CEECO IP-SSP-511- X Service Manual

Text of CEECO IP-SSP-511- X User Guide:

• CEECO IP-SSP-511- X, IP-HOB-531-X OR SSP-511-X-SPK1.07r1-ISSUE4.0 SERVICE MANUAL FOR VoIP MODEL IP-HOB-531-X HANDS FREE WEATHER RESISTANT TELEPHONE OR MODEL IP-SSP-511- X HANDS FREE STAINLESS STEEL PANEL TELEPHONE EQUIPPED WITH SPK1.07r1 FIRMWARE Serving the Telephone Industry Since 1930 Communication Equipment 519 West South Park Street & Engineering Company Okeechobee, Florida 34972 Voice: 863-357-0798 Fax: 863-357-0006

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 2 IMPORTANT INFORMATION FOR CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL IP-HOB-531-X OR SSP-511-X EQUIPPED WITH SPK1.07r1 FIRMWARE. SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support. CEECO Communication Equipment & Engineering Company 519 West South Park Street Okeechobee, Florida 34972 (863) 357-0798 Voice (863) 357-000

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 3 TABLE OF CONTENTS SECTION PAGE 1.0 INTRODUCTION................................................................................................. 4 2.0 GENERAL ............................................................................................................. 4 3.0 PROGRAMMING ................................................................................................ 5 PROGRAMMING CONTINUED ....................................................................... 6 PRO

• ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 4 1.0 INTRODUCTION The practices in this manual provide installation and maintenance information for the CEECO Voice Over Internet Protocol (VoIP) Model IP-HOB-531-X Hands free Weather Resistant Telephone or Model IP-SSP-511-X Stainless Steel Panel Telephone, equipped with SPK1.07r1 firmware. The in

• ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 5 3.0 PROGRAMMING 3.1 Remove the front stainless steel panel by loosening the four security screws with a security tool (sold separately) and remove them. Remove the panel and attached telephone assembly. 3.2 Connect the telephone to a working telephone line or a

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 6 PROGRAMMING CONTINUED LOCATION #00 Digit 1: Always 0 for this model. Digit 2: 0 No incoming calls allowed. 1 Incoming calls allowed. Digit 3: 0 No time-out disconnect 1-9 Minutes time-out disconnect Digit 4: Always 0 for this model Digit 5: Always 1 for this model Digit 6: Always 0 for this model. Digit 7: Always 0 for this model Digit 8: Always 0 for this model

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 7 PROGRAMMING CONTINUED 3.9 When you are finished programming, press the “CALL & HANGUP” button to hang up the phone. Return the two plastic mini-jumpers to the “OFF” or outermost position, as depicted on the last page of this manual. Secure the telephone assembly in the housing. The phone is now ready for use. 3.10 Refer to the INSTALLATION NOTES section ahead for details regarding the VoIP configuration setup prior to proceeding. 4.0 OPERAT

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 8 6.0 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS 6.1 Using a 301-064 security tool (sold separately) loosen and remove the security screws. 6.2 The security tool is for a standard 5/32" button head screw generally used on the framework of the phone booths. 6.3 Separate the faceplate assembly from the weather resistant housing or mounting by pulling the faceplate forward. The mounting box is designed to be mounted flush with a flat vertical surface. Mo

• ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 9 *****WARNING***** A. Never install telephone wiring during a lightning storm. B. The telephone must be grounded in accordance with local and national electric codes. C. Never install telephone jacks in wet locations unless the jack is specifically designed for

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 10 8.0 SPECIFICATIONS INPUT POWER: ATA powered LOOP CURRENT: 35 mA minimum 80 mA maximum IMPEDANCE: 600 ohms SIGNALING: Manual on-off hook ENVIRONMENTAL: Temperature 0o C to 50o C Humidity 20%-90% non-condensating PROGRAMMING: Via DTMF keypad. MEMORY RETENTION: Non-volatile memory retention DIMENSIONS: 7 1/6 wide x 11 1/4 high x 4 1/4 deep (SSP) MOUNTING: Vertical surface mount. WEIGHT: Approximately 4 lb. DIMENSIONS: 11.28" high x 7.080" wi

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 11 9.0 PARTS LIST QUANTITY PART NUMBER DESCRIPTION 4 331-006 OUTER COVER SECURITY SCREW 1 301-018 MODULAR LINE CORD 1 531-11075 FACE PLATE 1 700-008 KEYPAD CABLE 1 660-000 CEECO SPEAKER BOARD 1 705-110 CONNECTORIZED KEYPAD 1 14067 MICROPHONE. 1 6020 MOMENTARY PANEL SWITCH 1 14024 SPEAKER 1 HOB-

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 12 10.0 FCC NOTICE 10.1 FCC REGISTRATION AND REPAIR INFORMATION Your new telephone has been registered with the Federal Communication Commission (FCC) in accordance with Part 68 of its rules. The FCC requires that you be advised of certain requirements involving the use of this telephone. 10.2 CONNECTION WITH THE NATIONWIDE TELEPHONE NETWORK The FCC requires that you connect this telephone to the Nationwide Telephone Network through a registered jack provided by the Tele

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 13 11.0 REPAIR AND RETURN INFORMATION 11.1 WARRANTY REPAIR Any device returned requiring warranty service, repair or credit must be accompanied with a "Return Material Authorization" (RMA) FORM. It must include: return-shipping instructions, original purchase order number and special marking instruction. A description of the trouble observed must be attached to the defective unit. This information must be inside the shipping container. 11.2 DIRECT ALL INQUIRES TO: CEECO Repair Departme

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 14 12.0 WARRANTY POLICY 12.1 GENERAL CEECO products are guaranteed to be free of defects in material and workmanship for a period of 365 days from the date of original purchase. CEECO's obligation under this warranty is limited to repair or replacement of any part found to be defective by CEECO. Under no circumstances shall CEECO be liable for loss, damage, cost of repair or consequenti

• CEECO IP-SSP-511- X, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 15 13.0 DIAGRAM When programming is completed, move the mini jumpers to the OFF position. NOTE: Do not leave the mini jumpers in the ON position, this will decrease battery life. MOVE THE MINI JUMPERS TO THE ON POSITION BEFORE GOING OFF- HOOK. Locate the mini jumpers on the corner of the PCB. ON O FF ON O FF ON O FF

Related Products and Documents (IP Phone):

Comparable Devices:

Similar Resources:

• Zultys ZIP 33i (2 pages) 1. Press when the phone is idle, and then select ->2. Select the desired programmable key and then press .4. Press to accept the change.Press the speed dial key to call the preset number.3. Select from the field, select the desired line from the field, and enter the number in the field. You may add contacts from call history, re …

• Mitel 5330e (2 pages) © Copyright 2015, Mitel Networks Corporation. All Rights Reserved. The Mitel word and logo are trademarks of Mitel Networks Corporation.Any reference to third party trademarks are for reference only and Mitel makes no representation of the ownership of these marks.QUICK REFERENCE GUIDE QUICK REFERENCE GUIDEMITEL 5330e IP PHONE1 Brightness Control is availab …

• Panasonic KX-TDE600 (60 pages) Programming Manualfor Virtual SIP CO Line CardPure IP-PBXDocument Version: 2008-11Thank you for purchasing a Panasonic Pure IP-PBX.Please read this manual carefully before using this product and save this manual for future use.KX-TDE600KX-TDE600: PGMPR Software File Version 2.0000 or laterwww.voicesonic.comPhone: 877-289-2829Panasonic Telephone SystemsPanaso …

• HP 4110 (2 pages) hp officejet4110hp officejet 4110 printer/fax/scanner/copierA small, powerful all-in-one offering a range of impressive features including photo quality printingat up to 4800-optimised dpi*, 33.6 Kbps fax modem, 600 x 1200 dpi scanning and colour copies at up to 10 pages a minute.The HP Officejet 4110 is designed for home-office or small business users looki …

• Avaya J139 (6 pages) Quick Reference for AvayaJ139 SIP IP Phone in AvayaAura®Release 4.0.10Issue 1July 2021© 2020-2021, Avaya Inc.All Rights Reserved.Main menuThe following table lists the Main menu icons used inAvaya J139 IP Phone:Icons Name Description Features To access administratoractivated features. Applications • To access phoneapplications such asContacts, Recents, …

• CenturyLink Polycom 335 (2 pages) Polycom 335 Quick Reference Guide © 2013 CenturyLink. All Rights Reserved. The CenturyLink mark, pathways logo and certain CenturyLink product names are the property of CenturyLink. All other marks are the property of their respective owners. Polycom 3xx QRC – 050115rev1 Page 1 of 2 Getting Started Setting Up Your Voicemail Making Calls To: • Fr …

Comments, Questions and Opinions: