DNP CX-330 Instruction Manual

Text of DNP CX-330 User Guide:

• DNP CX-330, 21 (to the next page) Connecting with a host computer Do not switch off the power of the host computer during printing. Do not use the sleep or the stand-by function on the host computer. If the power of the host computer is switched off during printing, or if the sleep or the stand-by function of the host computer is activated, the printer may stop with cards printed halfway remain in the printer. When this occurs, initialize the printer as “Stopping when printing”of page 49 on this manual. 1. Check to

• DNP CX-330, 12 Connecting the power cord 1. Check the plug. • For AC 120V type • For AC220-240V type (North America) (Europe) * The detached power cords vary according to model and country of purchase. 2. Plug the power cable into the printer. Plug the power cable of the laminator if it is installed. Always use a grounded power outlet. Never share the outlet with other electrical equipment. Use an AVR (Automatic Voltage Regulator) if there is a possibility of voltage fluctuation. Use an uninterruptible power source rather than an AVR if there is the possibility of uninterruptible power source. CAUTION Set-up (continued) CAUTI

• DNP CX-330, 6 Notes for safe operation (continued)  Pull out the power plug before cleaning the machine. • This is for preventing electric shocks.  Pull out the power plug when you won’t use the machine for a prolonged period of time to assure safety. • Remove the power plug from the outlet for safety when you won’t use the machine for a long time.  Do not move the machine with the power cable and other electric cables connected. • The cables may be damaged while being moved, which may cause a fire or electric shock. •

• DNP CX-330, 4 Contents Notes for safe operation ................................ 5 Before use ..................................................... 7 Product features .................................................... 7 Checking accessories............................................ 7 Contents of attached CD-ROM.............................. 7 Handling of transfer film, ink ribbons and cards .... 7 Handling ............................................................. 7 Storage .............................................................. 7 Storing and handling cards after printing ........... 8 Purchasing print media and cards .....................

• DNP CX-330, 38 >>Session Time Out >>MAC Address Off 0080-8842-8B00 Session Time out time setting 5 levels of time setting (off, 10sec, 20sec, 30sec, 60sec) Display of MAC address When IP Sec type is "not setting ", it is fixed at Off. MENU MENU MENU EXIT EXIT EXIT EXIT Exit user mode MENU EXIT >>IPSec mode Off Availability of IP Sec (Off, On) Displayed of the IP Sec authentication method not Setting(no definition), Preshared(presharing of key authentication), Certificate(Public key certificate)) MENU From previous

• DNP CX-330, 48 Mending broken ink ribbon and retransfer film If the ink ribbon or retransfer film is broken, mend it in the following procedures: 1. Trim neatly the end of broken portions with a pair of scissors. 2. Align both ends and apply the Scotch tape in the center of the aligned ends. Please do not discard the used ink ribbon or retransfer film on the winding side. 3. Turn the ink ribbon or retransfer film to the winding side with your hand until the mended portion is completely wound up. About printing errors If blurring or color shifts occur in your print results, clean all rollers starting with the cleaning roll

• DNP CX-330, KAT- T312-003 Jam (TurnOver) Jam (Hopper) HR is too hot. Please remove MEDIA FILM Please, Power Off. >Ink> >Cleaning >Counter Reset >Display> Ready MENU Instruction Manual Sublimation type retransfer printer Model Error codes Setting the cards Care Operation and Setting the various modes Ink replacementConnection *** CX-330 DNP See p.11~12,21 See p.14~17 See p.18~20 See p.25~39 See p.40~44 See p.46~47 • Thank for purchasing this product. • Please read this manual carefully before use to ensure correct operation. It is particularly important to read the Safety Precautions for safe operation. After reading, retain this manual carefully for

• 51 (to the next page)Specifications Main specifications Recording method : Sublimation type retransfer Feed format : Automatic feed Recording density : 300 dpi Expression gradation : 256 for Y, M, C and 2 for Bk Interface : USB2.0(High-speed/ Full speed) Ethernet(100BASE-Tx/ 10BASE-T) Operating environment conditions Temperature: 15°C ~ 30°C Humidity: 35% ~

• DNP CX-330, 17 (to the next page) 4. Wind the retransfer film to take up the slack. Turn the knob in the arrow direction to wind a small portion of the retransfer film. If the film does not wind up, go back to step 3, and insert the bobbins firmly into the bobbin holders. If the film is not tightly wound, the slack may cause the film to be caught in the parts of the printer when you set the cassette, or damaged due to wrinkles on the film. At this time, do not hold the film to remove slack. Winding deviation causes operation errors or defective prints. 5. Open the printer door and insert the ca

• Article 5 Indemnification Our Company shall not be liable for any damages in connection with the use of this Software, including direct, incidental, consequential, special and punitive damages, etc., whether based on this Agreement or otherwise, even if our Company has been or could have been aware of such damages. Similarly our Company shall not be liable for any claims by

• 30 >Display> >>Counter >>Contrast >>Back Color Total -2 BLUE ENTER ENTER ENTER MENU MENU MENU EXIT EXIT EXIT ENTER EXIT SKY BLUE, BLUE, LIGHT BLUE, GREEN, BRIGHT GREEN, YELLOW, PURPLE, PINK Exit user mode. Counter select mode 4 options (Free, Head, Total ,Rollers) Press to select the setting and press to save. Counter selection • Tot

• DNP CX-330, 46 Please, Power Off. Please Remove Media Cassette HR is too hot. Jam (Hopper) Jam (TurnOver) Jam (MG) Jam (Transfer) Jam (Discharge) Media Broken Media Search Media Run Out Ink Broken Ink Search Ink Run Out Turn Over Unit Heater Cam No Card Door Open No Cleaning Ro. No Cassette 90 91 92 93 94 A0 A1 A2 B0 B1 B2 C0 C1 D1 D7 D6 Error code listing The meaning of “reset → enter buttons” in the list is, after pressing the Reset button, press the Enter button to initialize the unit. Error code Descr

• DNP CX-330, 11 (to the next page) Connecting the IC unit (sold separately) Medium-type and compact size IC units are sold separately, as are specialized optional devices for the printer. Consult your dealer for more details. WARNING • Make sure that the power switch is turned OFF and the AC cable is detached from the plug, before connecting and disconnecting the IC units. Otherwise electric shocks, fires or malfunction of the product may occur. • Using IC units other than those specified may cause electric shocks, fir

• DNP CX-330, 33 (to the next page) Retransfer mode setting >Retransfer> >>Temp.Level >>Speed (Front) 0(Standard) -2 ENTER ENTER ENTER ENTER MENU MENU MENU EXIT EXIT EXIT EXIT ENTER EXIT MENU EXIT ENTER >>Media Type Std(1000/roll):0 >>Speed (Back) -2 EXIT >>Standby Mode Front Wait Set retransfer film Set film type Two types of frame settings (1000 or 750 frames per film) • Set to adjust the retransfer film specification. Press to select the setting and press to save. Set the retransfer temperature.6 gradations

• DNP CX-330, 28 User mode settings >Bend Remedy> >Retransfer> >>Media Type >>Temp. Level >>Speed (Front) >>Speed (Back) Std(1000/roll):0 0(Standard) +2 +2 Standard (1000/roll):0 Standard +1 +2 +2 Off +2 None 0 +3 0 SKY BLUE Off Standard Hi-Co On Total >>Temp. Level >>Speed >>Cooling Time Off +2 None >Ink> >>Ink Type >>Black Level YMCK:0 0(Standard) >>Black Mode >>UV Level Standard +3(Thick) >>SP-Ink2 Level 0(Standard) >Display> >Power Saving >>Counter >>Contrast >>Back Color

• DNP CX-330, 10 Names of parts Front When the printer door is open Slide knob Control panel Printer door Card tray Power switch Retransfer film cassette (Accessory) Ink ribbon cassette (Accessory) Rear External connection terminals Power input jack External connection terminals USB cable connection terminals E LAN cable connection terminals

• DNP CX-330, 24 Operation display LED contents and the LCD panel For details, see p. 46 – 47 of this manual. Initialization period When the power is turned on, the printer performs positioning of the ink ribbon and retransfer film. It also initializes the mechanisms of the printer and check their operations. “Initializing” is displayed on the LCD panel during this period. Preheating period When the initialization of the mechanisms completes normally, the printer increases the temperature of the retransfer roller and bend remedial rolle

• 36 Operation (continued) Coercivity setting mode Set coercivity for writing data on the ISO compatible magnetic stripe card. >MG ISO Type Lo-Co EXIT ENTER Exit user mode Press to select the setting and press to save. (The electronic beep sounds.The beep will not sound if the buzzer mode setting is set to off.) Lo-Co 238×10 2

• DNP CX-330, 31 (to the next page) Clearing the free counter Reset the free counter. The [Total] counter and [Head] counter cannot be reset. Cleaning mode The printer is provided with an operation mode for cleaning the card feed roller and the magnetic head to keep the printer in the best condition. See p.42,43 and p.44 for executing the cleaning mode. >Counter Reset OK? EXIT ENTER Exit user mode. Press to reset. (The electronic beep sounds .The beep will not sound if the buzzer mode setting is set to off.) To check that the counter is reset to zero, select “Free Counter” in “Setting the counter type” on p.29. CAUTION The head counter is cleared to zero each time the therma

• DNP CX-330, 39 CAUTION When shipping or moving the printer, you must set the transport mode. If the printer is not set the transport mode, it may have a damage. >Transport mode OK? ENTER EXIT Please, Power off Exit user mode Press to carry out transport mode. (The electronic beep sounds.The beep will not sound if the buzzer mode setting is set to off.) Please turn off the power. Turning on the power, then the transport mode is canceled. >Download OK? Press ENTER key to set DOWNLOAD mode. ENTER EXIT Exit user mode (The electronic b

• DNP CX-330, Printed in Japan KAT-T312-003 0710(VP) C 2007Victor Company of Japan, Limited Sublimation type retransfer printer CX-330 Instruction Manual ® DNP Distributor: DAI NIPPON PRINTING CO., LTD 1-1 Ichigaya-kagacho,1-chome Shinjuku-ku, Tokyo 162-8001 Japan Phone: +81-3-3266-3331 Facsimile: +81-3-3266-2732

• DNP CX-330, 9 Installation The performance of the card printer is strongly influenced by the installation location.Be careful of the following items as for installation location. • Install in the locations is not so much as to cause print defect due to dust adherence. Dusty environment increases print defect. It is recommended that the card printer is used in the locations with the cleanness Class 8 or better of ISO14661-1. But at least avoid the following locations. (1) Carpeted room (2) Crowded locations (3) Locations where paper(corrugated etc.) is handled (4) Areas near copy machines When the card printer

• DNP CX-330, 25 (to the next page)Operation Turning on the power 1. Before turning on the power, check the following: Make sure that the printer door is completely closed. Make sure that the card tray is completely closed. Make sure that the host computer is correctly connected. Make sure that any peripheral equipment is correctly connected. Make sure that the power supply outlet is correctly connected. (Power on the laminator first, if connected.) Only switch the unit on after checking the above points. 2. Turn the power ON. (I represents ON and O represents OFF.) RESET EXIT MENU ENTER READY ERROR OR Ready Preheating.. CAUTION RESET EXIT MENU ENTER READY ERROR 3. The unit will be

• DNP CX-330, 7 (to the next page)Before use Product features • This card printer allows printing of high-quality, full color images equivalent to photographic quality onto standard size (ISO 7810 compliance) plastic cards using sublimation type transfer printing. • Use of sublimation type retransfer printing enables printing of cards other than those made of PVC and non-contact IC cards, etc. with uneven surfaces that were previously difficult to print directly. • Printing with no margins on all sides is possible. • This printer have more securer erase function (security erase) to protect of the individual inform

• DNP CX-330, 26 When the printer was occurred an error during printing operation caused by above- mentioned operation or others, the retransfer film was rewinded about 3 panels. If the printer is turned off and on the power or is initialized, the printer occur the printing an error which is “INK RUNOUT” or print results problem because of the printer try to print the used retransfer film. Wind up the retransfer film about 3 panels by unused panel. See p.18 “Caution when loading the retransfer film cassette and/or the ink ribbon cassette” and p.26 “On initialization when the retransfer film cassette and/or the ink ribbon cassette is loaded”. Turning off the power 1. Check the printer

• 2 Declaration of Conformity Model Number: CX-330yyyyy(y=A-Z,0-9 or blank) Product name: Card Printer We herewith declare that the above mentioned product complies with the following council directives and harmonized standards. Council Directives: 1999/5/EC relating to radio equipment and telecommunications terminal equipment. 89/336/EEC relating to electromagnetic

• DNP CX-330, 37 (to the next page) >Network> >>Host Interface >>DHCP LAN On Printer name setting on the network Interface type(LAN,USB) Availability of DHCP(On, Off) Press the ENTER key to enter Address Setting mode. See page 39 for the setting method. Press to select the setting value and press to save. ENTER MENU MENU MENU EXIT EXIT EXIT EXIT ENTER EXIT Exit user mode •Even when LAN is selected for this setting initialization, the setting will become USB whe

• DNP CX-330, 49 (to the next page) Removing card jams To determine the part of the machine affected by a card jam refer to the error code on the operation panel LCD panel on the printer and the relevant page in this manual. When removing a jammed card, make sure that the printer is turned off before carrying out the following procedure. Hopper jam 1. Pull out the card tray. To remove the card tray, pull it out toward you until it no longer moves and lift it. 2. Remove the jammed cards. If you can hold the jammed card, pull

More Instructions:

DNP CX-330 Instruction manual 12-02-2023 32

DOWNLOAD

Related Products and Documents (Printer):

Comparable Devices:

Similar Resources:

• Epson EMP-73 (5 pages) Adjusting the Image SizeUser's Guide"Screen Size and Projection Distance"Turn off the power for both the projector and the computer before connecting them.The size of the projected image is basically determined by the distance from the lens to the screen. The values should be used as a guide for setting up the projector.Be sure to read the acc …

• Canon i850 (26 pages) BUBBLE JET PRINTERQuick Start GuideTable of ContentsPreface 1Shipping Materials 1Introduction 1Setting Up 2Preparing the Printer 2Connecting the Printer to the Computer 2Installing the Print Head 4Loading Paper 7Installing the Printer Driver 8Aligning the Print Head 12Basic Operations 16Printing with Windows 16Printing with Macintosh 18Print Head Maintenance …

• Epson kiosk EU-T300 (2 pages) Flexible kiosk printersWhether you need a kiosk printer for retail, gaming, ticketing or travelapplications, Epson has a printer that will meet your needs and yourbudget. Built using modular compo-nents and Epson’s industry-leadingprinting technology, Epson’s kioskprinters can be tailored to your exact requirements.Available with a wide range offeatures …

• Samsung Xpress SL-M2022W (91 pages) ManualsAndTutorials www.manualsandtutorials.com From Offical Samsung Page. All right reserved. SAMSUNG XPRESS SL-M2022 | User Guide User Guide of Samsung Xpress SL-M2022W …

• HP M1319 (32 pages) Getting Started GuideRead Me FirstНачално ръководство Първо прочететеPříručka Začínáme Úvodní informaceAlapvető tudnivalók kézikönyveFontos tudnivalókPodręczna instrukcja obsługiPrzeczytać przed użyciemGhid de iniţiereCiteşte-mă primulПриступая к работеСначала прочтитеPr …

• Sharp SD-2060 (87 pages) • GETTING STARTED• MAKING COPIES• SUPPLIES• COPIER TROUBLE?• GENERAL INFORMATION• OPTIONAL EQUIPMENT 21048536770ELECTROSTATICCOPYING MACHINEOPERATION MANUALMODELSD-2060PageDownloaded from: http://www.usersmanualguide.com/ …

Comments, Questions and Opinions: