ESI E-Class Installation Manual

Text of ESI E-Class User Guide:

• ESI E-Class, Table of contents General description..................................................................................................................................................A.1 Esi-Tools........................................................................................................................................................................................................A.1 Programming information ............................................................................

• Troubleshooting Remote IP Feature Phone Installation Manual G.2 • One or all Remote IP Feature Phones is getting only one-way audio or no audio. – If there is a firewall or proxy server check to make sure that the UDP Port for that phone, and for the IP PBX is open for both incoming and outgoing traffic. – If the router is using NAT ensure that the UDP port

• ESI E-Class, Remote IP Feature Phone Installation Manual Programming information B.1 Programming information Before programming the Remote Phone and the IP PBX, addressing and access information should be defined and collected. Important: We have provided the worksheet in Appendix IV to help you collect the information described on these pages. Fill out this worksheet and use it during the programming operation. The private, or local, IP addresses and UDP port numbers should be agreed upon with the site network administrator or

• ESI E-Class, Appendix I: Using PING to verify the connection Remote IP Feature Phone Installation Manual H.2 Another possible display indicating a problem is shown here: Pinging 64.221.73.226 with 32 bytes of data: Reply from 206.205.233.145: TTL expired in transit. Reply from 206.205.233.145: TTL expired in transit. Reply from 206.205.233.145: TTL expired in transit. Reply from 206.205.233.145: TTL expired in transit. Ping statistics for 64.221.73.226: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms This display indicates that a device

• ESI E-Class, Index Bandwidth, F.2 Cable modem, D.1, D.3 Cabling, F.1 Cat-5, E.1, F.1, G.1 CIR, F.2, F.3, G.2 DHCP, D.1, D.5, D.7, D.9, L.1, L.3 DIVA, D.1, D.5, D.6 DNS, D.2, D.3, D.4, D.5 Domain, D.2, D.3, D.4, D.7, D.9 DSL, D.7, D.8, D.9, D.10, F.2 Firewall, F.2 Frame Relay, F.2 Host, D.2, D.3, D.4, D.7, D.9 Internet, A.1, D.2, D.3, D.4, D.5, D.6, D.7, D.8, D.9, D.10, F.2, F.3, G.2, M.1 IP address, A.1, B.1, C.1, D.1, D.2, D.3, D.4, D.5, D.6, D.7, D.8, D.9, D.10, G.1, H.1, L.1, L.3, M.1 IP PBX, A.1, B.1, C.1, E.1, E.2, F.1, G.1, G.2, M.1 ISDN, D.1, D.4, D.5, D.

• ESI E-Class, Remote IP Feature Phone Installation Manual Configuring the remote modem/router D.7 Configuring a NAT router for DHCP The following instructions were written for the Linksys Etherfast Cable/DSL Router model Numbers BEFSRU31, BEFSR41 v.2, and BEFSR11. The steps will be similar for other NAT routers. Refer to the router’s User’s Guide for the specific instructions. 1. Retrieve the Linksys Etherfast Cable/DSL Router User’s Guide that came with the router. 2. The user’s PC must be configured to use DHCP (or, as

• ESI E-Class, Configuring the remote modem/router Remote IP Feature Phone Installation Manual D.6 Adding the Remote Phone addressing The DIVA LAN ISDN Modem has built-in network address translation (NAT) to allow multiple hosts to use the ISDN connection to the Internet and to provide limited security for those hosts. Please follow the following steps to add the Remote Phone address and UDP Port to the NAT mapping. 1. On the user’s PC (assuming it’s properly configured to use the modem), open a Web browser and, in the addr

• Appendix V: Address discovery at the remote site Remote IP Feature Phone Installation Manual L.2 If the NAT router is already in place and you have no documentation for it, and a PC is already configured to use the NAT router, the following steps will help you gather the needed IP addresses. Checking existing address information Important: The procedure shown below is for use wi

• ESI E-Class, Remote IP Feature Phone Installation Manual Configuring the remote modem/router D.5 Dial-up ISDN This procedure is specifically for the DIVA ™ LAN ISDN Modem. Other ISDN dial-up modems will be similar. Refer to the Installation Manual for the specific modem being installed. Configuring the modem 1. Retrieve the DIVA LAN ISDN Modem Quick Install Guide that came with the modem. 2. Turn to Step 4 of the Quick Install Guide. Item 2 under Step 4 will quickly explain how the user’s PC needs to be set up. The PC must be configured to use DHCP (or as stated in the Windows network properties, “obtain an IP address automatically”): • Click on Start, choose Settings,

• ESI E-Class, Programming the IP PBX and Remote IP Feature Phone Remote IP Feature Phone Installation Manual C.2 2. Now, connect the Remote IP Feature Phone to the local network. The phone should connect to the network and become operational. 3. The Function 31 parameters now need to be downloaded to the phone. Repeating the Function 31 programming steps does this. Enter the extension number and press #. You don’t have to re-enter the rest of the parameters; just push # to confirm each parameter. T

• ESI E-Class, Configuring the remote modem/router Remote IP Feature Phone Installation Manual D.4 Dedicated ISDN with a static IP address Configuring the PC 1. Configure the PC for a static IP address: • Click on the Start Menu, choose Settings, then choose Control Panel. • Double click the Network icon. The Network dialog box appears. • Choose the TCP/IP protocol. (If you do not see TCP/IP, please refer to Appendix III for instructions for installing TCP/IP.) You may have multiple instances of the protocol bound to different adapters. If so double-click on the TCP/IP that appears to the network int

• ESI E-Class, Remote IP Feature Phone Installation Manual Appendix IV: IP addressing information worksheet K.1 Appendix IV: IP addressing information worksheet Refer to “Programming information” (page B.1) for the definition of the addressing parameters on this worksheet. Also, Appendices V and VI provide additional help on correctly determining these addresses. Function 821 programming PBX private IP address __ __ __. __ __ __. __ __ __. __ __ __ PBX gateway IP address __ __ __. __ __ __

• Configuring the remote modem/router Remote IP Feature Phone Installation Manual D.2 xDSL modem with a static IP address Configuring the PC 1. Configure the PC to use a static IP address: • Click on the Start Menu, choose Settings, then choose Control Panel. • Double click the Network icon. The Network dialog box appears. • Choose the TCP/IP protocol. (If yo

• ESI E-Class, Remote IP Feature Phone Installation Manual Appendix I: Using PING to verify the connection H.1 Appendix I: Using PING to verify the remote site/ main office connection Before connecting the Remote IP Feature Phone at the remote site, verify that an IP connection can be made to the main office. This section provides a quick method for verifying the connection. If a problem is found, you must correct it before installing the Remote IP Feature Phone. Verifying the IP path to the main office can be done quickly from a user PC at the remote site using the MS ® -DOS comm

• ESI E-Class, Remote IP Feature Phone Installation Manual Programming the IP PBX and Remote IP Feature Phone C.1 Programming the IP PBX and Remote IP Feature Phone The section outlines the process for configuring the IP PBX and the Remote IP Feature phone for remote operation. This provides a quick overview. For complete instructions, please refer to Function 8 in the appropriate E-Class Installation Manual (IP E-Class or IVX E-Class). Programming the IP PBX for remote access If the IP PBX has previously been programmed for remote operation, these steps don

• Remote IP Feature Phone Installation Manual Appendix V: Address discovery at the remote site L.1 Appendix V: Address recovery at the remote site This appendix describes how to discover the remote site IP address and network information you will need to install the Remote IP Feature Phone. The remote site information needed includes the following: • IP address the Remote IP Featur

• ESI E-Class, Remote IP Feature Phone Installation Manual Appendix III: Installing the TCP/IP protocol in Windows 95/98 J.1 Appendix III: Installing the TCP/IP protocol in Windows 95/98 Important: Have the PC’s Windows CD-ROM close at hand, in case Windows requires files from it during this procedure. 1. Click on Start, choose Settings, then choose Control Panel. 2. Double click on the Network Icon. The Network dialog box appears. Select its Configuration tab. 3. Click the Add button. 4. Double-click on Protocol. 5. Highlight Microsoft under the list of Manufacturers. 6

Related Products and Documents (IP Phone):

Comparable Devices:

Similar Resources:

• AudioCodes 300HD Series (2 pages) 320HDQuick GuideCongratulations on purchasing your 320HD IP Phone!Before you begin using the phone, ensure that all of these items are included in your320HD IP Phone box:9 IP Phone Unit 9 Handset 9 AC Power Adapter (Optional) 9 Wall-mounting Screws9 Ethernet Cable2. Physical Description1. Before Install …

• Rath 624POOLVOIP (8 pages) VoIP Pool PhonesInstallation & Operations ManualN56W24720 N. Corporate Circle Sussex, WI 53089800-451-1460 www.rathcommunications.comRP8500VOIPVer. 3 04/21Made in the USA3 Year Warranty624POOLVOIP, 624MPOOLVOIP, 690SYPOOLVOIP, 690RDPOOLVOIP, 984RIP, 984RIPC1, 970VOIP, 2100-986DIP, 990SYPOOLVOIP, 990RDPOOLVOIP …

• Aastra DIALOG 4223 PROFESSIONAL (123 pages) Cover Page GraphicPlace the graphic directly on the page, do not care about putting it in the text flow. Select Graphics > Properties and make the following settings:• Width: 15,4 cm (Important!)• Height: 11,2 cm (May be smaller)• Top: 5,3 cm (Important!)• Left: -0,3 cm (Important!)This text should then be hidden.Dialog 4223 Professional / Dialog …

• Samsung SMT-i3100 (4 pages) 0345 855 0700SMT-i3100/i3105Quick Reference GuideThe i3105 IP telephone provides access to the key features of the OceServ 7000 underpinned by best in class IP technology. Oering a small desktop footprint and with the ability to wall mount, the i3105 is ideal for general oce, industrial or retail soluons use through its ability to su …

• Bticino 346310 (8 pages) e-mail Telefoon 020-6 352 350Verkoop 020-6 352 351 Administratie 020-6 352 352 Techniek 020-6 352 353Offertes 020-6 352 [email protected] Nelec BVwww.nelec.comGyroscoopweg 1061042 AX AmsterdamPostbus 206741001 NR Amsterdamintercom made easyGroothandel Nelec heeft voor alle tweedraads deurcommunicatie van BTicino zeer duidelijke Nederlandse sc …

• Panasonic KX-UT113 (2 pages) Panasonic KX-UT113 & 123 Quick Reference User Guide Taking a call Call Forward/Do Not Disturb Conference Call Speed Dial Making a Call Call Transfer Putting a Call on Hold Voicemail Adjusting the Volume Handset – Pick up the handset and you will answer the call Hands free (if applicable) – Press the SP-Phone key and you will answer the call Reject …

Comments, Questions and Opinions: