Manualios.com

Intelligent Home DT6913SD Operation & User’s Manual

Intelligent Home DT6913SD Manual Online:

4.55, 1336 votes
Intelligent Home DT6913SD User Manual
Intelligent Home DT6913SD User Guide
Intelligent Home DT6913SD Online Manual

Text of Intelligent Home DT6913SD User Guide:

  • Intelligent Home DT6913SD, PRECAUTIONS ● Read this manual through before using the product. ● Slots or openings in the back of the monitor, are provided for ventilation and to ensure reliable operation of the video monitor or equipment and to protect if from overheating. These openings must not be blocked or covered. The monitor should never be placed near or over a radiator or heat register and should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided. ● All parts should be protected from violence vibration. And not allow be impacting, knocking and dropping. ● For clean the LCD screen, using hands or wet cloth is forbidden. ● Please do the cleannes

  • Intelligent Home DT6913SD, CONTENT 1. Monitor Parts and Functions ------------------------1 2. Monitor Mounting --------------------------------1 3. System Connection- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2 4. Multiple Monitors Connection ------------------------3 5. Multiple Door Cameras Connection -------------------4 6. Talk/Unlock Operation -----------------------------5 7. Ring Tone Setting --------------------------------6 8. Monitor Time Setting ------------------------------6 9. Auto-Record ------------------------------------7 10. Time Setting -----------------------------------7 11. Restore to Defa

  • Intelligent Home DT6913SD, -1- 1. Monitor Parts and Functions 2. Monitor Mounting TALK UNLOCK CALL INI-USE MESG UP button DOWN button ENTER button (+)ADD button (-)REDUCE button Microphone CALL button UNLOCK button TFT screen MONITOR/TALK button IN-USE/MESG LED Speaker 1 2 3 4 5 6 ON DIPS SW+ SW- RING GND VIDEO BUS Ventilation Vent Extend Port Connection Port DIP Switches Mounting Hook Dimension: 153(H)×250(W)×30(D) 145~160 cm 1. Use the screws to x the Mounting Bracket on the wall.(tting accesories includes a Bracket ) 2. Wire the system correctly(see the later co

  • Intelligent Home DT6913SD, -2- 3. System Connection Note 6 Note 4 Camera Monitor Note 2 Note 5 Note 3 Note 1 - + L1 L2 PL S1+ S2+ S- AC~ 1 2 3 4 5 6 ON DIPS SW+ SW- RING GND VIDEO DPS PS5 ● Note 1: Mount the DPS and PS5 side by side on the DIN nail or on the wall. ● Note 2: See Door Camera manual for detail information. ● Note 3: Connect the DPS to the output of PS5, non-polarity connection. ● Note 4: The bit-1 to bit-5 DIP switches are for Monitor address settings when multiple Monitors installed, the bit-6 is for video impedance setting. When there is only one Moni

  • Intelligent Home DT6913SD, -3- 4. Multiple Monitors Connection Note 1 Note 6 Note 2 Note 3 Note 4 Note 5 Note 7 L1 L2 PL S1+ S2+ S- AC~ 1 2 3 4 5 6 ON DIPS SW+ SW- RING GND VIDEO 1 2 3 4 5 6 ON DIPS SW+ SW- RING GND VIDEO 1 2 3 4 5 6 ON DIPS SW+ SW- RING GND VIDEO 1 2 3 4 5 6 ON DIPS SW+ SW- RING GND VIDEO 1# Monitor 2# Monitor 3# Monitor 4# Monitor DPS Camera PS5 ● Note 1: The Slave Addr Set on the 1# Monitor set to 0. ● Note 2: The Slave Addr Set on the 2# Monitor set to 1. ● Note 3: The Slave Addr Set on the 3# Monitor set to 2. ● Note 4: The

  • Intelligent Home DT6913SD, -4- 5. Multiple Door Cameras Connection Note 1 Note 2 L1 L2 PL S1+ S2+ S- L1 L2 PL S1+ S2+ S-L1 L2 PL S1+ S2+ S-L1 L2 PL S1+ S2+ S- AC~ 1 2 3 4 5 6 ON DIPS SW+ SW- RING GND VIDEO 1 2 3 4 5 6 ON DIPS SW+ SW- RING GND VIDEO 1 2 3 4 5 6 ON DIPS SW+ SW- RING GND VIDEO 1 2 3 4 5 6 ON DIPS SW+ SW- RING GND VIDEO 1# Camera2# Camera3# Camera4# Camera DPS PS5 A B C D BUS DBC4 ● Note 1: The settings for all the Monitors are the same as chapter 4 Multiple Monitors connection. ● Note 2: The DB

  • Intelligent Home DT6913SD, -5- 6. Talk/Unlock Operation 2. Press TALK/MON Button or TALK icon, you can talk with the visitor for 90 seconds. During talking state, press the TALK/MON Button again or press EXIT icon to end the conversation. If nobody answers the phone, the screen will be turned off automatically after 30 seconds. If the system connects two or more Monitors, when any Monitor starts to talk, the other Monitors will be automatically shut off. 1. When visitor presses the Call Button A(or B) on the Outdoor Station, the Monitor(or B) will ring, at the same time, the

  • Intelligent Home DT6913SD, -6- 7. Ring Tone Setting 8. Monitor Time Setting play monitor setup exit play monitor setup exit Outdoor Tone -- 01 Monitor Time -- 1min Intercom Tone -- 05 Advanced Set... Auto Record -- OFF Exit Outdoor Tone -- 01 Intercom Tone -- 05 Monitor Time -- 1min Advanced Set... Auto Record -- OFF Exit 15 pieces ring tone can be selected. When the Monitor is in standy, press anywhere on the screen, a full screen calendar will be showed. Monitor Time is the maximum monitoring time when the TALK/MON Button is pressed in standby, after whic

  • Intelligent Home DT6913SD, -7- 9. Auto-Record 10. Time Setting play monitor setup exit Outdoor Tone -- 01 Intercom Tone -- 05 Monitor Time -- 1min Advanced Set... Auto Record -- OFF Exit 0 * * * Password: 8 7 6 # 0 9 3 2 1 * 5 4 Outdoor Tone -- 01 Intercom Tone -- 01 Monitor Time -- 1min Advanced Set... Auto Record -- OFF Exit TIME DATE 2 0 0 9 1 0 2 1 1 1 3 5 : 8 7 6 # 0 9 3 2 1 * 5 4 When the Auto-Record function is turned on, a 10 seconds video will

  • Intelligent Home DT6913SD, -8- 11. Restore to Default 12. Screen Setting Exit Hardware Ver 0502 Software Ver 0180 Voltage 20.8V Manufacture 00.0 Restore to default Scene soft + — Ratio 16:9 + — Brightness 6 + — Colour 6 + — Ring Volume 6 + — Talk Volume 7 + — Slave Addr Set -- 0 Guard Unit Set -- 0 Date/Time Set... Other Settings... Information... Exit In the Information menu, press Restore to default item, the default settings will be loaded. press Exit to exit out the menu. The restor

  • -9- This Monitor has been equipped with a buit-in memory (about 118 MB, 50 ASF videos) together with a SD card reader. Maximum 2 GB SD card can be supported. When a new SD card was inserted to the Monitor, the SD card will be formated to FAT32 le system and 2 le folder(named DCIM and PHOTO) will be created. ● This Monitor can play back JPEG photos and ASF videos.

  • Intelligent Home DT6913SD, -10- 1 2 3 4 5 play monitor setup exit 1 2 3 4 5 FLASH: 1% VIDEO: 3 PHOTO: 21 VIDEO: 18 SD CARD: 5% 1 2 3 4 5 When the Monitor is in standby, press the screen to enter Main menu then enter PLAY menu. Press the icon to enter. 1. Play back photo 2. Play back video 3. Copy videos from built-in memory to SD card (SD-->DCIM-->101MEDIA folder) 4. Memory information 5. Exit Press the icon to play the video/photo. When playing videos, there is no sound at rst, press the TALK/MON Button to play the sound. 1. Play back last photo/video 2. Play back next photo/video 3. Delete currrent photo/video 4. Enter screen setting Menu 5. Exit 1. Used built

  • Intelligent Home DT6913SD, -11- 14. Unlock setting 15. Intercom Calling Unlock Time: the Unlocking time setting, default is 1 second. Unlock Mode: set to 0 if using a Power-on- to-Open type lock, set to 1 if using a Power- off-to-Open type lock. Settings will be performed immediately, press Exit item to exit. Intercom calling can be started on any Monitor, users can call a specific Monitor using the on screen name list. Goto and enter Main-->Setup-->Advanced set-->Information page, while the information page is displaying

  • Intelligent Home DT6913SD, -12- 16. Connection Other Device to Monitor Additional door bell call button can be connected to the Monitor, so that the visitors can ring the door bell again in front of the user's apartment. When the call button is pressed, the Monitor will output ring tones but the screen will keep off, and the external ringer will ring at the same time(if a external ringer is installed). Door bell call button SW+ SW- EXT-RING GND VIDEO External ringer can be connected to the Monitor. The ringer will ring whenever the Door Station call button or the door bell call button is pressed, and it will stop ringing when the Monitor rejucted or answered the call. - + 12Vdc 300mA Ex

  • Intelligent Home DT6913SD, -13- 17. Specifications Monitor ● Power supply for indoor monitor: DC 24V (supplied by Adaptor) ● Power consumption: Standby 0.5W; Working status 15W ● Monitor screen: 7 Inch color TFT-LCD ● Display Resolutions: 1,440(R, G, B) x 234 pixels ● Built-in Memory: 118 MB(only for DT692SD) ● Recorded Video format: ASF, 320*240 pixels, 10 seconds ● Monitor time: 30 seconds to 10 minutes ● Talking time: 30 seconds ● Monitor Dimensions: 153(H)×250(W)×30(D)mm Door Camera ● Lock Power supply: 12Vdc, 300

  • WARRANTY CARD NB Please keep this document safe, as it is proof of your Warranty Your Video door system comes with a one year Manufacturers Warranty. When used normally, the following services are offered: 1. Replacement for malfunctioning parts in rst three months 2. Repair free of charge for malfunctioning parts in rst year The following actions will void the Warranty: 1. Dam

Related Products and Documents (Intercom System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Audio Technica AT3031 Specifications audio-technica/at3031-I44.pdf 02 Feb 2023 1 0.1 Mb
2 Jenn-Air JDS9860BD Installation instructions jenn-air/jds9860bd-GTK.pdf 10 Sep 2022 2
3 Scytek electronic Vectra X3 Product manual scytek-electronic/vectra-x3-7Z5.pdf 01 Oct 2022 28 0.44 Mb
4 Elektra Beckum TP 5400 Bruksanvisning elektra-beckum/tp-5400-U84.pdf 27 Aug 2023 7 0.48 Mb
5 TRENDnet 21000BASE-T Operation & user’s manual trendnet/21000base-t-37G.pdf 06 May 2023 46 0.5 Mb
6 Dometic GarageVac DI-GH120 series Installation & operation instructions dometic/garagevac-di-gh120-series-5W7.pdf 24 Mar 2024 12

Similar Resources:

  • Aristel

    SS91A-M

    (13 pages)
    SS91A-M GSM Door Phone 1 Revision 2.20, April 2011 ARISTEL NETWORKS PTY LTD. MANUAL GSM DOOR PHONE SS91A-M GSM DOOR PHONE (ACCESS CONTROL SYSTEM) For your protection, read these instructions completely And keep them for future reference. …
  • Entryvue

    13505

    (7 pages)
    VIDEO DOOR PHONE SYSTEMUSER MANUAL (English)Item No. : 13505Ver sion2.0. 1.1.3 .28The design and specifications can be changed without notice to users.Copyright of this manual is reserved. …
  • Security Brands

    Ridge RTE 14-RTE433

    (4 pages)
    1 of 4Model 14-RTE433QUICK START GUIDE2Make sure you have all items shown here. (Screwdriver not shown)START HERE1Carefully unpack box.Key SwitchFor enabling and disabling unit(Unit is disabled as shown)Exit ButtonTriggers gate/door to openLockFor securing interior of RTE unitRTE Unit Front Panel (Front)RTE Unit Front Panel (Back)Internal wiring not shown fo …
  • TekTone

    NC403TS

    (21 pages)
    www.tektone.comPhone: 828.524.9967Toll-Free: 800.327.8466Sales: Option 2Tech Support: Option 3324 Industrial Park RdFranklin, NC [email protected]: 828.524.9968IL1052Rev. 2 - 4/2021NC403TS MonitorandNC404TS Master StationInstallation and Operation Manual …
  • Wahsega Labs

    Carina WL-IC-SMT-SIP-I-W-R-CAR

    (26 pages)
    www.wahsega.com Carina Indoor Surface Mount IP Intercom User’s Guide Getting Started This step-by-step guide will help you configure your Wahsega Indoor Surface Mount IP Intercom. …
  • Videx

    4000 Series

    (16 pages)
    66251360 - V4.0 - 15/09/19- 1 -4000 SeriesArt.4303N - Installation instructionsArt.4303N Speaker unit module with built-in functional to digital interfaceWhiteRedBlueDABCFig. 1 FrontWhiteRedBlueLMJ IKGHFEFig. 2 BackDESCRIPTIONFunctional speaker module for up to 64 traditional call buttons. The unit circuitry incorporates :• The transmitting ampli …

Comments, Questions and Opinions: