Manualios.com

AirLive AIRCAM POE-200HD Operation & User’s Manual

  • AIRCAM POE-200HD Security Camera
  • maVEqz4jJg79Q
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 81

AirLive AIRCAM POE-200HD Manual Online:

4.5, 1422 votes
AirLive AIRCAM POE-200HD User Manual
AirLive AIRCAM POE-200HD User Guide
AirLive AIRCAM POE-200HD Online Manual

Text of AirLive AIRCAM POE-200HD User Guide:

  • AirLive AIRCAM POE-200HD, 5. Administrating the Device AirLive AirCam POE-200HD User’s Manual 29 Rotation: Turn the “Mirror” and “Vertical Flip” On or OFF. The image will be overturned as below. White Balance: Auto: will adjust the white balance automatically. Hold: will hold the white balance. Exposure Control: Auto: will adjust the internal gain automatically. Hold: will hold the internal gain. Color Level: Large value will be colorful. Brightness: Large value will brighten camera. Sharpness: Large value will sharpen camera. Contrast: Large value will contrast camera heavily. Night Mode: User can turn Auto or Off of the night mod

  • AirLive AIRCAM POE-200HD, 2. Package Contents AirLive AirCam POE-200HD User’s Manual 6 2.2 Hardware Installation 1. Please select the most suitable position on the wall or ceiling to install the camera. 2. Rotate the dome housing counterclockwise to remove it from the mounting base. 3. Set the mounting base onto the wall or ceiling and center it over the mounting hole, using the two retaining screws for the main body, supplied by the appurtenance bag. 4. For lens adjustment, move the camera body (some model types limits the P

  • 2. Package Contents AirLive AirCam POE-200HD User’s Manual 5 2. RS-485: Connect to a local keyboard controller.  DI/ DO: Connect to sensor in and alarm out devices Cable for I/O connectors: Name Cable Color Function 12VDC Brown/White DC 12V (50mA maximum) GND Blue/White GND D+ Purple/White RS485 data + D- Gray RS485 data - DI

  • AirLive AIRCAM POE-200HD, 5. Administrating the Device AirLive AirCam POE-200HD User’s Manual 24 Streaming RTSP is a streaming control protocol, and a starting point for negotiating transports such as RTP, multicast and Unicast, and for negotiating codecs. RTSP can be considered a "remote control" for controlling the media stream delivered by a media server. RTSP servers typically use RTP as the protocol for the actual transport of audio/video data. RTSP Port: Choose the RTSP port. The RTSP protocol allows a connecting client to start a video stream. Enter the RTSP port number to use. Th

  • 5. Administrating the Device AirLive AirCam POE-200HD User’s Manual 45 Name: User can specify multiple HTTP servers as wish. Therefore, user needs to specify a name for each HTTP server setting. URL: Type the server name or the IP address of the HTTP server. Test: Check the HTTP server whether it is available or not. HTTP Login name: Type the user na

  • AirLive AIRCAM POE-200HD, Appendix G AirLive AirCam POE-200HD User’s Manual 64 Appendix G : DDNS Application 1. Preface If you have a Cable modem or xDSL, this is a great way to host your own Networked Device or other TCP/IP Service. Get your own domain like www.yourname.com, www.yourname.com.tw etc. (Note: This domain must be registered with Internic via registration authorities such as Network Solutions, DirectNIC, Register.com etc). Your domain name's dynamic IP address is automatically tracked by a DDNS server. Host your own Networked Device and much more no matter what your

  • AirLive AIRCAM POE-200HD, 5. Administrating the Device AirLive AirCam POE-200HD User’s Manual 44 Type the password for the FTP server. FTP Port: Set port number of FTP service. FTP Path: Set working directory path of FTP server. FTP Passive Mode: Select passive or active mode connecting to FTP server. TCP Server In addition to send video file to FTP server, the device also can send event message to specified TCP server. Name: User can specify multiple TCP servers as wish. Therefore, user needs to specify a name for each TCP server setting. TCP Server: Type the server name or the IP address of the TCP server. TCP Port

  • AirLive AIRCAM POE-200HD, Appendix B AirLive AirCam POE-200HD User’s Manual 53 Appendix B :Frequently Asked Questions Question Answer or Resolution Features The video and audio codec is adopted in the device. The device utilizes H.264, MPEG4 and JPEG triple compression to providing high quality images. Where H.264 and MPEG4 are standards for video compression and JPEG is a standard for image compression. The audio codec is defined as AMR for 3GPP and G.711/G.726 for RTSP streaming. The maximum number o

  • AirLive AIRCAM POE-200HD, 5. Administrating the Device AirLive AirCam POE-200HD User’s Manual 31 Preset Setting This page provides the edit tool to modify or delete the “Preset Setting” item by item. Tour Setting Up to 128 positions can be preset, and the camera can be programming to move to the preset position sequentially.

  • AirLive AIRCAM POE-200HD, 5. Administrating the Device AirLive AirCam POE-200HD User’s Manual 34 Time zone: Set the time difference from Greenwich Mean Time in the area where the device is installed. Daylight Saving: Disable or enable the daylight saving adjustment. Maintenance Hard Factory Default (Include the network setting): Recall the device hard factory default settings. Note that click this button will reset all device’s parameters to the factory settings (including the IP address). Factory Default (Except th

  • AirLive AIRCAM POE-200HD, Table of Contents AirLive AirCam POE-200HD User’s Manual ii Appendix H : Power Line Frequency......................................................71 Appendix I : 3GPP...................................................................................72 Appendix J :Enable UPnP of Windows XP............................................73

  • AirLive AIRCAM POE-200HD, Appendix E AirLive AirCam POE-200HD User’s Manual 60 Programming Interface SDK Alarm Triggers Intelligent video motion detection and external input Motion Detection 10-zone video motion detection Alarm Events File upload via FTP or email Notification via email, HTTP, and TCP External output activation Go to PTZ preset position Audio alerting output Video Buffer Pre- and post- alarm buffering General RAM 128MB ROM 8MB Power Supply 12V DC external power adapter PoE IEEE 802.3af (for wir

  • AirLive AIRCAM POE-200HD, 4. Operating the Network Camera AirLive AirCam POE-200HD User’s Manual 17 Snapshot Click Snapshot to activate this function. Press Snapshot button to take a picture. The image file is saved as JPEG format into your local PC. Select Browser, the pop-up window to select the save path and file name prefix, select OK to continue. If you like to retrieve the saved image, select the file to display the saved image by using any one of graph editing tools. Voice Click Volume to activate this function. There are two control bars for speaker and microphone volume respectively. Scr

  • AirLive AIRCAM POE-200HD, 5. Administrating the Device AirLive AirCam POE-200HD User’s Manual 35 Firmware Upgrade: The device supports new firmware upgrade (the software that controls the operation in the device). Please contact your dealer for the latest version if necessary. Download the latest firmware file from our website or your dealer. Unzip this firmware file to binary file and store it into your PC. Then follow the steps as bellows carefully: 1. Close all other application programs which are not necessary for firmware update. 2. Make sure that only you access this device while firmware updating. 3. Disable Motion Detection function. 4. Click “Browse” button. Select the Fir

  • AirLive AIRCAM POE-200HD, 5. Administrating the Device AirLive AirCam POE-200HD User’s Manual 20 5.1.1 Network This section provides the menu for connecting the device through Ethernet cable. MAC address: Displays the Ethernet MAC address of the device. Note that user can not change it. Obtain an IP address automatically (DHCP): DHCP: Stands for Dynamic Host Configuration Protocol. Enable this checked box when a DHCP server is installed on the network to issue IP address assignment. With this setting, the IP address is assigned automatically. If this device can not get an IP address within limited tries, the d

  • Appendix I AirLive AirCam POE-200HD User’s Manual 72 Appendix I : 3GPP To use the 3GPP function, in addition to previous section, you might need more information or configuration to make this function work. Note that to use the 3GPP function, it strongly recommends to install the Networked Device with a public and fixed IP address without any firewall

  • AirLive AIRCAM POE-200HD, Appendix D AirLive AirCam POE-200HD User’s Manual 58 Appendix D : Bandwidth Estimation The frame rate of video transmitted from the device depends on connection bandwidth between client and server, video resolution, codec type, and quality setting of server. Here is a guideline to help you roughly estimate the bandwidth requirements form your device. The required bandwidth depends on content of video source. The slow motion video will produce smaller bit rate generally and fast motion will produce higher bit rate vice versa. Actual results generated by the device may be varying. Image Resolution Average range of data sizes fo

  • Appendix G AirLive AirCam POE-200HD User’s Manual 67 (5). Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information“. Click the hyperlink address to confirm the DDNS service that you just applied. Then DDNS you applied activated. (6). Enter the web page http://www.dyndns.org/ again

  • AirLive AIRCAM POE-200HD, Appendix B AirLive AirCam POE-200HD User’s Manual 55 • If it’s not working after above procedure, reset Network Camera to default setting and installed it again. • If the problem is not solved, the Network Camera might be faulty. Contact your dealer for further help. Image or video does not appear in the main page. • The first time the PC connects to Network Camera, a pop-up Security Warning window will appear to download ActiveX Controls. When using Windows XP, or Vista, log on with an appropriate account that is authorized to install applications. • Network congestion may prevent the Image screen from appearing quickly. You may choose lower resolution

  • AirLive AIRCAM POE-200HD, Table of Contents i AirLive AirCam POE-200HD User’s Manual Table of Contents 1. Overview .....................................................................................................1 1.1 Introduction ..........................................................................................1 1.2 Feature ................................................................................................1 1.3 Minimum System Requirements ..........................................................2 2. Package Contents......................................................................................3 2.1 Connections......................

  • AirLive AIRCAM POE-200HD, 5. Administrating the Device AirLive AirCam POE-200HD User’s Manual 50 Record User can choose the type of record file for event or schedule application. Record File Type: Choose AVI or JPEG file format. Record File Prefix: Define the prefix of recorded filename. JPEG Picture Numbers: Define the picture numbers of JPEG to be sent out.

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Aiwa NSX-AW800 Service manual aiwa/nsx-aw800-7KL.pdf 24 Jan 2023 42 3.82 Mb
2 VDO PITOT-TUBE SPEEDOMETER SET Installation vdo/pitot-tube-speedometer-set-T55.pdf 09 Jan 2024 5 0.3 Mb
3 Trotec B 200 Operating manual trotec/b-200-FH1.pdf 11 Mar 2024 36
4 InFocus Work Big IN32 Replacement instructions infocus/work-big-in32-N9R.pdf 16 Sep 2023 2
5 Everpure Contemporary Series Product specifications everpure/contemporary-series-2H7.pdf 02 Jul 2022 2 0.52 Mb
6 Thule Kit 1110 Instruction thule/kit-1110-M78.pdf 01 Dec 2022 8

Similar Resources:

  • Direct

    MPE1033CAM

    (2 pages)
    (4) (5)(1) (2) (3) Security Cameras D MPE1033CAM Megapixel HD Digital Camera Quick Guide 5. Setting Video Signal System 6. Camera Calibration MAIN MENUSDSTORAGESDSTORAGEPAGE0001/0009SettingsESCESCSDSTORAGEPAGE0001/0009SettingsESCESCESCESCNESTPALDigital CMOS SettingDigital CMOS SettingPALSDSTORAGEPAGE0001/0009SettingsESC …
  • Bosch

    DIVAR AN 3000

    (22 pages)
    Product Document type Release # SAP/Doc number DIVAR AN 3000/5000 Release notes V2.3.1 (2015-10-23) Video Recorder DIVAR AN 3000 and DIVAR AN 5000 families Security Systems Release date 2015-10-28 Page 1 of 22 In this release the PIC (Picture) recording mode is disabled because it was not working as specified. This will be correct …
  • XVision

    VIS249D

    (4 pages)
    CCTVModel: VIS238DColour Varifocal DomeCameraCCTVModel:VIS238DColour Varifocal Dome CameraManufactured exclusively for:Xvision (Europe) Group,Head Office: London, U.K.Email: [email protected]: www.x-vision.co.ukTECHNICAL SUPPORT:For Technical Support for any Xvision product please contact your localdistributor.LIMITED WARRANTY:This product is supplied w …
  • Vivotek

    IP8330

    (2 pages)
    VIVOTEK IP8330 is the best bullet-style network camera offering supreme night visibility for diverse outdoor applications. Featuring up to an unbelievable 60 fps at VGA resolution and exceptional low light sensitivity down to 0.1 lux, the VIVOTEK IP8330 captures impressively smooth and crystal-clear video, even at nighttime. In order to adapt to constantly c …
  • Swann

    HD-420

    (2 pages)
    high video quality 1/3" 480 TV Lines CMOSeasily connects to your TV & DVRBNC cable 32ft 10m400day indoor usecolor daytime viewingColorProduct Code: SW221-H42www.swannsecurity.com High PowererdSecurity CameraDiscreet Surveillance to Monitor in DaylightHD-420™Small yet powerful camera with high quality video images™™Advanced security made easyH …
  • Guardzilla

    360 Indoor

    (2 pages)
    FACTORY RE-SETTING AND POWER CYCLINGYOUR GUARDZILLA CAMERA ______________________________________________________________Guardzilla 360 IndoorThis guide describes how to: 1) Factory reset your camera; and 2) Power cycle your camera.Power cycling your camera will retain all your settings. It’s a good first step if you are experiencing issues with y …

Comments, Questions and Opinions: