Clover TH82 Reference Manual

Text of Clover TH82 User Guide:

• Clover TH82, TH82 Series Reference Manual 55/55 GS L Sets left margin [FORMAT] <1D>H<4C>H<nL><nH> [RANGE] 0≦nL≦255 0≦nH≦255 [FUNCTION] *Sets the left margin specified by nL and nH. *The left margin is set to [(nL + nH x 256) x horizontal motion unit]. Printable area Left margin Printing area width [RANGE] *This command is effective only when processed at the beginning of a line in s

• Clover TH82, TH82 Series Reference Manual 66/66 GS w Select bar code width [FORMAT] <1D>H<77>H<n> [RANGE] 2≦n≦4 [FUNCTION] Sets the horizontal size of the bar code to dot n. [DEFAULT] n=3 This command is invalid.

• Clover TH82, TH82 Series Reference Manual 53/53 GS : Start/end macro definition [FORMAT] <1D>H<3A>H [RANGE] - [FUNCTION] Starts or ends macro definition. [CAUTION] *Macro definition is useful when the same contents need to be printed several times. *Macro definition starts when this command is received during normal operation. Macro definition ends when this command is received during macro definition. *When GS ^ is received during macr

• Clover TH82, TH82 Series Reference Manual 32/32 ESC ╲ Select relative print position [FORMAT] <1B>H<5C>H<n1><n2> [RANGE] 0≦n1≦FFH 0≦n2≦FFH [FUNCTION] *Sets the print starting position based on the current position. *[(n1+n2×256)× horizontal or vertical motion unit]. [CAUTION] *Setting that exceeds the printable area is ignored. *When the printable area moves from current position to the right, specify positive direction and to the left, specify negative direction. (When pitch N moves to the left) 65536-N = n1+n2x256 ESC a Select justifi

• Clover TH82, TH82 Series Reference Manual 14/14 5.3.3 POWER SUPPLY CONNECTOR The connector is connected the printer to an external power source. PIN SIGNAL 1 +24V 2 GND 3 NC SHELL F.G 2 3 1 SHELL CONNECTOR MODEL: Printer side: Hosiden TCS7960-532010 or equivalent User side: Hosiden TCP8927-631100 or equivalent Hosiden TCP8927-531100 or equivalent 5.3.4 DRAWER KICK-OUT CONNECTOR The pulse specified by ESC p or DLE DC4 is output to this connec

• Clover TH82, TH82 Series Reference Manual 6/6 1.4 ATTACHING THE DRAWER, GROUND WIRE AND POWER SUPPLY DRAWER KICK CABLE DC CABLE GROUND WIRE 1.4.1 THE DRAWER CAUTION : You need a drawer that fits the printer’s specification. Do not connect a telephone line to the drawer kick-out connector. Plug the drawer kick cable into the kick-out connector. If two drawers are used, use a Y-cable that meets the specifications on page 14 to ensure that both drawers receive signals correctly. 1.4.2 GROUND WIRE Use a ground wire that matches your printer. It is recommended to use a ground wire that is a

• Clover TH82, TH82 Series Reference Manual 65/65 GS v 0 Print raster bit image [FORMAT] <1D>H<76>H<30>H<m><xL><xH><yL><yH>[d1...dk] [RANGE] 0≦m≦3 48≦m≦51 0≦xL≦255 0≦xH≦255 0≦yL≦255 0≦yH≦8 0≦d≦255 k=(xL + xH x 256) x (yL + yH x 256) (k ≠ 0) [FUNCTION] Prints raster bit image specified by mode m. m Mode Vertical dot density Horizontal dot density 0,48 Normal 200dpi 200dpi 1,49 Doub

• Clover TH82, TH82 Series Reference Manual 62/62 GS b Turn smoothing mode on/off [FORMAT] <1D>H<62>H<n> [RANGE] 0≦n≦255 [FUNCTION] Turns smoothing mode on or off. When n = <*******0>B, smoothing mode is turned off. When n = <*******1>B, smoothing mode is turned on. [DETAILES] *Only the lowest bit of n is effective. *Smoothing mode is available for built-in, download characters. *Even if smoothing mode is turned on, smoothing is not pr

• TH82 Series Reference Manual 38/38 ESC u Transmit drawer status [FORMAT] <1B>H<75>H<n> [RANGE] n=0 48 [FUNCTION] Transmits the status of drawer sensor. Status bit 0 = 0: plug 1 Closed Bit 0 = 1: plug 1 Open Bit

• Clover TH82, TH82 Series Reference Manual 28/28 n=<*******0>B Double-strike mode is turned off. n=<*******1>B Double-strike mode is turned on. [DETAILES] *n is valid only for the lowest bit. *Printer output is all the same with emphasized mode. [DEFAULT] n=0 (double-strike mode off) ESC J Print and feed paper [FORMAT] <1B>H<4A>H<n> [RANGE] 0≦n≦255 [FUNCTION] Prints the data in the print buffer and feeds the paper [n x vertical or horizontal motion unit].

• Clover TH82, TH82 Series Reference Manual 24/24 0≦n2≦1 High 8 bits of the number of printing dot. 0≦d≦FFH Bit image data [FUNCTION] Prints data following the bit image modes specified by m m Mode Vertical direction No. of dots Vertical direction Dot density Horizontal direction Dot density No. of data 0 8-dot single-density 8 67DPI 100DPI n1 + n2 x 256 1 8-dot double-density 8 67DPI 200DPI n1 + n2 x 256 32 24-dot single-density 24 200DPI 100DPI (n1+n2x256)x3 33 24

• Clover TH82, TH82 Series Reference Manual 34/34 ESC c 4 Select paper sensor to stop printing (Near-end sensor model only) [FORMAT] <1B>H<63>H<34>H<n> [RANGE] 0≦n≦255 [FUNCTION] Selects the paper sensor to stop printing when a paper near end is detected. VALUE BIT FUNCTION 0 1 0 Paper roll near end sensor. Disabled. Enabled. 1 Undefined. - - 2 Undefined. - - 3 Undefined. - - 4 Undefined. - - 5 Undefined. - - 6 Undefined. - - 7 Undefined. - - *This function is valid only on n

• Clover TH82, TH82 Series Reference Manual 2/2 CONTENTS INTRODUCTION...............................................................................................................................3 FCC CLASS B .............................................................................................................................................................3 DECLARATION OF CONFORMITY.........................................................................................................................3 SAFETY STANDARDS (Power supply) ......................

• Clover TH82, TH82 Series Reference Manual 43/43 [CAUTION] *Frequent command execution may cause damage the NV memory. Thus, it is strongly recommended to write the NV memory 10 times a day. *The printer executes a hardware reset after finished writing to the NV memory. Thus, download characters, download bit images and macros should be undefined, the printer clears the receive buffer and initializes the mode to the mode that was effective at power on. At this time, DIP switch setting are read again. *During processing this command, the

• Clover TH82, TH82 Series Reference Manual 7/7 2 CHAPTER 2 OPERATION Use the indicator’s lights to monitor the printing status. 2.1 POWER SWITCH Turn the printer ON or OFF. 2.2 CONTROL PANEL 2.2.1 FEED Press the FEED button to advance the paper by one line. Hold down the FEED button to advance paper continuously. 2.2.2 ONLINE Press the ONLINE button to put the printer online or offline. The green light indicates the printer is online. Pressing the online button during printing will pause printing until the online button is pressed again. 2.3 PANEL LIGHTS 2.3.1 POWER LED This lights up whenever the printer is on. 2.3.2 ONLINE LED This li

• Clover TH82, TH82 Series Reference Manual 63/63 GS k Print bar code [FORMAT] <1D>H<6B>H<m><d1>...<dk><00>H <1D>H<6B>H<m><n><d1>...<dn> [RANGE] 0≦m≦6 65≦m≦72 [FUNCTION] Selects a bar code system and prints the bar code. m Bar code system Number of characters(k) Defined range of d 0 UPC-A 11≦k≦12 30H≦d≦39H 1 UPC-E 11≦k≦12 30H≦d≦39H 2 JAN13(EAN13) 12≦k≦13 30H≦d≦39H 3 JAN8(EAN8) 7≦k≦8 30H≦d≦39H

• TH82 Series Reference Manual 47/47 FS 2 Define download Kanji character [FORMAT] <1C>H<32>H<a1><a2>data1……data72 24 X 24 dots <1C>H<32>H<a1><a2>data1……data32 16 X 16 dots [RANGE] Japanese Kanji (JIS) a1=77H, 21H≦a2≦7EH Japanese Kanji (SHIFT-JIS) a1=ECH, 40H≦a2≦7EH / 80H≦a2≦9EH Chines

• TH82 Series Reference Manual 17/17 COMMAND COMMAND NAME TH-82 TH-200 EXECUTING SETTING STANDARD MODE PAGE MODE ESC u Transmit drawer status ESC { Turn upside-down printing mode on/off ESC Specify print density FS g1 Write to NV user memory FS g2 Read to NV user memory FS p Print NV bit image FS q Define NV bit image FS r Read NV b

• Clover TH82, TH82 Series Reference Manual 15/15 5.4 PACKAGE SPECIFICATION OUTER CASE Weight: 10.5 Kg 330 mm 560 mm 410 mm Serial no. Care mark on both sides Model name *Mark “C” should be stamped below the model name for identification. ENCLOSED GOODS: INNER CASE: 4pcs DISPLAY CARE MARK, MODEL NAME: stamped in 2 parts (both sides) SERIAL NO stickers attached: 4pcs SEALING TAPE: OPP, clear color, “H” shaped taping INNER CASE Weight: 2.4kg 305 mm 265 mm 200 mm Model name Serial No

• Clover TH82, TH82 Series Reference Manual 13/13 5.2 PAPER SPECIFICATION Paper Width: 79.5 0.5mm(3.13 0.02”) Paper roll size: Roll diameter: Maximum 80mm (3.15”) Take-up paper roll width: 80 +0.5/-1.0mm (3.15+0.02/-0.04”) Specified paper: Specified thermal roll paper: NTP080-80 [Original paper: TF50KS-E2C Nippon Paper Industries Co., Ltd.] Packaged roll paper: [Original paper: PD160R-N (Oji Paper Mfg. Co., Ltd.)] In Japan: Nakagawa Manufacturing Co., Ltd. In U.S.A: Nakagawa Mfg. (U.S.A.) Inc. In Europe: Nakagawa Mfg. (Europe) GmbH

• Clover TH82, TH82 Series Reference Manual 22/22 ESC FF Print data in page mode [FORMAT] <1B>H<0C>H [FUNCTION] Prints all buffered data in the printing area collectively in page mode. [DETAILES] *This command is enabled only in page mode. *After printing, the printer keeps the buffered data, setting values for ESC T and ESC W, and the position for buffering character data. ESC SP Set the right space amount of the character

• TH82 Series Reference Manual 27/27 [CAUTION] *The DIP switch settings are not checked again. *The data in the receive buffer is not cleared. *The macro definition is not cleared. *The NV bit image data is not cleared. ESC D Set horizontal tab positions [FORMAT] <1B>H<44>H[d1...dk]<00>

• Clover TH82, TH82 Series Reference Manual 41/41 FS p Print NV bit image [FORMAT] <1C>H<70>H<n><m> [RANGE] 0≦n≦255 0≦m≦3 48≦m≦51 [FUNCTION] Prints a NV (Non-volatile) bit image n using the mode specified by m. m Mode Vertical Dot Density Horizontal Dot Density 0,48 Normal 200 dpi 200 dpi 1,49 Double width 200 dpi 100 dpi 2,50 Double height 100 dpi 200 dpi 3,51 Quadruple 100 dpi 100 dpi [dpi : Dots per 25.4mm (dots per inch)] *n specifies the number of the NV bit image. *m specifies the bit image mo

• Clover TH82, TH82 Series Reference Manual 57/57 GS W Set printing area width [FORMAT] <1D>H<57>H<nL><nH> [RANGE] 0≦nL≦255 0≦nH≦255 [FUNCTION] *Sets the printing area width specified by nL, nH. *The printing area width is [(nL + nH x 256) x horizontal motion unit]. Printable area Left margin Printable area width [FUNCTION] *This command is effective only when processed at the beginning of a line in standard mode. *This command executes only internal flag operations in page mode. *The setting of this command does not affect printing in page mode. *I

• TH82 Series Reference Manual 54/54 GS H Select printing position of HRI characters [FORMAT] <1D>H<48>H<n> [RANGE] 0≦n≦3, 48≦n≦51 [FUNCTION] *Selects the printing position of HRI characters when printing a bar code. *n = 0,48: Not printed. *n = 1,49: Above the bar code. *n = 2,50:

Related Products and Documents (Printer):

Comparable Devices:

Similar Resources:

• Fujitsu FTP-621DCL002 (6 pages) FTP-621MCL101/102■ OVERVIEWThis thermal printer (driven by a 24 VDC) provides ultra-high speedprinting on 2-inch wide paper (60 mm). This printer is small in size,light weight, and has low power consumption. The print head isdesigned with open construction for easy maintenance.This printer is suitable for a variety of applications, such as POSterminals, …

• Canon Color imageCLASS LBP7660Cdn (2 pages) CD EOFFOFFUser Manual CD-ROMUFRII/PCL User Software CD-ROMPS User Software CD-ROM (LBP7680Cx only)ABUp to hereLGLHookHookHookLGLAConfirm the supplied accessories.Move the printer.Connect the printer and computer.USBRemove the packing materials.Load paper.Connect the power cord.ENG FRA GERITA SPAENG FRA GERITA SPA*e-Manual Getting Started Guide ARA ELL Ο � …

• MHM Flash Cures (17 pages) Operating Instruction MHM Flash Cures Operating instructions MHM Flash Cures.docx Page 1 of 17 OPERATING INSTRUCTIONS (Original instructions) MHM Flash Cures type: QC 4646 MW, QC 4355 MW, QC 4661 MW, QC 4669 MW, QC 4170 MW, QC 5069 MW, QC 70100 MW, QC 8044 MW, QC 6080 MW, QC 4646 HTL, QC 4355 HTL, QC 4661 HTL, QC 417 …

• Ricoh AP410 (124 pages) G1128611_0.00 EN USA G112-8610 Copyright © 2004 1Maintenance GuideRead This FirstTrademarks.............................................................................................................3How to Read This Manual .....................................................................................4Paper and Other MediaPaper and Other Media Suppo …

• Rimage Amigo II (4 pages) Replace a Recorder on a Rimage Producer II Autostar II™, Protégé II™ or Amigo II™ 112043_D © 2008, Rimage Corporation 1 Replace a Recorder on a Rimage Producer II Use this procedure to replace one or more recorders on an Autostar II™, Protégé II™ or Amigo II™. Rimage approved parts must be used for this process. The product warrant …

• Oki ES2232a4 (2 pages) Colour is an essential business tool today – adding impact and style to documents. The ES2232a4 and ES2632a4 produce the professional print quality output needed, whilst keeping colour usage and costs in check, making the ES2232a4 and ES2632a4 a highly affordable print solution from the business printing specialists. Take the next step.Handles different ne …

Comments, Questions and Opinions: