NAVTEQ iGo Primo Operation & User’s Manual

Text of NAVTEQ iGo Primo User Guide:

• NAVTEQ iGo Primo, 23 Current GPS position and Start point Your current position displayed on the map.  In pedestrian mode it is the exact GPS position.  If a vehicle is selected for route calculation and roads are near, the symbol is snapped onto the nearest road. Normally if GPS position is available, the route starts from the current position. If there is no valid GPS position, Your System Navigation uses the last known position as the start point. Waypoint (intermediate destination) An intermediate destination of the route before reaching the final destination. Destination (end point) The final destination of the route. Route colour The route alwa

• 25 Rotating left and right , Changes the horizontal view angle of the map. Tap the button once to modify the view in large steps, or tap and hold the button to modify it continuously and smoothly. 2D or 3D view , Tap this button to switch between the 3D perspective and 2D top-down map view modes. Compass in 2D map view mode , The direct

• NAVTEQ iGo Primo, 117 Tap this button to adjust the enhanced TTS features. The following settings are available:  Verbosity level: set how short or detailed messages you want.  You can set the feature to read out traffic messages.  Whenever a route is calculated, the software can read out the quick summary of the route.  When you cross country borders, the application can read out the information about the country you have just entered.  All system messages can also be announced. Maps may contain information about the speed limits of the road seg

• NAVTEQ iGo Primo, 64 9. Finally, the results appear in a list. 10. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 11. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 12. (optional) Tap to see the details of the selected Place. Tap to return to the map.

• 113 5.1.8.1 Historical traffic If statistical traffic information is stored with the map data, HEMA NAVIGATOR can take them into account when planning a route. In normal cases, these statistics help you avoid usual traffic jams on the given day of week in the given hour but in some cases like on public holidays that fall on normal weekdays, they can be misleading. You

• NAVTEQ iGo Primo, 83 new location. Tap to confirm the destination, or tap to select a different destination. 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.8 Building a route from the list of destinations (Create Route) You can also build your route destination by destination from the My Route menu. 1. If you are on the Map screen, tap to return to the Navigation menu. 2

• NAVTEQ iGo Primo, 110 The following alert types are available:  Audio warning: beeps or the spoken type of the alert can be played while you are approaching one of these points, or extra alert sounds if you exceed the given speed limit while approaching.  Visual warning: the type of the alert point, its distance and the related speed limit appear on the Map screen while you are approaching one of these cameras. The distance from the camera is also displayed. For some of the alert points, the enforced or expected speed limit is available. For the

• NAVTEQ iGo Primo, 132 incompatibility of the Software Product with any other system, device or product (e.g. software or hardware). 8.5 The Licensor also draws the attention of the User to the fact that, when using the Software Product in any form of vehicle, observing the traffic regulations and rules (e.g. use of obligatory and/or reasonable and suitable security measures, proper and generally expected care and attention in the given situation, and special care and attention required due to the use of the Software Product) is the exclusive responsibility of the User. The Licensor shall not assume any responsibility for any damages oc

• NAVTEQ iGo Primo, 109 account. Also, this routing is not meant to give you the "greenest" route of all. It is still important to travel quickly so the result is a fast route with low fuel consumption and CO 2 emission. With a vehicle type where green routing is selectable, whichever route planning method is selected, the Green details are also shown when you confirm the route: If the selected route planning method is not Green, and you have allowed the application to show the green alternative, the price, fuel consumption and CO 2 emission differences between your selected route and the Green route are also shown on this screen: Tap the field with these details to switc

• NAVTEQ iGo Primo, 133 identifier of the device running the Software Product and not associated in any way with any personal information of the User or with the User itself. 10.2 The collected data may be uploaded to Licensor’s database and used exclusively for the purpose of enhancing and improving the features and services of the Software Product and the Databases. Uploading is executed through Licensor’s special software or by the User navigation device, and the upload may be enabled or disabled by User. After successful data upload, the collected data is deleted from the Software Product storage media. 10.3 Collected data is transmitted, stored and handled anonymo

• NAVTEQ iGo Primo, 6 1 Warnings and Safety information The navigation system helps you find your way to your destination with the built-in GPS receiver. NOT will units Media our of All transmit your GPS position and others cannot track you. If you accept this when first using the application, it collects usage information and GPS logs that may be used for improving the application and the quality and coverage of maps. The data is processed anonymously; no one will be able to track any personal information. If you change your mind later, you can enable or disable the log collection in Settings (page 127). It is important that you look at the display only when it is safe to do so. I

• NAVTEQ iGo Primo, 128 6 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals. If three satellites are available, the receiver can calculate the horizontal GPS position but the accuracy is lower and the GPS device does not give you elevation data: only 2D reception is possible. Active route The currently navigated route. Whenever the destination is set, the route is active until you de

• NAVTEQ iGo Primo, 8 5. If needed, modify the time format and unit settings. Later you can change them in Regional settings (page 126). 6. If needed, modify the default route planning options. Later you can change them in Route settings (page 119). 7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 115).

• NAVTEQ iGo Primo, 105 When you reach a waypoint, the light blue line will show the direction to the next destination. (Future legs of the route are shown with orange lines.) When you reach the final destination, navigation ends.

• 99 3. Tap . 4. (optional) Using the keyboard, you can change the name offered for the Favourite. Tap to enter numbers or symbols. 5. Tap to save the location as a new Favourite destination. 3.6 Saving a location as an alert point You can save any map location as an alert point (for example a speed camera or a railway crossing). 1. Browse the map and select a l

• NAVTEQ iGo Primo, 15 There are screen buttons and data fields on the screen to help you navigate. During navigation, the screen shows route information. By default, only one data field is displayed in the bottom right corner. Tap this field to see all route data fields. Tap any of the data fields to suppress others and display only the selected one. The data fields are different when you are navigating an active route and when you have no specified destination (the orange line is not displayed).

• NAVTEQ iGo Primo, 112 In the top right corner, the GPS reception quality icon shows the current accuracy of the position information. Icon Description HEMA NAVIGATOR has no connection to the GPS receiver: GPS navigation is not possible. Devices with a built-in GPS receiver are permanently connected. On such devices, the icon does not appear in normal circumstances. HEMA NAVIGATOR is connected to the GPS receiver, but the signal is too weak and the receiver cannot determine the GPS position. GPS navigation is not possible. Only a few satellites are received. Position information

• NAVTEQ iGo Primo, 100 3. Scroll down the list and tap . 4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap to save the location as a new alert point. 3.7 Editing an alert point You can edit a previously saved or uploaded alert point (for example a speed camera or a railway crossing). 1. Browse the map and select the alert point to edit. The red circle appears around the alert point. 2. Tap .

• NAVTEQ iGo Primo, 68 8. Tap if you have not done it before. 9. Using the keyboard, start entering the name of the Place. 10. After entering a few letters, tap to open the list of Places with names containing the entered character sequence.

• 26 Select destination Tap this button to select the Cursor as a new destination. The route is automatically calculated. 2.3.5 Quick menu The Quick menu is a selection of controls and functions that are frequently needed during navigation. It can be opened directly from the Map screen by tapping . The menu will close after a few seconds of inactivity or if you tap . T

• NAVTEQ iGo Primo, 39 5. Enter the house number: a. Tap . b. Enter the house number on the keyboard. (To enter letters, tap ). c. Tap to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination.)

Related Products and Documents (Car Stereo System):

Comparable Devices:

Similar Resources:

• Panasonic CQ-C8803N (48 pages) WMA MP3 CD Player/ReceiverModel: CQ-C8803NOperating InstructionsOperating InstructionsBedienungsanleitungBedienungsanleitungManuel dManuel d’instructionsinstructionsGebruiksaanwijzingGebruiksaanwijzingBruksanvisningBruksanvisningManuale di istruzioniManuale di istruzioniManual de InstruccionesManual de InstruccionesBrugsvejledningBrugsvejledningàÌÒÚ …

• Volvo 1992 240 (160 pages) 1992 Volvo 240240 Owner's Manual VOLVO 240 Owner's Manual U.S.A. & Canada 1992 VOLVO ESSENTIAL INFORMATION Please take the time to fill out the forms on this page. When completed, these forms will provide information essential to the proper servicing and ordering of parts for your Volvo. Owner: Name Address City, State Zip Code Tel. No. No …

• Audio System EVO 2 M100 (2 pages) M100/130/165 ANLEITUNG / USER MANUAL 2x MS100 / MS130 / MS165 / EVO 2x MOUNTING BRACKET 2x HS24 EVO2 8x SCREW3.5X20 2x INSTALL BRACKET 2x FWK TW 1x UNLOCK TOOL Vielen Dank Thank You Wir beglückwünschen Sie zum Erwerb eines hochwertigen AUDIO SYSTEM Produktes inklusiv GERMAN SOUND. Wichtig: Lesen Sie diese …

• Panasonic CQ-C7205U (66 pages) AAC WMA MP3 CD Player/ReceiverRécepteur/lecteur CD avec lecture AAC/WMA/MP3Reproductor de CD, AAC, WMA y MP3/receptorModel: CQ-C7205U/C7105UOperating InstructionsManuel d’instructionsManual de InstruccionesOperating InstructionsManuel d’instructionsManual de Instrucciones(CQ-C7205U)¡Please read these instructions (including “Limited Warranty” and � …

• Kenwood DPX500BT (48 pages) DPX500BTDPX300UDUAL DIN SIZED CD RECEIVERQuick Start GuideRECEPTEUR CD FORMAT DUAL DINGuide de démarrage rapideRECEPTOR DUAL DE CD TAMAÑO DINGuía de inicio rápido B59-2162-00/00 (KW)© 2012 JVC KENWOOD CorporationTake the time to read through this instruction manual.Familiarity with installation and operation procedures will help you obtain the best perf …

• Sony CDX-GT250MP - Fm/am Compact Disc Player (2 pages) REAR / SUBAUDIO OUTFRONT AUDIO OUTCDX-GT350MP PrécautionsCet appareil est exclusivement conçu pour fonctionner sur une tension de 12 V CC avec masse négative.Évitez de fixer des vis sur les câbles ou de coincer ceux-ci dans des pièces mobiles (par exemple, armature de siège).Avant d’effectuer les raccordements, coupez le moteur pou …

Comments, Questions and Opinions: