPHX, 4 BK Radio INTRODUCTION CONGRATULATIONS, you now own a BK Radio DPH x APCO Project 25 digital radio. To meet backwards compatibility as defined by the APCO Project 25 standard, the DPH x digital portable radio provides users the ability to interoperate with narrow or wide band analog channels as well as digital systems. Please take a moment to read the information in this manual so you can get optimum performance from your new ra

  • BK Radio DPHX, 44 BK Radio DEFINITIONS AND ACRONYMS AES APCO Project 25 Advanced Encryption Standard ANI Automatic Numeric Identification CG Channel Guard CLR Clear Cloning The process of copying data from one radio, called “master,” to other radios, called “slaves” or “clones.” Channel Guard A sub-audible tone, a code (analog) or a Network Access Code (digital) for selective calling and receiving. DES APCO Project 25 Encry

  • BK Radio DPHX, 6 BK Radio FEDERAL COMMUNICATIONS COMMISSION REGULATIONS The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for portable 2-way radios before they can be marketed in the U.S. When 2-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness informati

  • BK Radio DPHX, 42 BK Radio SCAN LIST CLONING When a Master radio downloads to a Clone, the Scan List is also transferred. See page 20 in this manual for selecting the Scan List. SECURE PARAMETERS CLONING When a Master radio downloads to a Clone, the following secure parameters are transferred: • Transmit Secure Mode • Transmit Key Reference • Transmit Key Lock Only key references are transferred. Key data is NOT transferred. Care must be taken to ensure that Master and Clone radios are configured with the same key data usin

  • BK Radio DPHX, 8 BK Radio RADIO CONTROLS BK RADIO 1 2 3 4 5 6 7 8 9 0 * # CLR FCN PRI ENT PRIORITY BUSY CHANNEL LOW BATTERY INDICATOR TRANSMIT INDICATOR ANTENNA HI/LO TRANSMIT POWER SCAN PRIORITY ANTENNA ACCESSORY MOUNT EARPHONE PTT (PUSH TO TALK) SPEAKER MICROPHONE LCD DISPLAY CHANNEL SELECT ON/OFF VOLUME SQUELCH CODE GUARD G R P PRG TX RX SCN ID CG DPH RADIO WITH KEYBOARD/DISPLAY COVERED OR NOT INSTALLED (REDUCED VIEW) BK RADIO CG- OFF- SQ VOL 161 2 3 4 5 6 7 8 9 10 11 12 13

  • BK Radio DPHX, 40 BK Radio 8. Turn on the Clone and set it to the desired channel group. 9. Press the [*] key on the Master radio keypad. The display will flash ‘PROG’ signifying that the radio is ready to download its program to the Clone. 10. Press the [FCN] key on the Master radio keypad. The program in the Master will then be downloaded to the Clone. 11. If the download was successful, the display on the Master will resume flashing ‘PROG’. • To clone another channel group, turn off both radios and go back to Step

  • BK Radio DPHX, 10 BK Radio CHANNEL GUARD OPERATION ANALOG SQUELCH CONTROL Sub-audible signaling (CTCSS/CDCSS) is used to allow a group of radios to be selectively called in a system. Programming the receive guard equal to zero allows for Carrier Squelch operation, where the radio will unmute whenever a carrier is detected. APCO PROJECT 25 SQUELCH CONTROL Network Access Codes (NACs) provide the digital equivalent of analog

  • BK Radio DPHX, 38 BK Radio DISPLAY BACKLIGHTING The DPH x radios can be programmed by your dealer to backlight the display when a signal is received or when a key is pressed. The time duration of the backlighting can also be programmed. CHANNEL LABELS You can program the radio with a label for each of the 25 channel groups and a label for each of the 16 channels within each group. To display the channel number associated with a channel label: 1. Press the [#] k

  • BK Radio DPHX, 12 BK Radio CHANNEL GUARD TRANSMIT 1. Turn the Squelch knob on (clockwise) and monitor the Channel Guard channel before transmitting, or, if Busy Channel operation is enabled, check the yellow LED. NOTE: Do not transmit if the channel is busy. 2. Press the PTT switch. When the transmitter is on, the red Transmit Indicator glows and TX appears in the display. 3. If monitoring the channel, reset the squelch knob to the Channel Guard position to receive only the messages with the proper Channel Guard value. During

  • 36 BK Radio When scanning or priority scanning Channel Guard channels with the Squelch knob in the Channel Guard position and activity has been detected, the Busy Channel Indicator glows for the time period necessary to determine if the proper Channel Guard value has been received. T

  • BK Radio DPHX, 14 BK Radio The display indicates Secure Operation as follows: 1. In Standby Mode, if the radio will transmit in Secure Mode when PTT is pressed, the encrypt icon flashes in the display. 2. When receiving or transmitting an encrypted signal, the encrypt icon flashes in the display. TRANSMIT KEY SELECTION The radio can hold up to 32 DES or AES encryption keys. Each channel is assigned a default key for transmit. The key can be locked to the channel, or if program

  • 34 BK Radio SCAN DELAY Scan delay lets the radio receive a response to a transmission before scanning the other channels for activity. If you find that your scanner is restarting before message replies are received, you can ask your dealer to increase the scan delay

  • BK Radio DPHX, 16 BK Radio 2. Press a number key for the new group number. Only valid group entries will be accepted. When changing groups, invalid entries will not be accepted, and the radio remains in the previously selected group. 3. Press the [ENT] key or wait 5 seconds. The radio returns to normal operation for the new group, and the selected channel is displayed. All selected scanning and priority f

  • BK Radio DPHX, 32 BK Radio EMERGENCY CALL Note: Emergency operation only applies to channels programmed for Digital or Mixed Mode transmissions. If the channel is programmed for Mixed Mode transmissions, the ‘TX Digital’ switch must be ON. To place an emergency group call, press and hold the emergency button until the radio beeps and the display flashes. On some models, the emergency button may be the [PRI] key. All scanning and priority scanning functions will be disable

  • BK Radio DPHX, 18 BK Radio To access functions on the keypad FCN key menu: 1. Press the [FCN] key to display the function menu. 2. Repeatedly press [FCN] to step through the menu. 3. Press [PRI] to toggle the function on/off when the desired menu item is displayed. When the display flashes, the function is enabled. KEYPAD LOCK To lock/unlock the keypad, press and hold the [FCN] key. When locked, ‘LOCKED’ will be displayed if a key is pressed and a low beep will sound. LOCKOUT EXCEP

  • BK Radio DPHX, 30 BK Radio UNIT-TO-UNIT CALLBACK If Unit-To-Unit callback is enabled, and a Unit- To-Unit call is received on the Ready-to- Transmit (RTX) channel, the user may press PTT before the hold time expires, causing the radio to enter Unit-To-Unit Mode and transmit using the received ID as the destination ID. If the callback timer expires before PTT is pressed, the radio will return to normal Operating Mode, but the phone icon will flash until the [*] key is pressed, bringing up the last active ID. To exit Unit-To-Unit Mode, press and hold the [*] key. The callback timer can be c

  • BK Radio DPHX, 20 BK Radio 2. Press and hold the PTT switch and talk in a normal voice. When the PTT switch is released, the radio continues to monitor the selected channel for the preset scan delay time before it resumes scanning. TALKBACK SCAN If your radio is programmed for Talkback Scan, press PTT while a channel is active or while scan delay time remains. You will be responding on the transmit frequency of the received channel. Talkback Scan will not work if Priority Scan is also on and your radio is programmed to always

  • BK Radio DPHX, 28 BK Radio To speak to the interrupting caller, press [*] to make the last active ID the new default transmit ID. When a group call (or, if allowed, an analog signal) is received, the radio will display the RTX channel’s label for the duration of the reception. If the RTX channel’s Digital Squelch Mode is set to ‘normal’, the radio performs as when the Squelch Mode is ‘selective’, except all individual calls will be re

  • BK Radio DPHX, 22 BK Radio value is present. If the signal contains the proper Channel Guard value, the radio receives the message. Otherwise, the radio will re-check the channel every 4 seconds, until the activity on the channel ceases. DUAL PRIORITY SCAN In each group, up to two of the 16 channels can be designated as priority channels. These two, PR1 and PR2, are periodically tested for activity, even if a different transmission is being listened to. Activity on PR2 preempts activity on any of the non-priority channels. Receptions on PR1 have priori

  • 26 BK Radio To reply to a message on the priority channel, press the PTT switch. The radio transmits only on the priority channel when Switch C (priority) is up. Once activity has ceased on the priority channel, the radio returns to scan operation. CHANGE THE PRIOR

  • 24 BK Radio Priority Mode A With Scan In Priority Mode A, the priority channel is set by the Channel Selector knob. Priority Mode A is seldom used by itself because the radio receives and transmits only on the knob-selected channel. When Switches B (scan) and C (priori

More Instructions:

DOWNLOAD

Related Products and Documents (Portable Radio):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Epson 5550C - PowerLite SVGA LCD Projector Product information epson/5550c-powerlite-svga-lcd-projector-K6J.pdf 13 Jul 2022 6 0.27 Mb
2 HP Pavilion a200 - Desktop PC Product specifications hp/pavilion-a200-desktop-pc-B3H.pdf 02 Jul 2023 1 0.62 Mb
3 Zanussi ZVC 200 S Instruction booklet zanussi/zvc-200-s-Q8M.pdf 14 Dec 2022 8 0.25 Mb
4 Midland CT2000 Instruction manual midland/ct2000-3I8.pdf 26 Jun 2023 38
5 ON Semiconductor NCV8871BSTGEVB Operation & user’s manual on-semiconductor/ncv8871bstgevb-G74.pdf 03 Oct 2023 7
6 Boss GP-10 Parameter manual boss/gp-10-A51.pdf 24 Sep 2022 11

Similar Resources:

  • Audizio

    Anzio Series

    (36 pages)
    Anzio Portable DAB+ BT FM Ref. nr.: 102.206 & 102.208 INSTRUCTION MANUAL GEBRUIKSAANWIJZING BEDIENUNGSANLEITUNG MANUAL DE INSTRUCCIONES MANUEL D'INSTRUCTIONS V1.0 …
  • Ericsson

    LBI-33056

    (14 pages)
    Maintenance ManualAEGISTM EDACS® M-PATMUHF PORTABLE RADIOLBI-33056TABLE OF CONTENTSRear Cover Assembly . . . . . . . . . . . . . . . . . . . . . . . LBI-38383Front Cover Assembly (Later) . . . . . . . . . . . . . . . . . . . LBI-38834Control Board . . . . . . . . . . . . . . . . . . . . . . . …
  • Kenwood

    TH-K40A

    (68 pages)
    INSTRUCTION MANUAL© B62-2365-00 (K, E, M)09 08 07 06 05 04 03 02 01 00TH-K40ATH-K40E430 MHz FM TRANSCEIVERNOTIFICATIONThis equipment complies with the essential requirements of Directive 1999/5/EC.The use of the warning symbol means the equipment is subject to restrictions of use in certain countries.This equipment requires a licence and is intended for u …
  • Radio Shack

    21-1679 A

    (20 pages)
    21-1679APlease read this user’s guide before installing, setting up and using your new CB radio.www.radioshack.comThank you for purchasing your Weather Alert Handheld CB Radio from RadioShack.What’s IncludedCB RadioNi-MH Battery PackAA Battery CaseAC ChargerAntennaHand StrapBelt ClipUser’s GuideFCC RulesWeather AlertHandheld CB RADIO21-1679A_En_111207. …
  • Tivoli Audio

    PAL +

    (2 pages)
    OWNER'S MANUALThe PAL uses a sealed pack of 6 high capacity Nickel Metal Hydride (NiMH) cells. Unlike NickelCadmium (NiCd) batteries, NiMH batteries have no memory effect, provide a longer operating time, anddo not use toxic metals. The front panel green LED serves both as a power indicator and battery powerand charge status indicator thanks to the PAL� …
  • Sony

    DVP-FX74

    (2 pages)
    DVP-FX747" (Diag.) Portable DVD Player Key Features7-inch (diag.) widescreen monitor 3-hour rechargeable battery 1 Unique textured designMultiple format disc playback2 2 built-in headphone jacks 3 Car adaptor includedDisc resumeRemote control includedA/V output12-bit/108MHz Video DACKey Technologies7-inch widescreen monitor: Enjoy entertainment on t …

Comments, Questions and Opinions: