NPC Network Phone Camera Operation & User’s Manual

Text of NPC Network Phone Camera User Guide:

• NPC Network Phone Camera, Network Phone Camera User Manual 2 Read and understand thoroughly this safety awareness & instruction before using and keep it for future reference, the device is called NPC in this text. Safety Precaution: Do not place heavy object on the NPC. Do not let any solid or liquid fall into or infiltrate the NPC. Do not disassemble, repair or replace the parts of the NPC by yourself . Using environment: Please place and use the NPC between 0℃ and 40 ℃.Avoid direct sunlight or stay away from heat. Do not install the NPC in damp environment. Do not expose the NPC in smoky or dusty environment. Do not dr

• NPC Network Phone Camera, Network Phone Camera User Manual 3 Contents Contents...................................................................................................................................................................3 1 Product Introduction..........................................................................................................................................4 1.1 Product overview ..........................................................................................................................................4 1.2 Main fuctions..........................................

• NPC Network Phone Camera, 第 4 页 1 Product Introduction 1.1 Product Overview The NPC series is a type of excellent intelligent home product specially designed for digital field. It introduces embedded LINUX operating system which is more stable. It introduces the technology of standard H.264 mp video compression format and G.711A audio compression format which insure the high-quality image, low-bit rate and single-frame playing. It introduces Cloudlink P2P network transmission technology which achieves strong network data transmission ability and remote control ability. It introduces wireless

• NPC Network Phone Camera, Network Phone Camera User Manual 5 2 Open-package inspection and cable connection 2.1 Open package check First, please check whether there is any visible damage to the package appearance. The protective material used for the package of the NPC can sustain most accidental clashes during the transportation. Then, please open the box and get rid of the plastic protective coating. Check whether there is any visible damage to the NPC appearance. 2.2 The front panel and rear panel The key f

• NPC Network Phone Camera, Network Phone Camera User Manual 7 The front button operation function Num Button name Mark Function 1 Number button 0 00 0- -- -9 99 9  Input the number key during user input state  Short press to decrease the volume during video call or playing state  Short press to delete text during edit state 2 */.键 键键 键  Long press to record/stop recording during manual record mode  Short press to increase the volume during video call or playing state  Short press to switch input method during edit state 3 Ctrl shift/ defense  Long press to do defense/cancel operation

• NPC Network Phone Camera, Network Phone Camera User Manual 8 menu/confirm key  Enter main menu 2.4 The rear panel ○ ,1Network interface ○ ,2WIFI ant interface ○ ,3Learning code indicator ○ ,4Learning button ○ ,5Power switch ○ ,6Power interface ○ ,7USB interface ○ ,83C smart card interface ○ ,9Micro SD card interface ○ ,10Earphone interface

• NPC Network Phone Camera, Network Phone Camera User Manual 9 3 Basic operation 3.1 Turn on Plug the power supply and turn on the power supply switch to “ON”, the NPC enters the system. Suggest using the stable input voltage and power input ripple with less interference to make sure the NPC power supply. Suggest using the UPS to protect the power supply under allowable conditions 3.2 Turn off Check and confirm the recording is stopped before turn off the NPC, turn off the power supply switch to “OFF”, or pull the rear panel power switch that can switch power. Auto resu

• NPC Network Phone Camera, Network Phone Camera User Manual 10 Picture 3.1 Login interface Icons meaning under standby state: 1 11 1 USB detection icon 2 22 2 Micro SD detection icon 3 33 3 Motion detection icon 4 44 4 3C smart card detection icon 5 55 5 WIFI connection icon 6 66 6 Internet connection icon 7 77 7 Sever abnormal connection icon

• Network Phone Camera User Manual 11 4 Main menu Press button , the system main menu is shown as below. You can operate and set each function in this menu. Picture 4.1 Main menu interface 4.1 Main menu navigation Main menu Function Overview General Set the basic parameters of the system System Update and maintain system and show relat

• NPC Network Phone Camera, Network Phone Camera User Manual 12 4.2 General setup Picture 4.2 General setup interface Set the basic parameters of the system, please click [main menu]> [general] to enter the general setup interface. 【 【【 【Time setup】 】】 】 Set the system date and time. 【 【【 【Language setup】 】】 】 Set the system language . 【 【【 【Video format】 】】 】 According to PAL or NTSC used in different areas, set the video format of the system. 【 【【 【Access password】 】】 】 Set the password of network remote monitor, the pass

• NPC Network Phone Camera, Network Phone Camera User Manual 13 Picture 4.3 System setup interface 【 【【 【Restore factory】 】】 】 Restore system to factory setting. 【 【【 【System update】 】】 】 You can update and maintain the system when there is system software need to be updated. There are two ways: local update and cloud update. Local update: Copy the update file to U disk or Micro SD card, then insert U disk or Micro SD card, Press update button and then press button to update after system detect the update file, the system will reboot up after finish updating. Could update: Under network state, press the update button ,then the system

• NPC Network Phone Camera, Network Phone Camera User Manual 14 Picture 4.4 Video retrieval 【 【【 【 Fast retrieval 】 】】 】 Enter the video playback interface, you can search system video file of the day after press search button directly. If there is no video, it will show “no video file found”. Picture 4.5 Video retrieval 【 【【 【 Accurate retrieval 】 】】 】 Move the cursor to adjust the starting and ending time, the window will pop-up the video file list which conforms to searching condition after press search button , press up-down and left-right buttons

• NPC Network Phone Camera, Network Phone Camera User Manual 15 Picture 4.6 Video retrieval 【 【【 【 Play 】 】】 】 During play state, press left-right buttons to finish fast forward and rewind operation and press up-down buttons to switch different video files. Press the button to stop playing. Press right key for single-frame playing during stop-playing state. Press button or can adjust the volume. 4.5 Network setup Set network parameters, you can click [main menu]> [network] to enter the network setup interface. Picture 4.7 Network setup

• NPC Network Phone Camera, Network Phone Camera User Manual 16 【 【【 【IP】 】】 】 Set system IP address, you can automatically or manually set the IP address. Through automatically set the IP address, system will automatic access to IP by DHCP; Through manually set the IP address, you can manually set the IP address(system will automatically determine the network segment of IP address, you only need manually set the last one of IP address. ) 【 【【 【Internet】 】】 �

• Network Phone Camera User Manual 17 Picture 4.9 Alarm setup 【 【【 【Send e-mail】 】】 】 When there is alarm or alarm linkage of capture images, you can send specific alarm information or capture images to given e-mail address . Picture 4.10 Email alarm 【 【【 【Motion detection】 】】 】 This option is turned on and when the system det

• NPC Network Phone Camera, Network Phone Camera User Manual 18 4.7 Recording setup Set different record modes, you can click [main menu]> [record] to enter the record setup interface. You can set three record modes: manual, alarm and timed. The record LED indicator will blink during record state. 【 【【 【Manual】 】】 】 Long press record button can manually control the opening and closing. Picture 4.11 Record setup（1） 【 【【 【Alarm】 】】 】 When motion detection or outside alarm triggers, system will automatically enter record

• Network Phone Camera User Manual 19 Picture 4.11 Record setup（2） 【 【【 【Timed】 】】 】 You can set the record time, system will automatically enter record state during this time. Picture 4.12 Record setup（3） 5 Remote monitor and video call 5.1 Remote monitor You need correctly connect to the network before remote monitor. For network

• NPC Network Phone Camera, Network Phone Camera User Manual 20 computer etc, click on the dial screen and enter the 3C ID as required, then click remote monitor button and the dialog box will be popped up to remind you of entering access password, you can make remote monitor to this NPC after enter correct digital passwords; If the remote monitor fails, please check whether the network of mobile device is normal. 5.2 Video call Video call between two devices Dial among WAN network: After NPC connecting to internet normally, the icon of standby abnormal

• Network Phone Camera User Manual 21 192.168.1.10 and 192.168.1.11, device A can dial “11” to make video call with device B. Using mobile devices such as cell phone or tablet computer to make video calls with the device Boot up the application after normally installing Gview client software to cell phone or tablet computer etc, click on the dial sc

• NPC Network Phone Camera, Network Phone Camera User Manual 22 6 Wireless learning code 6.1 Wireless detector learn code to match the NPC In order to trigger the alarm, all the wireless detectors must learn code to match the NPC. The specific operation as follows: First press device learning button, when the red lamp of two-color LED lights up, then trigger the wireless detector that need to be matched to transmit a signal, if the red lamp of two-color LED flashes which indicates learning is success, after the learning succeed, when the wireless detector is triggered then the red lamp of two-color LE

• NPC Network Phone Camera, Network Phone Camera User Manual 23 1.The input voltage is not stable or too low 2.The power of switch power supply is low. 3.Frontal video signal is not stable 4.Bad heat radiator or too much dust or bad running circumstance of the NPC. 5.The hardware of the NPC is damaged. System can not detect USB or Micro SD card Possible reasons are as follows: 1.The USB or Micro SD card line is not in good connection 2.The card slot is damaged 3.The storage equipment is damaged 4.The USB port of main board is damaged I can not find the video files in lo

• NPC Network Phone Camera, Network Phone Camera User Manual 24 1.It is not an active tone arm. 2.It is not an active sound box. 3.The audio lines are damaged. 4.The hardware of the NPC is damaged. The time is wrong. Possible reasons are as follows: 1.Setting is wrong. 2.The battery is in bad connection or the voltage is too low. 3.The oscillation is damaged. The motion detect is not wrong. Possible reasons

• NPC Network Phone Camera, Network Phone Camera User Manual 25 7.2 Maintenance Please use the NPC in dry environment so that the NPC can work long-term and stably. The damp dust in the circuit board will cause short-circuit which will interferes the NPC normal running or damages the NPC. Please keep the grounding well done to prevent the video or audio signal interfered and the NPC from static or inductive electricity. Please keep the NPC away from the heat resource. Please keep the NPC ventilated for better heat radiator. Please check and maintain

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• GeoVision GV-EBD2702: GV-EBD4700 (123 pages) Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.User's ManualGV-IP CameraEBD-ABL-ADR-BGV-EBD2702 / 4700 / 4711 IR Eyeball IP Dome GV-ABL2701 / 4701 IR Bullet IP CameraGV-ADR2701 / 4701 IR Mini Fixed Rugged IP Dome …

• Elvox 46216.212 (12 pages) Manuale per l’installazione e l’usoInstallation and operation manual46216.212Telecamera Bullet IR IP full HD, obiettivo 2,8-12 mm, PoEIP IR Bullet Camera, full HD, 2,8-12 mm Lens, PoE …

• GeoVision GV-ABL Series (61 pages) GV-IP CameraGV-ABL / TBL SeriesGV-ADR / TDR SeriesGV-AVD / TVD SeriesGV-BLFC5800GV-EBD SeriesGV-FER5702GV-PTZ5810-IRGV-TFD SeriesQuick Start GuideBefore attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.UBN-UM-W …

• Arecont Vision MegaDome AV3155 (2 pages) MegaDome™ SeriesThe AV3155/3155-16 MegaDome™ series network camera is part of Arecont Vision’s full line of H.264 megapixel cameras. This fully compliant implementation of H.264 (MPEG 4, Part 10) provides full 2048 x 1536 megapixel resolution at full video frame rates of 15fps. The MegaDome™ camera line provides an all-in-one solution with integra …

• Bosch NDC-265-P (2 pages) CCTV | HD 720p IP Dome Camera 200 SeriesHD 720p IP Dome Camera 200 Serieswww.boschsecurity.comThe Bosch NDC-265-P 720p IP dome camerais a ready-to-use, complete network videosurveillance system inside a compact camera.This camera brings Bosch’s high-performancetechnology into the realm of small office andretail businesses by offering a cost-effectivesoluti …

• Axis P5522/-E PTZ (4 pages) DATASHEET> Superb video quality including HDTV 1080p> Multiple H.264 video streams> Remote focus and zoom > Outdoor ready> Digital PTZ and multi-view streaming> P-Iris controlAXIS P5522/-E cameras enable users at a remote location to pan 360° for overview surveillance, tilt 180° and zoom in 18x with autofocus for detailed views. Th …

Comments, Questions and Opinions: