Manualios.com

Amped Wireless SR150 Operation & User’s Manual

Amped Wireless SR150 Manual Online:

3.25, 1973 votes
Amped Wireless SR150 User Manual
Amped Wireless SR150 User Guide
Amped Wireless SR150 Online Manual

Text of Amped Wireless SR150 User Guide:

  • Amped Wireless SR150, SR150 USERS GUIDE 19 Wireless Settings: Security Wireless security allows you to change the type of wireless security settings for your Extended Network or your Home Network. Note: If you adjust the security in your Home Network and it is incorrect, you will no longer have a successful connection to your Home Network. Using the drop down menu, you can select which network you wish to configure and adjust the security settings below. If you are using the Multiple AP/SSID feature, you will be able to adjust the security settings for your additional SSI

  • Amped Wireless SR150, Amped Wireless A Division of Newo Corporation Copyright © 2011 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation. 888-573-8820 [email protected] www.ampedwireless.com tech support e-mail web

  • SR150 USERS GUIDE 28 MANAGEMENT FEATURES The Management features on the Smart Repeater allow you to view the status of your Home Network and Extended Network. The Repeater Status page provides full information regarding each connection (Home and Extended), including the IP address, current connection SSID and current state. This page is often used to check the health of yo

  • Amped Wireless SR150, SR150 USERS GUIDE 46 warranty claims. You are responsible for properly packaging and shipping the product at your cost and risk to Amped Wireless. The bearer of cost related to shipping repaired or replaced product back to the purchaser will be at the sole discretion of Amped Wireless and determined based on the details of each RMA case. Customers outside of the United States of America are responsible for all shipping and handling costs including custom duties, taxes and all other related charges. Technical Support: The Amped Wireless Limited Warranty is not related to the terms, conditions and policies of Amped Wireless�

  • SR150 USERS GUIDE 14 Setup Summary Once the Smart Repeater has rebooted, It will load the Setup Summary page and provide you with the details of your setup. At this time, you may disconnect from the Smart Repeater start a wireless connection. If you have any wired devices that you would like to attach to the Smart Repeater you may do so now as

  • SR150 USERS GUIDE 44 WARRANTY AND REGULATORY INFORMATION The Amped Wireless (A division of Newo Corporation, Inc.) Limited Warranty Warranty Period: The Amped Wireless Limited Warranty is for one (1) year from the date of purchase for new products. Refurbished products carry the Limited Warranty for thirty (30) days after the date of purchase. Guaran

  • Amped Wireless SR150, SR150 USERS GUIDE 27 DHCP Client Range: The range of IP addresses the Smart Repeater’s DHCP server will assign to users and devices connecting to the Smart Repeater. Static DHCP: You may set a static IP address within your DHCP network. The Smart Repeater will track the device via its MAC address and assign it a pre-defined IP address each time the device logs into the network. obtain IP settings from the Home router or to manually enter your IP settings. Domain Name: The Domain Name allows you to change the URL which is used to access the Setup Menu for the Smart Repeater. For example, entering http://setup.ampedwireless.com into your web brow

  • Amped Wireless SR150, SR150 USERS GUIDE 10 Scan for a Wireless Network Click SCAN to begin searching for available wireless networks to repeat. Highlight your network and click Next to continue. If you fail to find any wireless networks, the Smart Repeater may be placed too far from the wireless network that you are trying to repeat. Move your Smart Repeater closer to the wireless network that you are trying to repeat and click SCAN again. The Scan results page will display information regarding the name of the network (SSID), the channel which the wireless network is operating on and the type of network that it is. AP stands for Access Point and is th

  • Amped Wireless SR150, SR150 USERS GUIDE 39 I have a dual-band router and I cannot repeat it. a. Log into the Web Menu for your dual-band wireless router and adjust the wireless settings. Change the wireless band to 2.4GHz single band mode only. Disable the 5GHz wireless band. I cannot find any wireless networks (Home Networks) to repeat. a. The Smart Repeater may be out of range. Move the Smart Repeater closer towards the wireless router and try the Setup Wizard again from the Web Menu. b. The antenna on your Smart Repeater may be loose.

  • Amped Wireless SR150, SR150 USERS GUIDE 12 Repeater Settings (SSID) The default SSID of the Smart Repeater is “Amped_Wireless” This SSID for the Extended Network may be changed by adjusting the name in the field for the Extended Wireless Network ID. This ID will be used by wireless users connecting to the Smart Repeater to identify the Smart Repeater’s Extended Network. It is recommended to use the default settings.

  • Amped Wireless SR150, SR150 USERS GUIDE 17 Extended Network Settings The Extended Network Settings page allows you to adjust settings for your Extended Network. Band: Allows you to setup access under a specific combination of Wi-Fi speed standards. Broadcast SSID: Disabling the broadcasting of your SSID will make it so outside users cannot see your network when they scan for wireless networks. Users must manual enter the SSID to connect. SSID of Extended Network: This is the name of your Extended Network.

  • Amped Wireless SR150, SR150 USERS GUIDE 3 GETTING STARTED Package Contents Check to make sure you have all the contents within your package:  High Power Wireless Smart Repeater  Ethernet Cable  Power Supply  Repeater Stand  CD with Users Guide  One High Gain 3dBi Antenna  Setup Guide

  • Amped Wireless SR150, SR150 USERS GUIDE 16 WIRELESS SETTINGS Home Network Settings The Home Network Settings page allows you to adjust settings for your Home Network connection. These settings are for adjusting the Smart Repeater after you have already gone through the Smart Setup Wizard and wish to adjust your current configurations. Home Network SSID: Manually enter the Identification name of the Home Network you wish to connect to Channel Number: Enter the channel number of the Home Network. If the channel number does not match, a connection will not be established. Channel Width: Wi-Fi operates in two separate channel widths, 20Hz and 40Hz. 2

  • Amped Wireless SR150, SR150 USERS GUIDE 21 Wireless Settings: Advanced Settings It is recommended that only experts in Wi-Fi configuration adjust the advanced wireless settings for the Smart Repeater. These settings allow you to control the details of your wireless network configuration.

  • Amped Wireless SR150, SR150 USERS GUIDE 42 The connection to the Home Network seems slow. File transfers take a long time to transfer. a. You may be too far away from your Home Network. The closer the Smart Repeater is to your Home Network, the better its connection will be. The Smart Repeater must have a strong signal in order to repeat the signal with fast speeds and further range. Move the Smart Repeater closer to your Home Network and try again. b. You may be downloading from the Internet and not w

  • Amped Wireless SR150, SR150 USERS GUIDE 13 Repeater Settings (Security) By default, the Extended Network has security enabled. The WPA security key is “wireless.” Users trying to connect to the Smart Repeater wirelessly will be prompted to enter this key. It is recommended that you use the default settings for the wireless security key. To change the security key, simply retype your new key in the field and click Next. Write your security key down somewhere safe for future reference. No

  • SR150 USERS GUIDE 32 Management: Password Settings By default, the Smart Repeater does not require a password to login to the web menu. If you wish to enable a password to protect unauthorized access to the web menu and Smart Setup Wizard, you may enter one here.

  • Amped Wireless SR150, SR150 USERS GUIDE 29 Management: System Clock Maintain the internal clock for the Smart Repeater by syncing with your computer’s time. Your system clock settings need to be accurate in order for logs and wireless access schedules to work correctly.

  • Amped Wireless SR150, SR150 USERS GUIDE 47 Regulatory Information FCC Statement and Declaration: Amped Wireless declares that this device complies with Part 15 of the FCC Rules and Regulations. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designe

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Acoustic Image Flex Pre Owner's manual acoustic-image/flex-pre-Q9E.pdf 21 Apr 2023 12
2 KitchenAid KECC505KSS02 Parts list kitchenaid/kecc505kss02-995.pdf 18 Sep 2022 3
3 Audiovox CE531MP Operating instructions audiovox/ce531mp-LE5.pdf 07 Jan 2024 2 0.65 Mb
4 CyberHome HGL 1700 Operation manual cyberhome/hgl-1700-N36.pdf 04 Feb 2023 27 4.36 Mb
5 DOSKO M2965020D Owner's manual dosko/m2965020d-KS3.pdf 18 Jun 2023 40
6 Aqua PRO VIP50PRO Operating instructions and replacement parts list aqua-pro/vip50pro-NLW.pdf 20 May 2023 4 0.11 Mb

Similar Resources:

  • Cradlepoint

    CTR35

    (1 pages)
    Z-Fold Format / Double SidedFRONT BACKCTR35-xxxWINDOWS 71) Click the NETWORK CONNECTION icon in the lower right hand corner taskbar.You’ll see a list of available wireless networks2) Click CTR35-xxx3) Click CONNECT4) Enter Default Password5) Click OKCTR35Wireless N Portable RouterQUICK START GUIDE1 )What’s In The BoxSETTING UP THE ROUTER CONN …
  • Cisco

    RV130W

    (5 pages)
    © 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 5 Data Sheet Cisco RV130W Wireless-N Multifunction VPN Router High-Performance, Multifunction Connectivity Product Overview The Cisco RV130W Wireless-N Multifunction VPN Router is an easy-to-use, flexible, high-performance device well suited for …
  • AT&T

    Elevate

    (2 pages)
    External RF antenna connectorPower Button:• Press and hold 2 seconds – power on/off the hotspot• Press and release – wake up the LCD screen• Press – access additional screensLED States:• Flashing blue slowly – powered on • Flashing blue quickly – updating firmwareDefault Audio Alerts:• You have a new SMS message (e.g. a message fr …
  • Billion

    BiPAC 8500/8520

    (171 pages)
    Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Last revision 11-08-08 BiPAC 8500/8520 SHDSL VPN Firewall Bridge/ Router BiPAC 8501/8521 SHDSL.bis (VPN) Firewall Bridge/Router User Manual …
  • NetComm Wireless

    NF18ACV

    (3 pages)
    Change Administration Password Guide NF18ACV FAQs NF18ACV FAQs 1 of 3 © NetComm Wireless 2017 Password Overview Changing the default password allows you to prevent unauthorized access to the administration page of your NF18ACV. You can change both the default password and the default username. Remember your username and password Once the username and pa …
  • Cisco

    1100 Series

    (12 pages)
    Install and Upgrade Internal Modules and FieldReplaceable UnitsThe Cisco 1100 Series Integrated Services Routers have internal modules and field-replaceable units (FRUs)that can be quickly and easily removed and replaced without having to send the entire router for repair.This section describes how to install and upgrade the internal modules and FRUs in the …

Comments, Questions and Opinions: