Manualios.com

Brother NC6100H Network User's Manual

Brother NC6100H Manual Online:

3, 963 votes
Brother NC6100H User Manual
Brother NC6100H User Guide
Brother NC6100H Online Manual

Text of Brother NC6100H User Guide:

  • 5 - 5 CONFIGURING INTERNET PRINTING FOR WINDOWS ® 7 The print server is configured by default to poll the POP3 server every 30 seconds. You may change this value, if desired. 8 If you have enabled notification, enter the address of your SMTP server (consult your network administrator if you do not know this address). 9 Click the OK button and save the changes. Now e

  • 1 - 5 UNIX PRINTING %lpc status laser1: queuing is enabled printing is enabled no entries no daemon present Users of AT&T-compatible UNIX systems can generally use the lpstat or rlpstat commands to obtain similar status information. Because this procedure varies from system to system, refer to your system documentation for the exact usage. 4 Skip this section if y

  • 2 - 3 TCP/IP PRINTING 3 Click on Next. 4 You must now select the correct Network printing port. Select a new port from the pull-down window and select Standard TCP/IP Port. 5 When you have done that click Next. 6 The Add Standard TCP/IP Port Wizard will now appear. Click the Next button. 7 Enter the IP address, or name of the printer you wish to configure. The Wizard

  • Brother NC6100H, ix Configuring the Brother Print Server (Remote Printer Mode) Using PCONSOLE and BRCONFIG...............................................................6-18 Other Sources of Information ...................................6-22 7 Printing From a Macintosh ® .................................................7-1 Printing from a Macintosh ® Using AppleTalk ® and TCP/IP or the Simple Network Configuration capabilities of Mac OS ® X. ..........................................................................................7-1 Overview..........................................................

  • Brother NC6100H, TROUBLESHOOTING 11 - 1 11 11 Troubleshooting Overview This chapter describes procedures for troubleshooting problems you may encounter with a Brother print server, it is divided into the following sections: 1 Installation Problems 2 Intermittent Problems 3 Protocol-Specific Troubleshooting Installation Problems If you cannot print over the network, check the following: 1 Make sure that the printer is powered on, is on-line and ready to print. Verify that the printer and the configuration are good by printing the printer settings page. Refer to the Quick Setup Guide. If the test fails, check: a If the LED is not blinking after connected to the ne

  • Brother NC6100H, 6 - 13 NOVELL NETWARE PRINTING 12 Change context if necessary and select the print queue you created. Click OK and then OK again, and then exit NWADMIN. 13 Start the appropriate BRAdmin application, and select the correct print server you wish to configure (by default, the node names will begin with BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). 14 Double click the appropriate print server. You will be prompted for a password, the default password is access. 15 Now select the NetWare tab. 16 Select Remote Printer as the Operating Mode, select the name of

  • Brother NC6100H, NOVELL NETWARE PRINTING 6 - 22 Other Sources of Information 1 Visit http://solutions.brother.com for more information on network printing. 2 Refer to chapter 10 of this User’s Guide to learn how to configure the IP address of the printer.

  • Brother NC6100H, 7 - 1 PRINTING FROM A MACINTOSH ® 7 7 Printing From a Macintosh ® Printing from a Macintosh ® Using AppleTalk ® and TCP/IP or the Simple Network Configuration capabilities of Mac OS ® X. Overview Brother print servers support the AppleTalk protocol running over Ethernet (also known as EtherTalk). This allows Macintosh ® users to print at the same time as all other Ethernet network using the AppleTalk (also referred to as EtherTalk) protocol. With the release of System 8.6 or later, Apple introduced a TCP/IP printing capability. This all

  • Brother NC6100H, 10 - 11 TCP/IP CONFIGURATION If you do not have any subnets, use one of the following default subnet masks: 255.255.255.0 for class C networks 255.255.0.0 for class B networks 255.0.0.0 for class A networks The leftmost group of digits in your IP address can identify the type of network you have. The value of this group ranges from 192 through 255 for Class C networks (e.g., 192.189.207.3), 128 through 191 for Class B networks (e.g.,128.10.1.30), and 1 through 127 for Class A networks (e.g., 13.27.7.1). If you have a gateway (router), enter its address w

  • 8 - 2 DLC PRINTING 3 Select DLC Protocol and then OK or Add if using Windows ® 2000. You may be asked for the location of the files. For Intel based computers, the necessary files are stored in the i386 directory of the Windows NT ® 4.0 CD-ROM. If you have a non- Intel platform, specify the correct directory on your Windows NT ® 4.0 CD-ROM and close the win

  • Brother NC6100H, DLC PRINTING 8 - 3 9 The selected print server address will then appear in the smaller box under Card Address. 10 Type in any desired name for the port (the name must not be the name of an existing port or DOS device, such as LPT1) and click OK then on the Printer Ports screen, click Next. 11 Select the correct driver click Next. 12 Give a name to the printer and specify if you wish to be able to print from DOS application. Then click Next. 13 Specify the share name (if you are going to share the printer). 14 Enter the Location and Comment information and click Next until you see the Completing the Add Printer Wizard screen. 15 Click Finish. Windows NT ® 4.0 Printer Setup Log into Wi

  • Brother NC6100H, TCP/IP CONFIGURATION 10 - 4 Using BRAdmin and the TCP/IP Protocol to Set the IP Address If your PC is using the TCP/IP protocol, do the following: 1 Select TCP/IP filter in the left frame of the main window. 2 Select the Device menu and choose the Search Active Devices. 3 Select the Device menu and choose Setup Unconfigured Device. 4 Select the MAC address of your print server and click the Configure button. You can find the node name and MAC address by printing out the printer settings page. Refer to the Quick Setup Guide for inf

  • Brother NC6100H, iv Intel Copyright and License Information This products includes object code from Intel’s UPnP SDK. The following is the copyright and licensing information for Intel UPnP SDK. Copyright© 2000 Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation an

  • Brother NC6100H, Multi-Protocol Print Server NC-6100h Network User's Guide Version 1 Please read this manual thoroughly before using the printer. You can print or view this manual from the CD-ROM at any time, please keep the CD-ROM in a convenient place for quick and easy reference at all times. The Brother Solutions Center (http://solutions.brother.com ) is your one stop resource for all your printer needs. Download the latest drivers and utilities for your printers or read the FAQs and troubleshooting tips. Some Brother printer models are network ready as standard. Other Brother printers can be upgraded with an optiona

  • Brother NC6100H, NOVELL NETWARE PRINTING 6 - 12 Creating the NetWare Print Server (NDS Remote Printer) Using Novell NWAdmin and BRAdmin Professional Utility To configure a Brother print server for remote printer mode with NWADMIN (NetWare Administrator utility) and BRAdmin, you will need to perform the following steps: 1 Make sure that the PSERVER NLM (NetWare Loadable Module) is loaded on your file server and that you are logged in as ADMIN in NDS mode on the NetWare 4.1x file server. 2 Start NWADMIN by double clicking on the icon. Select the desired Context that will contain the new printer. 3 Select Object from the menu bar and then Create. When you get

  • Brother NC6100H, CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 - 10 Adding a Second Brother Internet Port You should not re-run the install program to add a new Brother Internet Port. Instead, click the Start button, select Settings, and open the Printers window. Click on the icon of a printer that is using BIP, select File from the menu bar, and then choose Properties. Click on the Details (Ports on Windows NT ® 4.0, Windows ® 2000/ XP) tab and click the Add Port button. In the Add Port dialog, select the Other radio button (Windows ® 95/ 98/Me only) and then Brother Internet Port. Click OK (New Port on Windows NT ® 4.0, Windows ® 2000/XP) and it will give you the Port Name

  • Brother NC6100H, 9 - 1 WEB BASED MANAGEMENT 9 9 Web Based Management How to use a Web Browser to Manage Your Device Overview A standard Web Browser (we recommend Netscape Navigator version 4.0 or later/Microsoft Internet Explorer version 5.0 or later) can be used to manage your printer using the HTTP (Hyper Text Transfer Protocol). You can get the following information from a printer on your network using a web browser: 1 Printer status information. 2 Take control of the printer’s control panel. 3 Software version information of the printer and print server. 4 Change

  • v “EC” Declaration of Conformity Manufacturer Brother Industries Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Plant Shima Buji Xialilang Factory, Xialilang Village, Buji, Long Gang, Shenzhen, China 518112 Herewith declare that: Product description : Brother Network Card Product Name : NC-6100h are in conformity with provisions of the Directives applied: the E

  • Brother NC6100H, NOVELL NETWARE PRINTING 6 - 16 Important: Do not assign a password to the print server or it will not log in. 5 Return to the main Available Options menu by pressing ESCAPE. 6 Select Print Queues. 7 Press INSERT type in the desired print queue name (you will also be asked for a volume name. Press INSERT and select the appropriate volume), and press ESCAPE to return to the main menu. 8 Make sure that the new queue name is highlighted, and press ENTER. 9 Select print servers and press ENTER to specify which network print servers can print jobs from this print qu

  • Brother NC6100H, PEER TO PEER PRINTING 3 - 2 4 Windows ® 95/98/Me users can send print jobs using the IPP protocol via a Windows ® 2000 computer providing that the Microsoft Internet Print Services software is installed on the client PC, IIS is installed and running on the Windows ® 2000 and that the client PC is using version 4 or later of Microsoft Internet Explorer. 5 Brother printers are also compatible with HP JetDirect software, this means that you can use HP utilities to manage and to print to your Brother printer. Driver Deployment Wizard This installer includes the Windows ® PCL

  • Brother NC6100H, 2 - 9 TCP/IP PRINTING Open the LAN Services folder and execute the LAN Requester program: 1 Select Definitions. 2 Select Aliases. 3 Select Printers. 4 Select Create. Enter the following: 5 Exit the LAN Requester program. 6 You should now be able to print. To test the queue, type the following from either the OS/2 command prompt or from a DOS workstation: 7 COPY C:\CONFIG.SYS \\servername\alias 8 Where servername is the name of the file server and alias is the alias name that you specified dur

  • Brother NC6100H, NOVELL NETWARE PRINTING 6 - 2 General Information In order to use a Brother print server on a NetWare network, one or more file servers must be configured with a print queue that the print server can service. Users send their print requests to the file server's print queue, and the jobs are then spooled (either directly, or in the case of remote printer mode, via an intermediate NetWare print server) to the appropriate Brother print server. The system administrator can create Bindery (NetWare 3), NDS (NetWare 3 and NetWare 4) based queues in a single environment without having to switch between applications by u

  • Brother NC6100H, 6 - 3 NOVELL NETWARE PRINTING Creating a NDPS Printer Using NWADMIN for NetWare5 With NetWare 5, Novell has released a new preferred printing system called Novell Distributed Print Services (NDPS). Before the print server can be configured, NDPS must be installed on the NetWare 5 server and an NDPS Manager configured on the server. NDPS Manager This creates a NDPS manager that interacts with services running at the server and manages an unlimited number of printer agents. You have to create an NDPS manager within an NDS tree

Related Products and Documents (Network Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Cadillac 2014 Cadillac ATS Owner's manual cadillac/2014-cadillac-ats-KD6.pdf 30 Mar 2023 446 9.27 Mb
2 Compaq 226593-B21 - Smart Array 5i RAID Controller Operation & user’s manual compaq/226593-b21-smart-array-5i-raid-controller-935.pdf 03 Jan 2023 141 1.78 Mb
3 GE GSH22JFR Dimensions and installation information ge/gsh22jfr-2WB.pdf 01 Feb 2024 2 0.12 Mb
4 MiLAN MIL-S800I Operation & user’s manual milan/mil-s800i-68N.pdf 28 Apr 2023 4
5 Indesit CIO 632 CC Operating instructions manual indesit/cio-632-cc-2H7.pdf 13 Feb 2023 12
6 JVC KS-FX832R Gebruiksaanwijzing jvc/ks-fx832r-AVE.pdf 21 Jul 2022 36

Similar Resources:

  • 3Com

    3C985B-SX

    (40 pages)
    Gigabit EtherLink™ Server Network Interface Cards (NICs) forNovell Netware Gigabit EtherLink Server NIC (3C985B-SX)1000BASE-SX PCI Fiber NIC (710011, 710012)10/100/1000BASE-T PCI NIC (3C986-T, 710024, 710025)1000BASE-LX PCI Fiber NIC (710026) Installation andUser Guide http://www.3com.com/http://www.3com.com/productreg Published May 2001User Guide version …
  • Xerox

    WNA-100 - Bridge

    (1 pages)
    Xerox Wireless Network AdapterSet your business free with wireless printingThe high-performance Xerox WNA-100 wireless network adapter connects your Phaser® printers and multifunction devices to your network. Compact and secure, it allows you to place a printer wherever you need it.Easy to install, manage and use• Works with any Ethernet-enabled Ph …
  • Cisco

    ASR 9000 Series

    (50 pages)
    499Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration GuideOL-26061-03Configuring Serial Interfaces on the Cisco ASR 9000 Series RouterThis module describes the configuration of serial interfaces on the Cisco ASR 9000 Series Router.Before you configure a serial interface, you must configure the clear channel T3/E3 con …
  • Renesas

    MCU Board M30850T2-EPBM

    (3 pages)
    (1/3) M30850T2-EPBMMCU Board for Replacing M30850T2-EPB, M30850T3-CPE and M30850T2-CPEUser’s Manual CAUTION If the requirements shown in the "CAUTION" sentences are ignored, the equipment may cause personal injury or damage to the products. Renesas Tools Homepage http://www.renesas.com/toolsRev.2.00 Apr. 25, 2007 REJ10J1492-0200 …
  • Transcend

    USB 2.0 Compact Card Reader TS-RDS1

    (4 pages)
    TTTSSS---RRRDDDSSS111 USB 2.0 Compact Card Reader Transcend information Inc 1 Description Placement TS-RDS1 is a USB 2.0 Compact Card Reader. It is a small device specifically designed for fast, easy data transfer and exchange using multiple types of Memory Cards. The Card Reader accepts the direct insertion of; Secure Digital (SD …
  • Sun Microsystems

    Sun Fire X4150 Server

    (107 pages)
    Sun Microsystems, Inc.www.sun.comSubmit comments about this document at: http://www.sun.com/hwdocs/feedbackSun Fire™X4150, X4250 and X4450Servers Windows Operating SystemInstallation GuidePart No. 820-7141-11January 2009, Revision A …

Comments, Questions and Opinions: