Korenix JetCard Series Operation & User’s Manual

Text of Korenix JetCard Series User Guide:

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 3-8 4. Select FIFOs tab to configure FIFO settings. In this window, you can adjust FIFO Interrupt levels and XON/XOFF Flow Control threshold. Removing the Driver Click on StartÆSettingsÆControl Panel ÆSystemÆHardwareÆDevice Manager. Select the JetCard and Auxiliary Function, and click on the Uninstall icon located in the tool bar.

• Korenix JetCard Series, Table of Contents Chapter 1 Introduction........................................................................................................ 1-1 Overview...................................................................................................................................1-2 Product Features........................................................................................................................1-2 Package Checklist .....................................................................................................................1-3 Installation Guide.....................

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 1-2 Overview Korenix JetCard Series Multiport Serial Card is a high performance Universal PCI card. JetCard Series can bring you high-speed and high-quality serial communication service. JetCard Series products use high-integrated Oxford chipset, which provides up to 921.6 kbps data transmission speed. JetCard Series products also come with 128-byte FIFO, which allows JetCard to occupy the least system resources even when operating with full speed and full loading. In order to cope with harsh industrial environments, Korenix eng

• Korenix JetCard Utility Korenix JetCard Series Multiport Serial Card User’s Manual 4-7 5. After finishing setting all of the parameters, click on DiagnoseÆGo or the Go icon to start the test. If the JetCards and pins are functioning normally, you will see OK message on the Test Report. If connections are not correct, you will see ERR message on the

• Korenix JetCard Series, Software Installation Korenix JetCard Series Multiport Serial Card User’s Manual 3-9 Windows 2000 Installing the driver 1. Follow the hardware installation instructions in the previous chapter to install the JetCard first. Windows 2000 will automatically detect the new JetCard after you power on your PC. 2. Insert the JetCard software CD into the CD-ROM. 3. The window to open next indicates that the Hardware Wizard found the new hardware. Click on Next to install. 4. Select Search for a suitable driver for my device (recommended), and click on Next to continue

• Korenix JetCard Series, Software Installation Korenix JetCard Series Multiport Serial Card User’s Manual 3-5 2. Select Hardware tab, and click on the Device Manager button. 3. Select Multi-port serial adapters to check if your JetCard is installed.

• Korenix JetCard Series Multiport Serial Card User’s Manual 3-18 3. Click on Exit to leave the uninstallation window. Linux Installing the Linux Driver Note: use root as the username to log in. Note: mount your CD device and insert Korenix JetCard CD first. 1. Copy the driver file to the hard disk and decompress. # mkdir korenix # cp /mnt/cdro

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 3-10 5. Select Specify a location, and click on Next to continue. 6. Use Browse… to locate the driver file on the CD. 7. The window that opens next shows the driver files search results. Click on Next to continue.

• Korenix JetCard Series, Software Installation Korenix JetCard Series Multiport Serial Card User’s Manual 3-11 8. The Digital Signature Not Found window will prompt next. Click on Yes to continue. 9. After the driver installation is complete, click on Finish to leave the installation window. 10. Next, you need to install JetCard Auxiliary Function and COM ports. The steps for installing COM ports are almost the same. Follow the windows instructions and repeat several times until each COM port is installed. How to Check the Installatio

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 4-2 After you finish JetCard’s hardware and software installation, you can use the provided Korenix JetCard Utility to test functions of your communication system. Installing Korenix JetCard Utility Note: Korenix JetCard Utility can be operated under Windows 2003/XP/2000/ME/98. 1. Insert the JetCard software CD into the CD-ROM. Locate the setup file in jetcard_utility folder. 2. Click on Yes to continue. 3. Click on Next to continue.

• Korenix JetCard Series, Software Installation Korenix JetCard Series Multiport Serial Card User’s Manual 3-3 5. In the window that opens next, select Search for the best driver in these locations, and check Include this location in the search. Click on Next to start installing the driver. 6. The window to open next will show you that wizard starts installing the driver. In the window that prompts next, click on Continue Anyway to proceed the driver installation.

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 3-2 Windows Korenix JetCard Series products support Windows 2003/XP/2000/98/ME/NT OS. Follow the steps below to install the driver and configure COM ports. Windows XP/2003 Installing the Driver 1. Follow the hardware installation instructions in the previous chapter to install the JetCard first. Windows XP/2003 will automatically detect the new JetCard after you power on your PC. 2. Insert the JetCard software CD into the CD-ROM. 3. In the Found New Hardware Wizard window, select No, not this time, and click on Next to c

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 3-16 5. After the driver installation is complete, click on Exit to leave the installation window. How to Check the Installation 1. Click on StartÆSettingsÆControl Panel. 2. Double clicks on the Devices icon.

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 5-2 Cable Selection and Pin Assignments JetCard 1204/1208 Korenix provides 2 types of cables for JetCard 1204, which are CM37M9x4 and CM37M25x4. These 2 cables can convert JetCard 1204’s DB37 connectors into 4 sets of DB9 or DB25 male connectors. Korenix provides 2 types of cables for JetCard 1208, which are CM62M9x4 and CM62M25x4. These 2 cables can convert JetCard 1208’s DB62 connectors into 4 sets of DB9 or DB25 male connectors. The pin assignments of DB9 and DB25 connector are shown

• Korenix JetCard Series Multiport Serial Card User’s Manual 3-4 7. A Completing the Found New Hardware Wizard window will open when the driver installation is complete. Click on Finish to leave the installation window. 8. Next, you need to install JetCard Auxiliary Function and COM ports. The steps for installing COM ports are almost the same. Follow the windows instructi

• Korenix JetCard Series, Korenix JetCard Utility Korenix JetCard Series Multiport Serial Card User’s Manual 4-5 9. The window to open next will allow you to confirm whether all of the settings are correct. If you wish to make changes, click on Back to do so. If the settings are correct, click on Install to start the installation process. 10. The JetCard Utility installation is complete. If you wish to start up the utility right away, check the Launch Korenix JetCard Diagnostic box and click on Finish. Otherwise uncheck the Launch Korenix JetCard Utility box, and click on Finish to leave the installation window. Using Korenix JetCard Utility Korenix JetCard Utilit

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual A-2 JetCard 1402/1402i JetCard 1404/1404i Bus Interface 32-bit Universal PCI 32-bit Universal PCI Number of Ports 2 4 Max. Number of Boards 4 4 IRQ Assigned by PCI plug and play Assigned by PCI plug and play Data Bits 5, 6, 7, 8 5, 6, 7, 8 Stop Bits 1, 1.5, 2 1, 1.5, 2 Parity Bits None, Even, Odd, Space, Mark None, Even, Odd, Space, Mark Controller 16C950C compatible (Oxford) 16C950C compatible (Oxford) FIFO Size 128 bytes 128 bytes Speed 50 bps to 921

• Korenix JetCard Series, Software Installation Korenix JetCard Series Multiport Serial Card User’s Manual 3-7 2. Select Settings tab. This window is for you to configure the basic settings of the COM port. If you wish to reconfigure COM port mapping, click on Advanced…button. 3. In this Advanced Settings for COM window, you can remap this COM port.

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 3-14 8. Click on Next to continue. 9. Click on Next to start installing the driver. 10. After the driver installation is complete, click on Finish to leave the installation window. 11. Next, Windows 98/ME will start to install COM ports automatically. Sit back and wait for the COM port installation to finish. How to Check the Installation Follow the instructions in How to Check the Installation section in

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 3-6 4. Select Port (COM & LPT) to check if each port of the JetCard is installed successfully. The port number depends on which JetCard model you installed. In this case, 4 COM ports of JetCard 1204 were installed. COM Port Configuration This section includes information of how to configure COM ports. 1. Click on StartÆSettingsÆControl Panel ÆSystemÆHardwareÆDevice Manager. And then double click on the COM port you

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 3-12 Windows 98/ME Installing the Driver 1. Follow the hardware installation instructions in the previous chapter to install the JetCard first. Windows 98/ME will automatically detect the new JetCard after you power on your PC. 2. Insert the JetCard software CD into the CD-ROM. Windows 98 Windows ME 3. The window to open next indicates that the Hardware Wizard found the new hardware. Click on Next to install. 3. Select Specify the location of the driver (Advanced). Click on Next to install. Windows 98

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 5-6 Example 6 Topology Type Multidrop 4-wire RS-485 Model Name JetCard 1402, JetCard 1402i JetCard 1404, JetCard 1404i In this example, you can use 2 twisted pairs of cables and 1 ground cable to connect multiple PCs with JetCard Series RS-422/485 Multiport Serial Card installed. All JetCards are configured to 4-wire RS-485 mode. Please note that RS-485 transmission distance is up to 1200m (5000ft). In this topology, the number of connected devices (PCs) can be up to 32. Example 7 Topology Type

• Korenix JetCard Series, Hardware Installation Korenix JetCard Series Multiport Serial Card User’s Manual 2-3 Panel Layout JetCard 1204 JetCard 1208 JetCard 1402 JetCard 1402i JetCard 1404 JetCard 1404i

• Korenix JetCard Series, Korenix JetCard Series Multiport Serial Card User’s Manual 4-6 3. Click on DiagnoseÆConfig to open the Diagnostic window. Click on Communication Parameters tag to set up serial communication basic parameters. 4. Click on Test Item tag to select the test you wish to perform. The Internal Test can allow you to check JetCard’s status, while the External Test can allow you to check if the pins and cables needed for communications are functioning normally (please use loop back circuit for your test env

• Korenix JetCard Series, Hardware Installation Korenix JetCard Series Multiport Serial Card User’s Manual 2-5 Installing Your JetCard Follow the steps below to install your JetCard. 1. Power off the PC. 2. Remove the PC case. 3. Remove the slot cover. 4. Insert the JetCard into the PCI card. 5. Tighten the JetCard with screws. 6. Place the PC case back. Removing Your JetCard 1. Power off the PC. 2. Remove the PC case. 3. Remove the screws from the JetCard. 4. Remove the JetCard. 5. Place the PC case bac

• Korenix JetCard Series, A A Appendix A Specifications JetCard 1204 JetCard 1208 Bus Interface 32-bit Universal PCI 32-bit Universal PCI Number of Ports 4 8 Max. Number of Boards 4 4 IRQ Assigned by PCI plug and play Assigned by PCI plug and play Data Bits 5, 6, 7, 8 5, 6, 7, 8 Stop Bits 1, 1.5, 2 1, 1.5, 2 Parity Bits None, Even, Odd, Space, Mark None, Even, Odd, Space, Mark Controller 16C950C compatible (Oxford) 16C950C compatible (Oxford) FIFO Size 128 bytes 128 bytes Speed 50 bps to 921.6 Kbps 50 bps to 921.6 Kbps Data Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Surge Protection Embedded 15KV ESD Surge Protection Embedded

Related Products and Documents (PCI Card):

Comparable Devices:

Similar Resources:

• Dell LSI 9285 (16 pages) Installing the LSI 9285 PCIe Card on Dell PowerEdge C6220 SystemsFollow the procedure in this document to install the LSI 9285 PCIe card on your Dell PowerEdge C6220 1U node. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as d …

• Advantech PCI-1712 (4 pages) 1 Startup Manual STARTUP MANUALPCI-1712/1712L1 MS/s, 12-bit, 16-ch High-Speed Multifunction card Before installation, please make sure that you have received the following:• PCI-1712, PCI-1712L card• Driver CD• Quick Start User ManualIf anything is missing or damaged, contact your distributor or sales representative immediately.For mor …

• ICP DAS USA PCI-1202 (8 pages) - 1 - Language English Version V1.0 Update Oct.2008 ……………………………………………… What’s on your package?  One PCI-1202/1602/180x series card  One companion PCI CD (V3.6 or later)  One Quick Start Guide(This document) ……………………………………………… Installing Windows Driver Follow t …

• StarTech.com PCISOUND5CH (9 pages) Manual Revision: 12/15/2011For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l'utilisateur - fr.startech.comES: Guía del usuario - es.startech.comIT: Guida per l'uso - it.startech.comNL: Gebruiksaanwijzing - nl.startech.comPT: Guia do usuário - pt.startech.comPCISOUND5CH5 Chan …

• StarTech.com UVCHDCAP (13 pages) Instruction Manual revision: 04/24/2018For the latest information, technical specications, and support for this product, please visit www.StarTech.com/UVCHDCAPFR: Guide de l’utilisateur - fr.startech.comDE: Bedienungsanleitung - de.startech.comES: Guía del usuario - es.startech.comNL: Gebruiksaanwijzing - nl.startech.comPT: Guia do usuário - pt.starte …

• Advantech ECU-P1706 (4 pages) STARTUP MANUALECU-P1706 Startup Manual 1ECU-P1706250 kS/s 16-bit Simultaneous 8-ch Analog Input PCI-104 Card Packing ListBefore you begin installing your module, please make sure that the following materials have been shipped:  ECU-P1706 card  Energy Series Driver and Utility DISC  Quick Start User Manual  1 x Front Panel (for ECU-P1706)  2 x …

Comments, Questions and Opinions: