Fujitsu UTY-DMMYM Operating Manual

Text of Fujitsu UTY-DMMYM User Guide:

• Fujitsu UTY-DMMYM, En-15 1 1 7-3. Function setting 7-3-1. 10 °C heat (All) setting 1 Select “10 °C Heat (All)” with the [Cursor button (Up/ Down)] and press the [Enter button]. Mo 10:00AM Function Operation Schedule O.U. low noise Schedule select Economy (All) Disable Schedule 1 Disable 10 °C Heat (All) Disable Back: Setting: 2 Since the setting items are highlighted, set “Enable” or “Disable” with the [Cursor button (Up/Down)] and press the [Enter button]. Mo 10:00AM Function Operation Schedule Cancel: OK: O.U. low noise Schedule select Economy (All) Disable Schedule 1 Disable 10 °C Heat (All) Enable 3 Reversed display release. When “Enable” is

• Fujitsu UTY-DMMYM, En-10 5. ON/OFF BUTTON OPERATION 1 1 5-1. Operation with On/Off button 1 The operation starts when the [On/Off button] is pressed once while all indoor units are stopped. Notice [On/Off button] can be operated while “Monitor screen” is displayed. Refer to [4. MONITOR SCREEN]. Note · By this operation, the indoor units start operating with the setting (operation mode, fan speed and temperature) when last operation stopped. · Refer to [6. OPERATION SETTING] if operating selected indoor units, switching the operating mode, or setting the fan speed and temperature. 2 When

• Fujitsu UTY-DMMYM, En-19 Note If selected indoor units are set up individually, it is neces- sary to set each individually. As other methods, after all indoor units are set by the same schedule, each indoor unit is changed in the setting or deleted. 1 8-3. Schedule setting 8-3-1. Selection of schedule name 1 Select the relevant schedule name (“Schedule 1” or “Schedule 2”) with the [Screen switch button (Left/ Right)]. Mo 10:00AM Schedule 1 Schedule 2 Back: Setting: Day Su Mo Tu We Th Fr Sa Time End Room 1 1

• Fujitsu UTY-DMMYM, En-6 6 Set the “hour” and “min”. Switch the setting item by [Cursor button (Left/Right)], and set with [Cursor button (Up/Down)]. (“Min” can be set quickly if the button is pressed con- tinuously.) (When [Cancel button] is pressed, it returns to the “Date” screen.) Time Cancel: OK: hour min 10: 00 AM When [Enter button] is pressed, the “Change display format” screen is displayed. Notice Set the standard time here even for summer time (day- light saving time). Another setting will be made sepa- rately. Refer to [9. SUBMENU SETTING]. 7 Set the display format of “Date format” and “Time for- mat”. Switch the

• Fujitsu UTY-DMMYM, En-28 10. OTHERS 1 1 10-1. Troubleshooting WARNING • In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electrical breaker and consult authorized service personnel. • Merely turning off the unit’s power switch will not completely disconnect the unit from the power source. Always be sure to turn off the electrical breaker to ensure that power is completely off. Before requesting service, perform the following checks: Symptom Items to check See Page CHECK ONCE MORE Doesn’t operate at all: • Has the

• Fujitsu UTY-DMMYM, En-7 3. PREPARATION 1 CAUTION • To protect the compressor, turn on the power of the air conditioning system 12 hours or more before the start of operation. Starting the air conditioning system immediately after power on may cause a failure. • Always turn off the breaker when cleaning the remote controller, air conditioner, or fi lter. It may cause injury if operation starts during cleaning. 1 3-1. Turning on the power When turning on the power after the power is cut off during the off season, follow the below procedure. 1 (1) Power on the connected outdoor units. (2) Power on all connected branch boxes. (The Central

• Fujitsu UTY-DMMYM, En-3 ]1 1-3. Name of parts CAUTION • Press the button lightly with a finger. It may cause a failure if pressed with excessive force. • Do not press the screen too hard. It may cause a failure. (1) (2) (3) (4) (5) (9) (8) (6) (7) (1) Display panel (with backlight) ......................... (See 1-3-1.) (2) Screen switch button (Left) ............................ (See 1-3-2.) (3) Menu button ................................................... (See 1-3-3.) (4) Cancel button ................................................. (See 1-3-4.) (5) Cursor button ...................................

• En-8 1 3-3. About the key lock A locking function is provided to prevent careless operation by children or outsiders. Release the lock on the “Monitor” screen when operating. Refer to [4. MONITOR SCREEN] for the “Monitor” screen. Mo 10:00AM Off Key lock Monitor Room 1 Room 4 Room 2 Room 3 Room 5 Room 6 Room 7 Room 8 To lock up: When the [Cancel button] is pressed for

• Fujitsu UTY-DMMYM, En-26 11 9-5. R.C. prohibition setting 1 Select “R.C. prohibit” with the [Cursor button] and press the [Enter button]. “R.C. Prohibition” screen is displayed. Submenu Screen Initial Mo 10:00AM Setting: Monitor: Date/Time R.C. prohibit 2 Select indoor unit (Room X) or “All units” with the [Cursor button (Up/Down)] and press the [Enter button]. When indoor units cannot be displayed in a screen, ope- rate by referring to the gauge at the right edge. Mo 10:00AM R.C. prohibition Screen Initial Cancel: OK: Room 1 Permit Room 2

• Fujitsu UTY-DMMYM, En-23 11 9-3. Date/Time setting 1 Select “Date/Time” with the [Cursor button], and press the [Enter button]. “Date and Time” screen is displayed. Submenu Screen R.C. prohibit Initial Fr 10:00AM Setting: Monitor: Date/Time 9-3-1. Date setting 1 Select “Date” with the [Cursor button (Up/Down)] and press the [Enter button]. Fr 10:00AM Date and time Initial Screen Cancel: OK: Summer time Daylight saving time Change display format Time Off 10:00AM Date Fr, 01/01/2010 2 Date screen is displayed. Select the setting items (Day, Month, or Year) with the [Cursor button (Left/Right)] and set with the [Cursor button (Up/Down)]. Fr 10:00AM Date Friday Change display format Time

• Fujitsu UTY-DMMYM, En-16 7-3-3. Outdoor unit low noise operation setting 1 Select “O.U. low noise” with the [Cursor button (Up/ Down)] and press the [Enter button]. Mo 10:00AM Function Operation Schedule 10 °C Heat (All) Schedule select Disable Schedule 1 Economy (All) Disable O.U. low noise Disable Back: Setting: 2 O.U. low noise screen is displayed. Select “O.U. low noise” with the [Cursor button (Up/Down)] and press the [Enter button]. Mo 10:00AM O.U. low noise Schedule select Start time Stop time Time setting O.U. low noise Disable – – : – – AM – – – : – – AM Back: Setting: 3 Since the setting items are highlighted, set “Enable

• Fujitsu UTY-DMMYM, En-2 • Do not use fire near this unit or place a heating apparatus nearby. It may cause malfunction. • Do not touch the switches with sharp objects. Doing so will cause injury, trouble, or electric shock. • Do not insert articles into the slit parts of this unit. Doing so will cause trouble, heating, or electric shock. 1 1-2. Features and functions 1 10 °C HEAT OPERATION (MINIMUM HEAT OPERATION) To avoid too much decrease of temperature in the room, it is operated to prevent the room temperature dropping below 10 °C. When normal operation starts, the 10 °C heat opera- tion stops. 1 ECONOMY OPERATION Operation of the

• Fujitsu UTY-DMMYM, En-4 1-3-3. About the Menu button · This button is pressed while the “Monitor” screen is displayed, it switches to the “Submenu” screen. For the details, refer to [9. SUBMENU SETTING]. Submenu Screen R.C. prohibit Initial Mo 10:00AM Setting: Monitor: Date/Time 1-3-4. About the Cancel button · When this button is pressed while setting, the setting is canceled and returns to the previous screen. · When this button is pressed after setting (or before setting), returns to the previous screen. · The operation when pressing the [Cancel button] is displayed in the lower left of each setting screen. XXXXXX XXXXXX Back: Setti

• En-17 7-3-4. Schedule select 1 Select “Schedule select” with the [Cursor button (Up/ Down)] and press the [Enter button]. Mo 10:00AM Function 10 °C Heat (All) O.U. low noise Disable Disable Economy (All) Disable Operation Schedule Schedule select Disable Back: Setting: 2 Schedule select screen is displayed. Select “Schedule” with the [Cursor button (Up/Down)] and

• Fujitsu UTY-DMMYM, En-27 11 9-6. Initial setting 1 Select “Initial” with the [Cursor button], and press the [Enter button]. “Initial” screen is displayed. Submenu Screen R.C. prohibit Initial Mo 10:00AM Setting: Monitor: Date/Time 9-6-1. Language setting 1 Select “Language” with the [Cursor button (Up/Down)] and press the [Enter button]. Mo 10:00AM Initial R.C. prohibition Date and time Back: Setting: Temp. unit °C Language English 2 Select the relevant language with the [Cursor button] and press the [Enter button]. The display returns to the “Initial” s

• En-1 OPERATING MANUAL PART NO. 9380221012-03 CENTRAL REMOTE CONTROLLER Contents 1. INTRODUCTION 1-1. Safety precautions ...............................................2 1-2. Features and functions ........................................ 2 1-3. Name of parts .......................................................3 1-3-1. About the Display panel ...............

• Fujitsu UTY-DMMYM, En-9 4-1-2. Indoor units display Schedule RC prohibit Mo 10:00AM Cool Menu Function Schedule Monitor Room 1 Room 4 Room 2 Room 3 Room 5 Room 6 Room 7 Room 8 All Economy O.U. Low noise All 10 °C Heat Operation Connected indoor units (Room X) are displayed. Operating indoor unit is highlighted. For setting operation/stop of the indoor units, refer to [6. OPERATION SETTING]. Room 1 Room 1 Indoor unit under stop Indoor unit under operation (or under 10 °C heat operation) Notice • The indoor unit displayed like the right is set from the indoor unit and outdoor unit to the remote control prohibition. In this case, operation and setti

• Fujitsu UTY-DMMYM, En-20 8-3-3. Selection of the day of the week The day of the week for schedule timer operation can be selected. 1 Select “Day” with the [Cursor button (Up/Down)] and press the [Enter button]. Mo 10:00AM Schedule 1 Cancel: Setting: Su Mo Tu We Th Fr Sa Time End Room 1 1 – – : – – AM – – – 2 – – : – – AM – – – 3 – – : – – AM – – – 4 – – : – – AM – – – Enable Schedule 2 Day 2 Current day of the week is selected. Mo 10:00AM Schedule 1 Cancel: Select: OK : Day Sa Time End Room 1 1 – – : – – AM – – – 2 – – : – – AM – – – 3 – – : – – AM – –

• Fujitsu UTY-DMMYM, En-5 2. INITIALIZATION 1 2-1. Initial settings (When starting for the fi rst time) CAUTION • To protect the compressor, turn on the power of the air conditioning system 12 hours or more before the start of operations. Starting the air conditioning system immediately after power on may cause a failure. Notice Below description is the initial setting of the Central Re- mote Controller when starting for the fi rst time. Screen switch method is different from the initial setting except when starting for the fi rst time. (Refer to [9. SUBMENU SETTING]). Follow the below p

• En-12 2 “Operation” screen is displayed. The screen consists of 2 pages, and can be switched by pressing the [Screen switch button (Left/Right)]. Mo 10:00AM Operation Room 1 Fan/10 °C Heat/Economy Cancel: OK: Mode Cool Set temp. °C 26 On-Off Off Mo 10:00AM Operation Room 1 On-Off/Mode/Set temp. Cancel: OK: 10 °C Heat Off Off Economy Fan High Proceed according to the following oper

• Fujitsu UTY-DMMYM, EnglishDeutschFrançaisEspañolItalianoEλληvIkάPortuguêsРусскийTϋrkçe OPERATING MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE FUNCIONAMIENTO MANUALE DI ISTRUZIONI ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ MANUAL DE INSTRUÇÕES РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ KULLANIM KILAVUZU KEEP THIS OPERATION MANUAL FOR FUTURE REFERENCE P/N9380221012-03 CENTRAL REMOTE CONTROLLER UTY-DMMYM UTY-DMMGM UTY-DMMXM 9380221012-03_OM_en.indd 19380221012-03_OM_en.indd 1 30/11/2553 15:25:0130/11/2553 15:25:01

• Fujitsu UTY-DMMYM, En-11 11 6-2. Switching to the “Operation” screen 1 When selecting “Operation” from the Menu on the “Monitor” screen with [Cursor button (Left/Right)] and [Enter button] is pressed, “Operation (unit select)” screen is displayed. Mo 10:00AM Off Menu Function Schedule Monitor Room 1 Room 4 Room 2 Room 3 Room 5 Room 6 Room 7 Room 8 Operation 2 Proceed to [6-2-1. Operation/setting of all indoor units at once] or [6-2-2. Operation/setting of each indoor unit] . 6-2-1. Operation/setting of all indoor units at once 1 Select “Select all” with the [Cursor button], and press the [Enter button]. Room 1 Off Mo 1

• Fujitsu UTY-DMMYM, En-18 8. SCHEDULE SETTING 1 1 8-1. About the Schedule setting 8-1-1. About the Schedule name Schedule pattern can be set for each schedule name “Sche- dule 1” and “Schedule 2”. These cannot be applied to each indoor unit simultaneously. Use it such as for “Summer” or “Winter”. 8-1-2. About the setting of the time and operations Operations up to 4 times a day can be set. Set the pattern according to the purpose and daily routines. Off On Off On On OffOff On On OnOffOff Off OffOffOff Time 1 Time 2 Time 1 Time 2 Time 3 Time 4 Time 1 Time 1 Time 2 Time 3 Time 4 Time 2 Tem

More Instructions:

Fujitsu UTY-DMMYM Installation manual 24-03-2023 5

DOWNLOAD

Related Products and Documents (Remote Control):

Comparable Devices:

Similar Resources:

• Yamaha EF3000iSE - Inverter Generator - 3000 Maximum AC Output (36 pages) YAMAHA GENERATORNEW MODEL GUIDEEF3000iSEEF3000iSEBYAMAHA MOTOR CO., LTDO.P.E. OPERATIONSSERVICE GROUPMarch 2003318040 EF3000iSE new model guide 3/14/03 4:20 PM Page 0-1 …

• Epson G5000 - PowerLite XGA LCD Projector (3 pages) INSTALLATIONHANDBOOKRemote Control Information Epson PowerLite G50001Using the Remote ControlMake sure batteries are installed as described on page 78. Follow these tips for using the remote control: Point the remote control at the front of the projector or at the screen.Stand within 49 feet (15 meters) of the projector.Controlling the Picture and SoundYou c …

• Audiovox OARP05S (4 pages) Cable Replacement RemoteOARP05S Universal Remote Control Owner’s Manual Manual del Propietario (parte posterior)IntroductionThe OARP05S Cable Replacement Remote by One For All is our latest generation universal remote control. Its sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one eas …

• Samsung SolarCell (2 pages) About the Samsung SolarCell Remote (Samsung Smart Remote) Solar CellExpose to light when the remote is not in use. This will extend the remote's operating time.USB port (C-type) for chargingUsed for quick charging. The LED on the front will light when charging. When the battery is fully charged, the LED will turn off. • The USB Cable is not provided.2 …

• Eberg REQU+ (8 pages) 1 INSTRUKCJA OBSŁUGI PILOTA EBERG REQU+ / REQU R+ LISTA FUNKCJI S Tryb czuwania A Ttryb automatyczny V Wybór prędkości H Ustawienie limitu wilgotności F Kierunek przepływu powietrza I Nawiew powietrza E Wyciąg powietrza OPIS FUNKCJI S – Tryb czuwania Po naciśnięciu przycisku „Tryb czu …

• Perenio Red Atom PETRA01 (24 pages) PETRA01 Red Atom IR Remote Control Quick Start Guide EN……………………………………………………………… 1 LT………………………………………………………………11 RU……………………………………………………………… 2 LV……………………………… …

Comments, Questions and Opinions: