Digimerge DH100 Series Instruction Manual

Text of Digimerge DH100 Series User Guide:

• Digimerge DH100 Series, 112 Appendix E: Connecting PTZ Cameras APPENDIX E: CONNECTING PTZ CAMERAS You can connect RS-422/485 PTZ cameras (not included) to the PTZ Control Block on the rear panel of the system. To install a PTZ Camera: 1. Connect the Transmit Cable to the RS-485 TX (+) port of the PTZ block on the rear panel. 2. Connect the Receive Cable to the RS- 485 TX (-) port of the PTZ block on the rear panel. 3. Connect the video cable to a BNC port (usually channel 1). 4. Open the Main Menu and select PTZ. 5. Click the number tab to select the channel that the PT

• Digimerge DH100 Series, 78 CMS-DH Central Management Software 3. In the Events drop-down menu, select the type of event that will trigger CMS-DH to produce a pop-up window when an event is detected. 4. In the Device drop-down menu, select the name of your DVR. 5. Under the Sub Type drop-down menu, select Camera. 6. Under Sub No., select the channel number you wish to appear as a pop-up alert. 7. Under Command, select Live Video. 8. Click Apply and then click OK to save your settings. Result When the camera detects motion, a pop-up window appea

• Digimerge DH100 Series, 44 CMS-DH Central Management Software Installing CMS-DH To install CMS-DH: 1. Insert the software CD, and click the Install CSM-DH button. Follow the directions to download the CMS-DH software from Digimerge’s website. NOTE: You can also go to www.digimerge.com, and search under the DH100’s product page for the CMS-DH software. 2. Double-click the CMS-DH setup file. NOTE: You may receive installation warnings.This is normal. Accept the security warnings to continue. 3. Follow the on-screen instructions to install the software. 4. Click Yes to restart the computer when prompted.

• Digimerge DH100 Series, 92 Mobile Connectivity Blackberry "Connection h.264" is Blackberry app that allows you to remotely view your DVR. NOTE: Connection h.264 is capable of viewing only. Compatible Devices • Blackberry 9000, 9700, 9800 • Blackberry Desktop Manager 4.6 and above • Digimerge DH100 Series DVR Prerequisites • Port 80 (or whichever port your system is using) must be port forwarded to your router • You must create a DDNS account, and have the DDNS settings configured in your DVR • The DVR must have internet access • You must have a Digimerge DDNS address to log in remotely • Dow

• 95 Mobile Connectivity 3. Enter the following: • NAME: Enter the desired DVR name. • IP: Enter the DVR’s local IP address or DDNS address (i.e. tomsmith.digimergeddns.net) • PORT: Enter the DVR’s port number (by default, port 80). • ACCOUNT: Enter your DVR’s user name (by default, admin). • PASSWORD: Enter your DVR’s password (by default, 000000). 4

• 30 Using the Main Menu SCHEDULE SETUP Configure recording schedule, and recording types. To configure the Schedule Setup settings: 1. Click on the schedule on the left that you wish to configure. NOTE: You can configure up to 50 schedule types. 2. Configure the following: • Enable Schedule Record: Select the checkbox to enable scheduled recording. • Enable Schedule Motion De

• Digimerge DH100 Series, vii TABLE OF CONTENTS Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• Digimerge DH100 Series, 61 CMS-DH Central Management Software Schedule Backup You can schedule regular backup of video to your local hard drive. The schedule can be configured to back up 24 hours of video, or during a specified time only. Prerequisite • 3GB of hard drive space (backup will not function if there is less than 3GB) • DVRs must be in offline mode To configure Schedule Backup settings: 1. Click the DVR that you wish to configure. 2. Click the Device button ( ). 3. Select On to enable schedule backup. 4. Select

• Digimerge DH100 Series, 50 Adding a Virtual DVR A virtual DVR allows you to add video sources from multiple DVRs, into one main window. Prerequisites • Ensure the DVRs are online, and connected to CMS-DH. To add a Virtual DVR: 1. Click the New VDVR button ( ). 1 DVR # 1 DVR # 2 2 3 4 5 6 7 8 9 A B C D E F G H I Example A 3 B 6 D 4 8 G C Virtual DVR Video feed from DVR #1 Video feed from DVR #2 In the example below, multiple video sources from two DVRs are grouped into the Virtual DVR. (Combined video feeds from DVR #1 & DVR #2)

• Digimerge DH100 Series, 33 Using the Main Menu NETWORK SETUP Configure network, email notification, and DDNS options. Configuring Network Type You can set the system to be in DHCP mode (the router assigns the DVR IP), or in Static IP mode (the DVR IP is fixed). To change the network type: 1. Click the DHCP, or STATIC IP checkbox. • If you select DHCP, the router assigns your DVR an IP address. • If you select STATIC IP, beside the IP Address, Subnet Mask, and Gateway fields, enter the appropriate IP numbers. 2. Right-click and click Yes to save your se

• Digimerge DH100 Series, 103 Appendix C: Digimerge Auto Port Forwarding Wizard 5. Click the Next button and then click Finish to complete the software installation. 6. Double-click the Digimerge Auto Port Forwarding shortcut ( )from your desktop to start the program. Obtaining Your Router Model Number and Version On most routers, the model and version number can be found underneath the router, printed on a sticker. Finish button • WGR614 refers to the model number • v9 refers to the version number Example

• Digimerge DH100 Series, 106 Appendix C: Digimerge Auto Port Forwarding Wizard Step 3: Update the router settings 1. Click the Update Router button. • You will see your router window open. The Auto Port Forwarding Wizard automatically populates your router with the relevant information. This will take a few moments. 2. Close the update window when the update finishes. Step 4: Test your connection 1. Click the Test Your Connection button. • Your system’s default browser opens and connects to your Digimerge device. NOTE: Ensure that Internet Explorer is your system’s default internet browser. NOTE: A window

• 23 Setting up Motion Recording Step 2: Enable Motion Recording 1. From the main menu, click Event Setup>Motion Setup. 2. Click the channel number you wish to enable motion. 3. Select the Enable checkbox. 4. OPTIONAL: Select the Motion Popup checkbox if you want the channel that detects motion to display in full-screen mode. 5. Right-click and click Yes to save your settin

• Digimerge DH100 Series, 108 Appendix C: Digimerge Auto Port Forwarding Wizard Configuring a DMZ host connection • Connect to "Router 1" on your network (referred to as "Possible 1st Router" in the Auto Port Forwarding Wizard). Obtain the IP address of Router 1. Usually this can be found in the "Status" section of your router menu. The IP should begin with "192.168...."This IP address is your DMZ IP. • Enter the IP address obtained from Router 1 into the DMZ section of Router 2. • Once you have configured Router 2 with a DMZ connection

• Digimerge DH100 Series, 87 Mobile Connectivity Controlling PTZ cameras To control connected PTZ cameras: 1. Select the channel that has the PTZ camera connected. 2. Tap the PTZ button ( ). 3. Perform one of the following: • Pan and tilt: Drag your finger on the main viewing window to pan and tilt the camera. • Zoom: Pinch your finger on the screen to zoom in or out. Changing views during normal viewing During live view: • Change channels: Swipe your finger across the screen. • Quad view: Pinch your finger on the screen. Drag your finger to pan and tilt camera Close ir

• Digimerge DH100 Series, 100 Appendix B: Setting up Remote Viewing How Do I Find My IP and MAC addresses? The IP and MAC address of your system are necessary for DDNS setup. DDNS allows you to view and control your system from a remote location. To find your IP and MAC address using the remote control: • Press the 10+ button. To find your IP and MAC address using the mouse: 1. Right-click in the main viewing window Main Menu>Utilities>Information Finding Your External IP Address If you wish to find your external IP address

• Digimerge DH100 Series, 38 Using the Main Menu Device Setup The device setup menu allows you to adjust system Buzzer, relay, and video output settings. To adjust the mouse acceleration speed: 1. Beside Mouse Speed, click -/+ to adjust the mouse acceleration speed. 2. Right-click and click Yes to save your settings. Buzzer & Relay Setup The Buzzer & Relay Setup menu allows you to configure the type of events that will trigger a relay (alarm block) to activate, or the system buzzer to beep, when an event occurs. To adjust the Buzzer & Relay Setup settings: 1. Configure the following: • Key Tone: Sele

• Digimerge DH100 Series, 59 2. To search for the video: a. Click to select the desired month. b. Select the date of the video. c. Select the hour. d. Select the minute 3. Click the Play button to begin watching the video. Saving Video Files You can save the proprietary video files to your local hard drive from the Search menu. The video file ends in a .cms extension, and requires CMS-DH for playback. To save video files from the search menu: 1. Select the month, date, and time of the video. 2. Click the Save As button. 3. Select the desired save directory, and click OK to save the file. A B C D P

• 26 Using the Main Menu USING THE MAIN MENU To open the Main Menu: • Using the Remote Control: Press the MENU button. • Using the Mouse: Right-click in the main viewing window>Main Menu (). 1. Record Setup: Configure recording frame rate, quality, and hard drive recording mode. 2. Event Setup: Configure Motion or Sensor configuration. 3. Scheduled Setup: Configu

• Digimerge DH100 Series, 62 5. In the Minute drop-down menu, enter how many minutes the system should wait before recording. For example, if you enter 10 minutes, the system will backup video footage from 8:10 a.m to 9:10 a.m. 6. In the Hour drop-down menu, enter the time you wish to begin backup. For example, if you enter 5:00pm (05:00hr), the backup will start at 5:00pm, and end at 4:49am (the next day). Enter the hourly time in 24-hour format. 7. Select the channels that you wish to enable schedule backup. 8. Click Apply and then click OK to save your settings. Select channels you wish to back up

• Digimerge DH100 Series, 113 Appendix F: Connecting An External Monitor APPENDIX F: CONNECTING AN EXTERNAL MONITOR Use the Video port (BNC) on the rear panel of the system to use the Monitor Out function. Monitor Out displays the exact on-screen display of the system. NOTE: A BNC-to-RCA adapter (not included) is required to connect a monitor with RCA inputs. To configure the SPOT OUT Menu: 1. From the Main menu, click SYSTEM SETUP>Spot Setup. DVR* Monitor (not included)

• Digimerge DH100 Series, 6 Mouse Control The mouse is the primary control device for the system. To connect a USB mouse: • Connect a USB mouse to the USB port on the front or rear panel. 1. Left-Button: • While in a split-screen display mode, double-click an individual channel to view it in full-screen. Double-click again to return to the split-screen display mode. • While navigating menus, click to open a menu option. 2. Right-Button: • During Live View: Right-click anywhere on the screen to open the Quick Menu. • Within system menus: Right-click to exit menus. 3. Scroll-Wheel: Not

• 16 Search SEARCH Search for recorded video data on the system using the Time Search menu. To open the Time search menu: 1. Press the TIME SEARCH button on the remote control OR • Right-click in the main viewing window, and click Search Setup (). 2. Click on one of the following: Event Search, Time Search or File Search. Event Search Event search allows you to search

• Digimerge DH100 Series, 69 CMS-DH Central Management Software Viewing DVR Health To view the status of the DVR: 1. Select the DVR on the menu tree on the left. 2. Click the Health button ( ). Closing windows To close open tabs: • Click the Close button, and select Close or Close All. Locking Windows • To prevent the tab from being dragged, click the Tab Unlock button.

• Digimerge DH100 Series, 118 Appendix I: Replacing the Hard Drive Replacing the Hard Drive To replace the hard disk: 1. Place the new hard drive in the housing. Carefully flip the DVR over, with your hand clasping the hard drive. Secure the hard drive with the 4 silver screws from the bottom of the DVR. 2. Connect the SATA power and data cables in the hard drive. 3. Replace the system cover. 4. Replace the screws on the side and rear panel. DVR Front SATA Power cable SATA data cable

• Digimerge DH100 Series, 54 Adding Users You can add multiple users to CMS-DH, specifying the DVR menus that each user is allowed to access. To add a new user: 1. Log in to CMS-DH. 2. Click File>CMS-DH Account. 3. Enter the following: • ID: Enter the desired user name. • Password: Enter the desired user password. • Confirm Password: Re-enter the user password. 4. Under the DVR list, click the checkbox to select the DVR the user will have access to. 5. Under ’Uses’ click the checkbox to select the type of menus the user will have access to. 6. Click Add and then click OK to save your settings. To remove a user: 1. Log in to CMS-DH

More Instructions:

	Digimerge DH100 Series Setup manual 19-12-2023 2	DOWNLOAD
	Digimerge DH100 Series Quick setup manual 15-04-2024 2	DOWNLOAD
	Digimerge DH100 Series Instruction manual 01-08-2022 140	DOWNLOAD

Related Products and Documents (Security System):

Comparable Devices:

Similar Resources:

• Check Point 5070 (4 pages) The NGX platform delivers a unified security architecture for Check Point. Network SecurityCheck Point network security solutions are the market- leading choice for securing the network infrastructure.KEY BENEFITSn Delivers gateway throughput up to 14 Gbps and intrusion prevention throughput up to 6.1 Gbpsn Streamlines deployment of enterprise security wit …

• CrimeStopper EZ-30.DP (16 pages) EZ-30DP/31DP/33DP/34DP 1-WAY SYSTEM DP SERIES (Data Port) OPERATING INSTRUCTIONS **IMPORTANT NOTES:- FOR EZ-30DP MODEL ONLY** EZ-30DP Model is an add-on/expansion unit, without remotes or an antenna that must be controlled by an existing alarm or keyless entry system. The “Infinity Run” feature is not available on an EZ-30DP system. Most of the remot …

• Saniflo SANI12661 (12 pages) SANIALARM INTERLOCKOWNER’S OPERATION MANUALMODEL: SANI12661DOC: SANI12661VER 1.0AUSTRALIA/NEW ZEALANDSANIFLO (Australia)Unit 10, 25 Gibbes Street Chatswood, NSW 2067 Tel: 1300 554 779 (AU) Tel: 0800 107 264 (NZ) …

• INSTEON 2420M (2 pages) BEST LOCATIONS Select a detector location that will provide the coverage required while keeping in mind the following potential problems: 1. Reflective surfaces - Do not aim the detector at reflective surfaces such as mirrors or windows as this may distort the coverage pattern or reflect sunlight directly o …

• Mircom FX-350 Series (48 pages) Canada25 Interchange WayVaughan, ON L4K 5W3Tel: 905-660-4655 Fax: 905-660-4113© Mircom 2006Printed in CanadaSubject to change without prior noticeU.S.A.60 Industrial ParkwayCheektowaga, New York 14227Tel: 1-888-660-4655 Fax: 1-888-660-4113www.mircom.comFX-350/351 SERIES Analog/Addressable Fire Alarm PanelLT- 1040 Rev 1March 2008 Programming ManualAdvanced …

• Federal Signal Corporation Global Series (96 pages) 25500187 en Rev. A0 1015Printed in U.S.A.Installation and Maintenance InstructionsGlobal Series Model G-SND SounderFor Use in Hazardous LocationsPara ver este manual em Português, acesse www.federalsignal-indust.com.要查看本手册的简体中文版，请访问 www.federalsignal-indust.com。 Для просмотра руководства на рус …

Comments, Questions and Opinions: