Manualios.com

Harbor Freight Tools 69667 Owner's Manual & Safety Instructions

  • 69667 Air Compressor
  • ma2bbyCKZsUH2
  • Owner's Manual & Safety Instructions
  • PDF / Adobe Acrobat Reader
  • 20

Harbor Freight Tools 69667 Manual Online:

3.1, 2970 votes
Harbor Freight Tools 69667 User Manual
Harbor Freight Tools 69667 User Guide
Harbor Freight Tools 69667 Online Manual

Text of Harbor Freight Tools 69667 User Guide:

  • Harbor Freight Tools 69667, Page 2 For technical questions, please call 1-800-444-3353. Item 69667 SAFETY OPERATION MAINTENANCESETUP Table of Contents Safety ......................................................... 2 Setup .......................................................... 6 Specifications ............................................. 6 Operation ................................................... 10 Maintenance .............................................. 12 Parts List and Diagram .............................. 18 Warranty ...............................

  • Harbor Freight Tools 69667, Page 3For technical questions, please call 1-800-444-3353.Item 69667 SAFETYOPERATIONMAINTENANCE SETUP IMPORTANT SAFETY INFORMATION General Safety Warnings WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions an

  • Harbor Freight Tools 69667, Page 4 For technical questions, please call 1-800-444-3353. Item 69667 SAFETY OPERATION MAINTENANCESETUP Air Compressor Safety Warnings 1. Risk of fire or explosion - do not spray flammable liquid in a confined area or towards a hot surface. Spray area must be well-ventilated. Do not smoke while spraying or spray where spark or flame is present. Arcing parts - keep compressor at least 20 feet away from explosive vapors, such as when spraying with a spray gun. 2. Risk of bursting - do not adjust regulator higher than marked maximum pressure of attachment. 3. Risk of injury - do not direct air str

  • Harbor Freight Tools 69667, Page 5For technical questions, please call 1-800-444-3353.Item 69667 SAFETYOPERATIONMAINTENANCE SETUP Grounding TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the compressor. Never remove the grounding prong from the plug. Do not use the compressor if the power cord or plug is damaged. If damaged, have it repaired b

  • Harbor Freight Tools 69667, Page 6 For technical questions, please call 1-800-444-3353. Item 69667 SAFETY OPERATION MAINTENANCESETUP Specifications Electrical Rating 120V~ / 60Hz / 12A Air Outlet Size 1 / 4 ″ -18 NPT Air Pressure Shut-off 125 PSI Restart 95 PSI Air Tank Capacity 8 Gallons Air Flow Capacity 4.5 CFM @ 90 PSI 5.5 CFM @ 40 PSI Oil Capacity 12 oz. Oil Type SAE 30W, non-detergent, Air Compressor Oil (sold separately) Sound Level 88 dB @ 3' 226892 Instructions for putting into use Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY

  • Harbor Freight Tools 69667, Page 7For technical questions, please call 1-800-444-3353.Item 69667 SAFETYOPERATIONMAINTENANCE SETUP Assembly/Mounting 1. Attach the Wheels to the Tank, using the Bolts and Hex Nuts. 2. Slide the Handle into the two slots on the top of the Tank and secure in place with four Bolts. 3. Thread the Air Filter onto the side of the Cylinder Head. 4. Check and Fill oil according to section below. 5. Break in the new Air Compressor as follows: a. Turn the Power Switch off and unplug the unit. Insert a male coupler (sold separately) into the female Quick Coupler and fully open all regulators and valves. b. Plug in the Power Cord. c. Turn the Power Switch ON. d. L

  • Harbor Freight Tools 69667, Page 8 For technical questions, please call 1-800-444-3353. Item 69667 SAFETY OPERATION MAINTENANCESETUP Figure C: Portable Air Supply Setup G A E E H F B Non-lubricated Tools Lubricated Tools A B C C D A Description Function A Air Hose Connects air to tool B Filter Prevents dirt and condensation from damaging tool or work piece C Regulator Adjusts air pressure to tool D Lubricator (optional) For air tool lubrication E Coupler and Plug Provides quick connection and release F Leader Hose (optional) Increases coupler life G Air Cleaner / Dryer (optional) Prevents water vapor from damaging work piece H Air

  • Harbor Freight Tools 69667, Page 9For technical questions, please call 1-800-444-3353.Item 69667 SAFETYOPERATIONMAINTENANCE SETUP Figure D: Stationary Air Supply Setup N L L O M C C Non-lubricated Tools Lubricated Tools H I I J J K H F G E Slope F F B B A A C D Description Function A Vibration Pads For noise and vibration reduction B Anchor Bolts Secures air compressor in place C Ball Valve Isolates sections of system for maintenance D Isolation Hose For vibration reduction E Main Air Line - 3/4″ minimum recommend

  • Harbor Freight Tools 69667, Page 10 For technical questions, please call 1-800-444-3353. Item 69667 SAFETY OPERATION MAINTENANCESETUP Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Compressor Area Set Up 1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent injury. 2. Locate the Compressor on a flat level surface to ensure proper pump lubrication and to prevent damage to the unit. Keep at least 12″ of space around the unit to allow air circulation. 3. Route the power cord from

  • Harbor Freight Tools 69667, Page 11For technical questions, please call 1-800-444-3353.Item 69667 SAFETYOPERATIONMAINTENANCE SETUP Emergency Depressurization If it is necessary to quickly depressurize the Compressor, turn the Power Switch OFF. Then, pull on the ring on the Safety Valve to quickly release stored air pressure. Automatic Shut off System 1. If the Compressor automatically shuts off before reaching its normal cutoff pressure: a. Shut off all tools. b. Wait until the Compressor cools down (about 10 minutes); c. If the unit does not start up again on its own, press the Reset Button to start the compressor; d. Resume operation. 2. Possible causes of repea

  • Harbor Freight Tools 69667, Page 12 For technical questions, please call 1-800-444-3353. Item 69667 SAFETY OPERATION MAINTENANCESETUP Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch “OFF” and unplug the Compressor from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM COMPRESSOR FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lub

  • Page 13For technical questions, please call 1-800-444-3353.Item 69667 SAFETYOPERATIONMAINTENANCE SETUP Oil Maintenance Check the oil periodically for clarity. Replace oil if it appears milky or if debris is present, or every 6 months, or 100 hours of runtime, whichever comes first. In harsh environments such as high heat or high humidity, you will need to

  • Harbor Freight Tools 69667, Page 14 For technical questions, please call 1-800-444-3353. Item 69667 SAFETY OPERATION MAINTENANCESETUP Troubleshooting Problem Possible Causes Likely Solutions Compressor does not start or restart 1. Tank(s) already pressurized. 2. Power cord not plugged in properly. 3. Incorrect power supply. 4. No power at outlet. 5. Thermal overload switch tripped. 6. Building power supply circuit tripped or blown fuse. 7. Cord wire size is too small or cord is too long to properly power compressor. 8. Compressor needs service. 1. No problem. Compressor will start

  • Harbor Freight Tools 69667, Page 15For technical questions, please call 1-800-444-3353.Item 69667 SAFETYOPERATIONMAINTENANCE SETUP Problem Possible Causes Likely Solutions Overheating 1. Air filters need cleaning/replacing. 2. Crankcase oil too thin or incorrect type. 3. Crankcase oil level too low. 4. Unusually dusty environment. 5. Extension cord used. 6. Unit not on level surface. 1. Check inlet and outlet filters. Clean and/or replace as needed. 2. Drain oil and refill to proper level with recommended oil. 3. Add oil to proper level, check for leaks. 4. Clean and/or replace filters more often or move unit to cleaner e

  • Page 16 For technical questions, please call 1-800-444-3353. Item 69667 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY

  • Page 18 For technical questions, please call 1-800-444-3353. Item 69667 SAFETY OPERATION MAINTENANCESETUP Parts List and Diagram Parts List Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually

  • Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Wharfedale Pro Diamond 9.0 Instruction manual wharfedale-pro/diamond-9-0-G45.pdf 20 Dec 2023 8
2 Clack WS1 Series Installation, operation & maintenance manual clack/ws1-series-Y5C.pdf 13 Jul 2023 16
3 Panasonic SA-HT440P Service manual panasonic/sa-ht440p-7R7.pdf 07 Nov 2022 111
4 Sky 325R6 Operating instructions manual sky/325r6-73O.pdf 25 Feb 2024 7
5 Anthem MRX520 Operating manual anthem/mrx520-R4N.pdf 05 Feb 2024 51
6 Whirlpool RBIOOOXV Use and care manual whirlpool/rbioooxv-428.pdf 02 Sep 2022 20 0.89 Mb

Similar Resources:

  • Rolair

    OILLESS AIR COMPRESSOR

    (11 pages)
    - 1 - OILLESS AIR COMPRESSOROWNER’S MANUAL WARNING COMPRESSOR DISCHARGE AIR MAY CONTAIN HYDROCARBONS AND OTHER CONTAMINANTS! DO NOT USE DISCHARGE AIR FOR BREATHING! PARTS Genuine ROLAIR replacement parts are sold nationwide through a network of authorized dealers and service centers. Please contact the dealership where your air compres …
  • CompAir

    L07RS

    (68 pages)
    Original Operating and Service Manual Screw Air Compressor L07 - L11, L07RS - L11RS L07FS - L11FS, L07RS FS - L11RS FS V2 ●GB ●CDN ●USA Id. no. ZS1066273 / 03 - December 2011 …
  • Faller

    AS18-2

    (12 pages)
    AIRBRUSH KOMPRESSOR 170986 AS18-2AIRBRUSH COMPRESSOR 170986 AS18-2DEENBEDIENUNGSANLEITUNG INSTRUCTION MANUALAnleitung_Airbrush Compressor_AS18-2.indd 1 11.12.18 14:03 …
  • Metasys

    META Tower Series

    (18 pages)
    META TowerGerätedokumentEinbau, Betrieb und WartungMETA TowerEquipment LogbookAssembly, operation and maintenanceMETA TowerLivret d’appareilInstallation, fonctionnement et entretienMETA TowerVerbale d’installazioneMontaggio, funzionamento e manutenzioneMETATOWEREN …
  • Mitsubishi

    WT-46807

    (16 pages)
    CAUTION:Before servicing this chassis, it is important that the service person read the "SAFETY PRECAUTIONS" and"PRODUCT SAFETY NOTICE" contained in this manual.MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.9351 Jeronimo Road, Irvine, CA 92618-1904Copyright © 2000 Mitsubishi Digital Electronics America, Inc.All Rights ReservedPROJECTIO …
  • Sealey

    SA5040

    (4 pages)
    Refer to instruction manualWear eye protectionWear earprotectionWarning:hot surfaceWear protectiveglovesThank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. …

Comments, Questions and Opinions: