Dwyer Instruments TIC-30 Operation Manual

Text of Dwyer Instruments TIC-30 User Guide:

• Dwyer Instruments TIC-30, 79 Specification All data is based on Dwyer’s testing standard. Subject to change without notice. Model TIC-10 TIC-20 TIC-30 Imaging Performance Field Of View/Mini. Focus Distance 20° x15°/0.1m Thermal Sensitivity(N.E.T.D) 0.1°C@30°C Detector Type Focal Plane Array (FPA), uncooled microbolometer IR Resolution 160 x120 Spectral Range 8-14um Focus Mechanism Manual Focusing I.F.O.V(With Standard Lens) 2.2 mrad Image Presentation Image Modes Thermal Thermal/Visible /DuoVision

• 54 How to select an image 1 After you select [Open] or [Delete] option under [File] menu, a message shown as below will appear in the bottom-left screen. 2 If the image you wish to open or delete is not in the current folder, press the [LEFT] or [RIGHT]arrow on the omni selector repeatly to select the image. 3

• Dwyer Instruments TIC-30, 30 In DuoVision display mode, you can move the fusion area via the combination keys. Moving the fusion square Move the area up C + UP Move the area down C + DOWN Move the area left C + LEFT Move the area right C + RIGHT About the IR/Visible settings IR Percentage Sets the ratio of IR images and Visual images. The value is from 1% to 100%. The items above are activated only in [Duo-Vision] mode.

• Dwyer Instruments TIC-30, 22 About the local settings Language Selects the language of the menus and messages. Video output Sets the format of the video output of the camera. PAL or NTSC. Temp unit Sets the format of the displayed temperature unit of the camera. °C or °F. Distance unit Sets the format of the displayed distance unit of the camera. Meter or Foot.

• Dwyer Instruments TIC-30, 67 Connection and Download Follow the steps to install the Bluetooth headset (optional) first time. 1 Turn off the camera and Bluetooth headset. 2 Turn on the Bluetooth headset first. Press and hold the power button about 4 seconds. And then you can see the power indicator begins to blink red and blue. The headset is in pairing status in 90 seconds. 3 Turn on the camera. You can see the green indicator of camera lights and the blue indicator flashes at the same time. In this mode, camera is preparing

• Dwyer Instruments TIC-30, 9 Prevent Malfunction Read on to learn about preventing malfunction of IR camera Avoid damaging the detector of the IR camera Warning: Do not aim the IR camera directly into the sun or at other intense heat source which could damage the detector of the IR camera. Avoid Condensation Related Problems Moving the IR camera rapidly between hot and cold temperatures may cause condensation (water droplets) on its external and internal surfaces. You can avoid this by placing the IR camera in the plastic case (bundle) and letting it adjust to temperature changes slowly before removing

• Dwyer Instruments TIC-30, 34 Shooting IR Camera Adjustment Image settings 1 Press the MENU/ENTER key. 2 Press the UP or DOWN arrow on the omni selector to select the [System Setup] menu, then Press the MENU/ENTER key. 3 Press the UP or DOWN arrow on the omni selector to select [Camera Setup], then press the MENU/ENTER key. 4 Set the Image Settings. • Press the UP or DOWN arrow on the omni selector to select an item to change. • Press the RIGHT or LEFT arrow on the omni sel

• Dwyer Instruments TIC-30, 7 Do not handle the power cord if your hands are wet Handling it with wet hands may lead to electrical shock. When unplugging the cord, ensure that you hold the solid portion of the plug. Pulling on the flexible portion of the cord may damage or expose the wire and insulation, creating the potential for fires and electrical shocks. Do not cut, alter or place heavy items on the power adapter cord Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock. Use only the recommended power accessories Use of pow

• Dwyer Instruments TIC-30, 74 Appendix Emissivity table (continue) Material Temperature（°C ） Emissivity approximation Iron Polished cast iron 200 0.21 Processed cast iron 20 0.44 Polished tempered iron 40～250 0.28 Polished steel ingot 770～1040 0.52～0.56 Raw welded steel 945～1100 0.52～0.61 Surface ferric oxide 20 0.69 Completely rusty surface 22 0.66 Rolled iron plate 100 0.74 Oxidized steel 198～600 0.64～0.78 Cast iron (Oxidizing at 600°C ) 198～600 0.79

• Dwyer Instruments TIC-30, 61 Connection and Download Connecting to a monitor A video-compatible monitor connected via the video cable (supplied) can be used to view and analyze images you shoot. 1 Attach video cable to the video out terminal on the multi-functional dock. 2 Plug the other end of the video cable to the video in jack on the monitor. To the video in jack

• Dwyer Instruments TIC-30, 49 Shooting Fulfill the Analysis Function Remove analysis tools this This topic briefly explains how to remove analysis tools you place on the screen. Remove analysis tools 1 Press the MENU/ENTER key. 2 Press the UP or DOWN arrow on the omni selector to select the [Analysis] menu. 3 Press the UP or DOWN arrow on the omni selector to select [Remove Spot]. • Press the LEFT or RIGHT arrow on the omni selector to select to remove all the spots/areas/profile or rem

• 38 Shooting Fulfill the Analysis Function Setting object/global settings 1 Press the MENU/ENTER key. 2 Press UP or DOWN arrow on the omni selector to select [Analysis], then press the MENU/ENTER key. 3 Press UP or DOWN arrow on the omni selector to select [Object Para.], then press the MENU/ENTER key. 4

• Dwyer Instruments TIC-30, 14 Preparing the IR Camera Charging the Battery Pack Follow the steps below to charge the battery pack for the first time and subsequently when the low battery icon appears on the Display Panel. 1 Align the edge of the battery pack with the line on the battery, then insert the battery in the direction of the arrow. 2 Attach the power cord to the battery charger and plug the other end into a power outlet. • The charge indicator light is red while the battery pack is charging and it turns green when charging is complete. • After charging, unplug the battery charger and remove the ba

• Dwyer Instruments TIC-30, 48 Shooting Fulfill the Analysis Function *Isotherm analysis 1 Press the MENU/ENTER key. 2 Press the UP or DOWN arrow on the omni selector to select the [Analysis] menu. 3 Press UP or DOWN arrow to select [Isotherm], then press the Menu/Enter key. Areas of concern will be highlighted with color. 4 Setting isotherm range. • Start from Step 1 to set or select isotherm analysis. • Press the UP or DOWN arrow on the omni selector to select isotherm range. • IL and IH will appear at the bottom right corner. It is the high limit (IH) and low limit (IL) of the isotherm range.

• 65 Connection and Download You can analyze and save the thermal video in computer directly via the USB by the optional real-time software. 1 Power on the camera, connect the camera and the dock, p.59. 2 Connect the dock and computer via USB cable (optional). 3 The operation system will recognize the camera after install the driver.

• Dwyer Instruments TIC-30, 2 Thumb Index Introduction of camera components and battery loading. Preparing the IR Camera Describes basic functions, learning how to turn on/off the IR camera and work with the control panel and LCD monitor. Basic function Describes working with the camera, from each analysis settings to using the camera’s various analysis tools. Shooting Explains how to review recorded images, erase images and playback voice memos. Playback and erase Explains how to transfer images or video to a computer.

• Dwyer Instruments TIC-30, 5 Read This First Please Read Test Shots Before you try to shoot important subjects, we highly recommend that you shoot several trial images to confirm that the IR camera is operating and being operated correctly. Please note that Dwyer Instruments, Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of an IR camera or accessory that results in the failure of an image to be recorded or to be recorded in a format that is machine read

• Dwyer Instruments TIC-30, 16 • Remove the battery pack when the camera is not in use. • The SD Card must be formatted in FAT32. Otherwise, the IR camera may not recognize the SD card. Battery Status Symbols The following icons indicate the battery status on the LCD display. Sufficient battery charge Low battery Replace or recharge the battery

• Dwyer Instruments TIC-30, 58 Download the Images Download the images via SD card You can get the SD card out of camera, and download the images to the computer via the supplied SD card reader. 1 Open the battery / SD card cover. 2 Press the SD card lightly, then the SD card will pop-up automatically. 3 You can download the IR images via the supplied SD card reader.

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• Kerbl 81890 (72 pages) IPCam Pet#81890(DE) Bedienungsanweisung(FR) Mode d’emploi(EN) Instructions for use(PL) Instrukcja obslugi(CS) Návod k obsluze(NL) Gebruiksaanwijzing(IT) Istruzioni per l’uso …

• Abus TVIP52502 (385 pages) TVIP52502 D Bedienungsanleitung  User manual F Manuel utilisateur  Gebruikershandleiding  Brugerhåndbog  Instrukcja obsługi  Инструкция по эксплуатации Version 10/2013 …

• Sri SP Series (6 pages) SP Series IP Camera Quick Start Guide 1. Product Introduction 1.1 Indoor IP Camera 1. IR Sensor 2. IR LED 3. Lens 4. Recording Indicator Light 5. Network Indicator Light 6. Microphone 7. Network Interface 8. microSD Card Slot 9. DC Power Interface Indicator Light Solid Blinking Off Network (Red) Network Connected Network Connecting Network Disconne …

• Bosch FlexiDome NDN-498V03-21P (8 pages) Video | NDN-498 FlexiDome2X Day/Night IP CamerasFlexiDome2X Day/Night IP cameras are progressive scanCCD cameras in a compact, high-impact rated, vandal-resistant housing.Equipped with 20-bit DSP with 2X‑dynamic, they have awide dynamic range for sharper, more detailed imageswith outstanding color reproduction.They can tri-stream video simultaneously — o …

• BURG-WACHTER SNC-4323IR (2 pages) Kurzanleitung / Quick installation guide SNC-4323IR Version 1.0sfi/0214/dt-engl/A5 KURZANLEITUNG IP-Kamera SNC-4323IR Um die IP-Kuppelkamera in Betrieb zu nehmen, gehen Sie bitte wie folgt vor: 1. Installieren Sie die Kamera an der gewünschten Stelle. 2. Nutzen Sie PoE (Power-over-Ethernet) zur Spannungsversorgung (PoE Switch oder PoE In …

• GeoVision GV-BX110D (156 pages) User's ManualGV-IPCam H.264 1.3M/VGABefore attempting to connect or operate this product,please read these instructions carefully and save this manual for future use. …

Comments, Questions and Opinions: