Manualios.com

Converters.TV CCQ-30 Operation Manual

Converters.TV CCQ-30 Manual Online:

4.15, 1527 votes
Converters.TV CCQ-30 User Manual
Converters.TV CCQ-30 User Guide
Converters.TV CCQ-30 Online Manual

Text of Converters.TV CCQ-30 User Guide:

  • Converters.TV CCQ-30, Security System Colour Quad Processor (CCQ-30) Operation Manual Please browse our online catalogue to view our full product range. 44-48 Maitland Road, Mayfield East, NSW, 2304 Australia, [email protected] Phone +61 249689313 Fax +61 249689314 www.converters.tv

  • Converters.TV CCQ-30, Introduction This unit can receive, display and record video signals from 8 different NTSC/PAL video systems at the same time. With a built-in time base corrector (TBC), no special camera equipment or synchronization is needed. Precautions 1. Do not expose this product to direct sunlight. 2. Keep the unit away from radiator, heat sources and magnetic field. 3. Do not place it in very dusty or humid locations. 4. Use this unit in a horizontal position only. 5. Do not put heavy objects on top of the converter. 6. Put the unit in an open space that has good ventilation. 7. If the unit is acting abnormally keep the unit away from TV or other electronic equipment. 8. Unplug the unit

  • Converters.TV CCQ-30, Operation controls and functions Front Panel 1. Power- This is the On/Off power indicator light. It will illuminate when the power has been turned on. 2. Zoom/Reset- This button provides two functions: LED indicator lights up under normal operation and 2 x 2 zoom display, combination with button activates 4 channels selection to zoom or freeze mode. During menu set-up, pressing this button resets the previous adjustment to their default value; while pressing the button continuously for 4 seconds resets all the parameters to their default values. 3. Auto/Zoom F- Led indicator will light up under normal operation and perform auto sequential switc

  • B. During Zoom playback mode, button press sets LED ON to view at 2 x 2 zoom display; another button press FREEZES screen display. C. During picture adjustment these keys are used to move cursor position and adjust parameters. 6. Menu/Exit- Press “Enter” to set menu choice. If the button is pressed again the menu set-up will be exited. When security Lock

  • The Main menu screen display shows: Date/Time title Picture A and Picture B Interval sensor display Other Record 2. Date/time Setting- Move the cursor to date and time and press ENTRY. Press the up and down arrows to move the cursor to another position and press + and – to set the digits. To exit this page press the Menu/Exit button. When you have enter

  • Converters.TV CCQ-30, 6. Display Settings- Move the cursor to display and press ENTRY. Press + and – to set the Date/Time/Title/Zoom/Border On/Off. When you have entered into the display setting the following will be displayed: 7. Picture Settings- Move the cursor to Picture A or Picture B and press ENTRY. Adjust the contrast, brightness, colour and tint on 8 channels. When you have entered into the picture setting the following will be displayed: 8. Other Settings- Move the cursor to other and press ENTRY. The following dis

  • Converters.TV CCQ-30, 10. Recalling internal default- At main menu display, press button ZOOM/RESET to reset every function back to its default condition. If you continually press the ZOOM/RESET button, the system resets to its default condition. RS 232 Installation 1. Connection between 9-pin D Sub connector and PC. 2. PC operation instruction: This unit can be connected with PC by RS-232 serial port transmission. The system uses two ASCII codes to edit program. 3. The system will transmit 2-byte code to PC when operated. 4. When video loss and sensor alarm occur, the system will transmit the message to PC for security surveillance. The me

  • Converters.TV CCQ-30, Connection and Installation The AC adaptor power unit should not be plugged into a wall outlet until all connections are complete. - Connect up to 8 colour camera outputs into the camera Input ports (Number 1 and 2 on the rear panel). - Using the appropriate connector cable connect your Video device into the VCR Input port (number 3 on the rear panel). The VCR input port is for VCR playback input. - Using the appropriate connector cable connect the VCR output port (Number 4 on the rear panel) to your VCR device. The VCR Output terminal only provides Quad screen display output. - Using the appropriate connector cable connect the Video Output port

  • Converters.TV CCQ-30, Specifications Cameras video system Colour NTSC or PAL Camera Inputs BNC x 8; Composite video/ 1Vp-p 75 ohm VCR Out level 1Vp-p, 75 ohm Video out Quad (monitor) out x 2, 1 Vp-p 75 ohm VCR out x 1, 1 Vp-p, 75 ohm Title Adjustment 6 digits Time/Date Embedded time/date and power off memory. Alarm Type Video loss or sensor triggered Alarm input 8 sets Alarm Output N.O and N.C 2 sets for external use, Max, rating DC 24V, 1A. Alarm Time 1 sec. ~ 40 min. or unlimited Switching time 1 sec. ~ 99 sec. adjustable RS 232 9600 Baud, 8 bit, even parity, 1 bit stop. Sampling Rate 13.5 MHz Refresh Rate Real-time refresh rate, 25/30 fie

Related Products and Documents (Security System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Esse 500 Installation & user's instructions esse/500-9EN.pdf 18 Sep 2023 6
2 Smeg SIHP40WG4 Quick start manual smeg/sihp40wg4-B9P.pdf 20 Apr 2023 2 0.36 Mb
3 Reely Hughes Operating instructions manual reely/hughes-1RZ.pdf 16 Oct 2022 172
4 E-FLITE Celectra UMX-4 Instruction manual e-flite/celectra-umx-4-5QA.pdf 02 Feb 2023 3
5 AEG Electrolux EU 6136 U Instruction booklet aeg-electrolux/eu-6136-u-9Y7.pdf 03 May 2023 21 0.47 Mb
6 Olympus SP 550 - Ultra Zoom Digital Camera Manuel olympus/sp-550-ultra-zoom-digital-camera-73I.pdf 21 Jun 2023 96

Similar Resources:

  • Moog

    MPT-90

    (68 pages)
    MPT- 90 PAN AND TILT POSITIONER PRODUCT MANUAL …
  • Maxwell

    MaxGuard Pro

    (57 pages)
    Installation and Operating Instructions PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THIS MANUAL FOR FUTURE REFERENCE.MaxGuard Pro …
  • Satel

    SOW-300 Series

    (4 pages)
    ® SOW-300 INDOOR LED BEACON sow300_en 11/09 The SOW-300 indoor LED beacon is offered in two versions differing by the color of optical signal (red in SOW-300 R, blue in SOW-300 BL). 1. FEATURES • Optical signaling by means of super bright LEDs. • 3 selectable signaling modes. • Tamper protection against opening the housing. Fig. 1. View of the …
  • Siemens

    SINAMICS G130

    (530 pages)
    SINAMICS - Low VoltageEngineering ManualSINAMICS G130, G150, S120 Chassis, S120 Cabinet Modules, S150Supplement to Catalogs D 11 and D 21.3SINAMICS DrivesVersion Edition6.4 November 2015s© Siemens AG 2015 …
  • Tynetec

    ZXT812

    (2 pages)
    Tynetec, a business unit of Legrand Electric Ltd Cowley Road, Blyth Riverside Business Park, Blyth, Northumberland, NE24 5TF. Tel: +44 (0) 1670 352371 www.tynetec.co.uk Trusted Technology Caring for People Carbon Monoxide Alarm 869MHz Caring for People _________________________________________________________________________ __________________________ …
  • Global Fire Equipment

    Valkyrie Vox C

    (2 pages)
    TECHNICAL SPECIFICATIONSGLOBAL FIRE EQUIPMENT S.A.Sítio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z, 8150-016 São Brás de Alportel - PORTUGALTel: +351 289 896 560 • Sales: [email protected] • Technical Support: [email protected] • www.globalfire.ptValkyrie Vox CConventional Voice Sounder/BeaconORDER CODEDESCRIPTIONCONVENTIONAL VOICE …

Comments, Questions and Opinions: