Toshiba e-studio206L Operation & User’s Manual

Text of Toshiba e-studio206L User Guide:

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 20 SETUP FOR DEVELOPER UNIT Fully shake the developer material bottle. Take off the developer material cover. II-1. e-STUDIO206L/256/306/356/456 Remove the cap from the developer material bottle. Attach the developer nozzle to the bottle. Sub Menu II. UNPACKING AND SETUP

• © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 16 SETUP FOR DEVELOPER UNIT Open the ADU. II-1. e-STUDIO206L/256/306/356/456 Lower the pressure release levers on both sides. Sub Menu II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 17 SETUP FOR DEVELOPER UNIT Remove 1 screw. Take off the pressure release metal plate on the left while lowering it. II-1. e-STUDIO206L/256/306/356/456 Sub Menu Take off the pressure release metal plate on the right in the same manner. * Keep the removed screws and pressure release metal plates safe. II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 34 SETTING DATE AND TIME II-1. e-STUDIO206L/256/306/356/456 Sub Menu Press [GENERAL]. Press [CLOCK]. Press [DATE/TIME]. II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 28 AUTOMATIC GAMMA ADJUSTMENT II-1. e-STUDIO206L/256/306/356/456 Sub Menu When "Press [OK]" appears, press [OK]. When "Execute gamma adjustment. Set 4A/LT paper in the drawer 1 and press [OK]" appears, set A4-size paper in the upper drawer. II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 7 UNPACKING (1) II-1. e-STUDIO206L/256/306/356/456 Sub Menu Have 2 service technicians hold the 2 grips at the paper exit side and the 2 handles at the paper feed side of the e-STUDIO. Gently place the e-STUDIO on the desk fitting the positioning pins of the desk into the slots of the e-STUDIO. * Place the e-STUDIO so that its front is aligned to that of the desk. II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 11 5 RUBBER CAPS DEVELOPER MATERIAL (except for NAD and MJD) OPERATOR'S MANUAL POCKET (for JPD and FJP) ACCESSORIES II-1. e-STUDIO206L/256/306/356/456 Sub Menu POWER CABLE (for JPD and FJP) II. UNPACKING AND SETUP TONER CARTRIDGE (except for NAD, MJD, JPD and FJP)

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 18 SETUP FOR DEVELOPER UNIT Raise both pressure release levers to apply pressure. II-1. e-STUDIO206L/256/306/356/456 Open the front cover. Sub Menu II. UNPACKING AND SETUP

• © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 24 AUTO-TONER SENSOR ADJUSTMENT II-1. e-STUDIO206L/256/306/356/456 Sub Menu Turn the power ON with the main power switch. Press [OK] on the AUTHENTICATION screen. A password is unnecessary. 主電源 When "Start easy setup. Press [OK]." appears, press [OK]. The auto-toner sensor adjustment starts. II. UNPACKING AND SET

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 39 COPY OPERATION AND COPY QUALITY II-1. e-STUDIO206L/256/306/356/456 Sub Menu Set the test chart on the original glass. Make a copy and check the following contents. Paper feed performance [Upper drawer] [Lower drawer] [Bypass feed] Fusing or cleaning performance Control panel II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 4 UNPACKING (1) Remove the packing materials. Lower the plastic bag. Take out the unpacking instructions. II-1. e-STUDIO206L/256/306/356/456 Sub Menu II. UNPACKING AND SETUP

• © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 3 UNPACKING (1) Cut 2 straps. Lift up the packing carton to remove it. II-1. e-STUDIO206L/256/306/356/456 Sub Menu * At least 2 service technicians are required to unpack and set up the e-STUDIO. II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 6 UNPACKING (1) Prepare the options and the desk. Pull out 2 handles at the paper feed side. II-1. e-STUDIO206L/256/306/356/456 Sub Menu II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 13 Set up the original cover on the e-STUDIO. SETUP FOR ORIGINAL COVER KA-1640PC II-1. e-STUDIO206L/256/306/356/456 Place the platen sheet on the original glass with the edges of the sheet aligned to the original scales at both the rear and left sides. Remove the backing paper from the double-faced tape on both sides of the sheet. Sub Menu II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 1 UNPACKING (1) ACCESSORIES SETUP FOR ORIGINAL COVER KA-1640PC UNPACKING (2) SETUP FOR DEVELOPER UNIT AUTOMATIC SET-UP MODE AUTO-TONER SENSOR ADJUSTMENT SETUP FOR TONER CARTRIDGE AUTOMATIC GAMMA ADJUSTMENT SETTING DATE AND TIME DATA ENCRYPTION FUNCTION COPY OPERATION AND COPY QUALITY Main Menu Menu II. UNPACKING AND SETUP II-1. e-STUDIO206L/256/306/356/456

• © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 27 SETUP FOR TONER CARTRIDGE Insert the toner cartridge into the e-STUDIO until the end. II-1. e-STUDIO206L/256/306/356/456 Sub Menu Close the front cover according to the instructions on the screen. II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 12 ACCESSORIES USER DOCUMENTATION CD-ROM CLIENT UTILITY CD-ROM SAFETY INFORMATION QUICK START GUIDE II-1. e-STUDIO206L/256/306/356/456 Sub Menu II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 5 UNPACKING (1) Remove the packing sheet from the original glass. Remove the packing material and accessories from the inner receiving tray to the paper exit side. Remove the packing sheet. II-1. e-STUDIO206L/256/306/356/456 Sub Menu II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 40 COPY OPERATION AND COPY QUALITY Confirm that copying is performed properly when paper is fed from the drawers or the bypass tray. II-1. e-STUDIO206L/256/306/356/456 Sub Menu Fusing and cleaning are performed properly. II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 22 SETUP FOR DEVELOPER UNIT Push the process unit into the e-STUDIO as far as it goes. Secure it with 2 hand screws. II-1. e-STUDIO206L/256/306/356/456 Close the front cover and the ADU. Sub Menu II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 19 SETUP FOR DEVELOPER UNIT Secure the pressure release metal plates on both sides with 2 screws each. II-1. e-STUDIO206L/256/306/356/456 Fully loosen 2 hand screws. Pull out the process unit. Sub Menu II. UNPACKING AND SETUP

• Toshiba e-studio206L, © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 37 DATA ENCRYPTION FUNCTION Set the value of the data encryption, and then press [ENTER]. The values are as below. 0: Disable 1: Enabled (giving priority to the security 2: Enabled (giving priority to the performance) Shut down the equipment by pressing the [ON/OFF] button until you hear a sound. Turn the power OFF with the main power switch. II-1. e-STUDIO206L/256/306/356/456 Sub Menu or II. UNPACKING AND SETUP OFF ON

• © TOSHIBA TEC CORPORATION 2012 All Rights Reserved. 29 II-1. e-STUDIO206L/256/306/356/456 AUTOMATIC GAMMA ADJUSTMENT Sub Menu The test chart for the adjustment is output. Press [OK]. II. UNPACKING AND SETUP

More Instructions:

	Toshiba e-studio206L Scanning manual 22-08-2023 134	DOWNLOAD
	Toshiba e-studio206L Safety information manual 03-07-2023 36	DOWNLOAD
	Toshiba e-studio206L Information 24-12-2023 8	DOWNLOAD
	Toshiba e-studio206L Quick start manual 02-03-2023 90	DOWNLOAD

Related Products and Documents (Copier):

Comparable Devices:

Similar Resources:

• Xerox WorkCentre 3655 (19 pages) Secure Installation and Operation of Your WorkCentre™ 3655/3655i WorkCentre™ 5845/5855/5865/5865i/5875/5875i/5890/5890i WorkCentre™ 5945/5945i/5955/5955i WorkCentre™ 6655/6655i WorkCentre™ 7220/7220i/7225/7225i WorkCentre™ 7830/7830i/7835/7835i/7845/7845i/7855/7855i WorkCentre™ 7970/7970i 2016 Xerox® ConnectKey® Technology …

• Sharp AL-1550 (26 pages) CODE: 00ZAL1550/A1EDIGITAL COPIERMODEL AL-1550* This Service Manual describes only the differences fromthe AL-1250. For the common items with the AL-1250,please refer to the AL-1250 manual.SHARP CORPORATION[ 1 ] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1[ 2 ] SPECIFICATIONS . . . . . . . . . . . …

• Dell W5210 (1 pages) Dell™ Laser Printer 5210n/5310nSupported Envelope SizesIf you have installed an optional envelope feeder, the information below replaces the supported envelope sizes specified in the User’s Guide.Media Size7 ¾ Envelope 3.875 x 7.5 in. (98 x 191 mm)9 Envelope 3.875 x 8.9 in. (98 x 225 mm)10 Envelope 4.12 x 9.5 in. (105 x 241 mm)DL Envelope 4.33 x 8.66 in …

• Sharp DX-C200 (2 pages) Network ScanNetwork PrintCopyFaxDuplexSmall teams face tough challenges. Give them what they really need.DX-C200Digital Full Colour Multifunctional SystemCompact Design and Enhanced Usability, the DX-C200 Four Functions in One colour printer offers small to medium businesses the advantages of a multifunctional printer at a very affordable cost. …

• Brother MFC-8440 (12 pages) SERVICE MANUAL MODEL: MFC8440/8840D/8840DN DCP8040/8045D/8045DN Read this manual thoroughly before maintenance work. Keep this manual in a convenient place for quick and easy reference at all times. fineline6 …

• Konica Minolta DI2510 (210 pages) 2IntroductionAvailable FeaturesBefore Making CopiesBasic Copy OperationsCopy PaperOriginal DocumentsSpecifying Copy SettingsTouch Panel MessagesTroubleshootingDi2510/Di3010/Di3510User Manual[Basic Operations]www.konicaminolta.net …

Comments, Questions and Opinions: