Manualios.com

CELOT CTR-180 Operation & User’s Manual

CELOT CTR-180 Manual Online:

3.55, 1003 votes
CELOT CTR-180 User Manual
CELOT CTR-180 User Guide
CELOT CTR-180 Online Manual

Text of CELOT CTR-180 User Guide:

  • CELOT CTR-180, 19 CTR-180 M2M Router Manual CELOT WIRELESS 3. 4 Firewall 3.4.1 Firewall > MAC/IP/Port Filtering Settings 1). Basic Settings: ● MAC/IP Port Filtering : If Enabled, Filtering will be available. ● Default Policy : ● Dropped : Only allowed MAC/IP Port (listed) in the “MAC/IP/Port Filtering Settings” window can access to the router. ● Accepted : Only listed MAC/IP Port in the “MAC/IP/Port Filtering Settings window restricted to access to the router. 2). MA

  • CELOT CTR-180, 33 CTR-180 M2M Router Manual CELOT WIRELESS ● Standards : IEEE 802.11g ,IEEE 802.11b, ,IEEE 802.11b ● Security : 64/128-bit WEP, WPA-PSK, WPA-PSK2 ● WLAN Frequency Range : 2.4GHz to 2.483GHz ● Memory : RAM 64MB, Flash Memory 8MB (4MB is reserved for customer S/W) ● CDMA Standard : IS-95 A/B, IS-98A, IS-637A, IS-707A, IS-2000, IS-835, IS-856, IS-866, IS-890 ● CDMA Frequency Range : A Band : RX : 462.5 ~ 467.475 MHz / TX : 452.5 ~ 457.475 MHz L Band : RX420.000 ~ 424.975 MHz /TX :410.000 ~ 414.975 MHz ● CDMA REV.A Data Ra

  • CELOT CTR-180, 22 CTR-180 M2M Router Manual CELOT WIRELESS 3.4.5 Firewall > Contents Filtering ● Contents Filter Settings You can set certain contents of WEB to be restricted. ● Webs URK Filter Settings You can set certain Web sites to be restricted to access. Input URL address and click [ADD] then it will be shown in the “Current Webs URL Filter” and also the listed URLs are restricted. ● Wes Host Filter Setting You can restrict WEB URL containing certain words. Input URL keyword (ex: google, MSN) and click

  • CELOT CTR-180, 16 CTR-180 M2M Router Manual CELOT WIRELESS 2). And chose one of types from TKIP, AES and TKIPAES for WPA Cipher Type. 3). Input passwords which you want to set in Pass Phrase, if required. 3.3.4 Wireless > AP Client CTR-110 can be used as an AP client. 1) You need to check the followings for the AP which you want to connect to - SSID - Security Mode - Encryption Type - Password 2) For AP client setting, , go to Wireless > Basic - Select the same channel with the channel for AP. - Click [Apply] 3) Go to Wireless > AP Client

  • CELOT CTR-180, 6 CTR-180 M2M Router Manual CELOT WIRELESS ※ External Interface 2.2 LED Display No. Assi g nmen t Colo r Status Remarks LED1 3G RSSI Various ON Yellow Green -> Orange -> Red ( from Stron g to week si g nal ) LED2 3G RED ON When the device is connected to 3G network. LED3 WLAN RED ON When WLAN is activated. LED4 POWER RED ON When the device is power on. 2.3 Getting Started. 1). Open Rear Cover and Insert SIM Ca

  • CELOT CTR-180, 13 CTR-180 M2M Router Manual CELOT WIRELESS This page is to configure the parameters for wireless LAN clients which may connect to your Access Point. You can change wireless encryption settings as well as wireless network parameters. 1). WIFI OFF : WIFI shall be OFF by clicking it. 2). Network Mode : You can select Wireless Standard of CTR-180 x 11b/g/n mixed mode- 2.4GHZ(B+G+N) Using 802.11b/g/n.(Recommended) x 11b/g mixed mode- 2.4GHZ(B+G) Using 802.11b/g. x 11b only -2.4GHZ(B) Using 802.11b x 11g only-2.4GHZ(G) Using 802.11g x 11n only(2.4G) -2.4GHZ(N) Using

  • CELOT CTR-180, 27 CTR-180 M2M Router Manual CELOT WIRELESS This page is to save current settings on a file or reload the settings from any file which was saved previously. Besides, you could reset the current configuration to factory default. 1). Export Settings To save the current setting Click [Export] button and below picture will be displayed. Then click [Save] button and save[Config.dat file] in the desired path. 2). Import Sett

  • CELOT CTR-180, 10 CTR-180 M2M Router Manual CELOT WIRELESS This page is to configure the parameters for local area network which connects to the LAN port of your Access Point. Here you may change the setting for IP address, subnet mask, DHCP, etc.. ● IP Address: The basic IP address for CTR-100 is “10.10.10.254”. IP address for CTR-180 can be changeable on this menu. ● Subnet Mask : You can change Subnet Mask ● Default Gateway : You can change Defau

  • CELOT CTR-180, 24 CTR-180 M2M Router Manual CELOT WIRELESS 3.5.2 Administration>Statics You can check all of Statistics information for CTR-180 including Memory, WAN/LAN and Clients DATA

  • CELOT CTR-180, 30 CTR-180 M2M Router Manual CELOT WIRELESS 3.6.1 Service> Direct Serial CTR-180 supports “Direct Serial” via Full UART and Lite UART to transfer Serial raw DATA from a device to a server. The Serial device can work as if it is connected to the server directly. ● Status Setup : Select “Enable” ● Device Setup : Select Serial port, Baudrate, DATA bit, Party, Stop bit and Flow Control etc ● Server Setup : Input server IP and its Port.

  • CELOT CTR-180, 14 CTR-180 M2M Router Manual CELOT WIRELESS 3). Network name SSID: You can change Network SSID, up to 30 characters can be input based on ASC II type. Also you can select Hidden or Isolated not to show the SSID to other clients. 4). Channel Number : You can select channel numbers for wireless network. The channel number is to be set up as factory default. If you select Auto, it will search for proper channel. ※ Note Wireless Basic Settings, most of the values except SSID are preset to provide users with the optimized performance from the factory. So please do not change any settings, unles

  • CELOT CTR-180, 8 CTR-180 M2M Router Manual CELOT WIRELESS 3. 1 OverView Basic network information can be displayed. ● Select Language: Supported languages can be selected. 3. 2 Internet 3.2.1 Internet > WAN

  • CELOT CTR-180, 2 CTR-180 M2M Router Manual CELOT WIRELESS Contents 1. Introduction 1.1 Feature 1.2 Package Contents 2. Name of each section and features description 2.1 Name of each section 2.2 LED Display 2.3 Getting Started. 3. Using Configuration Menu Connecting CTR-180 to PC 3. 1 OverView 3. 2 Internet 3.2.1 Internet > WAN 3.2.2 Internet > LAN 3.2.3 Internet > DHCP Clients 3.2.4 Internet > Advanced Routing. 3.3 Wireless Setting 3.3.1 Wireless > Basic 3.3.2 Wireless > Advanced 3.3.3 Wireless > Security 3.3.4 Wireless > AP Client 3.3.5 Wireless > WPS 3.3.6 Wire

  • 28 CTR-180 M2M Router Manual CELOT WIRELESS In order to return Factory Default Settings window, click [Load Default] button, then the new message window will be displayed. Then, click [OK] button and CTR-180 will be changed to the factory setting . 3.5.6 Administration> Reboot Settings You can manage CTR-180 system reset in

  • 4 CTR-180 M2M Router Manual CELOT WIRELESS 1.2 Package Contents CTR-180 5V DC Power Adaptor CDMA Antenna Battery Pack (optional) GPS Module (optional) ※ Note Pictures in User Manual might be different from the actual product you purchased. Furthermore, some of the components might be changed for better perform

  • CELOT CTR-180, 26 CTR-180 M2M Router Manual CELOT WIRELESS ● NTP Setting ● Sync with NTP server to set Current time ● Select Time Zone ● Input NTP Server ● Input time for NTP Sync time (hours) ● DDNS Setting - CTR-180 will update the DNS server with its IP addresses when a network supports Dynamic DNS (DDNS). 3.5.4 Administration>Upload Firmware This page is to upgrade Firmware and boot loader ● To Upgrade the SW of CTR-180, click [Browsing] Icon, choose the right BIN file and click [APPLY] Ic

  • CELOT CTR-180, 9 CTR-180 M2M Router Manual CELOT WIRELESS WAN connection mode for CTR-180 is “3G/LTE” as default but other types of WANs can be selected as follow, 1) STATIC (Fixed) 2) DHCP (Auto Config) 3) PPPoE(ASDL) 4) L2TP 5) 3G/LTE Mode ● Provided User ID, Password, Dial Number and APN should be input. 6) CDMA ※ Note You must input correct user ID, Password, and Dial Number from the wireless network provider (ex. Skylink etc) otherwise, the device is not able to access the wireless network. (ex.) User Name: Mobile Password: internet Dial Up Number: #777 ● Operation Mode [Keep Alive / On Demand] You can select t

  • CELOT CTR-180, 21 CTR-180 M2M Router Manual CELOT WIRELESS It will allow the PC to be open for every internet user. PC with DMZ enabled can communicate all of internet users and servers. ● Select Enable DMZ Setting to use DMZ. ● DMZ IP Address: Input client IP address. 3.4.4 Firewall > System Security You may configure the system firewall to protect AP/Router itself from attacking With the following options ● Remote Management ● Ping from WAN Filter ● Block Port Scan ● Block SYN Flood ● Stateful Packet Inspection

  • CELOT CTR-180, 11 CTR-180 M2M Router Manual CELOT WIRELESS - You need to Input IP address and MAC address for the client PC and then click Apply Changes. - Up to 3 Static IP can be available. 3.2.3 Internet > DHCP Clients DHCP Clients connected to CTR-180 can be monitored on this page. 3.2.4 Internet > Advanced Routing.

  • 34 CTR-180 M2M Router Manual CELOT WIRELESS CELOT Wireless CO., Ltd 4Fl.,NongHyup Bldg.,#1588-10 Gwanyang-Dong, Dongan-Gu, Anyang City, Gyeonggi-Do, Korea (Postal Code : 431-727) Tel : +82 70 7458 5501 Fax: +82 31-388 5501 http://www.celotw.co.kr/

  • 7 CTR-180 M2M Router Manual CELOT WIRELESS 3. Using Configuration Menu Connecting CTR-180 to PC 1). Connect CTR-180 to PC through LAN cable or WIFI 2). For WIFI connection, the default Network ID (SSID) from the factory is CTR-180 3). To access to Web UI page, Input http://10.10.10.254 in the address window as shown below and press Enter Key

  • CELOT CTR-180, 3 CTR-180 M2M Router Manual CELOT WIRELESS 1. Introduction This manual is for users who use CTR-100 as 3G Wi-Fi Router. For the pursoe of 3G M2M appliction, please contact to Celot Wireless. 1.1 Feature CTR-180 provides functions as follows; ● CTR-180 enables you to access to the internet by using wireless network (CDMA REV.A network). ● CTR-180 supports multi-interfaces including USB, Full UART (RS232C/RS485), Lite-UART, I2C and RJ. ● CTR-180 supports direct serial works as if a serial device is directly c

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Audiovox AS 9076N Owner's manual audiovox/as-9076n-IYQ.pdf 10 Feb 2024 4 0.03 Mb
2 HM Electronics DX300 Operating instructions manual hm-electronics/dx300-83N.pdf 07 Apr 2023 31
3 Festool RO 125 FEQ Instruction manual festool/ro-125-feq-43X.pdf 23 Jun 2023 40
4 Air King FRAS50 Specifications air-king/fras50-C3B.pdf 27 Jan 2023 1 0.07 Mb
5 Philips AZ7383 Cd Operation & user’s manual philips/az7383-cd-OZ3.pdf 01 Jul 2022 18
6 Schwinn A15 Upright Bike Owner's manual schwinn/a15-upright-bike-YCY.pdf 02 May 2023 28 7.7 Mb

Similar Resources:

  • Cisco

    12000 - Series Chassis Modular Expansion Base

    (60 pages)
    CHAPTER 3-1Cisco 12000/10700 v3.1.1 Router Manager User GuideOL-4455-013Getting StartedThis chapter describes the typical tasks you should complete to start using the Cisco 12000/10720 Router Manager application. See Figure 3-1 on page 3-2 for further details.This chapter provides the following information:• Cisco 12000/10720 Router Manager Workflow• St …
  • Siemens

    SCALANCE M800

    (54 pages)
    ___________________ ___________________ ___________________ SIMATIC NET Industrial Remote Communication Remote Networks SCALANCE M-800 Getting Started 01/2019 C79000-G8976-C337-07 Preface Connecting SCALANCE M-800 to WAN 1 SCALANCE M-800 as DHCP server 2 …
  • Encore Networks

    EN-2000

    (4 pages)
    For information on trademarks, safety, limitations of liability, and similar topics, see http://www.encorenetworks.com/disclaimer.htm. Configuring Traffic Priority for the EN-2000he EN-2000 provides wireless and cabled connections to a local area network (LAN), to a wide area network (WAN), and to peripheral devices and remote devices. This document discusse …
  • Cisco

    ASR 5500

    (173 pages)
    ASR 5500 Installation Guide Last updated December 19, 2014 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 …
  • Billion

    BiPAC 7402VGO

    (2 pages)
    VoIP/802.11g ADSL2+ VPN Firewall RouterBiPAC 7402VGO • Two FXS ports for connecting to regular telephones• One RJ-11 FXO port for PSTN Lifeline support• Secured Virtual Private Network (VPN) with powerful 3DES• 802.11g Wireless AP with WPA Support • High speed Internet Access with ADSL, ADSL2/2+ firm …
  • H3C

    S3610 Series

    (60 pages)
    Operation Manual – Login H3C S3610&S5510 Series Ethernet Switches Table of Contents i Table of Contents Chapter 1 Logging into an Ethernet Switch ............................................................................... 1-1 1.1 Logging into an Ethernet Switch........................................................................................ …

Comments, Questions and Opinions: