Manualios.com

Agri Alert WM3000 Installation Instructions Manual

Agri Alert WM3000 Manual Online:

4.65, 2989 votes
Agri Alert WM3000 User Manual
Agri Alert WM3000 User Guide
Agri Alert WM3000 Online Manual

Text of Agri Alert WM3000 User Guide:

  • Agri Alert WM3000, 2 AA-WM3000 rev.02 AA-WM3000 WARNINGS The warranty can be void if this product is used in a manner not specified by the manufacturer. Every effort has been made to ensure that this manual is complete, accurate and up-to-date. The information contained in it is however subject to change without notice due to further developments. This device complies with Part 15 of the FCC rules, operation of this device is subject to the following conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation. Table of Contents Installation ..................

  • Agri Alert WM3000, 3 AA-WM3000 AA-WM3000 rev.02 The AA-WM3000 wireless modules are designed for use with the AA 800T, the AA 2400, and the AA 9600 Agri Alerts. Installation Mounting Instructions & Connections 0. Mount the Agri Alert and the power pack in the desired location. 1. Locate the AA-WM3000Rx close by in a suitable location so there are the least amount of obstructions to the transmission signal between the Rx and the Tx. 2. Check that the on/off switch (Fig.1, #2) of the receiver is in the “off” position. 3. Connect the 12vdc power cord supplied with

  • 4 AA-WM3000 rev.02 AA-WM3000 Setting the Dip Switches 1. Set the 8 dip switches (Fig.1, #1) on the receiver to the desired positions. Each receiver must be set to a different switch combination. (There are 256 possible combinations to choose from.) 2. Set the first 8 dip switches on the transmitter (Fig.2 #5) to the same positions as the settings on the receiver t

  • Agri Alert WM3000, 5 AA-WM3000 AA-WM3000 rev.02 Testing 1. Be sure that the Agri Alert is powered up and that the appropriate zones are activated. 2. Turn on the receiver by pushing the on/off switch (Fig.1, #2) to the “on” position. The red LED light should now be on. (Fig.1, #11) 3. At the transmitter, set the Recognition Time jumper (Fig.2, #7) to 0 second. Close up then enclosure then press the test push button (Fig.2, #13) on the outside of the box. When the push button has been activated, the transmission LED (Fig.2, #12) lights up for 4 seconds and the Low Batt LED (Fig.2, #14) lights up at low

  • Agri Alert WM3000, 6 AA-WM3000 rev.02 AA-WM3000 Important Notes Whenever changes have been made to the Recognition Time jumper or to any of the “dip switches” on the receiver or on the transmitters, the on/off switch on the receiver must to moved to the “off” position and then back to the “on” position. This will reset the receiver and will ensure that it is properly aligned with the transmitters that are pro- grammed to it. Always perform a test after making any changes to the dip switches or any of the jumpers. - For maximum range between the transmitter and receiver, the receiver should be mounted horizontally on a wall and as h

  • Agri Alert WM3000, 7 AA-WM3000 AA-WM3000 rev.02 Technical Specifications Frequency 433.92 MHz Type of modulation: FSK modulation Power output: 10 mW Operating voltage: 12VDC 12 volt DC output current: 400 mA maximum Relay output rating: 24VDC at 3 Amp Alarm Signals The WM300Tx sends an alarm signal to the WM3000Rx (and the Agri Alert) when one of the two following situations occurs: Relay Activation When the device connected to the input terminals of the transmitter is activated (the normally open contact closes), the WM3000Tx waits for the Recognition Time and then sends an alarm signal to the WM3000Rx (and the Agri Alert). The

  • 890-00428 rev. 02 REV. 02 Wiring Diagram S W0 ON OFF 5 67 8 910 12 ANTENNA BATTERY 910 S W 1 O U T + O U T - JP1 0 Sec 30 Sec 13 14 ON OFF NO NC COM CHANNEL 1 NO NC COM CHANNEL 2 NO NC COM CHANNEL 3 NO NC COM CHANNEL 4 +- 12 V OUT ON OFF CH 1 CH 2 CH 3 CH 4 1 2311 ANTENNA 4 POWER Figure 2: Transmitter Figure 1: Receiver 1 Dip switches [Receiver] 2 On-Off switch [Receiver]

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Samsung DSR9500 CI Service manual samsung/dsr9500-ci-1X5.pdf 19 Dec 2022 41 1.97 Mb
2 Alen MPF-12CR Owner's manual alen/mpf-12cr-J9P.pdf 05 May 2023 15
3 Yamaha SY-35 Getting started manual yamaha/sy-35-BAY.pdf 10 Aug 2023 49 1.77 Mb
4 UNI-T UT803 Operating manual uni-t/ut803-5HJ.pdf 20 Sep 2023 58 0.33 Mb
5 Chevrolet 2006 Malibu Owner's manual chevrolet/2006-malibu-O8L.pdf 24 Aug 2023 438 2.82 Mb
6 Sennheiser DW 800 User manual manual sennheiser/dw-800-85H.pdf 25 Jan 2023 28

Similar Resources:

  • Mitsubishi

    Diamond Scan 90E

    (31 pages)
    AUTO-SCANNING WITH DIGITAL CONTROLCOLOR DISPLAY MONITORFor future reference, record the serialnumber of your display monitor in thespace below:SERIAL No.The serial number is located on therear cover of the monitor.MITSUBISHIMODELFFT9905SKHFWUSER'S GUIDE …
  • Vitek

    VTM-LCD561

    (2 pages)
    VTM-LCD561ModelVTM-LCD561Display Type5.6" TFT LCD PanelInput SignalNTSC or PALVideo: 1Vp-p/75 ohmAudio: 1Vp-p/100k ohmDisplay FrequencyNTSC: Fh=15.73KHz, fv=60HZPAL: Fh=15.63KHz, fv=50HZDisplay Resolution960 x 234 dpiDisplay ColorFull colorInputVideo Input x2Audio input x2FunctionsFunctions controlled by OSD (On screen display)Audio Volume: Audio outpu …
  • Marantz

    PD5050D

    (1 pages)
    PD5050DPD5050D HD Ready Plasma Monitor*All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz America, Inc. or any of its subsidiaries will not assume any liability for errors in this specsheet which may result in consequential errors being made by retail dealers, designers, custom installers, cabi …
  • Philips

    60PP9401

    (2 pages)
    • 1080i/480p scan with line doubling• 3D Y/C comb filter• Auto IntelliSense™focus• First-surface mirror• Component video input• Front A/V convenience jacks• Protective filter • Two-tuner PIP60" Rear Projection HDTV Monitor60PP940160PP9401 …
  • aci

    A/LCD-R-4-20MA

    (4 pages)
    Automation Components, Inc.2305 Pleasant View Road | Middleton, WI 53562Phone: 1-888-967-5224 | Website: workaci.comPage 1Version: 4.0I00001952.75"(69.85 mm)1.12"(28.55 mm)4.50"(114.30 mm)ROOM, VERSION 1[R]FRONTBOTTOMRIGHTFIGURE 1: ROOM DIMENSIONSROOM SERIESInstallation & Operation InstructionsA/LCD-R-4-20MAPhone: 1-888-967-5224Website …
  • Marantz

    PD4293D

    (2 pages)
    Experience the overwhelming progression in visual technology andsophisticated design. At 3.5" thin, the Marantz PD4293D not only blendsin well in your environment, but will also transform datafrom any graphic medium, from PC to DVD, into art. It displays853 x 480 WideXGA native resolution in a 16:9 aspect ratio, at a stunningcontrast ratio of 1500:1. Th …

Comments, Questions and Opinions: