HP LaserJet 4200L Series Start Manual

Text of HP LaserJet 4200L Series User Guide:

• HP LaserJet 4200L Series, 1 © 2003 Copyright Hewlett-Packard Development Company, LP Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial err

• HP LaserJet 4200L Series, English English 2 1 547 mm (21.5 inches) 1045 mm (41.1 inches) 412 mm (16.2 inches) HP LaserJet 4200L series HP LaserJet 4200L series 2 WARNING! The printer is heavy. To prevent physical injury, two people should lift and move the printer. Prepare the location. Place the printer in a well-ventilated room on a sturdy, level surface. Allow space around the printer, including 2 inches (50 mm) of space around the printer for ventilation. Make sure that the location has an adequate power supply. Check the voltage rating on your printer (located under the top cover). The power supply will be either 110 to 127 Vac or 220 to 240 Vac, 50/60 Hz. Regulate the environment. Do not place the

• English English 3 3 1 2 3 5 4 4 5 6 2 3 1 7 4 8 9 13 12 11 10 14 Check the package contents. Make sure that all the parts are included. 1) Printer; 2) Right-angle power cord; 3) Control panel overlay (This part might already be installed on the printer.); 4) Print cartridge 5) Software and documentation on CD-ROM. Identify printer parts. Front view: 1) Co

• HP LaserJet 4200L Series, 4 5 2 3 6 4 5 Remove the packing materials. 1) Remove the shipping bag and any orange tape from the front and back of the printer. 2) Open the printer top cover and remove the foam packing material inside. 3) Remove the plastic film from the control panel display. 4) Open tray 1 and remove the orange sheet. 5) Open tray 2 and remove all orange tape and packing materials. 6) Close both trays. Note: Save all the packing material. You might need to repack the printer at a later date. Install the print cartridge. 1) Remove the print cartridge from its packaging. 2) Bend and then pull the sealing tab

• HP LaserJet 4200L Series, English English 5 1 3 2 4 7 5 6 8 1 3 2 Install any optional accessories. Use the separate installation instructions to install any accessories that you have purchased with the printer. 1) EIO accessories; 2) Hard disk; 3) 500-sheet feeder*; 4) Memory DIMM, flash DIMM, or font DIMM; 5) Duplexer for two-sided printing; 6) Storage cabinet *The printer supports a maximum of one optional feeder. Load Tray 2. (For information about loading other trays, see the use guide on the CD-ROM.) 1) Pull tray 2 completely out of the printer. 2) Pinch the release on the left guide and slide the guides to the correct paper size. 3) Pinch the release on the rear paper guide and slide it to the corr

• HP LaserJet 4200L Series, 6 4 5 9 1 4) Rotate the blue knob on the right side of the tray to the correct paper size. (Turn the knob to “STANDARD” for LTR, A4, LGL, EXEC, A5, and JIS B5 paper sizes, or to “CUSTOM” for custom paper sizes.) 5) Load paper into the paper tray with the top edge of the paper facing the front edge of the tray. Make sure that the paper is flat at all four corners and that the top of the stack is below the maximum-height indicators. CAUTION: Do not fan the paper. Fanning can cause misfeeds. 6) Slide the tray back into the printer. Connect an interface cable. To connect the printer directly to a computer: 1) Connect an IEEE 1284-compliant (size “B”) parallel

• English English 7 10 2 11 12 Connect the right-angle power cord. 1) Check the voltage rating on your printer (located under the top cover). The power supply will be either 110 to 127 Vac or 220 to 240 Vac, 50/60 Hz. (This is the second time you are checking the voltage.) 2) Make sure the power switch is in the off (“0”) position. 2) Connect the right-angle power cord

• 8 13 14 15 Set the control panel language. Use the (Up arrow) and (Down arrow) to scroll to a language you want and press (Select) to select it. (To change the language after it has been set, see the use guide on the CD-ROM). Test the printer. To verify that the printer is operating correctly, print a configuration page. 1) Press (Select) to en

• HP LaserJet 4200L Series, English English 9 16 17 18 Test the software installation. Print a page from any program to make sure the software is correctly installed. Note: If installation fails, reinstall the software. If reinstallation fails, see the Readme on the CD-ROM, see the support flyer that came in the printer box, or visit http://www.hp.com. In the Select your country/region field at the top, select your country/region and click . Click the Support block. Register your printer. Register your printer to receive important support and technical information. You can register at: http://www.register.hp.com. Congratulations. Your printer is ready to use.

More Instructions:

	HP LaserJet 4200L Series Install manual 19-11-2023 52	DOWNLOAD
	HP LaserJet 4200L Series Quick start manual 28-11-2022 20	DOWNLOAD
	HP LaserJet 4200L Series Supplementary manual 02-08-2022 52	DOWNLOAD
	HP LaserJet 4200L Series Install manual 25-04-2023 52	DOWNLOAD

Related Products and Documents (All in One Printer):

Comparable Devices:

Similar Resources:

• Xerox 8560/SDN - Phaser Color Solid Ink Printer (2 pages) Phaser® 8560color printerwww.xerox.com/office/8560PsupportInstallationGuideUSBEthernet001-1792-00 Rev ACopyright © 2007 Xerox Corporation. All rights reserved.2.12.252.328 kg60 lb.2.410 cm(4 in.)90 cm(35 in.)60 cm(24 in.)56 cm(22 in.)10 cm(4 in.)20 cm(7.5 in.)40 cm(15.5 in.)60 cm(24 in.)< 1.2 cm (.5 in.)Use GuideQuickUse GuideQuick4.24.33.1A/B USB3.2 3. …

• Lexmark E360dtn (5 pages) Lexmark™ E360Clearing Jams GuideClearing jamsAvoiding jamsThe following hints can help you avoid jams:• Use only recommended paper or specialty media. For moreinformation, see the User's Guide.• Do not load too much paper. Make sure the stack height doesnot exceed the indicated maximum heig's ht.• Do not load wrinkled, creased, damp, bent, …

• Lexmark C746 (5 pages) Connection GuideSupported operating systemsUsing the Software and Documentation CD, you can install the printer software on the following operating systems:• Windows 7• Windows Server 2008 R2• Windows Server 2008• Windows Vista• Windows Server 2003• Windows XP• Mac OS X version 10.5 or later• Red Hat Enterprise Linux WS• openSUSE Linux• S …

• Ricoh Aficio CL5000 (2 pages) 1Instructions for Using This FinisherBy installing this product on your printer, you will be able to collate and stapleoutput.This manual describes instructions for using the Finisher. Please read it carefullybefore using this machine.❖If the printer and the computer are not configured for bidirectional transmission, besure to configure the appropriate opt …

• HP 8550DN (52 pages) EN Chapter contents 191Product informationChapter contentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Printer features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Electrical specifications . . …

• HP Deskjet 6520 Series (201 pages) 1 HP Deskjet 6500 series printersTo find an answer to a question, click the appropriate topic below:HP Deskjet 6540-50 seriesHP Deskjet 6520 series• Notices• Special features• Getting started• Connecting to the printer• Printing photos• Printing other documents• Printing tips• Printer software• Maintenance• Troubleshooting• Optional ac …

Comments, Questions and Opinions: