Manualios.com

Custom Audio Electronics DPT100-S Operation & User’s Manual

Custom Audio Electronics DPT100-S Manual Online:

4.25, 2268 votes
Custom Audio Electronics DPT100-S User Manual
Custom Audio Electronics DPT100-S User Guide
Custom Audio Electronics DPT100-S Online Manual

Text of Custom Audio Electronics DPT100-S User Guide:

  • 1. INSTALLATION AND USE 81- DPT100-S alcohol, solven t (Fig.1.10) 1.5.2 Cleaning To clean the printer, use a vacuum cleaner or soft cloth. Before cleaning the printer, unplug its electrical cord and make sure that the printer is off. Do not use alcohol, solvents or hard-bristled brushes. Do not let water or other liquids seep into the printer.

  • Custom Audio Electronics DPT100-S, 1. INSTALLATION AND USE 21- DPT100-S 1.1.2 Turning the printer On and Off How to turn the printer On • Connect the power supply to the printer (see sec. 1.2) How to turn the printer Off • Turn off the power supply. 1.1.3 Connection with the power supply To supply the printer use the adapter and cable packed with the printer and proceed as follows: • connect the adapter jack to the cable jack (see fig. 1.3) and plug the adapter into the electrical mains; • connect the cable RJ11 connector to the RJ11 connector located under the printer (see fig. 1.3). (Fig.1.3)

  • Custom Audio Electronics DPT100-S, 3. PRINTER FUNCTIONS 3-2 DPT100-S .moCIICSA.moCIICSA .moCIICSA .moCIICSA.moCIICSA.moCXEH.moCXEH .moCXEH .moCXEH.moCXEHnoitpircseDnoitpircseD noitpircseD noitpircseDnoitpircseD cCSE36$B1$gnitnirpedocrabfotnemeganaM mCSED6$B1$lairesniedomtnirpstimsnarT qCSE17$B1$gninilrednuselbasiD sCSE37$B1$lairesniretcarahctxenstimsnarT vCSE67$B1$sutatsretnirpastimsnarT CSE ⋅ 2n1n2n1nAF$B1$cihpargtnirP n$SGn42$D1$enilcihpargaotnitfihsetulosbateS nISGn94$D1$DIretnirpehtstimsnarT USG55$D1$eulavtluafedotsretemarapretnirpsteseR nWSGn75$D1$enilcihpargipd002afoetybn

  • Custom Audio Electronics DPT100-S, 3. PRINTER FUNCTIONS 3-9 DPT100-S $01 double width printing $02 double height printing $03 expanded printing [Notes] • The setting is stored in the EEPROM [Default] Setting by means of the front keys [Reference] ESC m [Example] For double height printing, transmit: $30 $32 $1B $4D NCSENCSE NCSE NCSENCSE [Name] Set normal mode printing [Format] ASCII ESC N Hex 1B 4E Decimal 27 78 [Description] Select normal mode printing:the receipt feeds out of the printer with the printing upside down running from right to left [Notes] [Default] Setting in option register by means of front keys [Reference] ESC R [Example] QCSEQCSE QCSE

  • Custom Audio Electronics DPT100-S, INTRODUCTION 5 DPT100-S (Tab.1) • Multi-function key. This key is used to access a variety of printer options depending on how long it is held down. If the printer is off (red LED off), when this key is pressed power is turned on (blinking red LED). To turn the printer off the key is pressed two times (the LED begins to blink faster) and if it is not pressed again within three seconds the printer shuts off, otherwise it returns to operating status. During the power-up phase, if the key is held down for at least three seconds, the printer enters the configuration mode and prints out a printer setup report.

  • Custom Audio Electronics DPT100-S, 4. TECHNICAL SPECIFICATIONS 14- DPT100-S Note : (1) STANDARD CUSTOM receipt and 1300 mAh battery. (2) It depends by the battery status, the printing typology and the environment temperature. noituloseRnoituloseR noituloseR noituloseRnoituloseR )mm/tod8(IPD302 ezisllorrepaPezisllorrepaP ezisllorrepaP ezisllorrepaPezisllorrepaP mm1±mm5.75 srosneSsrosneS srosneS srosneSsrosneS tuorepaP dohtemtnirPdohtemtnirP dohtemtnirP dohtemtnirPdohtemtnirP )mm/tod8(lamrehT edomtnirPedomtnirP edomtnirP edomtnirPedomtnirP °09,esrever,drawroF selytstnirPselytstnirP se

  • Custom Audio Electronics DPT100-S, 3. PRINTER FUNCTIONS 3-1 DPT100-S 3.1 CONTROL CHARACTERS The command table lists all the commands for the management of the printer functions. These commands can be transmitted to the printer with the serial interface. The commands can be transmitted to the printer at any moment, but they will only be carried out when the characters previously transmitted have been printed or the commands previously transmitted have been carried out. There are no commands with priority status; all the commands are carried out when the circular buffer is free

  • Custom Audio Electronics DPT100-S, 3. PRINTER FUNCTIONS 3-14 DPT100-S data buffer is full (Busy ). The status to be transmitted is shown in the table below: tiBnO/ffOxeHlamiceD noitcnuF 01, ffO000 tneserprepap,esolcrevoC nO03 3 rosnesrepaproneporevoC gnikrowton 3,2 ffO000 :rosnesdne-repaP tneserprepaP nOC021 :rosnesdne-repaP tneserptonrepaP 4ffO000 .ffOotdexiF.desutoN 5 ffO000 tcerrocerutarepmetdaeH nO0223 rorreerutarepmetdaeH 6 ffO000 tcerrocegatlovyrettaB nO0446 rorreegatlovyrettaB 7ffO000 .ffOotdexiF.desutoN [Default] [Reference] [Example] n$SGn$SG n$SG n$SGn$SG [Name] Set absolute shift into a graphic line. [Format] ASCII GS $ n Hex 1D 24 n Decimal 29 36 n [Range]

  • DPT100-S All rights reserved. Total or partial reproduction of this manual in whatever form, whether by printed or electronic means, is forbidden. While guarantee- ing that the information contained in it has been carefully checked, CUSTOM ENGINEERING SPA and other entities utilized in the realization of this manual bear no responsibility for how the manual is used. I

  • Custom Audio Electronics DPT100-S, 1. INSTALLATION AND USE 51- DPT100-S 1.3 HEXADECIMAL DUMP This function is used to display the characters received from the communications port; after the reception of each 10 characters from the communications port, the printer prints out both the hexadecimal code received as well as the corresponding ASCII code. Shown below is an example of a Hexadecimal Dump: 48 65 78 61 64 65 Hexade 63 69 6D 61 6C 20 cimal 64 75 6D 70 20 66 dump f 75 6E 63 74 69 6F unctio 6E 20 30 31 32 33 n 0123 34 35 36 37 38 39 456789 61 62 63 64 65 66 abcdef 67 68 69 6A 6B 6C ghijkl 6D 6E 6F

  • Custom Audio Electronics DPT100-S, INTRODUCTION 1 DPT100-S MANUAL ORGANIZATION In addition to the Introduction which includes a description of the explanatory notes used in the manual, general safety information, how to unpack the printer and a brief description of the printer including its basic features, this manual is organized as follows: Chapter 1: Contains the information required for correct printer installation and its proper use, as well as interface specifications Chapter 2: Contains information on interface specifications Chapter 3: Contains a description of the printer command set C

  • Custom Audio Electronics DPT100-S, 2. INTERFACES 32- DPT100-S SIGNAL GND TXD D C D CTS DSR 8 9 7 5 6 3 4 2 1 8 9 7 5 6 3 4 2 1 RXD SIGNAL GND RXD D C D CTS DSR 8 9 7 5 6 3 4 2 1 TXD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 9-pin connector PC (s’print cable) 9-pin connector PC (s’print cable) (Fig.2.2) (Fig.2.3) The diagrams below show a sample connection between printer and Perso- nal Computer using a 9- and 25-pin female connector.

  • 3. PRINTER FUNCTIONS 3-15 DPT100-S nISGnISG nISG nISGnISG [Name] Transmit printer ID. [Format] ASCII GS I n Hex 1D 49 n Decimal 29 73 n [Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51 [Description] Transmits the printer ID specified by n follows: nn n nnDIretnirPDIretnirP DIretnirP DIretnirPDIretnirPnoitacificepS 94,1DIledomretnirPH05 05,2desutoNffOotdexiF 15,3DInoisrevMOR)retcarahc4(noisrevMORnosdnepeD

  • TABLE OF CONTENTS i DPT100-S INTRODUCTION MANUAL CONTENTS ....................................................................................1 EXPLANATORY NOTES USED IN THIS MANUAL ......................................1 GENERAL SAFETY INFORMATION.............................................................1 UNPACKING THE PRINTER .......................................................

  • Custom Audio Electronics DPT100-S, 2. INTERFACES 12- DPT100-S 2.1 RS232 SERIAL The printer is equipped with an RS232 serial interface with RJ11 connector (fig. 2.1) located underneath the printer. For serial connection, a connecting cable (fig. 2.2) with double connection system is packed with the printer. On one side is a 9-pin female connector (fig. 2.2A) to connect to the serial port; on the other side of the same connector is a RJ11 connector (fig. 2.2.B). For the layout of signals on the connectors, please refer to tables 2.1 and 2.2. (Fig.2.1) (Fig.2

  • Custom Audio Electronics DPT100-S, 3. PRINTER FUNCTIONS 3-10 DPT100-S RCSERCSE RCSE RCSERCSE [Name] Set reverse mode printing [Format] ASCII ESC R Hex 1B 52 Decimal 27 82 [Description] Selects printing in reverse mode: the receipt feeds out of hte printer with the printing in normal mode running from left to right. [Notes] [Default] Setting in option register by means of front keys [Reference] ESC N [Example] WCSEWCSE WCSE WCSEWCSE [Name] Prints a graphic line at 200 dpi [Format] ASCII ESC W Hex 1B 57 Decimal 27 87 [Description] After receiving this command, the printer waits for 48 bytes which correspond to a

  • Custom Audio Electronics DPT100-S, TABLE OF CONTENTS iiDPT100-S 5. CHARACTER FONTS 5.1 CHARACTER SETS ............................................................................ 5-1 APPENDIX A - ACCESSORIES AND SPARE PARTS A.1 SPARE PARTS .................................................................................... A-1

  • Custom Audio Electronics DPT100-S, 3. PRINTER FUNCTIONS 3-13 DPT100-S sCSEsCSE sCSE sCSEsCSE [Name] Transmits the next character in serial [Format] ASCII ESC s Hex 1B 73 Decimal 27 115 [Description] Transmits the next character it receives on the serial port [Notes] [Default] [Reference] [Example] If you transmit: ESC s A the last character, A, will not be printed but immediately trans- mitted on the serial line 2n1n·CSE2n1n·CSE 2n1n·CSE 2n1n·CSE2n1n·CSE [Name] Print graphic bank ( 384 ´ 85 dots). [Format] ASCII ESC · n1 n2 Hex 1B FA n1 n2 Decimal 27 250 n1 n2 [Range] 0 £ n1, n2 £ 255 [Description] Pr

  • Custom Audio Electronics DPT100-S, 3. PRINTER FUNCTIONS 3-3 DPT100-S [Notes] • The commands 00H - 09H do not cancel the print buffer • The commands which modify the direction of the characters are only active at the beginning of the line [Default] Setting in option register by means of front keys [Reference] 00H, 02H, 03H, 04H [Example] H20H20 H20 H20H20 [Name] Double height printing [Format] ASCII - Hex 02 Decimal 2 [Description] The printer prints in double height format [Notes] • The commands 00H - 09H do not cancel the print buffer • The commands which modify the direction

  • INTRODUCTION DPT100-S 4 4 1 2 3 “sixload” easy paper load, making it simpler and more convenient to use. It has a 203 dpi thermal print mechanism that utilizes 57.5mm-wide paper rolls and can print up to 24 or 40 (1) charaters per line. (1) NOTE The 40 column version is downloadable on the Support/Download/ Firmware section from www.custom.it web site. PRINTER DESCRIPTION The p

  • Custom Audio Electronics DPT100-S, INTRODUCTION DPT100-S 2 • Use the type of electrical power supply indicated on the printer label. If in doubt, contact your retailer. • When deciding where to place the printer, make sure it is positioned where its cables will not be damaged. • Do not introduce foreign objects of any kind into the printer as they could cause a short circuit and could jeopardize printer functioning. • Do not spill liquids onto the printer. • Do not carry out technical operations on the printer, with the exception of the scheduled maintenance procedure

  • Custom Audio Electronics DPT100-S, 1. INSTALLATION AND USE 31- DPT100-S 1.2 CONFIGURATION The printer set up print out (see fig. 1.4) includes a range of information, and among these should be pointed out. The printer’s configurable (1) parameters are: • Baud Rate: 38400, 19200, 9600 D , 4800, 2400, 1200, 600. • Data length: 7, 8 D bits/car. • Parity: None D , even or odd. • Handshaking: XON/XOFF D or Hardware. • Autofeed: CR deactivated D or CR activated. • Consumption: Low power, High power D (2) . • Print density: -2, -1, 0 D , +1, +2. Please note: the parameters ma

  • Custom Audio Electronics DPT100-S, 2. INTERFACES 22-DPT100-S RJ11 connector DPT100 (fig. 2.1) NIPNIP NIP NIPNIPLANGISLANGIS LANGIS LANGISLANGISTUO/NITUO/NI TUO/NI TUO/NITUO/NIAA A AANOITPIRCSEDNOITPIRCSED NOITPIRCSED NOITPIRCSEDNOITPIRCSED 11 1 11 CIRV+NI- egatlovylppusrewoplanretxE 22 2 22 DNG-DNGlangisdnuorG 33 3 33 XRNIDXTatadevieceR 44 4 44 XTTUODXRatadtimsnarT 55 5 55 STRTUOSTCatadeviecerotydaeR/dnesotydaeR 66 6 66 DNG-DNGlangisdnuorG 9-pin female connector (fig. 2.2.A) NIPNIP NIP NIPNIPLANGISLANGIS LANGIS LANGISLANGISTUO/NITUO/NI TUO/NI TUO/NITUO/NIAA A AANOITPIRCSEDNOITPIRCSED NOITPIRCSED NOITPIRCSEDNOITPIRC

  • Custom Audio Electronics DPT100-S, 1. INSTALLATION AND USE 61- DPT100-S 1.5 MAINTENANCE 1.5.1 Changing the paper roll To change the roll of paper, proceed as follows: 1) Open the printer cover (see fig. 1.11) levering on the cover lateral projections and position the paper roll so that it unrolls in the direction shown in figure 1.6; (Fig.1.7) (Fig.1.6)

  • Custom Audio Electronics DPT100-S, 3. PRINTER FUNCTIONS 3-5 DPT100-S [Reference] 0BH [Example] HB0)n(HB0)n( HB0)n( HB0)n(HB0)n( [Name] Forward feeds (n) lines [Format] ASCII - Hex 0B Decimal 11 [Description] Carries out the number of line feeds specified in (n) [Notes] •The number must be ASCII and between 0 and 9 (when n=0 the command is ignored) • This command clears the line buffer [Default] [Reference] 0AH [Example] To forward feed fast, 5 lines at a time: $35 $0B (or 5 and the command $0B) HD0HD0 HD0 HD0HD0 [Name] Print the line buffer [Format] ASCII - Hex 0D Decimal 13 [Description] This command prints the line buffer [Notes] • If the line buffer is em

  • Custom Audio Electronics DPT100-S, 3. PRINTER FUNCTIONS 3-4 DPT100-S H40H40 H40 H40H40 [Name] Restore small character printing [Format] ASCII - Hex 04 Decimal 4 [Description] The printer resumes printing with small characters [Notes] • The commands 00H-09H do not cancel the print buffer • the commands which modify the dimensions of the characters are only active at the beginning of the line [Default] Setting in the option register by means of the front keys [Reference] 00H, 01H, 02H, 03H [Example] H70H70 H70 H70H70 [Name] Cancel print data buffer [Format

  • Custom Audio Electronics DPT100-S, 3. PRINTER FUNCTIONS 3-8 DPT100-S @CSE@CSE @CSE @CSE@CSE [Name] Resets the printer [Format] ASCII ESC @ Hex 1B 40 Decimal 27 64 [Description] Cancels all the data in the print buffer and resets the printer mode, restoring the mode which was enabled at the moment of switching on [Notes] • Same as hardware reset • After the command has been transmitted, 1.5 seconds elapse before the printer is enabled [Default] [Reference] [Example] This can be useful during switching on in order to avoid the sending of false characters during initialization by the master device ]Ln[]Hn[ACSE]Ln[]Hn[ACSE ]Ln[]Hn[ACSE ]Ln[]Hn[ACSE]Ln[]Hn[ACSE [Name] Executes [n] dots line feed [Format] ASCII ESC A nH nL Hex

Related Products and Documents (Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Campomatic FRZ360N Installation, use and maintenance instructions campomatic/frz360n-616.pdf 18 Aug 2023 48
2 Gotharman Fuzion Operation & user’s manual gotharman/fuzion-R2J.pdf 11 Feb 2023 212
3 Mitsubishi WS-48315 Service manual mitsubishi/ws-48315-4A3.pdf 25 Mar 2023 68
4 Smeg SA37X Installation and operating instructions manual smeg/sa37x-7S6.pdf 05 Nov 2023 29 0.28 Mb
5 AMERICANA Americana AGBS300P Installation and owner's instructions ge/americana-agbs300p-A28.pdf 17 Apr 2023 48 1.57 Mb
6 Vertex Standard FT-2000 Operating manual vertex-standard/ft-2000-82N.pdf 28 May 2023 132 7.82 Mb

Similar Resources:

  • Zebra

    P320i

    (49 pages)
    P320i Plastic Card PrinterCardPrinterSolutionsGeneral informationGetting startedOperationCleaningSpecificationsAppendix AAppendix BTroubleshootingPrinting a cardAppendix CUser's ManualP320 iUser's Manual No. 980392-001 Rev. D© 2003 ZIH Corp …
  • Xerox

    WORKCENTRE 7120

    (160 pages)
    Xerox® WorkCentre® 7120/7125System Administrator GuideGuide de l’administrateur systèmeEspañol Guía del administrador del sistemaPortuguês Guia de Administração do SistemaXerox WorkCentre 7120/7125Multifunction Printer …
  • Ricoh

    PRO C751

    (76 pages)
    When the Machine Does Not Operate As WantedClearing MisfeedsAppendix123For safe and correct use, be sure to read the Safety Information in "About This Machine" before using the machine.TroubleshootingOperating Instructions …
  • Canon

    i950

    (68 pages)
    Color Bubble Jet PrinterColor Bubble Jet PrinterColor Bubble Jet PrinterColor Bubble Jet PrinterQuick Start GuideQuick Start GuideQuick Start GuideQuick Start Guide …
  • Epson

    Stylus SX420W Series

    (2 pages)
    Print Scan Copy3-in-1Epson StylusSX420W SeriesPRODUCT GUIDEPrint and scan effortlessly from anywhere in the home with this wireless all-in-one. View and print using the LCD screen and make copies too. It’s all very economical with individual ink cartridges.Print lab-quality photos and rst-class documents at even longer range with the latest high-speed W …
  • Brother

    MPRINT MW-100

    (72 pages)
    Before using this printer, be sure to read this User’s Guide. We suggest that you keep this manual in a handy place for future reference. Antes de usar esta impresora, asegúrese de leer esta “Guía del usuario”. Aconsejamos mantener este manual a mano para futuras consultas.MW-100Mobile PrinterImpresora móvilUser’s GuideGuía del usuario General …

Comments, Questions and Opinions: