Manualios.com

Panasonic AG-MX70E Operating Instructions Manual

Panasonic AG-MX70E Manual Online:

3.05, 1016 votes
Panasonic AG-MX70E User Manual
Panasonic AG-MX70E User Guide
Panasonic AG-MX70E Online Manual

Text of Panasonic AG-MX70E User Guide:

  • Panasonic AG-MX70E, 92 (E) ENGLISH Other operations 3) Select “File” > “Capture Title” from the menu of the Memory Status screen to read in Title data. Select “File” > “Capture IntVideo” from the menu of the Memory Status screen to read in IntVideo data. 4) Enter the image format and the file name and click “Save.” When the data to be read in is composed of multiple images, a number will be automatically appended at the end of the file name. <Notes> ≥ For saving in of Title data, the image format is fixed to TARGA (32 bit/pixel, with α channel). ≥ For saving in of IntVideo data, the image format can be selected as TARGA, JPEG

  • Panasonic AG-MX70E, 97 (E) Before calling for service Problem What to check ≥ The Title data has been cleared, but the data has not been deleted from the image memory. When Protect has been set for the data, it will not be cleared even when clearing is performed from the menu of the main window. To clear data with the Protect setting, perform the clearing operation from the memory status window. ≥ The button display of main window is abnormal. In a Windows 98 environment with certain video cards, the button display may become abnormal. Even if this problem should occur, operation of this software will not be influenced. It may be possible to elimina

  • 34 (E) ENGLISH Effect-by-effect setting screens Pos. X 128 Y 128 Z 196 Event ME Time Pattern INT 00E 10:00F 3101 Wht Chroma Key 1 R = - - - G = - - - B = - - - Key Color Cancel Offset 128 C Slice 128 C-Area 3 Mono L 6 Crop A 2 8 12 7 12 Effects Off DVE Plus Off 6301 3D Modify Rotate 0 Time 0 TransF 255 KeyColor 1 Slice1 128 Slope1 8 K Level 255 [Chroma Key] se

  • Panasonic AG-MX70E, 53 (E) [Setup] initial setting screen The LCD display now shows the setting screens for each effect pattern. Proceed to set the edges and effects, and if the settings are acceptable, enter them using [Enter], and return to the direct pattern settings. Example of transition Pos. X 128 Y 128 Z 196 Event ME Time Pattern INT 00E 10:00F 2001 Wht Direct Pattern Transition Enter to EXIT Modify Effects Off Comp Off Pattern Edge Hard Width 0 Color White If the setting operation is exited part of the way through (by pressing other buttons, etc.), the settings performed so far will not be stored in the memory. The settings of six key patterns and seven transiti

  • Panasonic AG-MX70E, 30 (E) ENGLISH Execution of Effects 3) Pattern selection Select the pattern using the direct transition button or using the number keys. Patterns with numbers 3000 and up are key patterns. Perform the border, shadow, trail and other settings on the LCD setting screen. The separate border, trail and other settings are stored in each direct button and read out. 4) Key adjustment Adjust the slice, slope and other settings on the LCD setting screen. 5) Execution Slide the transition lever to the B side or set the ME transition time and press the Auto Take button. DSK key 1) Preparation Check that the DSK button’s lamp is neither lit nor flashing. If it is lit or flashing, it

  • Panasonic AG-MX70E, 29 (E) [Video Effects] setting screen <Notes> ≥ In the case of pattern numbers 200 to 211, 1001 to 1034, 213 to 220, 222, 1060 to 1067 and 1069, transitions can be initiated with the DVE setting parameters applied to the B channel. When this is done, the pattern is changed to MIX (56). (With the A bus/B bus) ≥ [Ripple], [Multi], [Spark] and other 3D patterns* 1 can be selected for one channel only, either A or B. The pattern selected last takes precedence, and the previously selected pattern is canceled. *1 The “other 3D patterns” are as foll

  • Panasonic AG-MX70E, 40 (E) ENGLISH Effect-by-effect setting screens 3D Modify Rotate 128 Time 0 TransF 255 0 - 255 0 - 255 0 - 255 3D Modify Width 192 Angle 96 Time 48 Amp 32 0 - 255 0 - 255 0 - 255 0 - 255 3D Modify Width 160 Angle 96 Amp 48 0 - 255 0 - 255 0 - 255 3D Modify Rotate 128 Axis 0 View 128 Depth 64 0 - 255 0 - 255 0 - 255 0 - 255 [3Dmodify] setting This takes effect only for the special 3D patterns (numbers 6001 to 6438 and 6601 to 6716) when the 3D optional board (AG- VE70) has been installed. The parameters of the pattern for the 3D keys can be changed using the rotary 2, 3, 4 and 5 controls. They can be stored in the memory for each pattern.

  • Panasonic AG-MX70E, 98 (E) ENGLISH Specifications [GENERAL] Power Source : 220 V to 240 V AC, 50/60 Hz Power Consumption : 52 W (with no optional accessories installed), 70 W (with all optional accessories installed) Operating temperature: + 5 °C to + 40 °C Operating humidity: Less than 80% (relative humidity) Dimensions (W k H k D): 424 k 197 k 400 mm Weight: 8.2 kg (with no optional accessories installed) 8.7 kg (with all optional accessories installed) indicates safety information. [VIDEO] Video Format: 525 (NTSC)/625 (PAL) switchable Quantization: Main input: 9 bit External input (EXT): 8 bit Internal processing: 4: 2: 2: 4 8 bits (ON/OFF switching for Dynamic Rounding processing enabled) Key: 13.

  • Panasonic AG-MX70E, 69 (E) Key patterns BasicPattern Key Diss Exp Exp+Diss 3001 3021 3041 3002 3022 3042 3003 3023 3043 3004 3024 3044 3005 3025 3045 3006 3026 3046 PinP Diss Exp Exp+Diss 3301 3311 3321 3302 3312 3322 3303 3313 3323 3304 3314 3324 Rotate 2DComp +Diss 4601 4611 4602 4612 4603 4613 4604 4614 2D Move Exp +Diss 3401 3411 3402 3412 3403 3413 3404 3414 3405 3415 3406 3416 3407 3417 3408 3418 2D Move2 ExpCurve2 +Diss 3441 3451 3442 3452 3443 3453 3444 3454 3445 3455 3446 3456 3447 3457 3448 3458 DualPinP Move +Diss 3501 3511 3502 3512 3503 3513 3

  • Panasonic AG-MX70E, 83 (E) OFF The operation at the time of DSK OFF will be displayed. The display contents are the same as for DSK ON. When double-clicked, the Properties window (page 87) will open. 8 NAME/COMMENT The name given to the data will be displayed. When double-clicked, the Properties window (page 87) will open. 9 Screen descriptions TYPE The data playback format will be displayed. When double-clicked, the Properties window (page 87) will open. 7 Duration (This appears only when Auto Trigger of DSK OFF is valid.) Data playback format Still Movie Once Movie Repeat Crawl Roll List mode 1 2 3 4 5 6 7 8 9 For data with a Mark setting, the Mark

  • 76 (E) ENGLISH Processing of image data ∫ By data type Image data is processed by the AG-MX70 either as Title data or IntVideo data, depending on the application. When image data is transmitted to the AG-MX70, it is necessary to first select one of these 2 data types. ≥ Title data Data to be used for DSK playback should be transmitted as Title data. RGB data and α

  • Panasonic AG-MX70E, 15 (E) Y/V P /V5 YC B R P Y/V P /V6 YC B R P Y/V P /V7 YC B R P Y/V P /V8 YC B R P VIDEO IN 1 2 3 4 AUDIO IN Parts and Their Functions Composite/component Y input 1 connector 1 2 Composite 5/component PB input 1 connector 3 Component PR input 1 connector 4 YC input 1 connector 5 Composite/component Y input 2 connector 6 Composite 6/component PB input 2 connector 7 Component PR input 2 connector 8 YC input 2 connector 9 Composite/component Y input 3 connector : Composite 7/component PB input 3 connector ; Component PR input 3 connector < YC input 3 connector = Composite/component Y input 4 connector > Composite 8/component PB input 4 connector ? Component PR input 4 connector @ YC

  • Panasonic AG-MX70E, 32 (E) ENGLISH Effect-by-effect setting screens [Pattern Edge] setting This is used to set edges for the patterns. The border colour set here is used as the border matte for trail. It is updated by the colour which is read out for the direct pattern. Select [Hard], [Soft], [Border] or [Soft Border] using the rotary 2 control. The default setting is [Hard]. When [Soft] or [Soft Border] has been selected, No.2001 to 2195 and 6008 to 6010 patterns cannot be selected. When [Soft Border] has been selected, the #701 to No.707 (24 to 27), 801 to 814 (183 to 196) patterns cannot be selected. The [Width]

  • 8 (E) ENGLISH Parts and Their Functions Preview output selection area The controls in this area are used to determine which images among the transition preview, DSK preview and A/B bus images are to be output from the PREVIEW output connector on the rear panel. Effect execution button area Modify PREVIEW ME PRV DSK A PROG A PROG STILL STROBE VIDEO EFFECTS COLOR EFFECTS B PRESET

  • 13 (E) Parts and Their Functions Audio mixer area Modify MAX MIN MIN MAX MASTER SOURCE 1 / 5 SOURCE 2 / 6 SOURCE 3 / 7 SOURCE AUX 1 MIC / AUX 2 4 / 8 DR 1 2 3 4 5 6 7 SOURCE 1/5 fader This fader is used to adjust the audio level of input 1 which was set on the initial setting page; when it is operated together with the shift key, it is used to adjust the audio

  • Panasonic AG-MX70E, 74 (E) ENGLISH Key patterns Pers In Move +Diss 6621 6631 6622 6632 6623 6633 6624 6634 Sphere Curve Move +Diss 6421 6431 6422 6432 6423 6433 6424 6434 6425 6435 6426 6436 6427 6437 6428 6438 Title Diss 9621 9631 9641 T-13 T-14 T-15 9651 9661 9671 T-16 T-17 T-18 9681 9691 9701 T-19 T-20 T-21 9711 9721 9731 T-22 T-23 T-24 Title Diss 9010 9011 9012 Key Learn11 Key Learn12 Key Learn13 9013 9014 9015 Key Learn14 Key Learn15 Key Learn16 9016 9017 9018 Key Learn17 Key Learn18 Key Learn19 9019 Key Learn20 Accordion Move +Diss 6221 6231 622

  • Panasonic AG-MX70E, 93 (E) Other operations Setting the initial properties The initial values for the properties to be used with new data can be set on the “Initial set of Properties Data” setting screen. 1) Select “Properities initial value setting” from the Tools menu of the main window. The “Initial set of Properties Data” setting screen is displayed. 2) Set the individual items and click the “OK” button to change the settings. All settings can be returned to the initial value by pressing the “Load Default” button. Still Duration The duration is set for when Still is used

  • Panasonic AG-MX70E, 41 (E) ≥ With the page turn group (number 6008) R2: [Rotate] (rotation) setting R3: [Angle] setting R4: [Turn] setting R5: [Radius] setting ≥ With the ripple group (number 6031) R2: [Level] (amplitude) setting R3: [Time] setting R4: [Width] setting The position of the ripple centre can be changed using [Shift] + XY. ≥ With the spark group (number 6032) R2: [Width] setting R3: [Size] setting R4: [Time] setting ≥ With the melt group (numbers 6033 to 6034) R2: [Level] setting ≥ With the twist group (numbers 6009 to 6010) R2: [Rotate] (rotation) setting R3: [Turn] setting R4: [Tilt] setting 3D Modify Rotate 128 Angle 32 Turn 64 Radius 3 0 - 255 0 - 255 0 - 255 0 - 7 3D Modify

  • Panasonic AG-MX70E, 89 (E) Automatic transmission and playback of Title data The data from the cursor position to the end of the transmission list can be transmitted automatically and DSK playback can be performed automatically. Select “Operation” > “Autoload” from the menu of the main window. Manual transmission and playback of Title data Data registered in the transmission list can be transmitted to the AG-MX70 using the following precedure. 1) Move the cursor to the data to be transmitted and left click on the data. The yellow frame cursor moves to the selected data. 2) Select “Operation” > “Load title” from the menu of the main window. The data is transmitt

  • Panasonic AG-MX70E, 49 (E) [Audio Effects] settings [PAN] setting Set [On] or [Off] using the rotary 3 control. The default setting is [Off]. Select the input channel to be used using the rotary 4 control. Select [L], [R] or [L+R]. The default setting is [L]. Set the output balance using the rotary 5 control. Make the selection from L7 to 0 to R7. The default setting is 0. PAN 1 Off IN Ch L Balance 0 L7 - 0 - R7 On Off L R L+R Pos. X 128 Y 128 Z 196 Event ME Time Pattern INT 00E 10:00F 3015 Wht Audio Effects EQ Mid M Level 0 Freq 1.01KHz Q 0.5 Voice Change Off Pitch Up Level 5 Mute Off AB Pan Off IN Ch L Balance 0 1EQ On Low 0 High 0 1 - 8 Aux1 Au

  • Panasonic AG-MX70E, 99 (E) Specifications [VIDEO INPUT/OUTPUT] Component input connectors: BNC a 4 (sources 1/2/3/4) Y: 1.0 Vp-p, 75 h Pb/Pr (525): 0.525/0.757 Vp-p switchable, 75 h Pb/Pr (625): 0.7 Vp-p, 75 h Composite input connectors: BNC a 8 (sources 1 to 8), 1.0 Vp-p, 75 h YC input connectors: Mini-DIN4 a 4 (sources 1/2/3/4) Y: 1.0 Vp-p, 75 h C: 0.286 Vp-p, 75 h (525)/0.3 Vp-p, 75 h (625) EXT (external input) connector: BNC a 1 (Y/Pb/Pr), Analog component signals Y: 1.0 Vp-p, 75 h Pb/Pr (525): 0.757 Vp-p, 75 h Pb/Pr (625): 0.7 Vp-p, 75 h Key: BNC a 1, 1.0 Vp-p, 75 h A

  • Panasonic AG-MX70E, 18 (E) ENGLISH Through connection System Diagram AG-MX70 PC (with MX-Navi already installed) ADV-REF ADV-REF CPST Through connection Through connection Through connection Through connection Termination Termination Termination Y, Pb, Pr KEY (Genlock enabled as genlock source) KEY G/L (Genlock enabled as genlock source) Y, Pb, Pr SDI IN2 SDI OUT SDI (Video) SDI (Video) SDI (Video) SDI (Video) SDI (Audio/Video) SDI (Audio/Video) SDI IN3 SDI IN4 Y, Pb, Pr Y, Pb, Pr CPST SDI IN2 SDI IN3 SDI IN4 MIC USB Box camera Box camera Box cam

Related Products and Documents (Mixer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Smeg SWM 128 PT Operation & user’s manual smeg/swm-128-pt-B42.pdf 15 Feb 2023 29 0.78 Mb
2 Life Fitness Exercise Bike LC-5500(BELT) Parts list life-fitness/exercise-bike-lc-5500-belt-Z61.pdf 11 Sep 2022 2
3 Epson Stylus Pro 10000 Quick installation manual epson/stylus-pro-10000-53Z.pdf 12 Jan 2023 34 0.3 Mb
4 Altec Lansing MX-5020 Operation & user’s manual altec-lansing/mx-5020-RR7.pdf 16 Feb 2023 16 0.54 Mb
5 Bushnell 20-0880 Instructions bushnell/20-0880-878.pdf 23 Sep 2022 2 0.09 Mb
6 Whirlpool W10096984A Installation instructions manual whirlpool/w10096984a-87Y.pdf 29 Oct 2023 20

Similar Resources:

  • Clatronic

    Profi Cook UM 290

    (54 pages)
    Bedienungsanleitung/Garantie Gebruiksaanwijzing/Garantie • Mode d’emploi/Garantie Instrucciones de servicio/Garantía • Manual de instruções/Garantia Istruzioni per l’uso/Garanzia • Bruksanvisning/GarantiInstruction Manual/Guarantee • Instrukcja obsługi/GwarancjaNávod k použití/Záruka • A használati utasítás/GaranciaРуководс� …
  • Bravetti

    EP552HA

    (4 pages)
    OWNER’S MANUALModel EP552HA/EP552HS120V., 60Hz., 255 WattsEURO-PRO Operating LLCU.S.: 94 Main Mill Street, Door 16 Canada: 4400 Bois-FrancPlattsburgh, NY 12901 St-Laurent, QC H4S 1A7Tel. : 1 (800) 798-7398HAND MIXER …
  • Exquisit

    MH 3001 we

    (49 pages)
    Seite | 1 Handmixer Hand Blender Batteur Handmixers MH 3001 we GEBRAUCHSANWEISUNG INSTRUCTION MANUAL NOTICE D´UTILISATION GEBRUIKSAANWIJZING …
  • Sencor

    STM 3010WH-NAA1

    (24 pages)
    Table MixerUser's manualENEN-1Before turning this appliance on, please read the user's manual thoroughly, even if you are already experienced in using similar appliances. Only use the appliance in the manner described in this user's manual. Keep this manual for future use. 2014 11/2014STM 3010WH-NAA1 / STM 3011GR-NAA1STM 3012BL-NAA1 / STM 30 …
  • KitchenAid

    5KSM3311X

    (16 pages)
    Stand Mixer5KSM3311XEN Use and Care Manual 2DE Gebrauchs- und Pflegeanleitung 17FR Manuel d’utilisation et d’entretien 31IT Manuale d’uso e manutenzione 47NL Gebruiks- en onderhoudshandleiding61ES Manual de uso y cuidado 75PT Manual de utilização e manutenção89EL Εγχειρίδιο Χρήσης και Φροντίδας 103SV Handbok för skötse …
  • Edirol

    V-4

    (2 pages)
    V-4 4-channel Video MixerReal-time video mixing brings video to life.In an increasing world of video and audioconvergence, the V-4 leads the way for liveperformance with video. Designed forinstalls or portable applications, the V-4 isperfect for VJ's, nightclubs, stages,theaters, worship and conferences.Features• 4-Channel Video Mixer With 3 OutputsFo …

Comments, Questions and Opinions: