Intelligent network solutions 524445 Operation & User’s Manual

Text of Intelligent network solutions 524445 User Guide:

• 7 SYSTEM & NETWORK SETUP NOTE: If this procedure is successful, skip the following subsections and proceed to 2.3 Using Quick Setup. If the above procedure doesn’t result in your obtaining an IP address, or if you know that your computer has a static IP address setup, follow the steps in the appropriate subsection below. 2.2.1 Windows XP IP Address Setup 1. Clic

• Intelligent network solutions 524445, 27 SYSTEM & NETWORK SETUP preferred DNS server or use a static IP address, or if your service provider didn’t assign the IP address of the DNS server for any reason, you can input the IP address of the DNS server here. Primary DNS — Enter the IP address of the DNS server provided by your ISP. Secondary DNS — Enter the IP address of the secondary DNS server provided by your ISP. (optional) NOTE: Only an IP address can be entered here; do not use the hostname of the DNS server! (Only numeric characters and periods are accepted; for example, 10.20.30.40 would be acceptable, but dns.ser

• Intelligent network solutions 524445, 23 SYSTEM & NETWORK SETUP 2.5.1 Setup Procedure for Dynamic IP Host Name — Enter the host name of your computer. (This is optional and is only required if your service provider asks you to do so.) MAC Address — Enter the MAC address of your computer if your service provider only permits a computer with a certain MAC address to access the Internet. If you’re using the computer to connect to the Internet via cable modem, you can simply click “Clone MAC” to ll the “MAC Address” eld with the MAC address of your computer. 2.5.2 Setup Pro

• Intelligent network solutions 524445, 36 SYSTEM & NETWORK SETUP 2.7.3.3 Wi-Fi Protected Access (WPA) Pre-Shared Key WPA Unicast Cipher Suite — Once you select one of the three ciper options — “WPA (TKIP),” “WPA2 (AES)” or “WPA2 Mixed” — make sure your wireless clients support it. Pre-shared Key Format — Select the type of pre-shared key from the drop-down menu: “Passphrase” (8 or more alphanumerical characters, up to 63) or “Hex” (64 characters of 0-9 and a-f). Pre-shared Key — Enter the WPA passphrase. NOTE: As mentioned earlier, try to a

• Intelligent network solutions 524445, 62 TROUBLESHOOTING My wireless notebook cannot see or connect to the wireless network. • Check if Broadcast ESSID is off. Remember that you need to input the ESSID on your wireless client manually if the ESSID broadcast is disabled. • Check that you’ve securely attached the antenna(s). • Make sure that you’re not too far away from the router. I can’t log on to the Web management interface: The password is wrong. • Make sure you’re connecting to the correct IP address of the router. • The password is case-sensitive. Make sure the Caps Lock feature isn’t

• Intelligent network solutions 524445, 10 SYSTEM & NETWORK SETUP 2. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically,” then click “OK.” 2.2.3 Router IP Address Lookup 1. After the IP address is set up, click “Start” at the bottom-left of the desktop, then click “Run.”

• Intelligent network solutions 524445, 14 SYSTEM & NETWORK SETUP Daylight Savings — If your locale uses Daylight Saving, activate “Enable Function” and select the duration using the drop-down menus. Click “Next” to continue to the next screen of the Quick Setup procedure, where you select the broadband (Internet connection) type you use. There are six types of Internet connections available, as explained below: Cable Modem, Fixed IP xDSL, PPPoE xDSL, PPTP xDSL, L2TP xDSL and Telstra BigPond. Cable Modem and PPPoE xDSL are the most common, but if you’re not sure whic

• Intelligent network solutions 524445, 31 SYSTEM & NETWORK SETUP your network from intruders. Click the “Wireless” menu on the left of the Web management interface to open the wireless settings page. Remeber to click “Apply” to save your settings. 2.7.1 Basic Wireless Settings Band — Select one of the options from the drop-down m e n u : • “2.4 GHz (B)” only allows an 802.11b wireless network client to connect to this router (maximum transfer rate of 11 Mbps). • “2.4 GHz (N)” only allows an 802.11n wireless network client to connect to t

• 13 SYSTEM & NETWORK SETUP 2.3 Quick Setup The Quick Setup procedure lets you congure all the settings required for quick Internet access. . The initial Quick Setup screen presents time settings. Set Time Zone — Use the drop-down menu to select your time zone. Time Server Address — Enter the IP address/hostname of the time server. This isn’t normally required, but

• Intelligent network solutions 524445, 9 SYSTEM & NETWORK SETUP 2.2.2 Windows Vista/7 IP Address Setup 1. Click “Start,” then go to the control panel. Click “View Network Status and Tasks,” then click “Manage Network Connections.” Right-click “Local Area Network,” then select “Properties.” With the Local Area Connection Properties window displayed, select “Internet Protocol Version 4 (TCP / IPv4),” and click “Properties.”

• Intelligent network solutions 524445, 33 SYSTEM & NETWORK SETUP N Data Rate — Same as above, but only for 802.11n clients. Channel Width — Set the channel width of the wireless radio. NOTE: If you aren’t sure what this should be set to, leave it as the default setting (“Auto 20/40 MHz”). Preamble Type — Set the preamble type. NOTE: If you aren’t sure what this should be set to, leave it as the default setting (“Short Preamble”). Broadcast ESSID — Decide if the wireless router will broadcast its own ESSID. You can hide the ESSID of your wireless router (select “Disa

• Intelligent network solutions 524445, 48 ADVANCED FUNCTIONS 3.3 Firewall In addition to the NAT feature, this router provides rewall functionality to block malicious intruders from accessing the computers on your local network. Click the “Firewall” menu on the left of the Web management interface. Firewall Module — Check to enable this function; uncheck to disable. 3.3.1 Access Control This function allows or denies computers with a specic MAC address — or a specic IP address, protocol or port — access to the network. Enable MAC F

• Intelligent network solutions 524445, 39 SYSTEM & NETWORK SETUP This router supports two types of WPS: Push-Button Conguration (PBC) and PIN code. To use PBC, you need to push a specic button on the wireless client to start the WPS mode and switch this router to WPS mode. You can push the Reset/WPS button of this router, or click “Start PBC” in the Web conguration interface to do this. To use PIN code, you need to know the PIN code of the wireless client and switch it to WPS mode, then provide the PIN code of the wirel

• Intelligent network solutions 524445, 45 ADVANCED FUNCTIONS Type — Select the type of connection from the drop-down menu: “TCP,” “UDP” or “Both.” If you’re not sure which to use, select “Both.” Port Range — Enter the starting port number in the left eld and enter the ending port number in the right eld. To redirect a single port number, just enter the port number in the left eld. Comment — Enter text to describe this mapping, using up to 16 alphanumerical characters; e.g., “camera web por

• Intelligent network solutions 524445, 41 ADVANCED FUNCTIONS 3 ADVANCED FUNCTIONS 3.1 Quality of Service (QoS) Quality of service provides an efcient way for computers on the network to share the Internet bandwidth with a promised quality of Internet service. Without QoS, all computers and devices on the network compete with each other to get Internet bandwidth, and some applications which require guaranteed bandwidth (like video streaming and network telephone) are affected negatively, resulting in an interruption of video/audio transfers. QoS allows you to limit the maximum bandwidth or grant a guaranteed bandwidth for

• Intelligent network solutions 524445, 47 ADVANCED FUNCTIONS Current Trigger-Port Table — All the settings for the specifal applications are listed here. Delete — To remove a Special Application setting from the Current Trigger-Port Table, select the setting and click “Delete.” Delete All — Click to delete all existing specifal application settings. 3.2.4 UPnP This function enables network auto-conguration for peer-to-peer communications. With this function, network devices will be able to communicate with other UPnP- enabled devices directly and learn about

• Intelligent network solutions 524445, 12 SYSTEM & NETWORK SETUP 3. Enter “ipcong,” then press <Enter>. The IP address displays, followed by the default gateway. In the example below, the IP address of the router is 192.16 8. 2 .1. NOTE: If the IP address of the gateway is not displayed, or if the address begins with 169, recheck the network connection between your computer and the router, and re-check each step of the network setup procedure. 4. Once your computer has obtained an IP address from the router, open your Web browser and enter the IP address of the router into the address bar. When the login window displays (see 2.2 above), enter the username (“admin”) and

• Intelligent network solutions 524445, 37 SYSTEM & NETWORK SETUP “WPA (TKIP),” “WPA2 (AES)” or “WPA2 Mixed” — make sure your wireless clients support it. RADIUS Server IP address — Enter the IP address of the RADIUS server. RADIUS Server Port — Enter the port number of the RADIUS server. RADIUS Server Password — Enter the password of the RADIUS server. 2.7.4 Wireless Access Control This function helps to prevent unauthorized users from connecting to your router: Only those wireless devices that have the MAC address you assign here can gain

• Intelligent network solutions 524445, 59 ADDITIONAL FUNCTIONS Restore Settings — Click “Browse…” to select a saved conguration le from your computer, then click “Upload” to transfer the conguration le to the router. After the conguration is uploaded, the router’s current conguration will be replaced by the le you just uploaded. Restore to Factory Default — Click to reset all settings of the router to the factory default values. 4.2.2 Firmware Upgrade The rmware of the router is like the operating system on your computer. Firmware upgrades f

• Intelligent network solutions 524445, 66 SPECIFICATIONS - Special applications (port trigger) • Firewall: - Access control-based on MAC address - URL lter - DMZ (demilitarized zone) • Supports UPnP (Universal Plug and Play) • Supports DHCP (client/server) • Supports PPPoE (DSL), DHCP (cable) and static IP • Supports VPN PPTP, L2TP and IPsec passthrough • Certications: FCC Class B, CE Mark, RoHS Wireless • Wireless frequency range: 2.400 – 2.483 GHz • Modulation technologies: - 802.11b: Direct Sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK - 802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK,

• Intelligent network solutions 524445, 64 GLOSSARY ISP: Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or organizations. LAN: Local Area Network. A LAN is a group of computers and devices connected together in a relatively small area (such as a house or an ofce). Your home network is considered a LAN. MAC Address: MAC stands for Media Access Control. A MAC address is the hardware address of a device connected to a network, and is a unique identier for a device with an Ethernet interface. It is composed of two parts: three bytes of data t

• Intelligent network solutions 524445, 21 SYSTEM & NETWORK SETUP If the passwords entered in the “New Password” and “Conrmed Password” elds aren’t the same, you’ll see the message at right. Re-enter the new password. If you see the error message at right, it means the content in the “Current Password” eld is wrong. Click “OK” to go back to the previous menu, and try entering the current password again. If the current and new passwords are correctly entered, click “Apply” and you’ll be prompted to log in again. Enter the new password and enter “admin” for the username. 2.4.3 Remote Management This router by default does not a

• 52 ADVANCED FUNCTIONS Add — Click to add the URL/keyword to the URL/Keyword Filtering Table. Reset — Click to remove all entries in the “URL/Keyword” text eld. Current URL Blocking Table — All existing URL/keywords in the ltering table. Delete — Select a URL/keyword by checking the “Select” box of the entry, then clicking “Delete.” Delete All — Click to dele

• Intelligent network solutions 524445, 18 SYSTEM & NETWORK SETUP 2.3.5 Setup Procedure for L2TP xDSL L2TP is another popular connection method for xDSL and other Internet connection types, and all required setting items are the same as the PPTP connection (see section 2.3.4 above). 2.3.6 Setup Procedure for Telstra BigPond This procedure is only for the Telstra BigPond network service in Australia. User Name — Enter the username assigned by Telstra. Password — Enter the password assigned by Telstra. Assign login server manually — Select to choose the login server by yourself. Server IP Address — Enter the IP address of the login server. When all settings are nished (and after

Related Products and Documents (Wireless Router):

Comparable Devices:

Similar Resources:

• Vitriko LR77 v2 (37 pages) L T E router LR77 v2USER’S MANUAL, Anytime Anything Anywhere , , but always connected.Industrial 4G Router100 Mbps|WiFi|DUAL SIM|RS232|RS485 www.vitriko.comVITRIKOMobile Data Experts LTELR77 v2 Contact www.vitriko.com [email protected] …

• Polycom VVX 101 (196 pages) UC Software 5.5.0 | May 2016 | 3725-46211-006A USER GUIDEPolycom® VVX Business Media Phones Applies to Polycom VVX 101, 201, 300 Series, 400 Series, 500 Series, 600 Series, and 1500 Business Media Phones, Polycom VVX Expansion Modules, and Polycom VVX Camera …

• Intellinet 524704 (12 pages) WIRELESS-NACCESS POINT QUICK INSTALL GUIDE MODELS 524704,524728 & 524735 INT-524704/524728/524735-QIG-ML1-0809-02ENGLISH DEUTSCH ESPAÑOL FRANÇAISPOLSKIITALIANOModel 524704: 150N …

• Systech Corporation SL-500 (7 pages) 1 QS002‐002‐1706.Copyright2017.Informationsubjecttochangewithoutnotice.  SL‐500What’s Included PowerAdapter,5vCellularAntennas(ifpurchased)Note:Imagesmaydifferfromactualitems.SysLINK® 500 Family Quick Start Guide Includes SysSCRIPT Lite  IoT(Internet� …

• Luxul XWR-1750 (52 pages) Simply ConnectedUser GuideXWR-1750Dual Band WirelessAC1750 Gigabit RouterUse the XWR-1750 to: Deliver Next Generation 802.11ac Gigabit Wi-Fi with Speeds up to 1750Mbps Maximize Data Rates with Concurrent Dual-Band Technology Optimize VoIP, Streaming Media and Other Demanding Applications Create a Secure Guest Network Provide an Affordable Hig …

• Panasonic KX-TDE100 (174 pages) Model No. KX-TDE100KX-TDE200Pure IP-PBXInstallation Manual Document Version: 2010-08Thank you for purchasing a Panasonic Pure IP-PBX.Please read this manual carefully before using this product and save this manual for future use.KX-TDE100/KX-TDE200: PMMPR Software File Version 4.1000 or laterSD Logo isa trademark ofSD-3C, LLC. …

Comments, Questions and Opinions: