Comtrend Corporation VG-8050 Operation & User’s Manual

Text of Comtrend Corporation VG-8050 User Guide:

• 35 5.4.3 DMZ Host The DSL router will forward IP packets from the WAN that do not belong to any of the applications configured in the Virtual Servers table to the DMZ host computer. To Activate the DMZ host, enter the DMZ host IP address and click Save/Apply. To Deactivate the DMZ host, clear the IP address field and click Save/Apply.

• Comtrend Corporation VG-8050, 4 6.2 SECURITY ...................................................................................................................................... 70 6.2.1 WPS ................................................................................................................................ 73 6.3 MAC FILTER ................................................................................................................................. 77 6.4 WIRELESS BRIDGE ......................................................................................................................... 78 6.5 ADVANCED

• Comtrend Corporation VG-8050, 111 Appendix B – Pin Assignments ETHERNET Ports (RJ45) Pin Definition Pin Definition 1 Transmit data+ 5 NC 2 Transmit data- 6 Receive data- 3 Receive data+ 7 NC 4 NC 8 NC

• Comtrend Corporation VG-8050, 56 Field Description Tunnel Name A name for the tunnel. Mechanism The mechanism that is using the tunnel. Now, only DS-Lite is supported. Associated WAN Interface The WAN interface that would sustain the tunnel. Associated LAN Interface The LAN interface that would use the tunnel to forward the packets. Remote IPv6 Address The peer of the tunnel.

• Comtrend Corporation VG-8050, 45 5.7 Routing This option allows for Default Gateway, Static Route, Policy Routing, and IPv6 Static Route configuration. NOTE: In bridge mode, the RIP screen is hidden while the Default Gateway and Static Route configuration screens are shown but ineffective. 5.7.1 Default Gateway Select a WAN Interface as the default gateway and click Save/Apply. NOTE: After enabling the Automatic Assigned Default Gateway, the device must be rebooted to activate the assigned default gateway.

• Comtrend Corporation VG-8050, 61 The following table is provided for your reference. Field Description Certificate Name A user-defined name for the certificate. Common Name Usually, the fully qualified domain name for the machine. Organization Name The exact legal name of your organization. Do not abbreviate. State/Province Name The state or province where your organ ization is located. It cannot be abbreviated. Country/Region Name The two-letter ISO abbreviation for your country. IMPORT C

• 43 5.6.2 URL Filter This screen allows for the creation of a filter rule for access rights to websites based on their URL address and port number. Tick the Exclude radio button to deny access to the websites listed. Tick the Include radio button to restrict access to only those listed websites. Click Add to display the following screen. Select

• 66 MLD Configuration Field Description Default Version Define IGMP using version with video server. Query Interval The query interval is the amount of time in seconds between IGMP General Query messages sent by the router (if the router is the querier on this subnet). The default query interval is 125 seconds. Query Response Interval Th

• Comtrend Corporation VG-8050, 53 Click the Add button to display the following. Field Description Tunnel Name A name for the tunnel. Mechanism The mechanism that is using the tunnel. Now, only 6RD is supported. Associated WAN Interface The WAN interface that would sustain the tunnel.

• Comtrend Corporation VG-8050, 60 5.13 Certificate A certificate is a public key, attached with its owner’s information (company name, server name, personal real name, contact e-mail, postal address, etc) and digital signatures. There will be one or more digital signatures attached to the certificate, indicating that these entities have verified that this certificate is valid. 5.13.1 Local CREATE CERTIFICATE REQUEST Click Create Certificate Request to generate a certificate-signing request. The certificate-signing request can be submitted to the vendor/ISP/ITSP to apply for a certificate. Some information must be included in the certificate-signing requ

• Comtrend Corporation VG-8050, 2 Technical support If you find the product to be inoperable or malfunctioning, please contact a technical support engineer for immediate service by email at [email protected] This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See

• Comtrend Corporation VG-8050, 129 BRIDGE PPPOE FRAMES BETWEEN WAN AND LOCAL PORTS (This option is hidden when PPP IP Extension is enabled) When Enabled, this creates local PPPoE connections to the WAN side. Enable this option only if all LAN-side devices are running PPPoE clients, otherwise disable it. The VG-8050 supports pass-through PPPoE sessions from the LAN side while simultaneously running a PPPoE client from non-PPPoE LAN devices. ENABLE IGMP MULTICAST PROXY Tick the checkbox  to enable Internet Group Membership Protocol (IGMP) multicast. This protocol is used by IPv4 hosts to report their multicast group m

• Comtrend Corporation VG-8050, 13 STEP 4: Click OK to submit these settings. 3.3 Login Procedure Perform the following steps to login to the web user interface. NOTE: The default settings can be found in section 3.1 . STEP 1: Start the Internet browser and enter the default IP address for the device in the Web address field. For example, if the default IP address is 192.168.1.1, type http://192.168.1.1. NOTE: For local administration (i.e. LAN access), the PC running the browser must be attached to the Ethernet, and not nec

• Comtrend Corporation VG-8050, 3 Table of Contents CHAPTER 1 INTRODUCTION ........................................................................................................... 5 1.1 FEATURES .................................................................................................................................. 5 1.2 APPLICATION ................................................................................................................................. 6 CHAPTER 2 INSTALLATION ............................................................................................................. 7 2.1 HARDWARE SETUP ..................................

• Comtrend Corporation VG-8050, 70 6.2 Security The following screen appears when Wireless Security is selected. The options shown here allow you to configure security features of the wireless LAN interface. Click Apply/Save to implement new configuration settings. WIRELESS SECURITY Wireless security settings can be configured according to Wi-Fi Protected Setup (WPS) or Manual Setup. The WPS method configures security settings automatically

• Comtrend Corporation VG-8050, 24 5.2 WAN Service This screen allows for the configuration of WAN interfaces. Click the Add button to create a new connection. For connections on ATM or ETH WAN interfaces see Appendix G. ETH and ATM service connections cannot coexist. In Default Mode, up to 8 WAN connections can be configured; while VLAN Mux and MSC Connection Modes support up to 16 WAN connections. Heading Description Interface Name of the interface for WAN Description Name of the WAN connection Type Shows the connection type Vlan8021p VLAN ID is used for VLAN Tagging (I

• Comtrend Corporation VG-8050, 7 Chapter 2 Installation 2.1 Hardware Setup Follow the instructions below to complete the hardware setup. BACK PANEL The figure below shows the back panel of the device. Power ON Press the power button to the OFF position (OUT). Connect the power adapter to the power port. Attach the power adapter to a wall outlet or other AC source. Press the power button to the ON position (IN). If the Power LED displays as expected then the device is ready for setup (see section 2.2 LED Indicators). Caution 1: If the de

• Comtrend Corporation VG-8050, 75 Step 6: First method: WPS button Press the WPS button on the front panel of the router. The WPS LED will blink to show that the router has begun searching for the client. Second method: WUI virtual button Select the Push-Button radio button in the WSC Setup section of the Wireless Security screen, as shown in A or B below, and then click the appropriate button based on the WSC AP mode selected in step 2. A - For Configured mode, click the Add Enrollee button. B - For Unconfigured mode, click the Config AP button. Step 7: Go to your WPS wireless client and activate the push-button function. A typical WPS

• 138 After clicking Apply/Save, the new service should appear on the main screen. To activate it you must reboot. Go to Management  Reboot and click Reboot. NOTE: If this bridge connection is your only WAN service, the VG-8050 will be inaccessible for remote management or technical support from the WAN.

Related Products and Documents (Wireless Router):

Comparable Devices:

Similar Resources:

• D-Link DVG-N5402SP (11 pages) 1 Quick Installation Guide DVG-N5402SP VoIP Router Check Your Package Contents User Manual can be found at http://www.dlink.com.sg/support/ DVG-N5402SP VoIP Router Ether (CAT5 UTP) Cable 12VDC, 2A Power Adapter Using a power adapter with a different voltage rating will damage this product and void the warranty. …

• Accelerated 6200-FX (16 pages) © 2015 Accelerated Concepts Intellectual Property. All rights reserved. Accelerated Concepts, the Accelerated logo and all other Accelerated Concepts marks contained herein are trademarks of Accelerated Concepts. All other marks contained herein are the property of their respective owners. Images are shown for illustrative purposes only; individual experi …

• NetComm NF7 (5 pages) 1Conguration GuideNetcomm NF7IMPORTANT MESSAGEYour router has been pre-configured, you do not need tofollow each step of the set-up guide but should retain thisdocument in case you need to manually configure yourequipment.To configure your PC/Laptop with your wireless password including changing your wireless password, please proceed to step 4.Contents …

• Cisco Linksys E900 (2 pages) Key features:*• High speed (up to 300 Mbps) for fast wireless transfer rates• Reliable range with MIMO antenna technology• Four Ethernet ports to connect wired devices to the networkConnect to the Internet in minutesIdeal for:• Sur ng the web and emailing• Networking smaller homes or apartments• Connecting devicesLinksys E900 I Wireles …

• Polycom VVX500 (4 pages) Need more information? Navigate to your phones Support page from support.polycom.com/voice.Package ContentsVVX 500 or VVX 600 PhoneOptional AccessoriesFor more information, contact your reseller.AC Power Cord and AdapterNetwork Cable Quick Start Guide® ®VVX 500 and VVX 600 Handset and CordQuick Start GuidePhone Stand® ®Polycom VVX 500 Business Med …

• Microsoft XGX-00038 - 360 Arcade Game Console (24 pages) Black only 1englishWarning Failure to properly set up, use, and care for the Xbox 360 video game and entertainment system can increase the risk of serious injury or death, or damage to the Xbox 360 video game and entertainment system. Read this manual and the manuals of any accessories for important safety and health information. Keep all manuals for futu …

Comments, Questions and Opinions: