Manualios.com

AEI Security & Communications SolarGuard SG1100ARM2 Operation & User’s Manual

  • SolarGuard SG1100ARM2 Security System
  • maVToviCPAGxc
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 8

AEI Security & Communications SolarGuard SG1100ARM2 Manual Online:

3.85, 2521 votes
AEI Security & Communications SolarGuard SG1100ARM2 User Manual
AEI Security & Communications SolarGuard SG1100ARM2 User Guide
AEI Security & Communications SolarGuard SG1100ARM2 Online Manual

Text of AEI Security & Communications SolarGuard SG1100ARM2 User Guide:

  • AEI Security & Communications SolarGuard SG1100ARM2, AEI SECURITY & COMMUNICATIONS LTD Weslake Industrial Park Rye Harbour Road Rye East Sussex TN31 7TE United Kingdom Head Office: +44 (0) 1797 226122 Fax: +44 (0) 1797 227122 Email: [email protected] Helpline (UK): 0845 1667940 Email: [email protected] SolarGuard™ SG1100ARM2 100% Wire free Alarm System USER GUIDE TO INSTALL THIS ALARM PLEASE FOLLOW THE STEP BY STEP GUIDE IN PAGE ORDER.

  • AEI Security & Communications SolarGuard SG1100ARM2, Page 2 Installation Guide Table of Contents PAGE CONTENTS 3 Introducing the SolarGuard™ SG1100ARM2 4 STEP 1: Unpacking your SolarGuard™ 5 STEP 2: Choosing your site code 6 STEP 3: Setting the zone codes 7 STEP 4: Installing the bell box 8 STEP 5: Learning the site code 9 STEP 6: Installing the PIR sensor 10 STEP 7: Resetting the PIR sensor 11 STEP 8: Installing the door contacts 12 Day to day operation 13 Expanding your system 14 HELP! Frequently asked questions 15 Notes IMPORTANT NOTICE. PLEASE FOLLOW YOUR POWER TOOLS SAFETY GUIDELINES. ALWAYS USE AN

  • Page 14 HELP! Frequently asked questions Q: Can I give additional remote controls to family members/friends etc.? A: Yes - use part number RM01 (see opposite) Q: In disarm (UNSET) mode, the alarm sounds when I walk in front of a sensor! A: You must check the zone settings for the sensor that is activating the alarm. It should be set to zone 1,2 or 3 for standard operation

  • Page 4 STEP 1 Unpacking your SolarGuard™ Before proceeding to step 2 of the installation, unpack the contents of your SolarGuard alarm system on to a flat surface - such as a table or workbench. Although we weight check every box on the production line, please check the you have all the items listed below. You will also require the following tools: • Power Drill • 5mm Masonry Bit • Posid

  • AEI Security & Communications SolarGuard SG1100ARM2, Page 12 Day to day operation Changing the current mode of the SolarGuard. Pressing the MODE button on your hand held remote control causes the SolarGuard to cycle through it’s different mode settings. The SolarGuard gives a number of beeps to indicate the current mode: 1 BEEP = ARMED (SET) 3 BEEPS = DISARMED (UNSET) 5 BEEPS = DISARMED (Low battery detected in a PIR or door contact) 21 BEEPS = DISARMED (Alarm has been triggered since it was last armed) 6 CHIRPS = BATTERY TEST MODE (see below) Testing the system batteries You should check your alarm system

  • AEI Security & Communications SolarGuard SG1100ARM2, Page 6 STEP 3 Setting the Zone Codes What is a Zone Code? The Zone code sets the desired behavior of a sensor. Every PIR and magnetic door contact has a zone setting. How do I set the Zone Code? The code is set by modifying switches 10,11 and 12. Please refer to the table opposite when setting the zone setting. ZONE 10 11 12 Usage Zone 1 ON OFF OFF Entry/Exit A sensor set to Zone 1 will give you a 20 Second entry/exit delay in this area. Normally used for magnetic door contacts) Zone 2 OFF ON OFF Instant Walk throug

  • AEI Security & Communications SolarGuard SG1100ARM2, Page 10 STEP 7 Resetting the PIR sensor Keeping your PIR in TEST mode will dramatically reduce the battery life. Therefor we recommend you switch your PIR to NORMAL mode when you have finished your installation and testing the system. This will ensure that the batteries last between 18 months and a 5 years depending on usage. Help! When I switch to NORMAL mode, the PIR stops working. A PIR that works in TEST mode, will always work when switched to NORMAL mode. However, please be aware of the following points: 1) The red indicator light will not function in NORMAL mode. This is correct, and is designed to increase the battery life. 2) The PIR will

  • AEI Security & Communications SolarGuard SG1100ARM2, Page 8 STEP 5 Learning the site code Your SolarGuard bell box needs to learn which site code to respond to i.e. in order to respond to your remote control and your sensors, it needs to learn your site code. This is achieved by following the code learning procedure. STEP 1 Check that your SolarGuard console is set to MODE A and FUNCTION 1. These switches are shown opposite. Press the START button once. STEP 2 Press the button labeled “LEARN”, then immediately after, press the MODE button on your hand held remote control. If you hear two beeps then this step has been successful - proceed to Step 3. If you don’t get any response from the SolarGuard, please repea

Related Products and Documents (Security System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 ViewSonic ViewPad 7x Operation & user’s manual viewsonic/viewpad-7x-QJV.pdf 10 Aug 2023 83 16.77 Mb
2 EINHELL BT-ID 650 E Operating instructions manual einhell/bt-id-650-e-I24.pdf 05 Jan 2024 12
3 MultiChoice 050645 Owner's manual multichoice/050645-B5F.pdf 05 Aug 2022 32
4 Olympus CAMEDIA D-555 Zoom Advanced manual olympus/camedia-d-555-zoom-F5O.pdf 01 Oct 2023 124
5 Mitel 5560 IPT none Operation & user’s manual mitel/5560-ipt-none-765.pdf 11 Jan 2024 51
6 JLG 660SJ Service and maintenance manual jlg/660sj-63A.pdf 22 Dec 2022 332

Similar Resources:

  • Yale

    HSA6020

    (2 pages)
    Pack contents• 1 x HSA6020 PIR motion detector• 2 x wall plugs• 1 x 2.6 mm (diameter) x 10 mm crosshead fixing screws.• 2 x 3.5 mm x 15 mm wall plugsPIR detector descriptionStatus LED: Hidden red LED shinesthrough lens to indicate door contactstateLearn/Test button: Used for testing theradio performance (No sleep time) andfor learning-in.Cover screw: …
  • Federal Signal Corporation

    Global G-STR Series

    (80 pages)
    25500185 enRev. A0 1015Printed in U.S.A.Installation and Maintenance InstructionsGlobal Series Model G-STR Strobe BeaconFor Use in Hazardous LocationsPara ver este manual em Português, acesse www.federalsignal-indust.com.要查看本手册的简体中文版,请访问 www.federalsignal-indust.com。 Для просмотра руководства на � …
  • Siemens

    SINAMICS S120

    (28 pages)
    SINAMICS SINAMICS S120 Power-units / Chassis Liquid-cooled Instruction for installation in cabinets for marine drive applications Version Issue 3.0 December 2016 © Siemens AG 2016 …
  • Setec

    SKM-03.2

    (23 pages)
    SeTec-SKM03.2-Kunde 02TB21-F Page 1 of 23 Line-Type Sensor Cable Alarm SKM-03.2 DIN EN54-22:2015+A1:2020 Technical Description Item no. BK83000 VdS G221005 Securitas Electronic Security Deutschland GmbH SeTec Sicherheitstechnik Hauptstr. 40a 82229 Seefeld Issue date: 25.02.2021 …
  • Whelen Engineering Company

    1010

    (3 pages)
    Page 1©1998 Whelen Engineering Company Inc.Form No.13371D (092501)For warranty information regarding this product, visit www.whelen.com/warranty• Proper installation of this product requires the installer to have a good understanding of automotive electronics, systems and procedures.• Whelen Engineering requires the use of waterproof butt splices and/o …
  • FW Murphy

    Selectronic S1501 series

    (34 pages)
    00-02-0271 2018-10-23 Section 50 Series S1501 Selectronic® Micro-Controller/Annunciator Model Year 2011 and Earlier Installation and Operations Manual …

Comments, Questions and Opinions: