Chuango G5 Operation & User’s Manual

Text of Chuango G5 User Guide:

• Chuango G5, 42 41 Wireless PIR Motion Detector Features PIR-900 is a high performance wireless P.I.R. motion detector. It consists of digital dual-core fuzzy logic infrared control chip and intelligent analysis which effectively identify interference signals from body movemen t signals and reduce false alarm rate. With automa tic tempe rature comp ensation and anti-air turbulence technology, it easily adapts to environme ntal changes. The detector also has the advantages of energy saving, reliability and easy installation. Appearance 1 2 3 1. Detection window 2. LED in

• 38 37 Appearance Wireless Door/Window Contact Features LED indicator Transmitter Magnet The DWC- 102 is a Door/Window Contact (Two-way) that can be installed on doors, windows, and any other objects that open and close. The sensor transmits signals to the control panel when a mag net mou nted near the sensor is mov ed away. It will also transmit alert signal to the control panel

• Chuango G5, 10 9 ??? SMS Operation System replies third grade guide menu: ‘91~99’ Zone name ‘10’ RFID tags SMS notice ‘11’ Entry and exit delay time ‘12’ Siren volume and ringing time ‘13’ Disarm password ‘14’ Single zone delay time Send: ?? ‘5’ Store alarm phone No. ‘6’ Store alarm SMS No. ‘7’ Store SMS No. for RFID tags ‘8’ Store speed dial phone No. ‘???’ System setups System replies second grade guide menu: Send: ? Insert a SIM card to the control panel, then send a

• Chuango G5, 91 Change Zone Name Special Tips! st th Users can change the 1 ~ 9 zone names. The zone name should be 30 English characters at most for each line due to SMS character limit. Other alarm zones are fixed as Zone 10 alarm, Zone 11 alarm and so on. Send: 91~99 Zone1 name: Zone 1 alarm Zone1 name: Entrance door sensor Forward > Edit SMS Alert for Low Battery of Accessories (available for two-way accessories such as DWC-102 and PIR-900/910) SMS will be sent for 1-9 zones with its zone name as “Zone name + low battery”. SMS alert for 10~50 zones will be “Zone

• Chuango G5, 48 47 Fix the bracket on the wall with screws and attach the detector to the bracket. Adjust installation height or bracket to change the detection distance and angle. It is recomme nded to mou nt it at the height of 2m from the ground. The detector is more sensitive to the cross mov emen t than to the vertical mov ement, so the performance of detector is best when the detection direction is vertical to the walking direction of people. Detection Scope 2m 4m 6m 8m0m 0m 2m 110° Top view Side view Testing (Walk Test) A. After installation, power on the detector. Af ter one minute self-testing, press the test button, walk in

• Chuango G5, 8 7 Speed Dial Press Call Button , the panel auto dials to pre-stored phone number of the host, the LED blacks out after talk. User can also press Call Button to end talk. RFID Tag The RFID tag is for disarming the system and unlocking the electronic door lock (if connected). You can rename the RFID tags and store a mobile phone number to send SMS notice when family members come home and disarm the system. Note! Only after SMS No. is stored, and the RFID tags SMS notice is changed (4 RFID tags can be renamed), users can rec

• Chuango G5, 49 Specifications Power supply Static current Alarm current Detection scope Transmitting distance Radio frequency Housing mat erial Operation condition Detector dimensions (L x W x H) Bracket dimensions (L x W x H) DC 3V (AA 1.5V LR6 Battery x 2 pcs) ≤ 50uA ≤ 9.5mA 8m/110° ≤ 80m (in open area) 315MHz or 433MHz (± 75KHz) ABS plastic Tempe rature: -10°C~55°C Relative humidity: ≤80% (non-condensing) 108 x 52 x 36.8 mm 52 x 30 x 26.5 mm 50 Zone Setup for Wireless Sensors Home Mode Zone Normal Zone The PIR motion detector is set in Home Mode Zone in default. It is recommended to set Door/Window Contact on entrance in Single Delay Zone. Users should rec

• Chuango G5, Specifications GSM/SMS/RFID Security Alarm System CG-G5 Input: AC 110-240V, 50/60Hz Output: DC 12V 500mA 850/900/1800/1900MHz 110mA 340mA Lithium Battery : 3.7V 800mAh x 2 PCS (BL-5B) 95dB 10pcs remote controls, 50pcs wireless sensors and 50pcs RFID tags. 315MHz or 433MHz (±75KHz) ABS plastic Temperature: -10ºC~55 ºC Humidity: ≤ 80% RH (non-condensing) Panel : 188×132×26mm Product name : Model No. : Control panel’s power supply : GSM working frequency : Standby current : Alarm current : Internal battery backup : Internal siren : Allowed amount of expandable wireless

• Chuango G5, Included Accessories 2 1 The control panel is known as the “heart and brain” for alarm system, which is used for receiving and processing signals from wireless sensors and remote controls. Users can make settings freely by GSM cell phone and Apps. In case of emergency, the panel rings on site and dials the pre-stored alarm phone numbers automatically. When users pick up the phone, they are able to hear the voice recording alert and choose to monitor on site or disarm the system. *Input keywords “G5” in Google Play or App Store to download free App for remote controlling and setting the alarm system anytime and anywhere. The wireless

• Chuango G5, 40 39 Installation & Notice Remove the battery activation strip,the sensor will enter working state immed iately. Mou nt the sensor on the door frame and the magnet on the door. Mak e sure the mag net is on the right side of the transmitter Place the transmitter in the desired location, mount the magnet no more than 1cm away from the transmitter and secure the transmitter and magnet with double-sided tapes or screws. Avoid mou nting sensors in areas with a large quantity of metal or electrical wiring, such as a furnace or u

• Chuango G5, 1312 Siren Volume and Ringing Time Disarm Password Send: Send: Siren volume(0 Mute, 1 Low, 2 High): 2 Siren ringing time(1-9min): 5 Forward > Edit Disarm password(4-6 digits): 1234 Disarm password(4-6 digits): 8888 Forward > Edit 24 23 Set siren volume and ringing time successfully. Set disarm password successfully. Siren volume(0 Mute, 1 Low, 2 High): 1 Siren ringing time(1-9min): 3

• Record / Play Voice Memo Press for 2 seconds to record 10 seconds voice messages. Or send SMS to system for calling back to record the voice messages. The Play Voice Memo Button will be flashing in green to remind you. Users can touch the center of circle to listen to the voice memo. The LED indicator blacks out when the voice memo is played. Replay by touchi

• 30 29 Once the alarm system is triggered, the control panel will send SMS in turns, and then will make calls in turns. The first round of dialing, each stored phone number will get the phone call. From the second round, as long as one user picks up the phone, the control panel will stop dialing to next number. Alarm Notification Ways Phone Remote Control Instruction User can control t

• Chuango G5, 产品型号 CG-G5 林寿 说明书 设 计 印刷尺寸 工 艺 部件名称 材 料 版 本 注: 双色、双面印刷 成品尺寸 105X145mm 80克书写纸 骑马钉-56P 210X145mm PA: OI-G5-EN-1309-V2.2-UK

• Chuango G5, 46 45 In working state, if the sensor is triggered twice within 3 minutes, it will enter sleeping mod e to save power. Af ter no movement within next 3 minutes, the sensor goes back to the working mode. Press the connect key on the alarm panel, and then press the test button of the sensor twice to send alarm signal. When one beep is heard, they are connected. To check if they are connected successfully, arm the system, and trigger the sensor again, if there is an alarming, the connection is successful. Working mod e: Connect to alarm pan el: Installation & Notices 2m Ground Avoid mou nting the detector close to windows, air conditioner, heater, ref

• Chuango G5, 44 43 PCB Layout AA 1.5V LR6 AA 1.5V LR6 Infrared sensor Zone setting LED ON / OFF Tamper switch Infrared sensor: Tamper switch: It detects the infrared rays released by human body motion, please don’t touch the surface and always keep it clean. Once the case is opened in working state, the tamper switch will be triggered and then generates an alarm signal. Mode Setting Test Button Testing mod e: After self-testing, press the test button, the sensor enters testing mod e, and detects once ever y 10 seconds. After 3 minutes, the LED flashes twice, and the sensor enters the working mode. Usage Remove the battery activation strip to activate batteries. It

• Chuango G5, Store Alarm SMS No. 16 15 6 Send: SMS: 1. 2. 3. 4. 5. SMS: 1. 67890033 2. 67890022 3. 67890011 4. 67890000 5. Forward > Edit Store alarm SMS No. successfully. 5 Send: Store Alarm Phone No. TEL: 1. 2. 3. 4. 5. TEL: 1. 67890033 2. 67890022 3. 67890011 4. 67890000 5. Forward > Edit Store alarm phone No. successfully. Special Tips: Firewall feature is adopted to prevent non- stored phone no. and SMS no. to remote control the system and change settings. Special Tips: Please edit on the basis of the replied text and don't change the format. Otherwise, the system will not recognize the command.

• Chuango G5, 22 Delete Wireless Sensors Delete Remote Controls Send: Send: Send: Delete RFID Tags 28 27 21 Delete wireless sensors successfully. Delete RFID tags successfully. Note: Press Tamper Switch 3 times within 3 seconds, all wireless sensors, RFID tags, and remote controls will be deleted after two beeps. 23 Delete remote controls successfully.

More Instructions:

	Chuango G5 Installation manual 13-12-2023 29	DOWNLOAD
	Chuango G5 Operation & user’s manual 15-09-2023 29	DOWNLOAD
	Chuango G5 Manual  24-01-2023 18	DOWNLOAD

Related Products and Documents (Security System):

Comparable Devices:

Similar Resources:

• DSC LINKS 2150 (12 pages) InstallationManualTMLong Range RadioAlarm TransmitterVersion 1.4W• W A R N I N G •Please refer to the System Installation Manual for information on limitations regarding product use andfunction and information on the limitations as to liability of the manufacturer. …

• Honeywell 702 (1 pages) No.702 ELECTRONIC SIREN GENERAL INFORMATION: FEATURES *Siren and Driver Combined *Extreme I y Loud Sound *Dua I Channe I - Yelp or Steady *6 to 12 Volt DC Operation *Attractive Appearance *Enclosed Wires for Tamper Protection *Easi I y Tampered *Weatherproof The No. 702 Electronic Siren is a combination driver and speaker …

• Lorex LW2310 Series (76 pages) LW2310 Serieswww.lorextechnology.comInstruction ManualEnglish Version 3.0Copyright © 2011 Lorex Technology Inc.Digital Wireless Video Monitoring & Recording System …

• Protect 2200i (20 pages) PROTECT™ 2200i · PROTECT™ 1100i · PROTECT™ 600iCopyright 2012, PROTECT A/S – DenmarkVersion 4.6Installation ManualInstallation ManualManuel d’installationManuale installatoreManual de la instalaciónInstallationsmanualFIEGBDK …

• Eaton CROUSE-HINDS Ex - d Series (44 pages) Explosionsgeschützte Ex - d (e) Steuereinheit, Verteilung aus Leichtmetall GHG 64Explosion-protected flameproof control station and distributions, Ex - d (e) Series: GHG 64BetriebsanleitungOperating instructionsMode d’emploiCROUSE-HI NDSSERIESGHG 640 7004 P0001 D/GB (d) …

• AKO AKO-55326 (2 pages) WarningsThe alarm and pushbuttons must be installed in a place protected from vibrations, water and corrosive gases, where the ambient temperature does not exceed the value indicated in the technical data.The station must be installed in a place where the regular presence of people who can alert to the presence of alarms is guaranteed.Neither the alarm nor t …

Comments, Questions and Opinions: