Manualios.com

Airlink101 AIC250 Operation & User’s Manual

Airlink101 AIC250 Manual Online:

4.55, 2476 votes
Airlink101 AIC250 User Manual
Airlink101 AIC250 User Guide
Airlink101 AIC250 Online Manual

Text of Airlink101 AIC250 User Guide:

  • Airlink101 AIC250, 63 10.2 Enabling ActiveX Follow the steps below to enable ActiveX on your Internet Explorer. Step 1 Click on Tools > Internet Options. Step 2 Select the Security tab and click on Custom Level.

  • Airlink101 AIC250, 58 9.4.10 Others The Others page allows you to set the time interval to scan through each camera in your network. Use the drop-down menu to select the time interval (in seconds) for each scan. Click Save to apply the changes. Click on the Scan Mode button to begin scanning.

  • Airlink101 AIC250, 15 Step 3 Turn the Camera’s lens clockwise or counter-clockwise to focus. Note: ActiveX and/or Java Applet must be installed and enabled on your Web Browser (Internet Explorer or Netscape) before you can view the live videos. Step 4 If you need to install Java Virtual Machine on your computer, do not follow the on-screen XP instructions. Rather, go to http://www.java.com/en/download/manual.jsp and follow the instructions on that web site to download and install the required Java software. The IP Camera is ready for use now.

  • 9 5. Using the Setup Wizard Step 1 Go to Start > (All) Programs > AirLink101 IP Camera Setup Wizard. Step 2 Select the IP Camera you want to configure from the list and click on the Wizard button.

  • Airlink101 AIC250, 36 9.2.1 Adding Camera using the Search Method Before you can do anything, the camera must be added to the Camera List first. If you have more than one camera, you’ll need to add the additional cameras to the list as well. The Search Method is the easiest way to add your local cameras to the list. Step 1 Click on the System Configuration button. Step 2 The System Configuration Window will appear. This is where you configure all of your cameras that have been added to the Camera List.

  • Airlink101 AIC250, 24 7.2.6 Configuration – Upload The Configuration – Upload page allows you to configure the Upload Settings of the Camera. FTP Server: Enter the information for the FTP server that you want to upload the images to. Time Schedule: You can setup a time schedule to always upload or periodically upload images to the designated FTP server. Manual Operation: When you click on the Upload Video ON button in the view image screen, it will start to upload the image and save the image with the file name specified in the Base File Name field. Click Save to apply the new settings.

  • Airlink101 AIC250, 43 9.3.1 Status Mode Window The Status Mode Window displays a list of cameras that are added to IPView Pro as well as the status of each selected camera. Select the desired camera from the list then click on the Change Status Mode button to view the status of the camera.

  • 19 7.1.4 Management – User The Management – User page displays all the Active Users who are currently connected to the Camera. You can click on Refresh to update the page. 7.2.1 Configuration – System The Configuration – System page allows you to configure the System Settings of the Camera. Camera Name: You can assign a user-friendly name for the camera. Loca

  • Airlink101 AIC250, 10 Step 3 If the Camera’s default IP Address is on a different subnet, the following message will appear. Click Yes to continue. Note: If you do not receive this message, skip to Step 9. Step 4 Enter admin for both the Admin ID and Password and click OK. Step 5 In the IP Address field, change the first three numbers to match your local network address. For example: If your computer’s IP Address is 192.168.2.100, change the first three numbers to 192.168.2 as well but leave the last number 240 alone.

  • Airlink101 AIC250, 50 9.4.3 Motion Configuration-1 The Motion Configuration-1 page allows you to set the Motion Detection settings. Select the desired camera from the drop-down menu. Detect Region: When you select Full picture, the camera will monitor the entire screen. Sensitivity Level: Adjust the slide bar to set the sensitivity level of the motion detection. Once motion is detected, recording will begin if you have enabled Motion Record from the Record Button. Click Save to apply the changes. At the Record Button, select Motion Record. Recording will begin when motion is detected.

  • 67 Step 3 Go to Configuration – Network and enter the IP Address of your Default Gateway and DNS Server. Click Save to apply the changes. Step 4 Go to Configuration – User and enable the User Access Control and create a user account. Click Save to apply the changes.

  • Airlink101 AIC250, 46 9.3.3 Control Panel The Control Panel contains essential buttons for operating IPView Pro. Key Lock: The Key Lock button locks all the buttons on the IPView Pro for security purposes. If you have enabled a password login for IPView Pro, you’ll need to input the same password to unlock the key lock. Power: Click on the Power button and select to Exit or Minimize IPView Pro. Record: Click on the Record button and select Manual Record to record the video immediately

  • Airlink101 AIC250, 26 7.3.1 Tools – FTP Server Test The Tools – FTP Server Test page allows you to test the FTP Server Settings of the Camera. Click on Test to perform the test. A jpeg file will be uploaded to the FTP server you specified. 7.3.2 Tools – E-mail Test The Tools – E-mail Test page allows you to test the E-mail Settings of the Camera. Click on Test to perform the test. An e-mail will be sent to the e-mail account you specified.

  • Airlink101 AIC250, 48 9.4 System Configuration The System Configuration Window is where you configure the settings of IPView Pro and all the cameras that are added to the Camera List. 9.4.1 Camera Configuration The Camera Configuration page allows you to add the cameras in your network to IPView Pro’s Camera List. For instructions on how to do add your cameras, please refer to Section 9.2.1 Adding Camera Using the Search Method.

  • Airlink101 AIC250, 27 7.3.3 Tools – Reset The Tools – Reset page allows you to Reset the Camera. Click on Yes to perform the reset. 7.3.4 Tools – Factory Reset The Tools – Factory Reset page allows you to perform a Factory Reset on the Camera. Click on Yes to reset the Camera and return all the settings to the factory default. Note: Performing a factory reset will erase all of your previously saved settings.

  • Airlink101 AIC250, 55 9.4.8 Recording Configuration The Recording Configuration page allows you to set the recording’s storage settings. Reserved HDD Space for MS-Windows OS: Use this drop-down menu to select the size of the hard drive space you want to reserve for your Windows operating system. (500 MB – 1000 MB). Each Recording File Size: Use this drop-down menu to select the maximum size allowed for each recorded video. When a video reaches the maximum limit, a new file will be created. (10 MB – 50 MB). Storage List: Use the Add, Modify, Delete buttons to add, modify, and delete individual storage paths. The storage path indicates where t

  • Airlink101 AIC250, 47 Play: Click on the Play button to playback the recorded videos from your hard drive. A window will appear asking you for the location of the recorded video. Select the desired video and click OK to begin playback. System Configuration: Click on the System Configuration Button to open the System Configuration Window.

  • Airlink101 AIC250, 5 2. Getting Started Note: Before using the IP Camera, you’ll need to perform the following tasks: 1. Connect the IP Camera to your network. 2. Install the Setup Wizard. 3. Gather information about your local network address. 4. Configure the IP Camera using the Setup Wizard. Please follow the steps in this Manual carefully to ensure proper setup of the IP Camera. Caution: The IP Camera is designed for indoor use only. Direct exposure to sunlight may cause permanent damage to the CMOS sensor. When operating in extremely bright environment, an iris lens or sun visor is recommended to protect the IP Camera. Step 1 Con

  • 25 7.2.7 Configuration – E-mail The Configuration – E-mail page allows you to configure the E-mail Settings of the Camera. E-mail Account: Enter the information for your SMTP E-mail account that you want to e-mail the images to. Time Schedule: You can setup a time schedule to always e-mail or periodically e-mail images to the designated e-mail account. Manual Operat

  • Airlink101 AIC250, 20 7.2.2 Configuration – Video The Configuration – Video page allows you to configure the Video Settings of the Camera. Video Resolution: Select the desired video resolution. Compression Rate: Select the desired video compression rate. Higher compression rate yields smaller file size but with less video quality and vice versa. Frame Rate: Select the desired frame rate. Brightness Control: Adjust the brightness level. Contrast Control: Adjust the contrast level. Saturation Control: Adjust the saturation level. Light Frequency: Adjust the li

  • Airlink101 AIC250, 17 The Management page appears by default. You can select different pages at the Top Menu Bar, while Sub-menus for each page are available at the left-hand side. 7.1.1 Management – System The Management – System page displays the Device and Ethernet Status of the Camera. You can click on Refresh to update the page.

  • Airlink101 AIC250, 13 Step 11 If you need to change the Camera’s IP Address because another network device is already using the same address, you can assign a new address here and click Next. Step 12 Verify all the fields are correct and click Restart to save the settings and reboot the Camera.

  • Airlink101 AIC250, 32 Step 5 Enter your ISP’s DNS IP Address at the DNS IP Address field. Step 6 Select Enable for the Second HTTP Port and enter a Port Number for the Camera (default is 81). Important: You must assign a port number that’s not in use by any other application on your network. Step 7 Click Save to apply the new settings. Now the Camera with IP Address of 192.168.1.240 has port 81 Open. Step 8 From one of the computers in Network A, login to the web configuration utility of Network A’s router. Step 9 Navigate to the router’s Virtual Server or Port Forwarding page. Step 10 Enable Forwarding of port 81 to the

  • 62 10. Xplug Control If you need to install/enable ActiveX for your web browser (Internet Explorer), please follow the steps below. 10.1 Installing Xplug Control Step 1 At the Web Configuration screen, click on View Video – ActiveX Mode. Note: If you are able to see the video, you already have ActiveX installed and enabled. If you do not see the video, continue

More Instructions:

DOWNLOAD

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Dynasty Spas MC-MP-DY2 Quick reference card dynasty-spas/mc-mp-dy2-36F.pdf 09 Nov 2022 2 0.44 Mb
2 Amana AER3311WA Product dimensions amana/aer3311wa-772.pdf 06 Feb 2023 1 0.09 Mb
3 Hitachi Koki C 12RSH2 Handling instructions manual hitachi-koki/c-12rsh2-8YY.pdf 04 Mar 2024 84
4 M-Audio X-Session Quick start manual m-audio/x-session-9W9.pdf 11 Dec 2023 12
5 ProFlow PF-OXY1 Technical manual proflow/pf-oxy1-J8K.pdf 20 Sep 2022 36
6 Marantec Comfort 220 Installation and operation instructions manual marantec/comfort-220-FIJ.pdf 07 May 2023 32

Similar Resources:

  • Sony

    SSCFB530

    (2 pages)
    KEY FEATURES700 TV Line Security Camera with Wide Dynamic RangeHorizontal resolution of 700 TV lines (sharp mode) CS mount lens not includedCompact designElectrical Day/Night functionWide Dynamic Range With DynaViewSX TechnologyThe SSC-FB530 incorporates DynaViewSX technology to capture high-contrast scenes and produce clear images even under challenging lig …
  • Vivotek

    SUPREME use IP FE9582-EHNV

    (356 pages)
    User’s ManualFE9582-EHNVFisheyeNetwork Camera5MP • Vandal-proof • 360º Surround View • 10M IR Smart Stream II • Pixel Calculator • EN50155 • EN45545Rev. 1.0 …
  • Honeywell

    HD70P

    (2 pages)
    The Performance Series rounds out Honeywell’s camera portfolio with a variety ofindoor, outdoor and low light cameras that lets end users pick the perfect camerafor virtually any installation. Ideal for a diverse range of applications, thePerformance Series includes a wide range of high performing IR bullet camerasand mini-domes that are easy to install an …
  • Vicon

    V1020-WIR-180-1

    (70 pages)
    Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed to be used in life-critical situations and must not be used for this purpose. Document Number: 8009-8304-1 …
  • Lorex

    SG7209P

    (1 pages)
    B U S I N E S S A N D H O M E S E C U R I T Y• Weather resistant* housing ideal for indoor/outdoor use • Built-in microphone for listen in audio• 6 LED’s for viewing up to 2m in low light conditions • Mounting mounting bracket ideal for wall or table mounting applications• 20 m cable included* Weather resistant against dust an …
  • SLI

    EV-1026-N2GQ

    (4 pages)
    1/3” Sony CCD Color  IR Day/Night  Weatherproof 24 LEDs  Up to 50ft (15m) Range  Split-Glass Technology # Model Number Case Color Lens Size Viewing Angle Resolution (TV Lines) 1 EV-1026-N2GQ Dark Gray 2.9mm 120° 420 2 EV-1026-N3GQ Dark Gray 3.6mm 92° 420 3 EV-1026-N6GQ Dark Gray 6.0mm 53° 420 4 EV-1026-N2SQ Silver 2.9mm 12 …

Comments, Questions and Opinions: