Manualios.com

Digisol DG-WN1150N Operation & User’s Manual

Digisol DG-WN1150N Manual Online:

4.1, 2306 votes
Digisol DG-WN1150N User Manual
Digisol DG-WN1150N User Guide
Digisol DG-WN1150N Online Manual

Text of Digisol DG-WN1150N User Guide:

  • Digisol DG-WN1150N, DG-WN1150N User Manual 2-2-1-2 Connect to an Access Point If the wireless Access Point you wish to connect is found, you can establish connection with it by clicking ‘Connect’ button. Instructions will be given as follow: 27 1. Click the wireless Access Point or network device you wish to connect, it will be highlighted, then click ‘Connect’. If the Access Point you selected does not use encryption, you’ll be connected to this wireless Access Point within one minute. If the Access Point you selected uses encr

  • Digisol DG-WN1150N, DG-WN1150N User Manual 2 COPYRIGHT Copyright ©2010 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any softwa

  • Digisol DG-WN1150N, DG-WN1150N User Manual 2-3-2 Edit an existing profile If you have added a profile before, and you wish to change the content of the profile, you can use this function. Please select a profile from the list first, then click ‘Edit’ button. You’ll be provided with the contents of selected profile, and you can edit them. Click ‘OK’ to save changes, or click ‘Cancel’ to discard changes. 45

  • Digisol DG-WN1150N, DG-WN1150N User Manual 2. If the wireless Access Point does not have SSID (i.e the SSID broadcast is disabled), you’ll be prompted to input it now. Please ask the owner of wireless Access Point for the exact SSID and input it here, then click ‘OK’ when ready. If the SSID you provided here is wrong, you’ll not be able to connect to this Access Point. 3. If the wireless Access Point uses encryption, you will be prompted to input its WEP key or WPA preshared key. 28

  • Digisol DG-WN1150N, DG-WN1150N User Manual 2-7-2 WPS Setup - PIN If the wireless Access Point you wish to connect supports PIN, please follow the following instructions to establish connection to it: 1. Right-click the Digisol configuration utility icon located at lower-right corner of computer desktop and then click ‘Launch Config Utility’. 58 2. Click ‘WPS Configuration’ m enu, and the following settings will appear. 3. The PIN code of your wireless network card is an eight-digit number located at the upper-right position of configuration utility. Remember it, and input the number to your wire

  • DG-WN1150N User Manual 80 4. What is Ad-hoc? An Ad-hoc integrated wireless LAN is a group of computers, each has a Wireless LAN card, Connected as an independent wireless LAN. Ad hoc wireless LAN is applicable at a departmental scale for a branch or SOHO operation. 5. What is Infrastructure? An integrated wireless and wired LAN

  • Digisol DG-WN1150N, DG-WN1150N User Manual CCX: If this Access Point supports CCX (Cisco Compatible eXtension), related information will be displayed here. 802.11n: If this Access Point complies with 802.11n draft, related information will be displayed here. Here are descriptions of every setup item in setup area: Item Name Description Sorted by >> You can decide how to sort all listed Access Point by ‘SSID’, ‘Channel’, or ‘Signal’ (signal strength). Show dBm Check this box to show the signal strength of Access

  • DG-WN1150N User Manual 2-5 View Network Statistics The configuration utility provides information about network statistics and link status. If you want to know how your wireless network card works, you can use these functions to get detailed information about the wireless connection you’re using. Please follow the following instr

  • Digisol DG-WN1150N, DG-WN1150N User Manual 2-2-1-1 Scan for Other Wireless Devices There are two kinds of wireless connection mode: Infrastructure and Ad-Hoc. Infrastructure mode is used by wireless Access Points, which is able to establish wireless connection for you and other wireless / wired network clients. Ad-Hoc mode is also know as ‘point-to-point’ mode, and in this mode, wireless devices such as computer or PDA will not be capable to establish wireless connection with more than one wireless device, and is suitable for establishing a one-to-one wireless connection between two wireless devices. Before you can connect to any wireless Access Point

  • Digisol DG-WN1150N, DG-WN1150N User Manual 33 reception), you can select a lower output power to save energy; for a distant Access Point, you can select a higher output power. It’s suggested to select ‘Auto’ to let setup utility decide the best output power for you. Preamble Select the preamble for Ad hoc mode here. Available options are ‘Auto’ and ‘Long’. It’s suggested to select ‘Auto’ to let setup utility decide the preamble for you. Channel You can select the radio c

  • Digisol DG-WN1150N, DG-WN1150N User Manual CHAPTER 2: Driver Installation and Configuration 2-1 Network Card Installation Please follow the following instructions to install your new wireless network card: 1. SWITCH THE COMPUTER OFF, remove the cover and insert the wireless network card into an empty PCI slot of your computer and then replace the cover. 14

  • Digisol DG-WN1150N, DG-WN1150N User Manual 6. You can choose the configuration tool used to configure the wireless network card here. It’s recommended to select ‘DIGISOL Configuration Tool’, which provides full access to all functions of this wireless network card. If you prefer to use the wireless configuration tool provided by Windows XP, please select ‘Microsoft Zero Configuration Tool’ then click ‘Next’. 7. Now you’ll see the following message, please click ‘Install’ to start

  • Digisol DG-WN1150N, DG-WN1150N User Manual 2-11 On-line Help If you need to know the directions of how to use specific function in the utility, please click ‘Help’ button. On-line help documents will be presented in Windows help format. Click this button to view on-line help documents. 63

  • Digisol DG-WN1150N, DG-WN1150N User Manual 3 FCC warning: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limitations are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to ra

  • Digisol DG-WN1150N, DG-WN1150N User Manual 83 18. What is WPS? WPS stands for Wi-Fi Protected Setup. It provides a simple way to establish unencrypted or encrypted connections between wireless clients and Access Point automatically. User can press a software or hardware button to activate WPS function, and WPS-compatible wireless clients and Access Point will establish connection by themselves. There are two types of WPS: PBC (Push-Button Configuration) and PIN code. This product comes with Life time warranty. For further deta

  • Digisol DG-WN1150N, DG-WN1150N User Manual 4. Before you start to establish the wireless connection by using WPS, you can click ‘Rescan’ button to search for WPS-enabled Access Points near you again, to make sure the WPS function of your Access Point is activated. All Access Points with WPS function enabled will be displayed here. Please make sure the Access Point you wish to connect is displayed. If not, please click ‘Rescan’ few more times. You can also click

  • Digisol DG-WN1150N, DG-WN1150N User Manual 3-2 Security Setting This wireless card supports wireless encryption in AP mode, which will encrypt the data being transferred over the air to enhance data security level. It’s recommended to enable data encryption unless you wish to open your computer (and its internet connection) to the public. When you click ‘Security Setting’ in the utility, the following window will appear: Here are descriptions of every setup item: Item Name Description Authentication Type Please select a wireless authentication type

  • DG-WN1150N User Manual 2-3-4 Activate a profile When you want to connect to a specific wireless device in the profile list, you can select it and click ‘Activate’ button, to establish connection with it. When you selected a profile and click ‘Activate’ button to activate the profile, a icon will be displayed in front of the p

  • Digisol DG-WN1150N, DG-WN1150N User Manual 76 CHAPTER 4: Appendix 4-1 Specification Standards: IEEE 802.11b/g/n (1T1R) Interface: 32Bit PCI Frequency Band: 2.4000 ~ 2.4835GHz Data Rate: 11b: 1/2/5.5/11Mbps 11g: 6/9/12/24/36/48/54Mbps 11n (20MHz): MCS0-7 (up to 72Mbps) 11n (40MHz): MCS0-7 (up to 150Mbps) Securities: WEP 64/128-bit, WPA, WPA2 Cisco CCX Support Antenna: One 3dBi External Dipole Antenna (1T1R) Drivers: Windows 2000/XP/Vista/7 LEDs: Link, Tx/Rx Temperature: Operating 32~104°F (0 ~ 40°C) Storage -20 ~ 65°C Humidity: Operating 10-90% (Non Condensing) Storage Max. 95% (Non Condensi

  • Digisol DG-WN1150N, DG-WN1150N User Manual If you want to switch the wireless card back to station mode (become a client of other wireless Access Points), click ‘Switch to Station Mode’. A configuration window will appear after you switch the operation mode to ‘AP’. 65

  • Digisol DG-WN1150N, DG-WN1150N User Manual 4. Click ‘Network Connections’. 5. Right-click ‘Wireless Network Connection’ (it may have a number as suffix if you have more than one wireless network card, please make sure you right-click the ‘Digisol 802.11n Wireless LAN Card’), then select ‘View Available Wireless Networks’. 40

  • DG-WN1150N User Manual 2-6 WMM Setting This wireless network card provides WMM (Wi-Fi Multimedia) function, which can improve the performance of certain network applications, like audio/video streaming, network telephony (VoIP), and others. When you enable the WMM function of this network card, you can define the priority of different kinds of data, to give

Related Products and Documents (PCI Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 ProForm 10.8x Bike Manual  proform/10-8x-bike-JJA.pdf 19 Aug 2023 24
2 sunjoe MJ500M Operator's manual sunjoe/mj500m-X2D.pdf 24 Oct 2022 6
3 SICK FLOWSIC100 Flare Operating instructions manual sick/flowsic100-flare-386.pdf 20 Aug 2023 184
4 Hama RX 2 Operating instruction hama/rx-2-IBP.pdf 10 Nov 2023 44 0.27 Mb
5 Trade-wind P32303RC Installation instructions & use & care manual trade-wind/p32303rc-4YV.pdf 25 Feb 2024 9
6 Casio PV-100 Operation & user’s manual casio/pv-100-X8I.pdf 20 Dec 2023 10 0.03 Mb

Similar Resources:

  • YASKAWA

    DX200

    (26 pages)
    MANUAL NO. R-AN-A307Part Number: 165841-1CDRevision: 25DX200NOTES FOR SAFE OPERATIONUpon receipt of the product and prior to initial operation, read these instructions thoroughly, and retain for future reference.MOTOMAN INSTRUCTIONSDX200 NOTES FOR SAFE OPERATIONDX200 INSTRUCTIONSDX200 OPERATOR’S MANUAL (for each purpose)DX200 MAINTENANCE MANUALThe operator …
  • Vantec

    UGT-ST320R

    (20 pages)
    4-Port SATA 150 PCI Combo Host Card w/RAID User Manual Model: UGT-ST320R All brand names and trademarks are properties of their respective owners.www.vantecusa.com …
  • Advantech

    VEGA-340

    (2 pages)
    VEGA-340 Startup Manual 1Before you start installing your card, please make sure that the following items have been shipped:• 1 x VEGA-340 card with heat sink and half height PCIe bracket installed• 1 x Full height PCIe bracket• 1 x Startup manual• 1 x Edge AI suite download card• 1 x China RoHSNote: Regarding OpenVINO, you …
  • TerraTec

    Mystify 9200 SE

    (2 pages)
    GraphicsSystem Mystify 9200 SE – 01/2004 – Page 1 / 2 All company names and trademarks are registered trademarks and brand names of their respective owners. © TerraTec Electronic GmbH The launch pad for the ATI 9 Series With the Mystify 9200 SE from TerraTec you can profit from the world class technology of the superb 9 Series chipset from ATI …
  • MGE UPS Systems

    minislot 66244

    (67 pages)
    www.mgeups.comNetworkManagement CardsUser ManualTHE UNINTERRUPTIBLE POWER PROVIDERNetwork Management Card – User Manual 34003676EN/BB Page 1/76Minislot 66244Transverse 66074Environment Sensor 66846 …
  • Decision-Computer

    8255-P2

    (8 pages)
    8255-I/O ManualPCI - 8255-P248 Digitale I/O 8255 - 3 Timer/Counter 8254Item-No.: 8255-P2Taiwan Product Code: APCI8255/CE DECISION-COMPUTER Jürgen Merz e.K.Lengericher Str. 2149536 LienenTelefon +49 (0)5483-77002Telefax +49 (0)5483-77003http://www.decision-computer.de …

Comments, Questions and Opinions: