Cisco SFS-7012 - SFS InfiniBand Server Switch 7012 Hardware User's Manual
|
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 85 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 APPENDIX B Command Line Interface This appendix includes the following information: • Commands and Functional Groups, page B-86 • Accessing the CLI, page B-87 • Groups and Commands, page B-88 Overview This section details the usage of the Command Line Interface (CLI) feature for the Cisco SFS 7012™. The CLI allows the user to perform remote configuration and management tasks, which in many respects mirrors the functionality of the Chassis Viewer GUI. The CLI is
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 70 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Leaf and Spine Module IB Port Statistics To access IB port statistics for a specific leaf or spine module, perform the following steps. Leaf Modules Step 1 Select a leaf module. The leaf module view is displayed. 1. From the Leaf Port Stats menu, select IB Port Stats. Figure 3-41 Leaf Port Stats Menu The leaf port statistics window is displayed: Figure 3-42 Leaf Port Statistics Window For information on the each IB port statistic field, refer to the section Port Statistics Field Descriptions, page 3-68 Spine Modules Step 1 Select a spine module. The s
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 12 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Aviso Este produto requer proteção contra curto-circuitos (sobreintensidade de corrente), que deve estar instalada nos edifícios. Instale apenas de acordo com as normas de instalação elétrica nacionais e locais. Advertencia Este producto necesita estar conectado a la protección frente a cortacircuitos (sobretensiones) que exista en el edificio. Instálelo únicamente en conformidad con las regulaciones sobre cableado, tanto locales como nacionales, a las que se tenga que atener. Var
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 28 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Figure 2-11 SFS 7012 Chassis Front View Figure 2-12 SFS 7012 Chassis Back View Step 1 Connect a Category 5 or 6 (Cat 5/6) Ethernet cable to one of the RJ-45 connectors on the SFS 7012. Connect the other end of the Cat 5/6 to the OOB LAN workstation. Refer to Figure 2-12 for which RJ-45 connector(s) to use: Step 2 Connect the switch to IB-enabled hosts using 4X-to-4X IB cables. Note Make sure all cables latch securely into the corresponding port conn
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 32 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Step 1 Ensure that the spine module is connected to a COM port on a serial terminal device via the RS-232 port. Step 2 Get to a [boot]: prompt by following Step a or b. a. If the managed spine is running, enter the following command at the console: reboot Then press Enter. b. If the managed spine is not running, power on the switch. Step 3 After selecting image1 or image2, press the Spacebar to interrupt the auto load sequence before the counter e
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 3 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter • Available power (all fiber): 879 Watts max • Available air flow: 200 cfm • Thermal status reporting to CME via IBML • Up to one hundred forty-four (144) 4X IB external copper ports • Two (2) RJ-45 connectors for 100BASE Ethernet connection to management LAN. • One (1) RJ-11 serial port per spine module for configuration. Chassis Viewer Software The Chassis Viewer is Cisco”s browser-based management software. Primary functions of Chassis Viewer for the SFS 7012 switch and its associated components include: • Management • Configuration
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, Contents v Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Capture 92 Deprecated 93 APPENDIX C Troubleshooting 95 Hardware Checks 95 Switch 95 Problem 95 Fix 95 Power Supply 95 Problem 95 Fix 95 Problem 96 Fix 96 OOB Ethernet RJ45 Port 96 Problem 96 Fix 96 SFS 7012 Leaf Module IB Ports 96 Problem 96 Fix 96 Troubleshooting Scenarios 97 InfiniBand 97 Invalid IP Address entered for SWC via Console Port 97 Bad IB Cable 97 Improperly Seated IB Cabl
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 2 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter SFS 7012 Product Specifications Mechanical/Thermal/Power Specifications • 7U - 19" rack mount environment • Integrated thermal management • Front-to-back airflow • Hot plug, redundant cooling • Hot plug, redundant power supplies • 90/264 VAC operation • 50/60 Hz Frequency • Redundant, isolated AC inputs • FCC and VCCI compliant • U.L. Listed Thermal Management Features • Four (4) fan trays, hot plug, N+1 fans • Two (2) fans per tray, 60mm, 12VDC • Available air flow: 200 cfm @ .20 in H2O • Expected air velocity on the switch chip: 400 lfpm • F
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 23 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Step 1 Install the caged nuts into the 2 back holes (chassis leaf module side) and the top and bottom holes (chassis fan side) in the front of the rack. Note The 2 front holes should match up with the top and bottom holes of the rail front flange. All holes should correspond to the rail mounting positions (i.e., the holes marked with pen or tape). Step 2 Fasten the rail back flange (chassis leaf module side) to the rack by installing two screws into the rail and rack. Figure 4 Rail Back Flange Step
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 63 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Step 1 From the menu, select SNMP Step 2 Click Filter Status. The SNMP Filter Status screen is displayed. Figure 3-34 Filter Status Screen Setting Community Strings The Set Community Stings screen allows the user to set two SNMP community names: • Read Only Community Name • Read/Write Community Name Figure 3-35 Set Community Strings Button To set the Community Strings: Step 1 Click SNMP Step 2 Click Set Community Strings. The Set Community S
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 6 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter An SMA also runs on every InfiniBand-capable server that is equipped with an HCA. As shown in Figure 1-3 the Subnet Manager interacts with these SMAs to discover information about the nodes on the fabric. Figure 1-3 InfiniBand Managers and Agents The Subnet Manager utilizes the agent information to discover and manage connections from the SFS 7012 to the InfiniBand fabric. The Subnet Manager maintains a database tracking subnet topology information as a result of its interaction with the SMAs. InfiniBand General Services Managers and Agents The InfiniB
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 27 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Figure 2-9 SFS 7012 Chassis — Spine Module Slot Numbering b. Leaf Modules— Leaf modules should be populated beginning with slot 1, then slot 2, then slots 3 through 12 respectively. Refer to Figure 2-10: Figure 2-10 SFS 7012 Chassis — Leaf Module Slot Numbering Step 2 To install a module or filler, hold it so that the ejector handles are on the bottom. Step 3 Pull the handles out to extend them. Slide the module into the appropriate slot of th
xiv Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Submitting a Service Request Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Ser
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 39 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Step 2 The system prompts for a user name. At the prompt enter: admin Step 3 The system prompts for a password. At the prompt enter: adminpass The system responds with: Welcome to the SFS 7012 CLI. Type 'list' for the list of commands. Step 4 To reboot multiple spines on the SFS 7012 enter the following command: reboot now -m -n where: • now initiates the reboot process as soon as the user presses Enter (i.e., no system y/n prompt). • -m reboots just the management card
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 46 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Step 1 Mouse over the outer region of the leaf module view. The edges of the chassis are highlighted green as shown in Figure 3-11 below: Figure 3-11 Leaf Module Chassis Mouseover Left click the mouse. The chassis view will be displayed. Step 2 The second way is to mouse over the outer region of the spine module view. The edges of the chassis are highlighted green as shown in Figure 3-12 below: Figure 3-12 Spine Module Chassis Mouseover Left click the mouse. The chassis view will be displayed.
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 16 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Rack Specifications and Recommendations The SFS 7012 switch is designed to be installed in an existing 19-inch equipment rack or server rack. The SFS 7012 switch is designed for a four-post server cabinet. It is not designed for a two-post telco cabinet. Racks should conform to conventional standards. In the United States, use American National Standards Institute (ANSI)/Electronic Industries Association (EIA) standard ANSI/EIA-310-D-92, and International Electrotechnic
71 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Figure 3-44 Spine Port Statistics Window For information on the each IB port statistic field, refer to the section Port Statistics Field Descriptions, page 3-68 Set Field Thresholds The Set Field Thresholds screen allows the user to set, for a specific parameter(s), an error message threshold for the
74 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Figure 3-47 Switch Time Service To set the system time: Step 1 From the menu, click Time Service. Step 2 Click Set System Time. The System Time Information screen is displayed: Figure 3-48 System Time Information Screen To use NTP: Step 1 Click the Use Network Time Protocol? checkbox. Step 2 Enter the IP add
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, CHAPTER 1 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 1 Product Overview The Cisco SFS 7012™ is an industry leading modular system used for creating large, single-system Grid/Cluster server fabrics, or as a building block for larger fabrics. The SFS 7012 is designed to maximize performance, streamline operations, and ensure uptime by providing full hardware and software reliability, availability, and serviceability (RAS) features. Leveraging InfiniBand (IB) — an industry-standard interconnect — the SFS 7012 provides high performance, offering a full
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 56 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Debug message levels 1 through 5: Debug messages are for supplier and/or Cisco engineering use and are not necessarily indicative of actions that an end user may need to take. – DEBUG1 – Messages that describe the states of connections and links. – DEBUG2 – Messages that describe major configuration changes or operations. – DEBUG3 – Messages that describe the I/O flow. – DEBUG4 – Messages that contain the packet dumps within an I/O flow. I/O flows contain
vii Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 New and Changed Information The Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide applies to the SFS 7012 Release 3.1 or later. Table 1 lists the new and changed features available with each supported SFS 7012 release. Ta b l e 1 Documented Features for the Cisco SFS 7012 InfiniBand Server Switch Har
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 97 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Appendix Troubleshooting Scenarios InfiniBand This section documents common problems seen with the SFS 7012 switch. Invalid IP Address entered for SWC via Console Port Symptoms Cannot access the Chassis Viewer browser window. The browser window times out and Chassis Viewer will not come up. Resolution / Workaround Invalid IP Address entered for switch card via the console port. Make sure configuration is using a valid IP address for the Switch (make sure initial
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 67 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter SFS 7012 Port Statistics The Chassis View Port Statistics area provides IB port information for all of the external and internal ports of the SFS 7012. Figure 3-39 IB Port Statistics To view port statistical information, do the following: Step 1 From the Chassis View Port Statistics submenu, select IB Port Stats. The IB Port Statistics window is displayed: Figure 3-40 IB Port Statistics Understanding Port Naming Conventions Following is an explanati
34 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter md5 values match! 11088736 Starting at 0x80010000... sysI REGS BOOT Initializing HyperTransport bus HyperTransport initialization completed Found Intel Strata Flash 128 MBit (0x8918). Mounted raw file system on device /image1. (size=6291456 bytes) Mounted raw file system on device /image2.
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, Contents i Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 New and Changed Information vii Preface ix Audience ix Organization ix Conventions x Related Documentation x Obtaining Documentation x Cisco.com x Product Documentation DVD xi Ordering Documentation xi Documentation Feedback xi Cisco Product Security Overview xi Reporting Security Problems in Cisco Products xii Product Alerts and Field Notices xii Obtaining Technical Assistance xiii Cisco Techn
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 10 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Warning This unit is intended for ins
Cisco SFS-7012 - SFS InfiniBand Server Switch 7012, 47 Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide OL-8787-04 Chapter Figure 3-13 Chassis Viewer Component Details Area Chassis View Component Details Area The Component Details Area contains three areas. • Details Header • Information area. • Menu Chassis Details Header The Chassis Details Header allows the user to execute the most common tasks for the SFS 7012 switch: • Display the Home page • Reboot • View FRU • View Log Figure 3-14 Chassis Details Header Rebooting Components from Chassis Viewer Step 1 From the Chassis Details header, click Reboot. A screen similar to the foll
Cisco 7505 Switch Quick start manual
7505 |
Cisco SR216 Switch Datasheet
SR216 |
Cisco 2950SX-48 Switch Datasheet
2950SX-48 |
Cisco SD208 Switch Datasheet
SD208 |
Cisco 1841 - 1841 Integrated Services Router Switch Hardware installation manual
1841 - 1841 Integrated Services Router |
Cisco HWIC-4ESW - EtherSwitch HWIC Switch Switch Operation & user’s manual
HWIC-4ESW - EtherSwitch HWIC Switch |
Cisco Catalyst 3030 Switch Command reference manual
Catalyst 3030 |
Cisco IE-3000-8TC Switch Administration manual
IE-3000-8TC |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Honda | Connex SCD20 | Operation & user’s manual | honda/connex-scd20-7X8.pdf | 08 Nov 2022 | 16 | 0.54 Mb |
2 | Cerwin-Vega | CLS-10 | Specifications | cerwin-vega/cls-10-CI1.pdf | 06 Nov 2022 | 3 | 0.14 Mb |
3 | Philips | 46PP9545 | Manual | philips/46pp9545-1V1.pdf | 16 Jul 2023 | 36 | 2.56 Mb |
4 | Panasonic | CU-5MX1SPP | Operation manual | panasonic/cu-5mx1spp-QTV.pdf | 30 Jun 2023 | 9 | 0.67 Mb |
5 | Wolf | L342212 | Planning information | wolf/l342212-543.pdf | 11 Apr 2023 | 8 | 0.35 Mb |
6 | HP | D7171A - NetServer - LPr | Introduction manual | hp/d7171a-netserver-lpr-TJR.pdf | 02 Jul 2023 | 9 | 0.17 Mb |
Haibrain
SS13 LIMLINE WIRELESSWITCHUSER MANUAL 3GEBRAUCHSANLEITUNG 10GUIDE UTILISATEUR 16MODO DE EMPLEO 23MANUALE D’ISTRUZIONI 30GEBRUIKSAANWIJZING 3720146/20061012 • SS13TM SLIMLINE WIRELESS SWITCH ALL RIGHTS RESERVED HAIBRAIN © 2007TMSS13 SLIMLINE WIRELESSSWITCH
…
SS13(46 pages) |
Westinghouse
Instruction Leaflet30-471 (E)Page 1Westinghouse CanadaElectronics, Control and Distribution Products DivisionSeptember, 1984New InformationRobonic II AutomaticTransfer SwitchesOperation andMaintenance ManualIndexWarranty ......................................... 2Westinghouse Offices ..................... 3General Description ........................ 4Compon …
30-471 (E)(14 pages) |
LevelOne
1 GES-1652 / GES-2452 16 / 24 GE + 2 GE SFP Web Smart Switch Quick Installation Guide English Deutsch Français Español Nederlands Dansk Italiano Ελληνικά Português Svenska Slovenščina 繁體中文 한국어 Русский Polski
…
GES-1652(17 pages) |
Digi
90033900CEIA-422 Mode (EtherLite 2 or 162 only)To operate a port of the EtherLite 162 EIA-422 in EIA-422 mode, set the port’s EIA-422 ENABLED switch to the up position. Set the TERMINA-TION (422 ONLY) switch to the down position. This switch connects a 120 ohm, 1/2 watt resistor across the input signals.EtherLite 2 EIA-422 ports are hard-wired to EIA-422 m …
EL 2(2 pages) |
Comtech EF Data
IMPORTANT NOTE: The information contained in this document supersedes all previously published information regarding this product. Product specifications are subject to change without prior notice. Part Number MN/CRS150.IOM Revision 2 CRS-150 1:1 Redundancy Switch Installation and Operation Manual Accessory Product for use only with Comtech EF Data CDM-600 …
CRS-150(76 pages) |
Cisco
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883Cisco Catalyst Blade Switch 3130 for Dell Command ReferenceCisco IOS Release 12.2(40)EX1December 2007Text Part Number: OL-13271-01
…
3130(984 pages) |
Morphy Richards Kettle IBELEGANTEKKettle PDF Manual IBELEGANTEK, 6 |
BT Telephone VERVE 3000 EXECUTIVETelephone #J68442 VERVE 3000 EXECUTIVE, 39 |
POLTI Steam Cleaner VAPORETTO CLEANPOLTI VAPORETTO CLEAN Guide (Usage instructions), @IX1VX8 VAPORETTO CLEAN, 8 |
Yamaha Offroad Vehicle ULTRAMATIC GRIZZLY 660 YFM660FRYamaha ULTRAMATIC GRIZZLY 660 YFM660FR User Manual (Owner's manual), @462P71 ULTRAMATIC GRIZZLY 660 YFM660FR, 444 |
Micromax Cell Phone A56Micromax Cell Phone User giude (File: micromax-a56-cell-phone-44, Thursday 02-11-2023) A56, 44 |
Vook DVR VDT2504HEDVR #B39HT3 VDT2504HE, 116 |
Cygolite Bicycle Accessories MITYCROSS 800#7JU453 MITYCROSS 800: Cygolite Bicycle Accessories Owner Documentation MITYCROSS 800, 2 |
Chamberlain Garage Door Opener CG40SGarage Door Opener Owner's manual (Chamberlain CG40S) CG40S, 40 |
Blue Rhino Grill NSG3902DPDF User Manual (@J3A55K), Blue Rhino NSG3902D Grill (04.02.2024) NSG3902D, 18 |
iSP Technologies Subwoofer Vector 112Owner's manual for iSP Technologies Vector 112 Subwoofer Vector 112, 5 |
Yamaha Other CR-2020CR-2020 (Other ePDF Guide, #F242Q1) CR-2020, 30 |
Puregas Dehumidifier P550WPuregas P550W User Manual (Installation manual), @1PA18X P550W, 7 |