Manualios.com

Digimerge DH100 Series Instruction Manual

Digimerge DH100 Series Manual Online:

3.1, 1149 votes
Digimerge DH100 Series User Manual
Digimerge DH100 Series User Guide
Digimerge DH100 Series Online Manual

Text of Digimerge DH100 Series User Guide:

  • Digimerge DH100 Series, © Digimerge Technology Inc. www.digimerge.com VISIT / VISITEZ / VISITE www.digimerge.com IT’S ALL ON THE WEB! Tout est sur le Web! ¡Todo está en la Web! Product Information Information sur le produit Información acerca del producto User Manuals Guides de l’utilisateur Guías del usuario Quick Start Guides Guides de démarrage rapide Guías de arranque rápido Specification Sheets Fiches signalétiques Fichas de especificaciones Software Upgrades Mises à jour du logiciel Actualizaciones del programa Firmware Upgrades Mises à jour du micro-logiciel Actualizaciones del microprograma

  • Digimerge DH100 Series, Thank you for purchasing this product. Digimerge is committed to providing our customers with a high quality, reliable security solution. This manual refers to the following models: • DH100 Series For more information on this product, firmware updates, and accessory products, please visit us at: www.digimerge.com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead

  • 121 Troubleshooting TROUBLESHOOTING When a malfunction occurs, it may not be serious and can be corrected easily. The following describes the most common problems and solutions. Please refer to the following before calling Digimerge Technical Support: Error Possible Causes Solutions • DVR is not receiving power, or is not powering up • Cable from power adapter is loose

  • Digimerge DH100 Series, ix Appendix G: Touch Screen Monitor Setup . . . . . . . . . . . . . . . . . . . . . . . . 112 Step 1 of 3: Connect the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Step 2 of 3: Power on the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Step 3 of 3: Test the Touch Screen Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Access Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • Digimerge DH100 Series, 6 Mouse Control The mouse is the primary control device for the system. To connect a USB mouse: • Connect a USB mouse to the USB port on the front or re ar panel. 1. Left -Button: • While in a split-screen display mode, double-click an individual c hannel to view it in full-screen. Double-click again to return to the split-screen display mode. • While navigating menus, click to open a menu option. 2. Right-B utton: • Dur ing Live View: Right-click anywhere on the screen to open the Quick Menu. • Within syst

  • Digimerge DH100 Series, 34 Using the Main Menu HTTP Setup The HTTP Setup menu allows you to change the system port number and video streaming quality during remote viewing. To configure the HTTP Setup menu: 1. Configure the following: • ENABLE: Select the ENABLE checkbox to customize the system resolution and frame rates during remote viewing. • PORT: Enter the system port number (by default, 80). • No. : Select the channel you wish to configure. • Resolution: Select from QCIF or CIF resolution. NOTE: QCIF: 180x120(NTSC) / 180X144(PAL) NOTE: CIF: 360x240(NTSC) / 360X288(PAL) • Qu ality

  • Digimerge DH100 Series, 1 GETTING STARTED The system comes with the following components: REMOTE CONTROL DH100 SERIES DIGITAL VIDEO RECORDER POWER SUPPLY INSTRUCTION MANUAL, QUICKSTART GUIDE, & SOFTWARE CD MOUSE OCTOPUS CABLE (16-CHANNEL ONLY) HARD DRIVE SIZE, NUMBER OF CHANNELS, AND CAMERA CONFIGURATION MAY VARY BY MODEL. PLEASE REFER TO YOUR PACKAGE FOR SPECIFIC CONTENT DETAILS. CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.

  • Digimerge DH100 Series, vii Starting CMS-DH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Adding a Virtual DVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Creating New Group Folders & Sub folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Configuring General System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Adding Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Recording Video to the Hard Drive . . . . . . . . . . . . . . . .

  • Digimerge DH100 Series, 22 Setting up Sequencing SETTING UP SEQUENCING Sequencing allows you to view channels in a rotating interval. To enable sequence view: • Press the AUT O button on the remote control. The icon appears to indicate sequence view. The DVR begins sequence view in full screen view.   OR • Right-click in the main viewing window, and click Display Setup>Auto Seq( ). To configure the dwell time between each sequence: 1. Right-click in the main viewing window and click Main Menu ( ). 2. Click Sys tem Setup ( )>Display Setup. 3. Beside Auto-Seq Interval (Seconds), enter the desired dwell time in seconds. 4. Right-click

  • Digimerge DH100 Series, 109 Appendix D: Setting Up DDNS Service You will need this information for remote access to your system. Record your information below: How Do I Enable DDNS On My System? Once you have registered for free DDNS service, use the information in the confirmation email to configure DDNS settings on your system. To enable DDNS on your system: 1. Open the MAIN MENU and click NETWORK SETUP>DDNS SETUP. 2. Select the En able DDNS checkbox. 3. Under DDNS Server, select digimer ge.net. 4. Enter the following: • D OMAIN NAME, enter only the first portion of your DDNS domain from the confirmation email. For example, If your domain name is http://toms

  • Digimerge DH100 Series, 36 Using the Main Menu 3. Right-click and click Yes to save your settings. 4. Click the Rec eiver E-mail button. 5. Enter up to 10 email addresses that will r eceive email notifications from the system. 6. Right-click and click Ye s to save your settings. SYSTEM SETUP Configure the system display setup, date and time, device setup, account setup, and SPOT monitor setup. To adjust the System Setup menu: 1. Configure the following: • DV R Name: Enter the desired DVR name. • Language: Select the DVR language. • Auto Lock: Select from Disable, Key Unlock, Key Lock. You must also select the Password Auth checkbox to enable the Auto Lo

  • Digimerge DH100 Series, 42 Using the Main Menu 7. The system beeps several times, and the screen turns black. This is normal.The screen will remain black for up to 5 minutes, then beep again.   Wait for the system to boot into the main vie wing mode for the firmware upgrade to complete. Once the system boots into live mode, the firmware is updated. NOTE: Do not remove the USB key during the firmware update process. Information • Click the Information button to display network and hard drive information, and firmware version. • You can also access the Information window by pressing the INFO / 10+ button on the remote control (4/8-channel) or by pressing the INFO / 10+ button 2

  • Digimerge DH100 Series, 49 CMS-DH Central Management Software 6. Click the Offline button to connect to the DVR. Double-click the DVR icon to begin viewing. Final Result Once you have added the DVR, you can add multiple DVRs and view them in the tab. To switch DVR, click on the tabs near the top of the window. 1. Click the Offline button 2. Double-click DVR icon Click the tab to switch DVR

  • Digimerge DH100 Series, 82 Remote Viewing on the PC REMOTE VIEWING ON THE PC Along with the CMS-DH remote client software, you can also view your system remotely using Internet Explorer (version 7 or later recommended). Remote viewing through Internet Explorer allows for viewing from up to three simultaneous connections. NOTE: Re mote viewing is only compatible with Internet Explorer.  Mozilla Firefox, Opera, Safari, and other browsers are not supported. Prerequisites • Port 80 (or whichever port your system is using) must be port forwarded to your router. • You must create a DDNS account, and have

  • 10 Using the System Setting the Time To set the date and time: 1. In the main viewing mode, right-click to open the quick menu. 2. Click Setup ( )>Main Menu ( )>Sys tem Setup( ). 3. From the SYSTEM SETUP menu, click Date/Ti me Setup. 4. Click Change Date & Time. 5. In the calendar, select the year, month and dat e. Click the field under "Time"

  • Digimerge DH100 Series, 67 CMS-DH Central Management Software Viewing Video on E-Map Once you have mapped your cameras on E-Map, you can view and search channels from the E-Map directly. To view live video on E-Map: • Double-click on the desired camera icon to open live view. Configuring E-Map Camera Settings To configure E-Map camera settings: 1. Right-click on the camera you wish to c onfigure. 2. Configure the following: • Description Edit: Edit the camera name on the E-Map. • Remote Search: Opens the video search menu. • Live: Opens a live view window of the camera. • Property: View

  • 98 Appendix B: Setting up Remote Viewing APPENDIX B: SETTING UP REMOTE VIEWING Setting up the Remote Viewing Feature requires several steps. Networking skills are required to correctly configure the remote viewing functions. What Do I Need? • DVR System. • A PC with the installed CMS-DH software. • Internet Explorer (PC) or Safari (Mac). • A router (not provided with the system

  • Digimerge DH100 Series, 71 CMS-DH Central Management Software CMS-DH System Log The CMS-DH log allows you to view video events that occurred in the system (i.e motion and camera loss events). Prerequisite: • Ensure the DVR(s) are online and connected to CMS-DH. To view the system log: 1. Click the CMS-DH Log button ( ). 2. Configure the following settings: • Be gin: Enter the Month, Date, Year, and time you wish to begin to search the log. • End: Enter the Month, Date, Year, and time you wish the log search to stop. • Channel: Enter the channel number you wish to search. 3. Click the Sear ch button. • A list of re

  • 25 Setting up Motion Recording Setting up Motion Only Recording Step 1 of 2: Configure the Schedule for 24/7 motion recording: 1. Right-click in the main viewing window and click Ma in Menu>Schedule Setup ( ). 2. Click on the desired schedule t o configure on the left panel. 3. Deselect the "Enable Schedule Record" checkbox. 4. Select the "Enable Schedule M

  • Digimerge DH100 Series, 113 Appendix G: Touch Screen Monitor Setup Step 2 of 3: Power on the Monitor Step 3 of 3: Test the Touch Screen Functions Access Quick Menu • While in viewing mode, press and hold anywhere on the screen for 2 or more seconds. Then remove your finger to open the Quick Menu. Navigate Menus • Tap to select menu options. • To exit menus, press and hold anywhere on the screen for 2 or more seconds. Then remove your finger. If you have made any setting changes, you will be asked if you want to save changes.

  • 116 Appendix J: Replacing the Hard Drive APPENDIX J: REPLACING THE HARD DRIVE The system comes with a pre-installed 3.5" SATA hard drive. You can install up to one 1.5TB hard drive. NOTE: Mak e sure that the system is OFF and the power cable has been disconnected before changing the hard drive. Removing the Hard Drive To remove the hard drive: 1. Power off

  • 29 Using the Main Menu EVENT SETUP Configure Motion or Sensor configuration. The Event Setup window has two menus — Motion Set up and Sensor Setup. Motion Setup The Motion Setup window allows you to configure motion sensitivity, the alarm recording duration, and motion detection area. To configure Motion Setup settings: 1. From the EVENT SETUP window, click the Mo tion Setup window.

  • Digimerge DH100 Series, 63 CMS-DH Central Management Software Taking Screen Captures You can capture screen shots as JPeg or Bitmap images (JPG or BMP). To take a screen capture: 1. During live view, click Cap ture ( ). 2. Click the Sav e As button. Enter the desired picture name, and select the desired save directory, and then click Save. NOTE: T o take a screen capture of a full-screen, double-click the desired channel, then click the Capture button. Viewing File Download Status To check the download status of your video files: 1. Connect to the DVR you wish to check the video status on. 2. Click on To ols>Download>S

  • Digimerge DH100 Series, 31 Using the Main Menu Time comes before the Start Time, create multiple schedules. For example, if you want to record from 17:00 - 9:00 (i.e. 5pm-9am), create one schedule for 17:00 - 24:00 and one for 00:00 - 9:00. • Dates: Sel ect the dates you wish to enable scheduled recording or motion recording (Monday~Sunday). • Holiday: Select to enable holiday recording (holiday recording must be configured). 3. Right-click and click Ye s to save your settings. 4. Repeat the steps above to configure additional schedules as needed. When finished, right-click and click Yes to save changes. NOTE: In the Schedule Setup window, click the recording

  • Digimerge DH100 Series, 26 Display Setup Menu DISPLAY SETUP MENU The Display Setup menu allows you to pause live video, enable Picture in Picture (PIP), Zoom, Auto Sequence, and lock the system. To configure the Display Setup menu: 1. Right-click in the main viewing window, and select Display Setup ( ). 2. Click the following: • Pa use: Pause live video. The system continues to record even if the image is paused. • PIP: Press to open the Picture in Picture mode. • Zoom: Press to Zoom into the channel. • Auto-Seq: Start auto sequence view. • Lock: Lock the system (system password must be enabled). Pause PIP Zoom Auto-Seq Lock

  • Digimerge DH100 Series, 61 CMS-DH Central Management Software Schedule Backup You can schedule regular backup of video to your local hard drive. The schedule can be configured to back up 24 hours of video, or during a specified time only. Prerequisite • 3GB of hard drive space (backup will not function if ther e is less than 3GB). • DVRs must be in offline mode. To configure Schedule Backup settings: 1. Click the DVR that you wish to configure. 2. Click the Device button ( ). 3. Select On t o enable schedule backup. 4. Select Dail y to back up 24 hours of video to your hard drive. Go to step 6. • Select Hour ly to back up every hour of video to your hard drive. Go

  • Digimerge DH100 Series, 75 CMS-DH Central Management Software • Parameter: Select the desired alert sound you want the computer to play. 5. Click Apply and then OK to save your settings. 6. Under Alarm Output, right-click the light bulb icon, and click Contr ol. 7. Click Alarm Output On or Alarm Output Off. This dep ends on your device type (N/O or N/C). 8. Click A pply and then OK to save your settings. When an alarm is triggered, the system will play a sound on the computer. Click here to configure the Command and Parameter settings

  • Digimerge DH100 Series, 18 Search 3. Beside "From", select the checkbox. Click the date field. 4. In the calendar, enter the year, month, dat e, and time you wish to begin searching. 5. Right-click and click Ye s to save your settings. 6. Beside "To", select the checkbox. Click the date field. 7. Repeat step 4. When finished , right-click and click Yes to save your settings. 8. Double-click on the event type you wish to view. The video automatically plays. From checkbox Date field Month Year Date Time Click +/- to scroll through the pages of events Double-click the event to begin playback.

  • Digimerge DH100 Series, 43 CMS-DH CENTRAL MANAGEMENT SOFTWARE CMS-DH is a central management software that allows you to view and manage up to 300 DH100 series DVRs. System Requirements Your system must meet the system requirements below: Prerequisites • Port forward port 80 (default port) to the router that the DVR is connected to. • Create a DDNS account. • Enable DDNS in the DVR. • Enter the DDNS information into the DVR. • DVR must have access to the Internet or Local Area Network (LAN). Minimum system requirements • Windows XP SP 1 • Pentium 4, 2.4Ghz • 512 MB RAM • 64 MB AGP video card • 1024 x 768 monitor resolution • Direct X 7.0 • 100MB

  • Digimerge DH100 Series, 14 Recording Motion Motion Recording allows the DVR to mark video as an event. This allows you to search for motion recordings in the search menu. For example, if you enable motion recording, during Event Search, you can search for only the events that contain movement. When motion is detected by the camera, the motion icon appears. Alarm When an alarm is triggered, the system will continue to record, but can apply unique recording parameters that you can set in the Event menu (Main Menu>Event Setup>Sensor Setup). Video Loss If a camera

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Samsung WA52J8060A Operation & user’s manual samsung/wa52j8060a-7P9.pdf 04 Jan 2023 74
2 B.C. Rich Bich 10 Supplementary manual b-c-rich/bich-10-3RE.pdf 22 Jul 2023 2 4.84 Mb
3 Optoma ES526 Service manual optoma/es526-GAT.pdf 05 Jul 2023 79
4 Pitney Bowes DM450c Replacement instructions pitney-bowes/dm450c-9W5.pdf 23 Feb 2023 2
5 Lexmark X7500 Operation & user’s manual lexmark/x7500-GZP.pdf 26 Apr 2023 53
6 Philips AZ2605 Brugsanvisning philips/az2605-F17.pdf 16 Feb 2024 16 0.51 Mb

Similar Resources:

  • Mytrex

    MXD-LTE

    (19 pages)
    MXD-LTE User Manual REV: 0 March 23, 2020 Manufactured by Mytrex, Inc. 10321 South Beckstead Lane South Jordan, UT 84095 (801) 571-4121, Fax (801) 571-4606 Toll Free (800) 688-9576, Fax (877) 571-4606 …
  • Harbor Freight Tools

    69643

    (12 pages)
    Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.Copyright© 2012 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this man …
  • Bosch

    LTC 9441 Series

    (96 pages)
    LTC 9418 & LTC 9420 Series LTC 9440& LTC 9441 Series EN Instruction Manual Weatherproof Outdoor Pan/Tilts NL Instructiehandleiding Weerbestendige zwenk/kip-unit voor buiten FR Manuel d’utilisation Socles à balayage horizontal/vertical étanches pour applications d'extérieur IT Manuale utente Unit …
  • Kerbl

    322080

    (44 pages)
    1322080 (1088)DE Anhängerkamera-Set 2,4 GHz – BedienungsanweisungFR Kit de caméra de van 2,4 GHz avec écran de 2,5‘‘ – Guide d’utilisationEN Trailer camera set, 2.4GHz with 2.5” monitor – User GuideIT Set videocamera da rimorchio 2,4 GHz con monitor da 2,5 – Istruzione manualeNL Aanhangwagencameraset 2,4 Ghz met 2,5“ mo …
  • American Panel

    IC

    (16 pages)
    Operations ManualIC - Intelligent Control and Alarm SystemPlease read this manual before installing or operation of this equipment.This manual is updated as new information and models are released. Visit our website for the latest manual.IC_OEM 12/215800 SE 78th St. Ocala, FL 34472 • 352.245.7055 • [email protected], Dependable Walk-Ins …
  • Texecom

    Veritas Reflex

    (2 pages)
    ✓ Design: Noise reduction circuits with maximum ground plane.RF Immunity: No false alarms from 80MHz to 1GHz at 50V/m, equivalent to a 700W uniform transmitter at 3m (10ft). Complies with BS EN 61000-4-3 : 1997.Electrostatic Discharge: No false alarm up to 8kV. Complies with BS EN 61000-4-2 : 1995.Fast Transient Immunity: No false alarm up to ±1k …

Comments, Questions and Opinions: