Manualios.com

Oce TDS450 Student Manual

Oce TDS450 Manual Online:

3.65, 2799 votes
Oce TDS450 User Manual
Oce TDS450 User Guide
Oce TDS450 Online Manual

Text of Oce TDS450 User Guide:

  • Oce TDS450, Make a print with the Océ WPD driver 3. Click the ‘Properties’ button. The following window opens: 4. Click the indicated buttons to show / hide the loaded material and the printer status in the left panel. 5. If necessary, change the settings on the ‘Basic’ tab or on the ‘Layout’, ‘Image’ or ‘Finishing’ tab. 6. Use Custom Size when you want to specify a special page size. 7. Use Profiles to save or reload your settings. 8. Click ‘OK’ to close the ‘Properties’ window. 9. Click the ‘Print’ button (or OK button) in the application’s pr

  • Load rolls of media 2. Remove the empty core from the roll holder while pressing the knob. 3. Slide the roll holder in the new roll of material while pressing the knob. The knob must be at the right hand side and paper must be positioned as shown in the figure. 4. Align the roll with the appropriate size indicator on the roll holder and release the locking mechanism. The

  • Exercises Exercise 7 Copy with a stamp (Optional) • Take a standard size original • Make sure scanner panel is in Home mode • Use upper-left softkey to select Copy • If installed, select and open the template to Copy • Open the Stamp option • Select the ‘Exercise Stamp’ - Position: Bottom - Size: Large - Color: Black • Make a copy • Check th

  • Oce TDS450, Set the media type and width Set the media type and width Set the media width 1. Press the On-line key to put the printer off-line. 2. Select the ‘Media settings’ item with the ◄ or ► key. 3. Press Next/select to enter the ‘Media settings’ menu. 4. Select ‘Roll 1’or ‘Roll 2’ with the ◄ or ► key. 5. Press Next/select to enter the ‘Roll’ or ‘Manual feed’ menu. 6. Select the ‘Width’ item with the ◄ or ► key. 7. Press Next/select to enter the ‘Width’ menu. 8. Select the desired width with the ◄or ► key. 9. Press Next/select to confirm the selected width. 10. Press On-line to put

  • Oce TDS450, Load rolls of media Load rolls of media Introduction The Océ TDS450 is available with a roll unit for one or two rolls. Each of the rolls on the Océ TDS450 can be loaded with print material of a different size or type. The size and type of the available media are indicated on the operator panel. Attention: When you load new print material, you must tell the system the size of the material and the type of print material (paper, transparent, or polyester). The definition of the size and type of the new print material is required to: • Enable the automatic media switch function to work correctly. • Suppor

  • Oce TDS450, Work with Océ Scan Manager Work with Océ Scan Manager Introduction The Océ Scan Manager is an application available only local on the Océ Power Logic® controller. With the Océ Scan Manager you can configure the destinations (places to which a file is scanned) for scan-to-file. To increase your productivity you can define automatic file naming. During scan to file, Océ Scan Manager displays the file name and the status of the file generation process. When the scan is completed a view of the scanned image is automatically displayed on the controll

  • Oce TDS450, Work with Océ Scan Manager Delete a destination (Only available in Key Operator or Repro Operator mode) 1. Select a destination. 2. Open the file menu and select Delete or click the Delete button on the toolbar. Lock a destination (Only available in Key Operator mode) 1. Select a destination. 2. From the ‘File’ menu select ‘Properties’. 3. Check the ‘Locked’ check box. 4. Click Ok to accept the destination settings. Modifications are now only allowed by the Key Operator. Unlocking a destination can only be done by the Key Operator. View a

  • Oce TDS450, Introduction Introduction The Océ TDS450 is a wide format, multifunctional system. It offers a broad range of print, copy, and (color) scan-to-file functionality. The system includes a printer (1 or 2 rolls) a controller and an optional scanner. The Océ TDS450 scanner 1. Top Cover 2. Original feed table 3. Operator panel 4. On / off switch 5. Integrated Receiving Tray The Océ TDS450 printer 1. Left cover 2. Fuser unit 3. Operator panel 4. Manual feed table 5. Drawer with media roll 6. Integrated Receiving Tray 8

  • Oce TDS450, Switch the Océ TDS450 on/off Switch the Océ TCS4 scanner on 1. Set the On/Off switch at the right to position ‘1’. Switch the Océ TCS4 scanner off 1. Set the On/Off switch at the right to position ‘0’. Start up the Océ Power Logic Controller 1. Switch on the controller and the screen. After the initial system test of the controller the applications, Océ Queue Manager, Océ System Control Panel, Océ Settings Editor and Océ Scan Manager are automatically started and the controller applications are ready

  • Oce TDS450, Work with the System Control Panel Print your system configuration 1. Select the ‘Print settings’ option in the ‘System’ menu. A list is printed of the current settings on the Océ Power Logic® Controller. Clear the system 1. Select the ‘Clear system’ option in the ‘System’ menu to delete all jobs. You can use this option in case of a corrupt job that cannot be deleted with the help of the Océ Queue Manager. Note: This option is only available in repro operator, key operator and system administrator mode. In

  • Oce TDS450, Exercises Exercise 5 Non-standard sized originals • Take a non-standard size original (22”) • Make sure scanner panel is in Home mode • Use upper-left softkey to select Copy • Select and open a template to Copy • Select Original width: By scanner • Feed the original, and press the green Start button • Check the result • Select Original width: 300 mm • Feed the original, and press the green Start button • Check the result Only the defined width is copied onto the nearest standard paper siz

  • Oce TDS450, Work with the Settings Editor Work with the Settings Editor Introduction Use the Océ Settings Editor to set the default settings of the Océ TDS450 according to your companies requirements. You can log on as either Key Operator or System Administrator. Key Operators and System Administrators have different rights to determine settings. Key Operator settings A Key Operator can configure the templates for the copy and scan-to-file jobs, the default settings for print jobs, and the default off-line fold settings. Also the printer, system and scanner defaults and stamps can be set or modified. The procedure to

  • Oce TDS450, Exercises Exercise 11 Create a template for scan-to-file (Optional) • Open the Setting Editor, and login as Key Operator • Select View KO Settings > Jobs > Scan-to-file • Open the folder ‘Template 5’ • Select Template Description, and change the Template name into ‘Scan to file’. Click Apply. • Select Top 5 settings, and include scanning options that are likely to change frequently. For example: - File Type - Destination - Resolution - Check Print - Original Width Click Apply • Select Check Print = On Click Apply • Check

  • Oce TDS450, Make a basic copy Make a basic copy Introduction A basic copy job takes two steps. Feed the original and press the start key. Every other type of copy job is called an extended copy job. An extended copy job takes one additional step, define the copy job settings at the scanner operator panel. When you turn the Océ TDS450 on or when you select 'Copy', the scanner operator panel shows five copy job templates. The copy job templates provide access to the different settings per copy job template. When you select a copy job template, the scanner operator panel shows the top 5 settings of the selected copy job template. The top 5 settin

  • Oce TDS450, Load rolls of media How to load roll 2 1. Open the cover to get access to roll 2 2. Remove the roll holder 3. Remove the empty core from the roll holder while pressing the knob (see page 15). 4. Slide the roll holder in the roll of print material while pressing the knob (see page 15). 17

  • Make a print with the Océ WPD driver Make a print with the Océ WPD driver Introduction The Océ WPD driver is used to print from any Windows application to the Océ TDS450. This enables your Océ TDS450 to function as a true wide-format printer, producing monochrome drawings from Photoshop, Corel Draw, etc., as well as CAD or electronic design applications, amongst others.

  • Oce TDS450, Instructions for safe use Instructions for safe use Instructions for safe use Accident and Damage Prevention Operating the Printing System • The printing system may only be operated by operators and service. • The printing system must not be operated by persons under the influence of alcohol or drugs, or by persons taking medication such as psychotropic drugs. • Read the entire operating manual before beginning work on and with the printing system. If there is anything in the manual that you do not understand, ask service personnel or someone with the

Related Products and Documents (Scanner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Waves X-WSG Operation & user’s manual waves/x-wsg-RZ7.pdf 07 Nov 2023 15
2 Polycom KIRK KIRK 4040 Manual  polycom/kirk-kirk-4040-HJ9.pdf 14 Aug 2022 1
3 Kawasaki ULTRA 300LX - ANNEXE 932 2011 Datasheet kawasaki/ultra-300lx-annexe-932-2011-983.pdf 22 Nov 2022 4
4 Smart Technologies SMART Clasroom Suite 2010 Overview manual smart-technologies/smart-clasroom-suite-2010-685.pdf 16 Jan 2023 26 1.51 Mb
5 Bionaire BFH912 Instruction manual bionaire/bfh912-D5Y.pdf 08 Jan 2024 37 11.97 Mb
6 Kenmore 2927000 Service manual kenmore/2927000-364.pdf 21 Sep 2023 48

Similar Resources:

  • Ortovox

    S1

    (34 pages)
    36DTORTOVOX S1+ TechnOlOgy and funcTiOnSAn immediate search with an ava-lanche transceiver and a rescue using avalanche shovels and a probe that is carried out by the tour participants themselves offers almost the only chance of survival for an avalanche victim.Pay attention to the avalanche re-port and select safe routes. Always take the avalanche transceiv …
  • Canon

    fs4000us

    (125 pages)
    CanoScan FS4000US Driver SoftwareFilmGet FSUser’s GuideQuick StartTo jump right into scanningChapter 1 to Chapter 4To proceed at a more leisurely paceYou can start using your CanoScan scanner with either of these procedures!!Appendix: TroubleshootingFor problems during installation or use …
  • RCA

    RP6198

    (2 pages)
    Scantrak 200-Channel Handheld Racing ScannerRP-6198•30 to 960 MHz•200-Channel Memory, Ten Bands•Automatic Programming•One-Touch Instant Weatherband Button•Two-Second Scan Delay•Keypad Lock•Channel Lock-Out•NiCad Recharge CircuitRacing Features:•50 Monitor Channel Memory•Direct Car Number Programming Access•RF Attenuator for greater Chan …
  • Kodak

    RFS 3600

    (2 pages)
    T AKE P ICTURES. F URTHER.TMKODAK Service & SupportKODAK PROFESSIONAL RFS 3600 Film ScannersPost-Warranty Service and SupportWe built the quality and reliability in, but no equipment is infallible. Youcan rely on quality KODAK Service and Support to help keep yourscanner performing optimally, long after your warranty expires.KODAK Advanced Unit Replacem …
  • Fujitsu

    S300M - ScanSnap - Document Scanner

    (38 pages)
    Please read this guide before connecting the scanner to your computer.For further details, refer to the "ScanSnap S300M Operator’s Guide" included in the supplied ScanSnap Setup CD-ROM.Contents Introduction .........................................................1 Conventions ........................................................6 Safety Pre …
  • Magnasonic

    FS51

    (24 pages)
    FS51 User Manual v1.023MP All-In-One Film ScannerThank you for your purchase of this Magnasonic product. Please read this user manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference.magnasonic.com/support …

Scanner Instructions:

Comments, Questions and Opinions: