ACTi TCM-5001 Hardware User Manual

Text of ACTi TCM-5001 User Guide:

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 2 Table of Contents 0. Precautions 3 1. Introduction 4 Package Contents ........................................................................... 4 Features and Benefits ..................................................................... 5 Safety Instructions .......................................................................... 7 Physical description ........................................................................ 9

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 3 0. Precautions Read these instructions You should read all the safety and operating instructions before using this product. Heed all warnings You must adhere to all the warnings on the product and in the instruction manual. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment. Servicing Do not attempt to service this video device yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Trademarks A

• www.acti.com TCM-5001 Hardware User’s Manual 4 1. Introduction Package Contents TCM-5001 Camera Product CD Terminal Blocks for Power & DI/O Warranty Card Accessory *For the mounting block, please attach it flat side to the

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 5 Features and Benefits This is a cutting-edge digital video surveillance camera. It can compress and transmit real time images with outstanding image quality (30 FPS @ VGA 640x680) through a standard TCP/IP network. This camera is your best choice to build an intelligent IP surveillance system. H.264/MPEG-4/MJPEG Triple Codec Dual Streaming This device supports 3 compression formats, H.264, MPEG-4 and MJPEG. It brin

• www.acti.com TCM-5001 Hardware User’s Manual 6 software developers. Software developers can save considerable efforts by using our Streaming Library or ActiveX control. Please contact us for details on integration support. Digital Time Code Embedded The “Digital Time Code Embedded” function records video time in the video str

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 7 Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments / personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided in the situations above. Don’t open the housing of the product Cleaning Disconnect this video product from the power supply before cleaning. Attachments Do not use attachments not recommended by the video product manufacturer as they may cause hazards. Water and Moisture Do

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 8 this manual. Adjust only those controls that are covered by the instruction manual, as an improper adjustment of other controls may result in damage, and will often require extensive work by a qualified technician to restore the video product to its normal operation. Safety Check Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine if the video product is

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 9 Physical description 1) Ethernet Port The IP device connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this IP device can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet). 2) Reset Button Step 1: Switch off IP device by disconnecting the power cable Step 2: Press and continue to hold the Reset Button (with a sharp tipped object, like a pen.) Step 3: Reconnect the power cable while continuing to hold the reset button. The Power

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 10 LED light will flash on for 3 second first, turn off for about 15 seconds, flash on for another second and turn off again. By this time the reset to default operation is already completed. This will take around 20 seconds from power up. You may then release the reset button. This length of time fluctuates slightly with the environment. The Power LED light will come back on and stay on after a few more seconds. The unit will start

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 11 100mA. Pin 3 Digital Input Connect to GND to activate, or leave floating (or unconnected) to deactivate. Must not be exposed to voltages greater than 30V DC. Pin 4 Transistor Output Uses an open-collector NPN transistor with the emitter connected to the GND pin. If used with an external relay, a diode must be connected in parallel with the load for protection against transient voltages. Max load = <100mA Max voltage = 24V DC (to the transistor) The I/O terminal p

• www.acti.com TCM-5001 Hardware User’s Manual 12 5) Power Input Connect the power adaptor here if your power input is DC12V. 6) DC Iris DC Iris Lens Control Port PIN NAME DESCRIPTION 1 12V DC Power Input 2 GND Ground Pin

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 13 Basic Connections Follow the procedures below to connect the IP device to the respective apparatuses. If you have a PoE(Power over Ethernet) supported switch or injector: 1) Connect your H.264 IP PoE Box Camera to the Switch / Injector by CAT5 or CAT6 cables with RJ45 connector. 2) Connect your Switch / Injector to PC with another CAT5 / CAT6 network cable. If your switch does not support PoE, and you are powering the camera with power adaptor: 1) Connect the power adaptor to H.264 IP PoE Box Camera 2) Connect IP device’s Ethe

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 14 Product Specification TCM-5001 Device Micron Progressive Scan CMOS Size 1/3 inch Effective Pixels 640 (H) x 480(V) Color 0.5 Lux at F1.0 (2400 °K, 30 IRE) B/W N/A IR Sensitivity N/A CDS Sensor N/A Lens Mount C/CS (with adaptor) Focal Length f4.2mm/ F1.8 Viewing Angle 64.4° (Horizontal) Synchronization Sync. System Internal Day/Night functions Mechanical IR Cut Filter N/A Motion Detection Yes (3 Windows) Electronic shutter 1/5 ~ 1/15,000 sec Fixed Shut

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 15 2. Accessing Camera If you have DHCP server / router in your network: Many network server / routers are able to automatically provide IP addresses through DHCP. If you are using such a network, just plug in your computer and IP Box Cam into the network and your IP device will acquire network address by itself. Find and access the device with our IP Utility program. You may download it at: http://w ww.acti.com/product/detail/Software/ACTi_Utility_Suite If you do NOT have DHCP server / router in your network: 1. Configure your PC to

• www.acti.com TCM-5001 Hardware User’s Manual 16 4. Open Internet Explorer (Version 6.0 or above) , and type in the Default IP: 192.168.0.100 5. When you see the login window, please input default user and password: Default User: Admin Password: 123456 6. After logging in, you will see the video from camera. To go to the main menu,

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 17 If you are using a single camera, this is enough to access the device. If you are using multiple devices, you need to change the current device to another unused IP address, so that when the next device is connected to the network, no two devices use the same IP. Please perform the following steps. 7. Go to Network -> Connection Type 8. Change the IP mode to Static. 9. Change the IP to 192.168.0.101 or any other unused IPs. Do NOT use the PC’s IP address or 19

• ACTi TCM-5001, www.acti.com TCM-5001 Hardware User’s Manual 18 10. Click “Apply” 11. Please go to Maintain -> Save & Reboot, and click ”Apply”. Internet Explorer will close after a few seconds. This is normal. 12. Wait for 30 seconds, and open IE again to connect to the new IP. (In this example, 192.168.0.101). For the second device or more you add into the network, please type the correct IP. 13. Adjust the default Video setting by going to Video & Audio -> Media 1

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• Mitel 6800 Series (2 pages) Mitel WLAN AdapterThank you for purchasing the Mitel Wireless LAN (WLAN) Adapter .The Mitel WLAN Adapter is a wireless bridge that can be used to add wireless connectivity features to the Mitel IP phones (e.g. Mitel MiVoice 6900 Series IP phones or the Mitel 6800 Series SIP phones). With 2.4GHz/5GHz band support, the Mitel IP phones can easily be connected …

• Bosch NWD-455 FlexiDome (6 pages) Video | NWD‑455 FlexiDome IP CamerasNWD‑455 FlexiDome IP Cameras www.boschsecurity.com u High-impact, vandal-resistant enclosureu Advanced color CCD network dome camerau NightSense for low light situationsu High-performance H.264, MPEG-4, and M-JPEGu Direct-to-iSCSI recordingThe NWD-455 FlexiDome IP is a high-performance, 1/3-inch CCD networ …

• VADDIO ConferenceSHOT 10 (13 pages) A Quick Look at the Cameran Camera and zoom lens: The ConferenceSHOT 10 camera features a 10X optical zoom lens (11X inSuper-Wide mode).n IR sensors: Sensors in the front of the camera base receive signals from the remote. Make sure there'snothing directly in front of the camera base, and point the remote at the camera.n Status light: The multi-colored …

• Northern HDDWMIR (2 pages) CAMERA DIMENSIONS / LINE ART HDDWMIR / HDDWMIRW 4-in-1, Full HD 1080p Outdoor IR Eyeball Camera3.6mm, 60’ IR RangePRODUCT FEATURES•1/3” Sony CMOS Sensor•Multi Format (TVI, CVI, AHD, 960H) •3.6mm Fixed Focal Lens•Mechanical IR Cut Filter•Cable & UTC OSD Control•Digital Wide Dynamic Range - 3D DNR•60’ IR Range / …

• DivioTec NDR153 (2 pages) IP CAMERAQuick Installation GuideNDR153Series V1.0PRECAUTIONS1. OPEN-CASE INSPECTION2. PRODUCT STRUCTURE3. EQUIPMENT INSTALLATION l Do not use the camera in extreme temperature conditions.Please use the camera within -20oC to 50oCAir vent is required at high temperaturel Do not use or store the camera in humid environmentIt may cause poor image quality.l Do …

• VHD VX710N (22 pages) NDI 4K Video Conference Camera User Manual NDI 4K Video Conference Camera User Manual English (V1.0) Copyright Notice All contents of this manual, whose copyright belongs to our Corporation cannot be cloned, copied or translated without the permission of the company. Product specifications and information which …

Comments, Questions and Opinions: