Drew Technologies DashDAQ Series II Instruction Manual

Text of Drew Technologies DashDAQ Series II User Guide:

• Drew Technologies DashDAQ Series II, 29 4 DashDAQ Setup Menu This section describes the setup menu. 4.1 Installed Devices The Installed Devices section of the setup menu is what makes DashDAQ truly unique. Software drivers are written by Drew Technologies so that third party devices like Innovate Motorsports, Blackline GPS, and PLX Devices can be connected to DashDAQ. Other drivers are available that can calculate real-time vehicle statistics like horsepower and torque. Every connection type has a driver that is specified in the Installed Devices setup option. OBDII,

• 9 1 Installation 1.1 SAFETY FIRST! The installation of the DashDAQ must be done in such a manner that it does not interfere with the safe operation of your vehicle. If you can not mount the DashDAQ such a manner, Promptly return the DashDAQ, in a new and unused condition, with a dated proof of purchase, to the place of purchase

• Drew Technologies DashDAQ Series II, 27 the signals displayed on the gauges. 3. When finished with your log session tap [End Log]. Your results are now saved to the memory card. Each time you go through the above three steps, the DashDAQ saves one file on the SD memory card. The file is saved in a directory called “log.” Each saved file has a log prefix. The default prefix is “log” and can be changed to your liking. To change the log prefix: 1. From the Main Menu, tap on [Setup]. 2. Using the top [<] [>] arrow buttons, move through the various configuration menus until you reach th

• Drew Technologies DashDAQ Series II, 15 2 Basic Operation This section describes the basic operation of the DashDAQ. 2.1 Low Power Mode The DashDAQ has a low power mode built in as a power and time saving convenience. This mode can be activated from the small black button on the front left of the DashDAQ. Low power mode keeps you from having to wait for the DashDAQ to start up. It has three functions: • Press and release this button quickly while the DashDAQ is on. The screen will go off, but the unit will still be on. Press the button again and the DashDAQ will instantly come

• Drew Technologies DashDAQ Series II, 25 The DashDAQ allows users to assign different colors to the signals assigned to a particular gauge. The signal will be displayed in the color chosen. To change color values: 1. Tap on a signal box . 2. Tap on the red, green, and blue swatch in the corner of the box. 3. Now tap on the color to select. Tap [Save]. 4. Tap [Save] in the Set Gauge Properties window to return to the gauges. 26 3.6 Data Logging The DashDAQ is not only a powerful gauge display, it can also log and save all information represented on the gauges. This information is saved to a Microsoft Excel *.csv file to an inserted SD memory

• Drew Technologies DashDAQ Series II, 47 3. You will need to tap on each signal and tap [Change] to specify the values of each. The DashDAQ is row ready to calculate horsepower and torque for your vehicle. Navigating to the Gauges screen will allow you to assign either signal to any gauge. For example: 1. From the Main Menu, tap on [Gauges]. 2. Tap on the gauge you would like to assign horsepower or torque to. 3. Tap on [Assign Signal]. 4. Use the [<] or [>] buttons to find the “d- Dyno Calculator” option. 5. Tap on either “Calculated Horsepower�

• 41 6. Tap [Yes] if you would like to clear the codes and turn your check engine light off. Note: This does not solve any underlying vehicle issues. 7. Tap [No] if you do not want to clear the codes. 42 6 Performance Measurements 1/4-mile, 1/8-mile, and 0-60mph times can be attained with the DashDAQ. All that

• Drew Technologies DashDAQ Series II, DashDAQ Series II Instruction Manual 2 Dear Customer, Congratulations! You have just purchased the most powerful, sophisticated, and easy to use automotive data logger ever created. The DashDAQ Series II gives everyone access to the powerful information embedded in their vehicle. When it comes to automotive performance, knowledge is horsepower. The DashDAQ Series II works with any OBDII vehicle. It can also be fitted to any other vehicle using option

• 45 4. Tap [Change]. This screen appears: 5. Tap [Driver]. 6. To select the Dyno Calculator, use the [<] or [>] buttons to navigate to the “Calculator” selection. 46 7. Tap [Dyno Calculator] to highlight the Dyno Calculator driver. Tap [Save]. 8. Tap [Save] again. Tap [Save] once more at the Installed

• Drew Technologies DashDAQ Series II, 33 4.2 Clock The clock setup option allows the user to set the on board clock to current time and date. This information will be time-stamped into all log files that you make. To set the time and date: 1. Tap on [Setup] from the Main Menu. Using the top [<] or [>] buttons scroll to the Clock option. 2. Tap [Set Clock]. 3. Now tap on the arrows to make the correct adjustments to the values. 4. Now tap [Save]. Tap [Save] again to make your changes permanent. 34 4.3 Install From SD Card This setup option allows you to install various user licenses, drivers, and Config files. These

• Drew Technologies DashDAQ Series II, 35 4.4 Backup To SD Card Backup to SD is the setup option that allows you to backup various user specific setting of the DashDAQ. One example is backing up the gauge setup for all dashboard themes and gauge layouts within each theme. This is done by backing up “Config File.” To back a specific license, driver, or config file: 1. Tap on [Setup] from the Main Menu. Using the top [<] or [>] buttons scroll to the “Backup To SD Card” option. 2. Tap on the file you would like to backup. When the file is highlighted, tap [Backup]. 3. Follow the onscreen prompts to make sure your file is backed up su

• Drew Technologies DashDAQ Series II, 3 Table Of Contents 1 Installation...................................... 9 1.1 SAFETY FIRST! ..................................................... 9 1.2 Attaching Windshield Mount ................................... 9 1.3 Windshield Mounting ............................................ 10 1.4 Mounting suggestions:.......................................... 10 1.5 Cable Routing....................................................... 10 1.6 OBDII Connector .................................................. 11 1.7 Connections.....

• Drew Technologies DashDAQ Series II, 23 3.3 Set Gauge Min/Max Values The DashDAQ allows users to specify the data range for each gauge. Tap on the [Minimum] button to set the bottom value for a gauge. Tap on the [Maximum] button to set the top of the gauge. When you tap on either [Minimum] or [Maximum] this screen will appear: Tap in the desired value. Tap [+/-] to make this value negative. 24 3.4 Set Gauge High/Low Warning The High/Low Warning allows users to set the visual representation of “redline” on a gauge. For example: If the gauge has a maximum value of 6,000 and you set a High Warning of 5,000, the

• Drew Technologies DashDAQ Series II, 51 5. Tap on the desired measurement and tap [Save]. Tap [Save] again to view the calculation on the gauge. 9 Parameters From the Main Menu you can access the Parameter menu. This menu allows you to change the scaling and other options associated with an installed driver. Some examples include: changing offsets for analog inputs, changing OBDII units to metric, etc. The Parameters menu allows you to customize how the data is display

• Drew Technologies DashDAQ Series II, 55 11.2 Update your DashDAQ: 1. Connect the USB cable to the single USB port on the left as you look at the DashDAQ screen, and then to your computer. 2. Go to Start>Programs>Drew Technologies, Inc> DashDAQ Update Tool 3. Click on [Check Web For Updates]. This will download the latest firmware for your DashDAQ. 4. Take note of what firmware version is being downloaded. Click [Yes]. 5. After the download if your DashDAQ is not listed, click [Refresh List]. 6. When you see your DashDAQ listed, click to highlight it and click [Update Firmware]. 56 7. The Select Dash

• Drew Technologies DashDAQ Series II, 13 Connections (cont.) USB Ports Power Button MMC SD Memory Card Slot 14 1.8 SD Memory Card Always insert and remove the memory card with the DashDAQ powered off. The SD Memory card needs to be inserted with the gold connections facing towards you as you look at the screen. Press the card into the DashDAQ until you hear a click. If the card sticks out at all, it has not been pushed in all the way. To remove, press the card in until you hear the

• Drew Technologies DashDAQ Series II, 11 Cable routing tips: • Find your OBDII connector first and work the cable to where it is to be mounted on the windshield. • Route your DashDAQ OBDII cable between interior panel grooves. These grooves will hold the cable as well as conceal it. • Use wire or zip ties to bundle any excess cable. Cable routing “Don’ts” • Don’t let your cable dangle by your feet. • Don’t let the cable hang free. • Keep the cable away from the steering wheel and any steering column controls. • Golden Rule: If the cable looks to be routed poorly, it most likely is. 1.6 OBD

• Drew Technologies DashDAQ Series II, 5 Components Included with DashDAQ • Display Unit • Windshield Mount and four Screws • USB Cable • OBDII Cable • Software CD 6 Optional DashDAQ Accessories • DashDAQ Accessory Cable for analog and serial connectivity. This cable allows you to add two 0-5 volt sensors, as well as many other third party data collection devices. The DashDAQ Accessory cable can be obtained from Drew Technologies, or your DashDAQ dealer. • SD Memory Card

• 7 IMPORTANT! THIS IS A HIGH PERFORMANCE PRODUCT, USE AT YOUR OWN RISK Do not use this product until you have carefully read the following agreement. This sets forth the terms and conditions for the use of this product. The installation of this product indicates the BUYER has read and understands this agreement and accepts its terms and

• Drew Technologies DashDAQ Series II, 49 5. Tap [Driver]. 6. To select the Fuel Economy Calculator, use the [<] or [>] buttons to navigate to the “Calculator” selection. 7. Tap “Economy Calculator” to highlight the Fuel Economy Calculator driver. Tap [Save]. 8. Tap [Save] again. Tap [Save] once more at the Installed Device setup window. The Fuel Economy Calculator needs four signals to calculate Fuel Economy: Air-to-Fuel ratio, Fuel Density, Vehicle Speed sensor, and Mass Air Flow sensor. These variabl

• Drew Technologies DashDAQ Series II, 21 3 Gauge Setup & Navigation This section describes how to setup gauges and navigate. 3.1 Navigating Gauges: To access DashDAQ gauges, tap on [Gauges] from the Main Menu. The last gauge layout you selected or this screen will be displayed. To change gauge layouts, tap on the [<<] and [>>] buttons. Here are a few examples: Every gauge and box can be assigned a parameter/signal. 22 3.2 Assign a Signal to a Gauge Before specifying what signal you would like a gauge to display, make sure the New Vehicle proc

• Drew Technologies DashDAQ Series II, 31 6. To select the Innovate LC-1, use the [<] or [>] buttons to navigate to the “Wideband” selection. 7. Tap [Innovate LC-1] to highlight the Innovate LC-1 driver. Tap [Save]. 8. Tap [Save] again. Tap [Save] once more at the Installed Device setup window. 32 To make use of the driver after it has been selected: 1. Tap on [Gauges] from the Main Menu. 2. Tap on a gauge you would like to assign the Innovate LC-1 signal to. 3. Tap [Assign Signal]. 4. Use the [<] or [>] buttons to navigate to the Innovate LC-1 heading. T

• Drew Technologies DashDAQ Series II, 17 Tapping the tap the [I Accept] button will cause the gauge screen to appear: The [<<] and [>>] arrow buttons at the bottom allow you to cycle through different gauge layouts. The [Main Menu] button in the lower right corner takes you to the main menu where you can access all of DashDAQ’s features. 18 2.3 Main Menu Buttons The [Diags] button takes you to the DashDAQ code reader. Here you can view and clear codes on any OBDII vehicle. The [Setup] button gives access to configuration options of the DashDAQ. (See DashDAQ Setup Menu) The [Performance] button will dire

• Drew Technologies DashDAQ Series II, 37 4.7 Dashboard Theme The DashDAQ has a very powerful graphical interface that allows its users to change the look and feel of the gauges. Each theme has different gauge layouts. The Dashboard Theme option gives users the ability to switch between these “skins.” By tapping on a specific theme name and tapping [Save], the new skin will be instantly loaded. Gauge layouts will change between various themes. When you tap on [Gauges] from the Main Menu you will notice the gauges are much different. The Da

• 53 3. Windows will do a preliminary search for the driver, but will not find one. This screen will appear: 54 4. Click on [Browse my computer for driver software]. You will see this message: 5. Click on [Browse] and highlight your CD- Rom drive. Click [Ok]. Now click [Next]. You will see this screen: 6. Click on [Ins

• Drew Technologies DashDAQ Series II, 57 12 APPENDIX 12.1 Support Please be sure to reference our online FAQ’s. All support questions can be answered at the online forums at www.dashdaq.com. These forums are constantly monitored, and will provide you with the fastest answers. 58 12.2 Technical Specifications Display 4” COLOR TFT w/touch panel Resolution 480 x 272 (QWVGA) w 24-bit color display System Processor 240MHZ ARM9 Vehicle Bus Processor 48MHZ ARM7 RAM 64MB SDRAM Flash 16MB Flash Memory Expansion MMC/SD Card 128MB to 8GB+ Device I/O touch-panel, ambient light sensor, 16- bit stereo line-out, 1W speaker, USB device port

Related Products and Documents (GPS):

Comparable Devices:

Similar Resources:

• NavTour G4 (17 pages) ContentsWhat’s included in the packageInstallationTurning on for the first timeEntering your first destinationWhat is on the screenPlanning a routeOther featuresAdditional info135810111215Quick Start Guide …

• Sandel SG102 (10 pages) 82011-PG-ERR-E4 SANDEL SG102 PG ERRATA PAGE 1 OF 2 SG102 AHRS Pilot’s Guide Effectivity and Errata Insert this update ahead of the cover page of the Pilot’s Guide referenced below. Date: Effectivity: Errata: 10-MAY-2016 Pilots Guide 82011-PG-E SG102 Software Version 1.35 for SG102 (Mod 1) SG102 Software Version 1.62 for SG102 (Mod …

• usf NT-V3 (2 pages) NT-V3 SeriesThe NT-V3 Series >NT-V3 SeriesUSFleetTrackingAt US Fleet Tracking, customer service is our top priority. If you have any questions or encounter any diffi culties with this system, please contact our technical support at (405) 726-9900. They are available Monday through Friday 7 a.m. to 7 p.m. CT and Saturday 9 a.m. to 4 p.m. CT.If you have an …

• Furuno GP-39 (5 pages) 1 Mod el: GP-39 Using the GP39 as an SCX-21 (NMEA0183) Display and Setting Device 1. Navigation Display for SCX-21 2. Setting Menus for SCX-21 3. Interconnection and Settings 3.1. Interconnection 3.2. Setting – Operation Mode 3.3. Update Guidance INDEX …

• AIBLUE GoFindMe (19 pages) Online Manual Welcome GoFindMe GPS Tracker gives you a complete solution of tracking, locating and communicating even with no network service. It’s perfect for hiking, camping, or any other outdoor activities and family use. Please read this instruction carefully so that you can make full use of GoFindMe. GoFindMe Device Introduction Power Button Press th …

• Tracker G400 SERIES (48 pages)  …

Comments, Questions and Opinions: