Manualios.com

ALLIANCE Frontload Washers Installation Instructions Manual

  • Frontload Washers Washer
  • manq6EI29./AA
  • Installation Instructions Manual
  • PDF / Adobe Acrobat Reader
  • 26

ALLIANCE Frontload Washers Manual Online:

3.6, 2684 votes
ALLIANCE Frontload Washers User Manual
ALLIANCE Frontload Washers User Guide
ALLIANCE Frontload Washers Online Manual

Text of ALLIANCE Frontload Washers User Guide:

  • ALLIANCE Frontload Washers, REMARQUE : Le guide est rédigé en anglais et en français. La version française figure à la suite de la version anglaise. Keep these instructions for future reference. (If this machine changes ownership, this manual must accompany machine.) www.comlaundry.com Installation Instructions for Frontload Washers Washer Dimensions........................................................... 2 Before You Start................................................................ 2 Installation......................................................................... 3 Installer Checklist.............................................. Back Cover Date Purchase

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802754R4 2 Washer Dimensions Before You Start Supplies For most installations, the basic supplies you will need are: Parts Included An accessories bag has been shipped inside your washer. It includes:  Two fill hoses with washers and filter screens. Refer to step 2 of Installation.  Four rubber feet. Refer to step 4 of Installation.  Beaded strap. Refer to step 3 of Installation.  Installation Instructions.  User’s Guide.  Warranty Bond. NOTE: If the washer is delivered on a cold day (below freezing), or is stored in an unheated room or area during the cold months, do not attempt to

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 3 802754R4 Installation Step 1: Position Washer Near Installation Area Move washer as close to the desired area of installation as possible. NOTE: For best performance and to minimize vibration or movement, install washer on a solid, sturdy and level floor. Some floors may need to be reinforced, especially on a second floor or over a basement. Do not install the washer on carpeting, soft tile, a platform or other weakly supported structures. Step 2: Position and Level the Washer Position washer so it has sufficient clearance for installation and servicing. NOTE: Use of the dispenser drawer or washer

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802754R4 4 Step 3: Connect Fill Hoses Water Supply Water supply faucets must fit standard 19.1 mm (3/4 inch) female garden hose couplings. DO NOT USE SLIP-ON OR CLAMP-ON CONNECTIONS. Water supply faucets should be readily accessible to permit turning them off when washer is not being used. Recommended cold water temperature is 16 o to 27 o Celsius (60 o to 80 o Fahrenheit). Recommended maximum hot water temperature is 51° Celsius (125° Fahrenheit). Warm water is a mixture of hot and cold water. Warm water temperature is dependent upon

  • © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5 802754R4 IMPORTANT: Hoses and other natural rubber parts deteriorate after extended use. Hoses may develop cracks, blisters or material wear from the temperature and constant high pressure they are subject to. All hoses should be checked on a monthly basis for any visible signs of deteriorat

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802754R4 6 Wall Installation: For installations of this type, the drain hose MUST be secured to one of the fill hoses using the beaded strap from accessories bag. Refer to Figure 7. NOTE: End of drain hose must not be below 61 cm (24 in.). Laundry Tub Installation: For this type of installation, the drain hose MUST be secured to the stationary tub to prevent hose from dislodging during use. Refer to Figure 8. Use the beaded strap (supplied in accessories bag) to secure hose. H023I 1 Drain Hose 2 Beaded Strap (tape if necessary) 3 Fill Hoses Figure 7 3 1 2 FLW1961N 1 Drain Hose 2 Beaded Strap

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 7 802754R4 Step 5: Remove the Shock Sleeves and Shipping Brace Remove front access panel by removing the two screws at the bottom of the panel. Remove the five bolts and lockwashers from shipping brace with 9/16 inch wrench and remove brace. Refer to Figure 9. One is holding the brace to the weight. Remove this bolt first. Four bolts are located on the washer base. Remove the two front bolts next and then the two rear bolts. Remove shock sleeves by pulling on the yellow rope. Refer to Figure 9. Remove the brace from the machine with shock sleeves and label attached to it. For older mo

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802754R4 8 Step 7: (Supply Injection Models Only) Connect External Supplies to Washer IMPORTANT: Undiluted chemical dripping can damage the washer. 1. Remove two nozzles from accessories bag. Use either the 3/8 inch or 1/4 inch nozzles, depending on the diameter of the dispenser tubing used. 2. Attach nozzles to rear of machine. Connection point located on cabinet, above water mixing valve. Refer to Figure 11. 3. Connect supply hoses to nozzles and secure with hose clamps (obtain locally). Refer to Figure 11. N

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9 802754R4 These terminals may be used to provide signals to the supply injection system but must not be used to provide power to the actual pump. Any injection system pump which requires 110 VAC must be powered by a separate external power source. Control Function Test The washer should be cleaned after the installation is complete. A function test should then be executed on the unloaded machine: 1. Check the power supply for such characteristics a

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802754R4 10 Grounding Information The washer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The washer is equipped with a cord having an equipment-grounding conductor and a 3-prong grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided with the washer - if it will not fit the outlet, have a proper outlet installed

  • ALLIANCE Frontload Washers, Conserver ces instructions à titre de référence. (Si la machine est vendue, le guide doit être remis au nouveau propriétaire.) www.comlaundry.com Instructions d’installation Machine à laver à chargement frontal Dimensions de la machine à laver..................................... 12 Avant de commencer......................................................... 12 Installation......................................................................... 13 Liste de vérification de l’installa

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802754QUR4 12 Dimensions de la machine à laver Avant de commencer Fournitures Pour la plupart des installations, ces outils de base seront nécessaires : Figure 2 Pièces incluses La machine à laver est expédiée avec un sac d’accessoires qui comprend :  Deux tuyaux de remplissage avec rondelles et filtres. Se reporter à l’étape 2 de la section Installation.  Quatre pieds en caoutchouc. Se reporter à l’�

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 13 802754QUR4 Installation Étape 1 : Placer la machine à laver près de l’emplacement de l’installation Placer le lave-linge aussi près que possible de l’emplacement choisi pour l’installation. REMARQUE : Pour obtenir le meilleur rendement possible et minimiser les vibrations ou les déplacements, installer la machine à laver sur un plancher solide et bien droit. Il peut être nécessaire de renforcer certains planchers, en particul

  • © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802754QUR4 14 Étape 3 : Connecter les tuyaux de remplissage Approvisionnement en eau Les robinets d'approvisionnement en eau doivent s'ajuster à des raccords femelles de tuyau d'arrosage de 19,1 mm (3/4 po). NE PAS UTILISER DE RACCORDS À ASSEMBLAGE COULISSANT OU À ANNEAU DE SERRAGE. Les rob

  • © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 15 802754QUR4 REMARQUE : De plus longs tuyaux sont disponibles (en équipement livré en option à coût supplémentaire) si ceux livrés avec la machine à laver ne sont pas assez longs pour l’installation. Commander les tuyaux de la manière suivante : No. 20617 tuyau de remplissage

  • © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802754QUR4 16 Installation de la colonne montante Placer l’adaptateur dans la colonne montante. Retirer la courroie perlée du sac d’accessoires. La placer autour de la conduite verticale et du tuyau de vidange et la resserrer pour fixer le tuyau à la conduite verticale . Se reporter à la

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 17 802754QUR4 Installation au bac à laver Pour ce type d’installation, le tuyau de vidange DOIT être bloqué au bac fixe afin d’empêcher le tuyau de se déplacer pendant l’utilisation de la machine. Se reporter à la Figure 8. Fixer le tuyau à l’aide de la courroie perlée (fournie dans le sac d’accessoires). Figure 8 Étape 5 : Enlever les manchons anti-chocs et l’attache d’expédition Retirer le pann

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802754QUR4 18 REMARQUE : Conserver l’attache d’expédition, les écrous, les contre-écrous et les manchons et les INSTALLER dès que la machine est déplacée de plus de 1,22 mètre (4 pi.). Ne pas soulever ou transporter la machine sans que le panneau avant et tout le matériel d’expédition ne soient installés. Se reporter au Guide de l’utilisateur pour y trouver les instructions sur la manière de reinstaller le matériel d’expédition. IMPORTANT : Ne pas incliner la machine à laver de plus de 152,4 mm (6 pouces) dans quelque direction que ce soit une fois l'attache d'expédit

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 19 802754QUR4 Figure 11 Dans la boîte de jonction située sur le panneau arrière, une plaque à borne envoie des signaux aux pompes du dispositif de distribution automatique des produits de lessive. Ce sont des contacts secs. Il faut mettre l'appareil sous tension. Se reporter à la Figure 12 qui montre la vignette d'interface du dispositif de distribution automatique. Figure 12 Les bornes peuvent servir à envoy

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802754QUR4 20 Étape 8 : Brancher la machine La machine à laver doit être branchée à une alimentation électrique de 120 V, 60 Hz, et elle est munie d'une prise de mise à la terre à trois broches. Consulter la plaque de série pour connaître la configuration électrique spécifique. Figure 13 Lors du branchement de la machine à laver :  NE PAS surcharger les circuits.  NE PAS utiliser une rallonge.  NE PAS utilise

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 21 802754QUR4 Informations concernant la mise à la terre La machine à laver doit être mise à la terre. En cas de mauvais fonctionnement ou de claquage, la mise à la terre réduira les risques de choc électrique en fournissant un chemin de résistance moindre pour le courant. La machine à laver est munie d'un cordon avec conducteur de mise à la terre et d'une fiche à trois broches avec mise à la terre. La fiche doit être branchée dans une prise murale adéquate installée et mise

  • ALLIANCE Frontload Washers, © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installer Checklist Fast Track for Installing the Washer (Refer to the manual for more detailed information) Liste de vérification de l’installateur Liste permettant de vérifier rapidement l’installation de la machine (Se reporter au manuel pour de plus amples informations) • Position Washer Near Installation Area. • Placer la machine à laver près de l’emplacement de l’installation. 1 CHECK VÉRIFIÉ • Position and Level the Washer. • Placer et mettre la machine à niveau. 2 FLW2154N FLW2154N CHECK VÉRIFIÉ • Connect Fill Hoses. • Connect

Related Products and Documents (Washer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Freecom AIT-260i Specifications freecom/ait-260i-MT2.pdf 12 Jun 2023 2 0.24 Mb
2 JVC AV-14FMT3, AV-21DMT3, AV-21LMT Instructions manual jvc/av-14fmt3-av-21dmt3-av-21lmt-71B.pdf 18 Sep 2023 64
3 American Standard Hampton 4770.702 SERIES Repair parts american-standard/hampton-4770-702-series-M2H.pdf 24 Sep 2023 1 0.11 Mb
4 Edimax ES-1008PH Quick installation manual edimax/es-1008ph-YU9.pdf 01 Apr 2023 8 0.71 Mb
5 Vaisala DRYCAP DMT345 Operation & user’s manual vaisala/drycap-dmt345-VF5.pdf 02 Jul 2023 157 2.66 Mb
6 Roller Grill BAR 1000 Instructions for use and installation roller-grill/bar-1000-3OA.pdf 18 Apr 2023 8

Similar Resources:

  • DAVIS

    Leaf Wetness Sensor

    (8 pages)
    Product # 7846 & 7848 L EAF W ETNESS S ENSOR S TANDARD & I NDUSTRIAL I NSTALLATION M ANUAL The leaf wetness sensor enables the GroWeather™ to detect the presence of surface moisture on foliage and calculate the duration of wetness. When mois-ture is present, the sensor detects an electrical resistance change between the gold-plated elements of …
  • Whirlpool

    AWT-55S

    (19 pages)
    This document is only intended for qualified technicians who are aware of the respective safety regulations. First release Date 12th Mar, 2003 Subject to modification Document No. WOI/WM/2003/009 Twin Tub Washing Machine PARTS & SERVICE Manual MODEL Sap Model No Description 6111 AWT-55S GREY (Philippines) 6301 AWT-55S ALMOND ( …
  • Maytag

    MAV5057

    (12 pages)
    *QOOOOIOOOeOOOOOTABLE OF CONTENTSWelcome ..................... Inside CoverSafety Instructions ....................... 1Controls At A Glance ................ 2-3MAYFAGOperating 13ps ........................... 4-5Care and Cleaning ........................ 6Storing the Washer ...................... 6Before You Call .......................... 7-8_Warranty .... …
  • Siemens

    WM14T660ME

    (44 pages)
    Registeryourproductonlineens-home.com/welcomesiemens-home.com/welcomeHQ :DVKLQJPDFKLQH,QVWUXFWLRQ0DQXDODQG,QVWDOODWLRQ,QVWUXFWLRQVWashing machineWM14T660ME …
  • Samsung

    SW50USP

    (24 pages)
    8BTIJOH.BDIJOFVTFSNBOVBMJNBHJOFUIFQPTTJCJMJUJFT5IBOLZPVGPSQVSDIBTJOHB4BNTVOHQSPEVDU5PSFDFJWFBNPSFDPNQMFUFTFSWJDFQMFBTFSFHJTUFSZPVSQSPEVDUBUXXXTBNTVOHDPNHMPCBMSFHJTUFS48641 …
  • Bosch

    Vision 800 Series

    (36 pages)
    SERVICE MANUAL for 800 Series Gas Slide-in Ranges HGI8054UC This manual contains information that is necessary for servicing the following Bosch gas slide-in ranges: HGI8054UC This manual is designed to be used by qualified service personnel only. Due to the complexity and the risk of …

Comments, Questions and Opinions: