HobbyKing SBACH 55" Instruction Manual

Text of HobbyKing SBACH 55" User Guide:

• HobbyKing SBACH 55", SBACH 55 Specification: Length: 1397mm(55 ) Wing span: 1397mm(55 ) Wing area: 37sq.dm (4sq.ft) Wing loading: 59.5g/sq.dm(19.5oz/sq.ft) Flying weight: 2.2kg(4.8lbs) Radio: 6ch & 5servos Engine: 4-cycle 52-70 2-cycle 40-52 Motors: 4250 510KV ESC: 60A Battery: 6S 2200MAH 20C Propeller: 14*7 SAFETY PRECAUTIONS INSTRUCTION MANUAL First-time builders should seek advice from people having building experience.If misused or abused,it can cause serious bodily injury and damage to property. Fly only in open areas and preferably at a dedicated R/C flying site. We suggest hav

• 4 (with 5 servos), 4 4 4 channel radio for aiplane is highly recommended for this model. Warning Remove the covering with proper pressure to cut through only the covering itself.Otherwise, cutting down into the balsa structure may weaken the model part and cause accident. The pre-covered film on ARF kits may wrinkle due to variations of temperature.Smooth out as explained right. Li

• Fuselage Aileron Aileron Stabilizer Elevaror cowling Top cover PVC Wheel pants Rudder wing SBACH 55” packing list 1 Assemble the undercarriage to the fuselage with screws. Drill holes to appropriate position in the cowling and assemble the cowling to the fuselage with TP screws as illustration. 2mm 4 TP Screw (2.3x12mm) 40mm 40mm AILERON Adjustment of the ailer

• HobbyKing SBACH 55", 1 Main landing gear Motor mount box 2 Wheel(50mm) 1 Wheel(30mm) 20 7 4 6 Screw (3x16mm) 4 8 8 Screw (2x10mm) 8 4 22 8 12 6 2 4 Lock Nut (4mm ) Screw (3x15mm) Screw (4x20mm) Screw (4x35mm) 2 Screw (4x40mm) Blind Nut(4mm) 2 Blind Nut(3mm) TP Screw (2.3x12mm) Collar (2mm) Nut(4mm ) Nut(2mm ) Washer(2x6mm) Washer(3x6mm) Washer(4x8mm) 4 Washer(4x12mm) Spring Washer(4mm) Package1 3 Rod (2x300mm) 2 2 Engine mout (52x86mm) 1 1 Double-sided adhesive(410mm) Cable tie 2 Steelwire (0.5x1200mm) 4 Copper j

• HobbyKing SBACH 55", 8 2 2 Rod (2x300mm) TP Screw (2.3x12mm) Collar (2mm) 2 2 2 2 2 Screw (2x10mm) Nut (2mm ) Clevis Control horn Washer(2x6mm) 8 Pin hinge(24x24mm) 8 Pin hinge(24x24mm) Apply instant type CA glue to aileron and pin hinge. Make sure hinges are mounted in the same line. 1mm Aileron Trailing edge Make sure they are in the right position while installing. Keep some space about 1mm width between aileron and trailing edge. Assemble the aileron to main wing with instant type CA glue. Securely glue toget

• HobbyKing SBACH 55", Accessory list for the coming installation steps. Accessory list for the coming installation steps. 1 Main wing joiner (16x534mm) 2 Washer (4x8mm) 2 Screw (4x35mm) Make sure to glue securely. If not properly glued, a failure in flight may occur. Temporarily fasten down the main wing and check its correct position. Securely glue together.If coming off during flights, you'll lose control of your airplane which leads to accidents! The standard sketch map when the kit install completion. A = A &

• HobbyKing SBACH 55", Nut Washer 2x6mm Screw 2x10mm Collar Install the control horn and connect the linkage. Epoxy the control horn to the slots in the elevator,assemble the elevator servo to the fuselage as illustration. Make sure hinges are mounted in the same line. 6 Pin hinge(24x24mm) Glue the pinned hings to appropriate slots. 1mm Trailing edge Make sure they are in the right position while installing. Elevator Keep about 1mm width space between the tailing edge and elevator. Insert carefully the elevator through the fuselage. Trim the covering carefully to appropriats positio

• HobbyKing SBACH 55", Accessory list for the coming installation steps. Install the tail landing gear. Collar Collar Collar aluminium plate According to the illustration below bend the tail landing gear wire and cut off the surplus part. 30mm 25mm 4 Washer(2x6mm) Screw (2x10mm) 4 Collar (2mm) 3 1 1 Tail landing gear 2mm Tail wheel (30mm) Aluminium plate 4 3 Clevis 4 Copper joiner 4 Aluminum tube 2 2 1 Steel wire (0.5x1200mm) TP Screw (2.3x12mm) Control horn 3 4 Nut (2mm ) 30mm 25mm 2mm Trim a slot and drill a hole in the rudder for helping assemble the tail landing to it. Glue the pin hinges to the rudder and Epoxy the landing gear to the rudder as illustration. Ma

Related Products and Documents (Toy):

Comparable Devices:

Similar Resources:

• Kiddy Rides Peppa Pig Carousel (27 pages) Manufactured in the U.K. by Northern Leisure Group Ltd./Kiddy Rides Tel: +44 (0) 113 239 38 03 Email: info@kiddyrides.uk.comwww.kiddyrides.uk.comwww.kiddyrides.uk.comAPPROX.DIMENSIONS:Height - 1800mmWidth - 1550mmLength - 1550mmOperators HandbookPeppa Pig CarouselPeppa Pig CarouselNorthern Leisure Group Ltd.Serial No. Date of ManufacturePeppa Pig Carousel3 …

• KidKraft 65078B (16 pages) So Chic Dollhouse Assembly InstructionsItem #65078BPlease retain this informationfor future referenceTo order replacement parts,please visit www.kidkraft.comADULT SUPERVISION REQUIRED.***Requires 2 people for assembly.Customer Service1-800-933-0771www.kidkraft.com1WARNING: CHOKING HAZARD. Small parts and sharp points, not suitable for children under 3 years. …

• myToys Doll cradle (5 pages) AufbauanleitungAssembly instructionsDE: Bitten lesen Sie vor Gebrauch sorgfältig die Bedienungsanleitung.EN: Please read instruction manual carefully before use.PuppenwiegeDoll cradle …

• Fisher-Price W1442 (8 pages) W1442www.fi sher-price.comPlease keep this instruction sheet for future reference, as it contains important information.Product features and decorations may vary from the photograph.Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included). Requires three "AA" batteries (included). …

• Eduard MiG-21PF (2 pages) 1/249 071MiG-21PF seatbelts FABRIC 49 071ORIGINAL KIT PARTSPŮVODNÍ DÍLY STAVEBNICEPHOTO-ETCHED PARTSLEPTANÉ DÍLYPARTS TO BE REMOVEDDÍLY K ODSTRANĚNÍFILLTMELITeduardREMOVEODSTRANITOPTIONVOLBA?REPLACENAHRADITBENDOHNOUTGRINDOBROUSITSYMETRICAL ASSEMBLYSYMETRICKÁ MONTÁŽDRILL HOLEVRTAT OTVORAPPLY EXPRESS MASK AND PAINT BEFORE GLUINGPOUŽÍT EXPRESS MASK …

• AeroWorks 50cc EXTRA 260 ARF-QB (85 pages) 1 50cc EXTRA 300 ARF-QB (Quick Build) ASSEMBLY MANUAL AEROWORKS 4903 Nome Street, Denver, CO. 80239 - Phone 303-371-4222 - Fax 303-371-4320 E-mail - [email protected] …

Comments, Questions and Opinions: