Manualios.com

Converters.TV 702 Operation Manual

Converters.TV 702 Manual Online:

4.55, 734 votes
Converters.TV 702 User Manual
Converters.TV 702 User Guide
Converters.TV 702 Online Manual

Text of Converters.TV 702 User Guide:

  • Converters.TV 702, Introduction This is a 10 inch LCD SVGA input monitor for the majority of arcade machines and CNC machinery retrofits. It features the VESA plug & play system which allows the monitor to automatically adjust itself to the match the frequency of the user's device. Features • High brightness. • Fast response time. • Power saver. • Low electromagnetic wave and power saver. • Safety certifications. Power Saver • The power control system is installed inside the LCD monitor. • If the monitor has not been used for a certain period of time, the system

  • Converters.TV 702, Setting up your LCD monitor Screen Adjustment To enter adjust mode, please refer to the OSD control. • Turn the computer and LCD monitor on. • Press “Auto” button to start auto adjust. • This will start the auto adjust process. This will take approximately 10 seconds. You may notice the image changing and occasionally flashing (this is normal). • Your LCD monitor provides a self testing function, through which you can check whether the LCD monitor functions are working properly. • If your LCD monitor is properly connected, but there is no image showing and the indicator lights up in

  • Converters.TV 702, Panel Controls 1. LED Green : Power On + Signal Source Detected Red : Standby or Signal Source Not Detected Off : Power off 2. Power Power On/Off. 3. Up/+ This button is used for positive adjustment when OSD is Displayed 4. Down/- This button is used for negative adjustment when OSD is Displayed 5. Menu This button is used to display the ON Screen Display (OSD) menu and select settings and parameters. 6. Auto Automatically optimize positions, phase and clock when OSD is not shown.

  • Adjusting the Image • Press the menu button to start the OSD feature. • Click the “Up” or “Down” button to select the function to be adjusted. • Click the “Menu” button to access into the function to be adjusted. • Click the “Up” or “Down” button to change the current setting of the function selected. • To exit the OSD menu or go back to a pre

  • Converters.TV 702, OSD Menu Options Menu Auto Setup Automatically optimize positions, phase and clock Brightness Brightness Adjust Screen Brightness Recall Restore to Default Return Exit menu Contrast Adjust the Screen Contrast Display Adjust H Position Adjust the Horizontal Positioning V Position Adjust the Vertical Positioning V Size Adjust the Vertical Screen Size Clock Adjusts horizontal alignment Phase Adjusts horizontal alignment Quality Adjusts the quality of the image Mode Selection Default Analog VGA in Recall Restore to Default Return Exit m

  • Converters.TV 702, OSD Display OSD H-Pos Position the OSD menu horizontally on screen OSD V-Pos Position the OSD menu vertically on screen OSD Timer Set the OSD menu on screen display time OSD Transparency Set the OSD menu Transparency OSD Direction Set the direction of the OSD menu : Normal, Mirror, Left, Right, Up or Down Display Logo Display Logo Recall Restore to Default Return Exit Menu VGA/DVI Analog Input Selects VGA input Digital Input Unavailable Return Exit Menu Audio Audio Mute Audio Volume Adjust the volume Recall Restore to default Return Exit menu Read me Quick start Guide Recall Restore to default

  • Converters.TV 702, Support CGA/EGA/VGA Timings Type H. Frequency. (kHz) V. Frequency (Hz) Resolution CGA 15.4 58.8 640x198 CGA 15.1 57.6 640x215 CGA 15.7 60 640x215 CGA 16.0 61 640x215 CGA 16.3 62 640x215 CGA 16.6 63.4 640x215 CGA 16.800 64 640x215 CGA 15.6 50.3 640x265 CGA 18.4 50 640x350 VGA 31.469 70.087 640x400 VGA 31.469 59.940 640x480 VGA 35.000 66.667 640x480 VGA 37.861 72.809 640x480 VGA 37.500 75.000 640x480 SVGA 35.156 56.250 800x600 SVGA 37.879 60.317 800x600 SVGA 48.077 72.188 800x600 SVGA 46.875 75.000 800x600 XGA 48.363 60.004 1024x768 XGA 48.78 59.561 1024x768 XGA 56.476 70.069 1024x768 XGA 60.023 75.029 1024x768 SXGA 47.732 60.024 1280x768 SXG

  • Converters.TV 702, Connecting into Option 1 - Using VGA Input Monitor By using a standard VGA 15 pin computer cable plug and play or, alternatively you may cut the end of your cable and wire directly to the output connector of the source equipment. Pin 1 Analog red input. Pin 2 Analog green input. Pin 3 Analog blue input. Pin 4 Ground. Pin 5 Digital ground. Pin 6 Analog red ground. Pin 7 Analog green ground. Pin 8 Analog blue ground. Pin 9 Ground. Pin 10 Sync ground. Pin 11 Ground. Pin 12 SDA (DDC Data). Pin 13 H. Sync or H + V Sync. Pin 14 V. sync. Pin 15 SCL (DDC CLK). Option 2 - RGB wiring via Adapter PCB The PCB interface board is designed to facilitat

  • P1 – RGBHV separate/or combined sync P3 – RGBH+V combined sync Pin 1 – Red Pin 1 – Red Pin 2 – Green Pin 2 – Green Pin 3 – Blue Pin 3 – Blue Pin 4 – Signal Earth Pin 4 – Signal Earth Pin 5 – Horizontal/Combined Sync Pin 5 – Horizontal/Combined Sync Pin 6 – Vertical Sync About Our Adapter PCB and Further Adjustments Our adapter PCB o

  • Filter Jumpers Set Jumpers as required to reduce effect of black line artifacts when low resolution mismatch becomes evident on LCD screen. By setting to “ON” position, each colour can be filtered as required. . C1 = Red Colour 1 | C2 = Green Colour | To adjust for C3 = Not used | Impedance C4 = Blue colour | Matching of

  • Converters.TV 702, Specifications Specifications for this Model Screen Size 10.4" TFT Pixel Pitch(mm) 0.264 x 0.264 Blacklight 2xCCFL Cell Type TN Input Mode SVGA Scan Frequency Horizontal 15 ~ 80KHZ Scan Frequency Vertical 48 ~ 75Hz Colours 16.7M Colors Aspect Ratio 5:4 Horizontal Viewing Angle Full range Optimal Screen Resolution 800 x 600 Bandwidth 130MHz Dot Clock Contrast Ratio 500:1 Typ Brightness 250cd/m2 Power 100~240V 50/60Hz via 12VDC 1.2A adapter Power Consumption 10.725W Management Vesa-Dpms 42 watts Power down mode </=3 Watts Function Keys 5 PC Interface Analog Interface Signal Cabl

  • Converters.TV 702, Troubleshooting Error Solution No Power Led Check Mains Power supply input Voltage (100v or 240vAC) and connection Check 12V DC at power supply output Check control board for damage No image Check cables connected correctly from source and into monitor inputs Check correct orientation of signal wires; H-sync and V-sync Check for CCFL lamp operation on rear of lcd panel, visual reference only Check power 'on' source and monitor Image Alignment Adjust using “AUTO” button Fine adjust u

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Kiyo GPS M1 Operation & user’s manual kiyo/gps-m1-292.pdf 15 Nov 2022 12
2 Omega 871A Operation & user’s manual omega/871a-LJZ.pdf 06 Jan 2023 24
3 CTEK BATTERY ANALYZER Manual  ctek/battery-analyzer-6W3.pdf 15 Mar 2024 4
4 Samsung LD220Z Operation & user’s manual samsung/ld220z-WNH.pdf 07 Sep 2023 48 1.7 Mb
5 Bionaire BAP830 Instruction manual bionaire/bap830-85X.pdf 12 Jun 2023 25 1.55 Mb
6 SIC DVR Operation & user’s manual sic/dvr-A56.pdf 19 Jan 2023 105

Similar Resources:

  • Philips

    191E2SB1

    (3 pages)
    PhilipsLCD monitor with Touch Control18.5''w (47 cm) E-lineHD191E2SB1Slim, attractive HD display offers great valueWith a slim, attractive design this new generation 191E2 HD display with SmartContrast and SmartImage Lite is a great choice for all your needsGreat picture quality• Ready to display HD content• 16:9 display for best widescreen ga …
  • urmet domus

    Note 2 1723/71

    (128 pages)
    DS 1723-001A LBT 20298Mod.1723KIT VIDEOCITOFONICO A 2 FILI MONO E BIFAMILIARE 7” VIVAVOCE A COLORI ONE- AND TWO-HOUSEHOLD KIT WITH PANEL AND COLOUR 7” HANDS-FREE MONITORKIT VIDEO 2 FILS MONO/BI-FAMILLE 7” MAINS-LIBRES COULEURKIT VIDEOINTERFÓNICO DE 2 HILOS MONO Y BIFAMILIAR 7” MANOS LIBRES COLOR2-DRAHT-VIDEOSPRECHANLAGE-KIT FÜR EIN- UND ZWEIFAMILIE …
  • SWEEX

    IA101

    (81 pages)
    English version454512345678 90MENUCHVOLOKSETNORGUIDEBACKUPFREEZEEXITTXTTVSUBTITLESLOWANGL E DISP LAY+-TV1TV2SAT1SAT2VCRCDDVDAUX---AVYour wise selection of our product is deeply appreciated. is the latest type of theMulti-function Remote Controller. By simplysetting up the Remote Controller, most householdelectronic appliances, such as TV , VCR, SAT, DVDca …
  • ViewSonic

    VS16523

    (25 pages)
    VX2478-smhdDisplayUser GuideModel No. VS16523IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also fou …
  • Eizo

    FLEXSCAN L550

    (2 pages)
    43 cm (17")COLOR LCD MONITORSTREAMLINED DESIGNThe design is simple and compact with space-saving slimbezels, internal power supply, and a folding stand. The standmoves in and out to vary the screen angle for quick adjustment tothe most comfortable viewing position. Plus, it does not have tobe removed for mounting with optional stands or arms, as withcon …
  • eMachines

    E15T

    (11 pages)
    1 ENGLISH Table of Contents 1. Caution and Warning.............................................................................................................. 2 2. FCC Requirements................................................................................................................. 3 3. Product Safety Precautions........................... …

Comments, Questions and Opinions: