Manualios.com

Tgard PS-7900SI Operation & User’s Manual

Tgard PS-7900SI Manual Online:

3.75, 615 votes
Tgard PS-7900SI User Manual
Tgard PS-7900SI User Guide
Tgard PS-7900SI Online Manual

Text of Tgard PS-7900SI User Guide:

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 58 Figure 5.22 Edit Holiday Settings 2) Check the checkbox after Enable. 3) Select Mode from the dropdown list. There are three different modes for the date format to configure holiday schedule. 4) Set the start and end date. 5) Click Apply to save settings. 6) Click OK to exit the Edit interface. 4. Enter Record Schedule settings interface. Menu> Record> Schedule 1) Select Record. 2) Check the checkbox after Enable Schedule. 3) Click Edit. 4) Select Holiday from the Schedule dropdown list. Figure 5.23 Edit Schedule- Holiday 5) Select Motion from the Type dropdown list. 6) If you need all

  • User Manual of PS-7900SI/MI Series DVR 65 Note: You can’t save any files in a Read-only HDD. If you want to save files in the HDD, change the property to R/W. Note: If there is only one HDD and is set to Read-only, the device can’t record any files. Only live view mode is available. If you set the HDD to Read-only when the device is saving files in it, th

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 60 5.6 Configuring Redundant Record Purpose: Enabling redundant recording, which means saving the record files not only in the R/W (read/write) HDD but also in the redundant HDD, will effectively enhance the data safety and reliability. Note: You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to Redundant. For detailed information, please refer to Chapter 10.4 Managing HDD Group. There should be at least another HDD (NetHDD) which is in R/W mode. Steps: 1. Enter HDD Information interface. Menu> HDD Figure 5.24 HDD General 2. Select the HDD and clic

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 111 9.1 Configuring General Settings Purpose: Network settings must be properly configured before you operate device over network. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network Figure 9. 1 General Network Settings Interface 2. Select the General tab. 3. In the General Settings interface: You can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server. If the DHCP server is available, you can click the checkbo

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 158 13.1 Configuring General Settings Purpose: You can configure the BNC output standard, VGA/HDMI output resolution, mouse pointer speed, etc. Steps: 1. Enter the General Settings interface. Menu > Configuration > General 2. Select the General tab. Figure 13.1 General Settings Interface 3. Configure the following settings: • Language: The default language used is English. • CVBS Output Standard: Select the CVBS output standard to NTSC or PAL, which must be the same with the video input standard. • Resolution: Select

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 107 8.3 Detecting Video Tampering Purpose: Trigger alarm when the lens is covered and take alarm response action(s). Steps: 1. Enter Video Tampering interface of Camera Management. Menu> Camera> Tamper-proof Figure 8.8 Tamper-proof Setup Interface 2. Select a channel you want to detect video tampering. 3. Move the sensitivity bar and choose a proper sensitivity level. 4. Click the icon of Handling to enter the Handling interface. 5. Set the arming schedule and alarm respo

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 6 Product Key Features General  PAL/NTSC adaptive video inputs.  H.264 video compression with high reliability and superior definition.  Each channel supports dual-stream.  Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.  Input and output video quality is configurable.  Normal and event recording parameters configurable per individual camera.  Encoding for both audio/video composite stream and video stream; audio

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 81 Previous tag Next tag Tag search Exit Hide Progress bar Video type bar Note: 1. Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate special frames. 2. About video type bar: represents normal recording (manual or schedule); represents event recording (motion, alarm, motion | alarm, motion & alarm). 6.1.6 Playing Back by System Log Purpose: Play back record fil

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 72 Figure 6.9 Normal Video Search 2. Choose a record file you want to play back. If there is only one channel in the search result, clicking button takes you to Full-screen Playback interface of this channel. If more than one channel is optional, clicking button takes you to step 3 and step 4. Figure 6. 10 Result of Normal Video Search 3. Choose channels for simultaneous playback. Note: Optional channels for simultaneous playback are the same as the channels chosen to

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 112 Figure 9.2 PPPoE Settings Interface 3. Check the PPPoE checkbox to enable this feature. 4. Enter User Name, Password, and Confirm Password for PPPoE access. Note: The User Name and Password should be assigned by your ISP. Figure 9.3 PPPoE Settings Interface 5. Click the Apply button to save and exit the interface. 6. After successful settings, the system asks you to reboot the device to enable the new settings, and the PPPoE dial-up is automatically connected after reboot. You can go

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 63 5.8 Files Protection Purpose: You can lock the recorded files or set the HDD property to Read-only to protect the record files from being overwritten. Protect file by locking the record files: Steps: 1. Enter Playback setting interface. Menu> Playback Figure 5.29 Playback 2. Select the channels you want to investigate by checking the checkbox to . 3. Configure the record type, file type and start/end time. 4. Click Search to show the results. Figure 5.30 Playback- Search Result 5. Protect the record

  • User Manual of PS-7900SI/MI Series DVR 153 Figure 12.10 Import/Export Config File 2. Click the Export button to export configuration files to the selected local backup device. 3. To import a configuration file, select the file from the selected backup device and click the Import button. After the import process is completed, you must reboot the device. Note: After ha

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 36 3.5 User Logout Purpose: After logging out, the monitor turns to the live view mode and if you want to do some operation, you need to enter user name and password to log in again. Steps: 1. Enter the Shutdown menu. Menu>Shutdown Figure 3.9 Shutdown 2. Click Logout. Note: After you have logged out the system, menu operation on the screen is invalid. It is required a user name and password to login the system.

  • User Manual of PS-7900SI/MI Series DVR 76 Figure 6. 17 Event Details 8. Or you can directly click the button of each file item to enter its playback interface. The toolbar in the bottom part of Playback interface can be used to control playing process. Figure 6.18 Interface of Playback by Event (1) The hidden list of events will be displayed by moving the

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 123 9.3 Checking Network Traffic Purpose: You can check the network traffic to obtain real-time information of device such as linking status, MTU, sending/receiving rate, etc. Steps: 1. Enter the Network Traffic interface. Menu > Maintenance > Net Detect Figure 9.27 Network Traffic Interface 2. You can view the sending rate and receiving rate information on the interface. The traffic data is refreshed every 1 second.

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 70 6.1.2 Playing Back by Time Purpose: Play back video files recorded in specified time duration. Multi-channel simultaneous playback and channel switch are supported. Steps: 1. Enter playback interface. Menu>Playback 2. Set search conditions and click the Playback button to enter Playback interface. Figure 6.6 Video Search by Time In the Playback interface: The toolbar in the bottom part of Playback interface can be used to control playing process, as shown in Figure 6.7. Figure 6.7 Interface of Playback by Time

  • Tgard PS-7900SI, User Manual of PS-7900SI/MI Series DVR 151 Figure 12.7 Log Search Results 5. You can click the button of each log or double click it to view its detailed information. And you can also click the button to view the related video files if available. Figure 12.8 Log Details 6. If you want to export the log files, click the Export button to enter the Export menu.

  • User Manual of PS-7900SI/MI Series DVR 48 Figure 5.3 Encoding Parameters-Main Stream 2. Set encoding parameters for main stream 1) Select Record to enter the main stream settings interface. 2) Select the camera for configuration. 3) Configure the following parameters for the Main Stream (Normal) and the Main Stream (Event): • Stream Type:

Related Products and Documents (DVR):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Polaroid Polaroid PZ2320 AF Specifications polaroid/polaroid-pz2320-af-HI7.pdf 17 Dec 2022 2
2 Intergraph MegaRAID Controller Installation manual intergraph/megaraid-controller-958.pdf 04 Feb 2024 6
3 ANSMANN ACS 110 traveller Operating instructions ansmann/acs-110-traveller-73Y.pdf 13 Dec 2022 2
4 Emerson MS9600 Owner's manual emerson/ms9600-N28.pdf 21 Jun 2022 36 0.81 Mb
5 Audiovox Prestige Platinum 128-4629B Owner's manual audiovox/prestige-platinum-128-4629b-HI1.pdf 10 Oct 2022 21 0.07 Mb
6 Oki ML390 Specifications oki/ml390-P93.pdf 26 Jan 2024 2

Similar Resources:

  • Mitsubishi

    DX-TL4516E series

    (49 pages)
    DIGITAL RECORDERRS-232C COMMUNICATION CAPACITYOPERATION MANUALMODELDX-TL4516E seriesDX-TL4516U seriesDX-TL4509E seriesDX-TL4509U seriesContentsConnecting to a personal computer...........................................................2Connection via a modem ....................................................................................... 2Direct conne …
  • Digital Watchdog

    VMAXip PLUS DW-VP9P

    (2 pages)
    Model Total PoE Power Budget Max Power per PortDW-VP9-4P 76Watt 30WattDW-VP12-8P 150Watt 30WattDW-VP16-16P 150Watt 30WattPOE1 2 3 4 5 6 7 8RS-232LANUSB 3.0 HDMIRS-485 ALARM INALARM OUTINOUTAUDIOVGA9 10 11 12 13 14 15 16POWER CABLEIP CAMERA*NETWORK CABLEVGA MONITORUSB MOUSEPTZ CAMERA ALARM / SENSORHD MONITORVGAHDAUDIO OUT (INPUT DISABLED)*The number of ports …
  • Canon

    VB-C500VD

    (84 pages)
    NETWORK CAMERA Start GuidePlease read carefully Start Guide and the Operation Guide. Especially be sure to read "Safety Precautions" before using the network camera. Keep this guide in a readily accessible location for future reference. …
  • ZuumMedia

    N41080P-H4P-BK

    (36 pages)
    4 Channel 1080p High PerformanceStandalone NVR with 4 PoE OutputsCAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.Thelightning flash with arrowhead symbol, within an equilateral triangle, is intended to aler …
  • Euro Video

    EVD-04-025A1MJU

    (19 pages)
    User’s Manual (4 CH DVR) EVD-04-025A1MJU www.eurovideo-cctv.com S TA N D A L O N E D V R U S E R’S M A N U A L 1 USB 4 4 CHANNEL …
  • Vivitar

    DVR 880HDv2

    (62 pages)
    DVR 880HDv2 Digital Video Recorder User Manual © 2009-2011 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective companies. …

Comments, Questions and Opinions: