Exadigm GT IPSec Setup Manual

Text of Exadigm GT IPSec User Guide:

• Exadigm GT IPSec, GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 2 of 13 Rev. 1/1212 Copyright 2012 ExaDigm, Inc. All Rights Reserved. Printed in USA Warranty The information contained in this document is subject to change without notice. ExaDigm makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose. ExaDigm shall not be liable for errors contained herein or for incidenta

• Exadigm GT IPSec, GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 3 of 13 Rev. 1/1212 Table of Contents 1.0 Web GUI Login ..................................................................................................... 4 1.1 Initial Connection ....................................................................................................... 4 2.0 IPsec .................................................................................................................... 4 2.1 Tunnel Configuration .................

• Exadigm GT IPSec, GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 4 of 13 Rev. 1/1212 1.0 Web GUI Login 1.1 Initial Connection 1. Verify the GT unit’s power supply is connected; the green LED light will be illuminated. 2. Connect a PC or laptop to the front of the GT using a RJ-45 Ethernet cable. Note: The Ethernet Port on the GT is “auto-sensing”, which means a straight through or cross- over cable can be used to connect to the ExaDigm router. 3. Launch a web browser and connect to the GT using the address http://192.168.12.20:8080/. If you cannot connect, verify the

• Exadigm GT IPSec, GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 5 of 13 Rev. 1/1212 2.1 Tunnel Configuration The IPsec parameters will need to be added according to the specific Adaptive Security Appliance (ASA). Click the Add button to configure the parameters. The above configuration should be set according to the ASA being used.

• Exadigm GT IPSec, GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 6 of 13 Rev. 1/1212 3.0 Cisco ASA Settings 3.1 Network Diagram 3.2 Cisco ASA Configuration My Subnet will be set to the default DNS for the GT. The Peer Address is the external interface address and the Peer Subnet is the internal address. Once the configuration is set click on Apply.

• GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 7 of 13 Rev. 1/1212 3.3 Cisco ASA Configuration ASA Version 8.4(2) ! hostname asa2 domain-name exadigm.com enable password /xxxxxxxxxxxxxxxx encrypted passwd xxxxxxxxxxxxxxxx encrypted names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2

• GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 8 of 13 Rev. 1/1212 mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat (inside,any) source static obj-192.168.166.0 obj-192.168.166.0 destination static obj-192.168.155.0 obj-192.168.155.0 no-proxy-arp ! object network obj_any

• Exadigm GT IPSec, GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 9 of 13 Rev. 1/1212 telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept tunnel-group 166.142.29.80 type ipsec-l2l tunnel-group 166.142.29.80 ipsec-attributes ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map p

• Exadigm GT IPSec, GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 10 of 13 Rev. 1/1212 4.0 NetGear VPN Settings 4.1 Network Diagram 4.2 NetGear VPN Configuration My Subnet will be set to the default DNS for the GT. The Peer Address is the external interface address and the Peer Subnet is the internal address. Once the configuration is set click on Apply.

• Exadigm GT IPSec, GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 11 of 13 Rev. 1/1212 4.3 NetGear ProSafe VPN Screen NetGear will display the following information on their VPN setup screen. Figure 1 – page 1 of NetGear VPN setup

• Exadigm GT IPSec, GT IPsec Setup Guide © 2012 ExaDigm, Inc. Page 13 of 13 Rev. 1/1212 Figure 3 – page 3 of NetGear VPN setup 5.0 IPsec Tunnel Listing A listing of configured Tunnels will appear. In this screen you can add new tunnels. An existing tunnel may be deleted, modified or details viewed.

Related Products and Documents (Network Card):

Comparable Devices:

Similar Resources:

• poly-planar IMR-2 (1 pages) 520 McCormick Drive, Suite F, Glen Burnie, MD 21061 Phone: 410 761-4000 Fax: 410 761-6274 www.polyplanar.com IMR- 2 Wired Remote Supplement Instructions for CMR-60 extension cables. The MRD-60 requires a pull up resistor when using the MRR7 with 60 Ft., or more, extension cable length. A Pull up resistor Poly Planar # CMR-P is available for the Expa …

• ZyXEL Communications G-4100 (93 pages) G-4100 v2802.11g Wireless Hotspot GatewayQuick Start GuideVersion 1.00 7/2006 Edition 1Copyright © 2006 ZyXEL Communications Corporation. All rights reserved.ENGLISH 2DEUTSCH 13ESPAÑOL 25FRANÇAIS 37ITALIANO 48РУССКИЙ 59SVENSKA 71繁體中文 83 …

• Edimax HP-8501 (20 pages) EDIMAX HP-8501 Quick Installation Guide HP-8501 85Mbps Powerline Ethernet Bridge User’s Manual …

• Delta Electronics Digital I/Oextension Unit DVP-ES/EX (1 pages) 3-PHASE, 3-WIRE FILTERSSERIESELECTRICAL SCHEMATICCOMPONENTSMECHANICAL CONSTRUCTIONNEILL2CyAL1CyDCxL1L1CyR R RCx CxL2L2OLINTRODUCTIONS1. Applications: Electric equipment, UPS, machine tool, copy machine, automation equipment, robot, AC motor drive2. Voltage rating: 440VAC3. Operating frequency: 50/60Hz MINIMUM INSERTION LOSS IN dB 0.012MAX.A4.5(2X)JDMAX.EF …

• Panasonic MAZWxxxH Series (4 pages) Zener Diodes1Publication date: October 2008 SKE00019BEDThis product complies with the RoHS Directive (EU 2002/95/EC).MAZWxxxH SeriesSilicon planar typeFor surge absorption circuit■ Features•Two elements anode-common type•SSSMini type 3-pin package■ Absolute Maximum Ratings Ta = 25°CParameter Symbol Rating UnitTotal power dissipation *PT150 mWJuncti …

• Panasonic 2SD1819A (3 pages) Transistors1Publication date: April 2003 SJC00226BED2SD1819ASilicon NPN epitaxial planar typeFor general amplificationComplementary to 2SB1218A■ Features• High forward current transfer ratio hFE• Low collector-emitter saturation voltage VCE(sat)• S-Mini type package, allowing downsizing of the equipment andautomatic insertion through the tape pacing …

Comments, Questions and Opinions: