Manualios.com

Clinton Electronics Public View CE-M8SD-B Operation & User’s Manual

  • Public View CE-M8SD-B Security Camera
  • maX6r8mg7KIDs
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 36

Clinton Electronics Public View CE-M8SD-B Manual Online:

3.5, 1094 votes
Clinton Electronics Public View CE-M8SD-B User Manual
Clinton Electronics Public View CE-M8SD-B User Guide
Clinton Electronics Public View CE-M8SD-B Online Manual

Text of Clinton Electronics Public View CE-M8SD-B User Guide:

  • Clinton Electronics Public View CE-M8SD-B, 26 This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, select ‘DNR’ by using the Up and Down buttons so that the arrow indicates ‘DNR’. 2. Select a desired mode using the Left and Right buttons.  OFF: Deactivates DNR. Noise is not reduced.  ON : Activates DNR so that noise is reduced. 3. Set the DNR mode to ‘ON’ and press the SET button. Then you can adjust the noise reduction level. DNR3 Notes You cannot set the DNR to ‘O

  • Clinton Electronics Public View CE-M8SD-B, 35 Problem Solution The MOTION DETECTION function is not working. Check if ‘MOTION DETECTION’ mode is turned on.• Check if the MD LEVEL is too low.• Check the setting of the MD AREA.• Colors are not quite right. Check the ‘WHITE BAL’ setting.• The screen is ickering. Check if the camera is facing directly into sunlight or uorescent light.• COLOR (DAY & NIGHT) mode is not working. Check if the AGC menu is set to the OFF position.• SENS-UP function is not working. Check if the AGC menu is set to the OFF position.• Check the limit of SENS-UP AUTO mode.• When no motion is pres- ent, the screen turns to a

  • Clinton Electronics Public View CE-M8SD-B, 31  SYNC : In areas where the supply is at 60Hz, you can synchronize the output phase of multiple cameras using the power synchronization function (Line-Lock) without using a synchronization signal generator. – INT : Internal Synchronization Type – L/L : Power Synchronization Type, Line-lock lPress the Function Setup switch. lYou can select a desired phase from 0 to 359 whe

  • Clinton Electronics Public View CE-M8SD-B, 13 The menu level is shown in the top right corner of the menu screen. First level (main menu) Second level Third level Date / time setup Date Format Here you can change the way the date is displayed. Date/ Time Adjustment Here you can change the date and time. DST Here you can enable or disable daylight savings time. 1 - Press or buttons to navigate. - To conrm or select, press button. - Press or buttons to change the value. - Press button to exit the menu. REC MENU Exit OSD DVR AV REC M

  • Clinton Electronics Public View CE-M8SD-B, 7 Video Menu: The display should be pre-set for most installations, however if some adjustment is necessary, we suggest you follow these recommendations by pressing the MENU button on the remote control: 1. First adjust the BRIGHTNESS control to set the black level so that the images are at their brightest while the black images are still black. Do not adjust too high where the black portions of the image become gray or the image will have a “washed out” appearance. 2. Set the CONTRAST control to set the white level so that the images are at their brighte

  • Clinton Electronics Public View CE-M8SD-B, 8 System Settings Menu 1. The ALARM CAMERA DWELL will allow you to change the duration that the camera image will remain on screen after an alarm event has occurred. If you wish to change this duration for motion events, you must do so in the DVR Settings menu. See pg. 16 for details. 2. The LANGUAGE can be changed to one of the following: English, French, German, Spanish, Italian, Dutch, Greek, Swedish. 3. In OSD CONTROL you can control the following: 3a. HORIZONTAL - Adjusts the horizontal position of the OSD. 3b. VERTICAL - Adjusts the vertical position of the OSD. 3c. ROTATION - Flips the OSD orientation to one

  • Clinton Electronics Public View CE-M8SD-B, 11 Current Date & Time Record Status Record Mode Video Size Recording Quality Audio Status SD Card Status Record Storage Mode Battery Level DVR Settings Recording View Device is Recording Data Basic Quality BQ NQ HQ Quarter VGA Quality 360 x 240 360 240 720 480 VGA Quality 720 x 480 Normal Quality High Quality “Loop” Mode Overwrite is Active “Stop” Mode Shows % of Storage Space Used 0% DVR SD Card Present DVR SD Card NOT Present 1 2 3 4 5 6 7 8 Manual Record Schedule Record Motion Record No Audio recording supported with this device (Disregard Audio Symbol) 1 2 3 87 6 5 4 Select from: Yr / Mo / Day or Mo / Day / Yr, HOUR : MINUTE

  • 12 Playback view To start playback you can decide between three dierent modes. Normal playback During live view press the playback/pause button to start normal playback. Normal playback speed. During the normal playback press or button to rewind or fast forward. By pressing in the same direction again you raise the search speed (Speed: x2/ x4/ x8/

  • Clinton Electronics Public View CE-M8SD-B, 29 l FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue) l SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer. Adjust this value appropriately depending on the sharpness of the picture. l RETURN : Select this to save the settings for the IMAGE ADJ. menu and to return to the SETUP menu.  MONITOR : Change the settings value of video that is appropriate to your monitor. – LCD : Select this menu item when using a LCD monitor. – CRT : Select this menu item when using a C

  • 4 Installation and Set up Unpacking your display Your Public View display comes with all of the items shown above. Carefully remove the display from its packing and set the unit on a rm surface. Save the packing in case of future service requirements. Installation of the display The display should be located where it will have the most eect on deterring potentia

  • Clinton Electronics Public View CE-M8SD-B, 34 Troubleshooting If you have trouble operating your device, refer to the following table. If the guidelines do not enable you to solve the problem, contact Clinton Electronics Technical Support at 1-800-549-6393 or 815-633-1444. Problem Solution Nothing appears on the screen. Check the power connection.• Check the Brightness of Auto Iris lens.• Press the POWER button on your remote control.• Check to ensure the proper voltage is applied to the display. In the • case of long runs or s

  • Clinton Electronics Public View CE-M8SD-B, 16 Schedule setup Recording ON / OFF (default value is OFF) Use to navigate between the hours. Press or to change the recording types. ( : Motion; : Continuous; Alarm; _: All modes active; : No mode active) Event record Here you can change the settings for the motion detection. VIDEO SIZE Here you can set the recording resolution FRAME RATE Here you can set up how many fps will be recorded. QUALITY Here you can set the recording quality. AUDIO Audio recording is not available on this device. Disregard this menu item. DURATION Here you can set how long the device will record after motion has been detected. PRE-RECORD Her

  • Clinton Electronics Public View CE-M8SD-B, 6 Power – On/O function. This will power o the display only. The internal camera can still supply video to an external display or DVR. Mute –Disables the audio on the unit. Menu – Adjustment of audio, video, signal, tools, & language. • Push MENU button once. • Use arrow buttons located around the MENU button to pick category. • When correct category is chosen, press VOL- and VOL+ buttons to adjust given parameter of display. • When adjustment of selected paramet

  • Clinton Electronics Public View CE-M8SD-B, 27 You can display pictures in color or black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and Down buttons so that the arrow indicates ‘DAY/NIGHT’. 2. Select a desired mode using the Left and Right buttons according to the picture display you want.   EXTERN : This mode allows you to apply a desired lter to external signals.   COLOR : The picture is always displayed in color.   B/W : The picture is always displayed in black and white. You can turn on or o the burst signal on B/W mode.   AUTO

  • 10 Play / Pause –Press once to play, press again to pause playback. Menu/OK – Use to open Menu and to select functions. Up, Down, Back, Forward Selection Arrows – Use in conjunction with the menu button to navigate and make adjustments. Also used to Fast Forward or Fast Reverse in playback mode. OSD Controls – Toggles the OSD functions on screen. Record – Not us

  • Clinton Electronics Public View CE-M8SD-B, 30   CAM TITLE : If you enter a title, the title will appear on the monitor. 1) If the SPECIAL menu screen is displayed, use the Up and Down buttons so that the arrow indicates ‘CAM TITLE’. 2) Set it to ‘ON’ by using the Left and Right buttons. 3) Press the SET button. 4) Use the 4 direction buttons to move to a desired letter and select the letter by pressing the SET button. Repeat this to enter multiple letters. You can enter up to 15 letters. 5) Enter a title, move the cursor to ‘POS’ and press the SET button. The entered title

  • Clinton Electronics Public View CE-M8SD-B, 5 WHEN SD CARD IS INSERTED, YOU MUST POWER CYCLE. You can do this by pushing the POWER button on the long remote, or by unplugging the power cord from the wall. SD Card 16 GB SD Card 2 GB WHEN SD CARD IS INSERTED, YOU MUST POWER CYCLE. You can do this by pushing the POWER button on the long remote, or by unplugging the power cord from the wall. SD Card 16 GB SD Card 2 GB Display Functions Camera IR Sensor LED Flasher Video SD-card slot BNC Output Power Supply Input Features Control Access The access door for the OSD Joystick, SD-Cards, and Connections is located on the back of the unit

  • Clinton Electronics Public View CE-M8SD-B, 14 Motion setup SET MD AREA The motion detection area is split up into 16 x 12 cells. Cells which are marked to detect motion are displayed red. In order to navigate use buttons and conrm by pressing button. Press play- back button in order to change the editing mode. Editing modes: SET MD SENSITIVITY Here you can set the sensitivity of motion detection. REC MENU Exit OSD DVR AV REC MENU Exit OSD DVR AV REC MENU Exit OSD DVR AV REC MENU Exit OSD DVR AV REC MENU Exit OSD DVR AV

  • Clinton Electronics Public View CE-M8SD-B, 15 Manual record - VIDEO SIZE / FRAME RATE: Here you can change the video size and frame rate for the manual recording. - QUALITY: Here you can choose between three recording qualities: Basic, Normal, High - AUDIO: This feature is non functioning on this device. Schedule record Here you can see a short a summary of the settings for motion and continuous recording. Video size 360 x 240 720 x 480 Max. frame rate 30 fps 30 fps SCHEDULE SETUP Activate / Deactivate the schedule and the recording settings. EVENT RECORD Se

  • Clinton Electronics Public View CE-M8SD-B, 23 SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas. 1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the Up and Down buttons so that the arrow indicates ‘SSDR’. 2. Turn on by using the Left/Right buttons and press SETUP to change the SSDR level in the sub- menu according to the contrast between bright and dark areas. SSDR (Super Dynamic Range) SSDR ON SSDR OFF

  • Clinton Electronics Public View CE-M8SD-B, 24 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Up and Down buttons so that the arrow indicates ‘BACKLIGHT’. 2. Select a desired mode using the Left and Right buttons depending on the camera purpose.  BLC: Enables a user to select a desired area on a picture and view that area more clearly. HLC (High Light Compensation) : If the scene contains extremely bright light areas such as from car headlight, the light can mask out much of the on-screen detail. Use HLC feature to remove these excep

  • 25 3. Select a desired mode using the Left and Right buttons and press the SET button.  BLC : Select ‘BLC’ to adjust  HLC :Enable the user to the area to be enhanced change the level limit, then adjust the level. mask color/tone and area. HLC continued Notes • For eective license plate obser

  • 2 Table of Contents Introduction………………………………………………………………………… Contents, Installation and Set-up…………………………………………………… Display Functions…………………………………………………………………… LCD Remote Control……………………………………………………�

  • Clinton Electronics Public View CE-M8SD-B, 21 1. When the SETUP menu is displayed, select ‘EXPOSURE’ by using the Up and Down buttons so that the arrow indicates ‘EXPOSURE’. Press SETUP to enter. 2. Select the desired mode using Up and Down buttons. BRIGHTNESS: Adjusts the exposure brightness. SHUTTER: You can select either auto or manual shutter. – A.FLK : Select this when you experience picture icker, which can happen when there is a clash with the frequency of the installed lighting. – ESC : Select this to control the shutter sp

  • Clinton Electronics Public View CE-M8SD-B, 20 1. Press the SETUP button, then select a menu item from the list available by using the UP and DOWN buttons. • Functions are selected using up and down buttons. • Place the cursor over a desired item, the selected position is displayed. 2. Set up a selected item by using the Left and Right buttons. 3. To nish the settings, select ‘EXIT’ and press the SET button. Navigating the OSD Menu Notes • An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the SET button. • An item with the - - - icon has no sub-menus

  • Clinton Electronics Public View CE-M8SD-B, 19 Camera functions and settings can be adjusted or changed by activating the OSD menu. When the OSD menu is activated text will display on the monitor. The user can then move the cursor to the desired function to change the setting. Camera OSD Menu SETUP Menu LENS • DC MANUAL EXPOSURE • BRIGHTNESS • SHUTTER • AGC • SENS-UP • RETURN WHITE BALANCE • ATW • OUTDOOR • INDOOR • MANUAL • AWC SET SSDR

  • Clinton Electronics Public View CE-M8SD-B, 28 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Up and Down buttons so that the arrow indicates ‘SPECIAL’. Press SETUP to enter the ‘SPECIAL’ menu. 2. Select a desired mode using the Up and Down buttons.  IMAGE ADJ: 1) When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up and Down buttons so that the arrow indicates ‘IMAGE ADJ.’ Press SETUP to enter ‘IMAGE ADJ’. 2) Select a desired mode using the Up and Down buttons. l V-REV : You can ip the picture vertically on the scree

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Jura 601 User manual manual jura/601-B64.pdf 08 Oct 2023 22
2 Edelbrock 5253 Installation instructions edelbrock/5253-LT3.pdf 21 Jun 2023 2 0.09 Mb
3 ASROCK FM2A88X-ITX Operation & user’s manual asrock/fm2a88x-itx-181.pdf 13 Jul 2022 75 22.53 Mb
4 Linn 500 Solo Owner's manual linn/500-solo-FS2.pdf 19 Apr 2023 33
5 Rollei SEAGULL 203 Manual  rollei/seagull-203-265.pdf 31 Jan 2024 14 0.6 Mb
6 Seg VCR5360GB Instruction manual seg/vcr5360gb-95O.pdf 11 Jun 2023 44 0.62 Mb

Similar Resources:

  • Huawei

    X2261-HL

    (10 pages)
    X2261-HLIssue: 06版权所有 © 华为技术有限公司 2018。保留一切权利。Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.Quick Start Guide快速入门版本:061Packing List and Qualification Card装箱清单和合格证 电子电气产品有毒有害物质声明Additional Guides Available资料获取路径Huawei Enterpri …
  • Toshiba

    IK - HD1C

    (35 pages)
    For Customer UseEnter below the Serial #which is located on thebottom of the cabinet. Retainthis information for future ref-erence.Model # IK-HD1CSerial #CAMERA CONTROL UNITINSTRUCTION MANUALFCC NOTICEThis equipment has been tested and found to comply with the limits for a Class A digital device, pursu-ant to Part 15 of the FCC Rules. These limits are de …
  • Vivotek

    SUPREME IP9165-HP

    (2 pages)
    IP9165-HP, IP9165-HT, IP9165-LPC,IP9165-LPRQuick Installation GuideRefer to your user’s manual for the operating temperature.Hinweise zur Betriebstemperatur siehe Benutzeranleitung.Zie de gebruikershandleiding voor informatie over de gebruikstemperatuur.Power off the Network Camera as soon as smoke or unusual odors are detected.Do not touch the Network Cam …
  • Panasonic

    WV-SF438

    (2 pages)
    360-degree Super Dynamic Dome Network CameraWV-SF438360-degree Network Camera featuring Super DynamicKey Features• 360° monitoring with a wide variety of transmission modes:Panorama, Double Panorama, Quad PTZ, Single PTZ, and Quad streams (H.264/VGA)• 1080p Full HD images up to 30 fps.• Combining enhanced “UniPhier®”, Panasonic’s proprietary Sy …
  • MAGINON

    IPC-100AC

    (80 pages)
    [email protected] SALES SUPPORTAUS1 800 623 4327AUSContensContensOverview ............................................................................ 4Use ....................................................................................... 5Scope of delivery/device parts ......................................... 6Preface ................... …
  • Polaroid

    DVP-300

    (2 pages)
    1Batteries / Pilhas / Batterie / Batterijen / Baterie / Baterie / Akkumulátorok / Μπαταρίες453 6 Insert so that the battery removal sheet is • under the batteries. Inserir de modo a que a folha removível • das pilhes fique por baixo das pilhas. Inserire in modo che la linguetta di rimozio-• ne delle batterie si trovi al di sotto di esse. Zo …

Comments, Questions and Opinions: