Hitachi CM 5SB Technical Data And Service Manual
|
Hitachi CM 5SB, Cutting or scribing concrete Cutting or scribing tile Cutting or scribing stone Cutting or scribing roof tile [ NEW FEATURES ] Class-top dust collecting performance High stability with wider base (for the Models CM 9SR/CM 9UBY) Pocket guide (for the Models CM 9SR/CM 9UBY) *Other than the above features, the Models CM 5SB, CM 9SR and CM 9UBY have the features (selling points) common to the base Models G 13SB3, G 23SR and G 23UBY respectively. The new cutters Models CM 5SB, CM 9SR and CM 9UBY are developed based on the disc grinders Models
Hitachi CM 5SB, REMARK: For more information about HANDLING INSTRUCTIONS, visit our website at: http://www.hitachi-koki.com/manual_view_export/ Throughout this TECHNICAL DATA AND SERVICE MANUAL, a symbol(s) is(are) used in the place of company name(s) and model name(s) of our competitor(s). The symbol(s) utilized here is(are) as follows: Competitors Symbols Utilized Company Name Model Name CHILTI DC125-S DC 230-S/EX
Hitachi CM 5SB, CONTENTS Page SELLING POINT DESCRIPTIONS ----------------------------------------------------------------------------------------- 1 SPECIFICATIONS -------------------------------------------------------------------------------------------------------------- 2 1. Specifications --------------------------------------------------------------------------------------------------------------------------------- 2 COMPARISONS WITH SIMILAR PRODUCTS-------------------------------------------------------------------------- 3 1. Specifications comparisons ---------------------------------------------------------------------------------------------------------- 3 PRECAUTIONS IN SALES PROMOTION---
Hitachi CM 5SB, 1 W Base Roller Other than the following, the Models CM 5SB, CM 9SR and CM 9UBY have the features (selling points) common to the base Models G 13SB3, G 23SR and G 23UBY respectively. Refer to each TECHNICAL DATA AND SERVICE MANUAL of the base models for details of the selling points. Class-top dust collecting performance Each of the Models CM 5SB, CM 9SR and CM 9UBY is equipped with a high-performance dust collection cover as a standard accessory. Following is a comparison data on dust collection rate when the cutting depth is 10 mm. The dust colle
Hitachi CM 5SB, 2 1. Specifications Model CM 5SB CM 9SR CM 9UBY Max. cutting depth 30 mm (1-3/16”) 60 mm (2-23/64”) 60 mm (2-23/64”) External dia. 125 mm (5”) 230 mm (9”) Thickness 2.0 mm (5/64”) 2.5 mm (3/32”) Diamond wheel size Internal dia. 22.2 mm (7/8”) 22.2 mm (7/8”) Power source AC single phase 50 or 60 Hz Voltage and power input No-load speed 110 V,120 V: 10,000/min 230 V: 11,000/min 6,600/min 6,600/min Type of motor AC single phase commutator motor Enclosure Housing (black), handle, tail cover (green) Gear cover, packing gland--------------------------- Aluminum alloy diecasting Type of switch Sli
Hitachi CM 5SB, 3 1. Specifications comparisons (Superior specifications: ) Maker HITACHI Model name CM 5SB C Cutter dia. 125 mm (5”) 125 mm (5”) Power input* 1,300 W 1,400 W (Electronic) Max. power output* 1,900 W 2,100 W No-load speed* 11,000/min 11,000/min No-load sound pressure level 86 dB (A) 86 dB (A) Max. cutting depth 30 mm (1-3/16”) 28 mm (1-7/64”) Dust collection cover Standard accessory Optional accessory Width of base 33.5 mm (1-5/16”) 41 mm (1-39/64”) Weight 2.9
Hitachi CM 5SB, 4 1. Safety instructions In the interest of promoting the safest and most efficient use of the Models CM 5SB, CM 9SR and CM9UBY Cutters by all of our customers, it is very important that at the time of sale, the salesperson carefully ensures that the buyer seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the meaning of the precautions listed on the Name Plate. A. Handling instructions Although every effort is made in each step of design, manufacture and inspect
Hitachi CM 5SB, 5 Before attempting disassembly or reassembly, ensure without fail that the switch is turned off and the plug is disconnected from the power source outlet. 1. Precautions in disassembly and reassembly The [Bold] numbers in the description below correspond to the item numbers in the Parts Lists and the exploded assembly diagrams for the Models CM 5SB, CM 9SR and CM 9UBY. The main bodies of the Models CM 5SB, CM 9SR and CM 9UBY are common to those of the base Models G 13SB3, G 23SR and G 23UBY respectively. Therefore, only the disassembly and reassembly procedures
Hitachi CM 5SB, 6 B. Dust Cover Ass’y [88] (Model CM 9SR) [92] (Model CM 9UBY] The [Bold] numbers and the circled numbers in the descriptions below correspond to the item numbers in the Parts List and the exploded assembly diagram of the Model CM 9SR. (The dust cover ass'y is common to that of the Model CM 9UBY.) (1) Loosen the Wing Nut M6 [48] and lower the Base [68] in “G” direction. (2) Loosen the two Knob Nuts [37] and remove Cover (B) [35]. (3) Loosen the two Wheel Nuts M14 x 2 [59] using the attached Wrench [502] and remove the diamond wheel and Wheel Washer (A) [58] together from the Spindle [13]. (4) Open the Lever [52] and loosen the Bolt M8 x 22 [53] to remove the Dust Cover Ass�
7 MODEL Variable Fixed 10 20 30 40 50 60 Work Flow CM 5SB General assembly Carbon Brush x 2 Spring x 2 Pushing Button Switch Cord Armor Tail Cover Cord Dust Collection Adapter Ass’y Gear Cover Ass’y Pinion Seal Ring (A) Washer (C) Ball Bearing (629T12DD) Rubber Ring Bearing Cover Armature Ass’y Dust Seal Ball Bearing (608VV) Pushing Butto
Hitachi CM 5SB, 8 MODEL Variable Fixed 10 20 30 40 50 60 Work Flow CM 9SR General assembly Dust Cover Ass’y Handle (B) Cord Armor Gear Cover Ass’y Seal Plate Handle (A) Switch Cord Pinion Seal Washer Felt Packing Ball Bearing (6301VV) Rubber Ring (B) Bearing Cover (A) Armature Dust Seal Ball Bearing (6000VV) Bearing Bushing Gear Housing Ass’y Stator Ass’y Bearing Cover (B) Ball Bearing (6302VV) Felt Packing (B) Packing Gland Spindle
9 MODEL Variable Fixed 10 20 30 40 50 60 Work Flow CM 9UBY General assembly Dust Cover Ass’y Handle (B) Cord Armor Gear Cover Ass’y Seal Plate Handle (A) Switch Cord Handle Damper Seal Washer Felt Packing Ball Bearing (6301VV) Rubber Ring (B) Bearing Cover (A) Armature Dust Seal Ball Bearing (6000VV) Bearing Bushing Gear (A) Ass’y Retaining Ring
PART S CM 5SB DESCRIPTION REMARKS 1 320-523 TAPPING SCREW D5X25 (BLACK) 4 3 321-737 GEAR COVER ASS'Y 1 INCLUD. 4, 20 4 301-943 LOCK PIN 1 5 949-558 NUT M8 (10 PCS.) 1 7 308-543 SEAL RING (A) 1 8 980-866 WASHER (C) 1 9 629-T12 BALL BEARING 629T12DDC3PS2-L 1 10 321-733 RUBBER RING 1 11 321-734 BEARING COVER 1 * 12 360-734C ARMATURE 110V 1 * 12 36
Hitachi CM 5SB, PART S CM 5SB DESCRIPTION REMARKS 47 317-810 BRUSH HOLDER 2 48 957-754 RUBBER RING 1 49 308-536 SPRING 2 50 325-051 SLIDE BAR 1 * 51 328-808 PUSHING BUTTON SWITCH 1 * 51 319-319 PUSHING BUTTON SWITCH 1 FOR GBR (110V), USA, CAN * 52 317-491 NOISE SUPPRESSOR 1 FOR GBR (110V) 53 325-054 SWITCH HOLDER 1 54 953-327 CORD ARMOR D8.8 1 55 325-052 TAIL COVER 1 56 328-842 HITACHI PLATE 1 57 301-815 TAPPING SCREW (W/FLANGE) D4X45 2 * 58 319-320 FASTON TERMINAL 2 FOR GBR (110V) * 59 314-854 EARTH TERMINAL 1 FOR GBR (110V) 60 980-063 TERMINAL 2 FOR CORD 61 984-750 TAPPING SCREW (W/FLANGE) D4X16 2 62 937-631 CORD CLIP 1 63 NAME PLATE 1 * 64 500-234Z CORD 1 (CORD ARMOR D8.8) *
STANDARD ACCESSORIE S CM 5SB DESCRIPTION REMARKS 501 320-994 ADAPTER 1 502 937-913Z WRENCH 1 503 994-322 SIDE HANDLE 1 504 328-845 CASE (B) 1 OPTIONAL ACCESSORIE S DESCRIPTION REMARKS 601 310-338 SUPER WASHER 1 * 602 DIAMOND WHEEL 125MMXD36-D22.2 HOLE 1 EXCEPT FOR USA, CAN, GBR - 4 - Printed in Japan 12 - 07 (071212N)
Hitachi CM 5SB, PART S CM 9SR DESCRIPTION REMARKS 1 985-597 BOLT M14 2 2 322-141 PIPE HANDLE 1 3 306-888 PUSHING BUTTON 1 4 320-219 SPRING 1 5 320-218 O-RING 1 6 306-890 LOCK PIN 1 7 939-542 RETAINING RING FOR D12 SHAFT (10 PCS.) 1 8 320-224 GEAR 1 9 949-236 MACHINE SCREW M5X10 (10 PCS.) 2 10 320-229 BEARING COVER (B) 1 11 630-2VV BALL BEARING 6302VVCMPS2L 1 12 990-852 FELT PACKING (B) 1 13 320-234 SPINDLE 1 14 320-228 SEAL PLATE 1 15 320-227 PACKING GLAND 1 16 994-192 HEX. SOCKET HD. BOLT (W/FLANGE) M5X16 4 17 320-223 GEAR AND PINION ASS'Y 1 INCLUD. 8, 29 18 994-208 RUBBER RING (B) 1 19 320-220 BEARING COVER (A) 1 * 20 360-762C ARMATURE 110V 1 * 20 360-762E ARMATU
Hitachi CM 5SB, PART S CM 9SR DESCRIPTION REMARKS 50 673-489 RETAINING RING (E-TYPE) FOR D5 SHAFT 1 51 321-546 SET PIN 1 52 321-545 LEVER 1 53 306-887 BOLT M8X22 1 54 949-457 SPRING WASHER M8 (10 PCS.) 1 55 321-544 SET PIECE 1 56 328-745 WHEEL GUARD ASS'Y 1 INCLUD. 49-55 57 328-843 BOLT (A) 1 58 937-907Z WHEEL WASHER (A) 1 59 937-909Z WHEEL NUT M14X2 1 60 328-749 COVER (A) 1 61 328-750 HOLDER 1 62 314-429 SPRING 1 63 328-751 POCKET GUIDE 1 64 974-577 RETAINING RING (E-TYPE) FOR D7 SHAFT 8 65 328-755 ROLLER 4 66 328-756 ROLLER SHAFT 2 67 328-757 BOLT (SQUARE) M5 2 68 328-747 BASE 1 69 320-216 DUST SEAL 1 70 600-0VV BALL BEARING 6000VVCMPS
Hitachi CM 5SB, STANDARD ACCESSORIE S CM 9SR DESCRIPTION REMARKS 501 320-994 ADAPTER 1 502 937-913Z WRENCH 1 503 328-844 CASE (A) 1 OPTIONAL ACCESSORIE S DESCRIPTION REMARKS 601 310-337 SUPER WASHER 1 * 602 DIAMOND WHEEL 230MMXD40-D22.2 HOLE 1 EXCEPT FOR GBR - 4 - Printed in Japan 12 - 07 (071212N) *ALTERNATIVE PARTS NO. USED NO. USED CODE NO. CODE NO. ITEM NO. ITEM NO.
Hitachi CM 5SB, PART S CM 9UBY DESCRIPTION REMARKS 1 985-597 BOLT M14 2 2 323-993 PIPE HANDLE SET 1 INCLUD.1 3 306-888 PUSHING BUTTON 1 4 320-219 SPRING 1 5 320-218 O-RING 1 6 306-890 LOCK PIN 1 7 939-540 RETAINING RING FOR D10 SHAFT (10 PCS.) 1 8 326-722 COUPLING COVER 1 9 326-721 COUPLING DAMPER 4 10 326-720 COUPLING 1 11 949-236 MACHINE SCREW M5X10 (10 PCS.) 2 12 326-723 BEARING COVER (B) 1 13 630-2VV BALL BEARING 6302VVCMPS2L 1 14 990-852 FELT PACKING (B) 1 15 326-727 SPINDLE 1 16 320-228 SEAL PLATE 1 17 320-227 PACKING GLAND 1 18 994
Hitachi CM 5SB, PART S CM 9UBY DESCRIPTION REMARKS 50 673-489 RETAINING RING (E-TYPE) FOR D5 SHAFT 1 51 321-546 SET PIN 1 52 321-545 LEVER 1 53 306-887 BOLT M8X22 1 54 949-457 SPRING WASHER M8 (10 PCS.) 1 55 321-544 SET PIECE 1 56 328-745 WHEEL GUARD ASS'Y 1 INCLUD. 49-55 57 328-843 BOLT (A) 1 58 937-909Z WHEEL NUT M14X2 1 59 937-907Z WHEEL WASHER (A) 1 60 328-749 COVER (A) 1 61 328-750 HOLDER 1 62 314-429 SPRING 1 63 328-751 POCKET GUIDE 1 64 974-577 RETAINING RING (E-TYPE) FOR D7 SHAFT 8 65 328-755 ROLLER 4 66
Hitachi CM 5SB, STANDARD ACCESSORIE S CM 9UBY DESCRIPTION REMARKS 501 320-994 ADAPTER 1 502 937-913Z WRENCH 1 503 328-844 CASE (A) 1 OPTIONAL ACCESSORIE S DESCRIPTION REMARKS 601 310-338 SUPER WASHER 1 * 602 DIAMOND WHEEL 230MMXD40-D22.2 HOLE 1 EXCEPT FOR GBR - 4 - Printed in Japan 12 - 07 (071212N) *ALTERNATIVE PARTS NO. USED NO. USED CODE NO. CODE NO. ITEM NO. ITEM NO.
Hitachi CM12Y Cutter Operating instructions manual
CM12Y |
Hitachi VB 16Y Cutter Handling instructions manual
VB 16Y |
Hitachi CE 16SA Cutter Service manual
CE 16SA |
Hitachi VB 16Y Cutter Technical data and service manual
VB 16Y |
Hitachi CM5SB Cutter Instruction manual
CM5SB |
Hitachi CM 75EBP Cutter Handling instructions manual
CM 75EBP |
Hitachi CL 10D2 Cutter Technical data and service manual
CL 10D2 |
Hitachi CM12Y Cutter Handling instructions manual
CM12Y |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Saeco | Magic Cappuccino Plus Sin017XNI | Operating instructions manual | saeco/magic-cappuccino-plus-sin017xni-Z23.pdf | 25 Mar 2024 | 20 | |
2 | GMG | SG series | Starting manual | gmg/sg-series-4R3.pdf | 17 Oct 2023 | 5 | |
3 | Sharp | R-1600 | Service manual | sharp/r-1600-8HO.pdf | 16 Oct 2023 | 48 | 0.82 Mb |
4 | Roca | BROADWAY FAMILY | Installation instructions manual | roca/broadway-family-G81.pdf | 12 Aug 2022 | 8 | |
5 | Allied Telesis | AlliedWare NetScreen Routers | Network manual | allied-telesis/alliedware-netscreen-routers-72M.pdf | 17 Apr 2023 | 31 | 1.24 Mb |
6 | Honeywell | HZ519 - Digital Low Profile Silent Comfort Heater | Owner's manual | honeywell/hz519-digital-low-profile-silent-comfort-heater-43B.pdf | 26 Nov 2023 | 5 | 0.58 Mb |
Bosch
Robert Bosch GmbHPower Tools Division70745 Leinfelden-EchterdingenGermanywww.bosch-pt.com1 619 929 J76 (2011.09) O / 99 WEUWEU WEUPOF1200 AE | 1400 ACEde Originalbetriebsanleitungen Original instructionsfr Notice originalees Manual originalpt Manual originalit Istruzioni originalinl Oorspronkelijke gebruiksaanwijzingda Original brugsanvisningsv Bruksanvisnin …
POF 1400 ACE(11 pages) |
Hallde
User InstructionsBRUKSANVISNING • PŘÍRUČKY • INSTRUCCIONES DE USO • BEDIENUNGSANLEITUNG • BRUGSANVISNING • KÄYTTÖOHJE • MODE D’ EMPLOI • ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ • UPUTE ZA KORISNIKA ISTRUZIONI PER L’USO • NOTKUNARLEIÐBEININGAR • GEBRUIKSAANWIJZING • INSTRUKCJA OBSŁUGI • INSTRUÇÕES DE USO • …
CC-34(55 pages) |
Epson
How to connect an Epson wireless POS printerhttp://www.beaglehardware.com/howtowireless.html[3/4/2011 12:28:11 PM]Home Sale Specials Printers Accessories Service Support About Us Contact CatalogPrintersTM-U220TM-U200TM-U295TM-U375TM-T88IIITM-U88IVTM-T88VTM-U675TM-U590TM-H6000PowerSuppliesInterfaceCardsCablesRibbonsPaper How to connect an Epson TM Series Prin …
TM Series(12 pages) |
blackburn
Operating Instructions FOR TBM58PCTS-LIHYDRAULIC CUTTING TOOLTA04745 A Page 1 of 8 Page1.0 GENERAL INFORMATION......................................................... 21.1 Safety Rules........................................................................... 21.2 Features................................................................................. 2 …
TBM58PCTS-LI(8 pages) |
Fitel
FTS-B-581-1 Issue 1:Oct. 2019 S326R Precision Cleaver Operating Instructions ・ Please read entire manual prior to usage. ・ This manual must be kept with the S326R Precision Cleaver. Safety Instructions This manual contains the complete operating and basic maintenance instructions for the S326R Precision Cleaver. Please review this manu …
S326R(4 pages) |
Chicago Pneumatic
Operator’s ManualCP9116 Cutting ToolWARNINGTo reduce risk of injury, everyone using, installing, repairing, maintaining, changing accessories on, or working near this tool must read and understand these instructions, as well as separately provided safety instructions part number 6159948760, before performing any such task.8940172152 Rev 01
…
CP9116(32 pages) |
Zanussi Oven ZCE 8020AX/CHZanussi ZCE 8020AX/CH Oven Instruction booklet ZCE 8020AX/CH, 36 |
Smeg Washer GW3060#78MX2X: GW3060 Washer Operation & user’s manual GW3060, 45 |
RCA Antenna ANT3901ANT3901 Operation & user’s manual - 3X17AX ANT3901, 12 |
Elkay Water Dispenser LZWSRK-EZH2OWater Dispenser Installation, care & use manual (Elkay LZWSRK-EZH2O) LZWSRK-EZH2O, 8 |
Daewoo TV Color TelevisionDaewoo Color Television TV Service manual Color Television, 46 |
Sanyo Car Receiver FXCD-550 - Radio / CDSanyo Car Receiver Service manual (File: sanyo-fxcd-550-radio-cd-car-receiver-54, 04/02/2024) FXCD-550 - Radio / CD, 54 |
National Instruments Controller cRIO-9039National Instruments Controller Getting started manual (File: national-instruments-crio-9039-getting-started-manual-18, 18th Sep 2023) cRIO-9039, 18 |
TALKCOM Two-Way Radio TC-500Operation & user’s manual for TALKCOM TC-500 Two-Way Radio TC-500, 15 |
Gear4 Portable Speakers StreetParty RevolvePDF Guide (@147RCH), Gear4 StreetParty Revolve Portable Speakers (29th Sep 2023) StreetParty Revolve, 14 |
First Alert Smoke Alarm PC910First Alert Smoke Alarm PC910 Operation & user’s manual PC910, 2 |
GE Refrigerator TBX21#FKC687 TBX21: GE Refrigerator Owner Documentation TBX21, 16 |
Espresto Coffee Maker LattensiaEspresto Coffee Maker Lattensia Operating manual Lattensia, 40 |