Manualios.com

Unical MFCS 12HI Operation & User’s Manual

Unical MFCS 12HI Manual Online:

4.75, 697 votes
Unical MFCS 12HI User Manual
Unical MFCS 12HI User Guide
Unical MFCS 12HI Online Manual

Text of Unical MFCS 12HI User Guide:

  • Unical MFCS 12HI, 18 Elenco errori Error Codice di errore Protezione alta pressione E1 Protezione bassa pressione E3 Protezione mandata refrigerante E4 Protezione per sovra-corrente P5 Errore di comunicazione E6 Anomalia portata acqua E9 Conflitto modalità di funzionamneto E7 Protezione antigelo E2 Sbrinamento o ritorno olio in riscaldamento H1 Errore sensore temperature ambiente interno F1 Errore sensore temperatura evaporatore F2 Errore sensore temperature ingresso evaporatore (liquid valve) b5 Errore sensore temperature ingresso evaporatore (gas valve) b7 Errore sensore temperature condensatore A5 Errore sensore temperature intermedio cond

  • Unical MFCS 12HI, 27 1.3 Introduction to the Symbols on LCD 2 Buttons 2.1 Buttons on the Wired Controller No Symbols Description 1 Swing function. 2 Sleep function (3 types: sleep 1,sleep2 and sleep 3). 3 Running modes of the indoor unit (Cooling, Dry, Fan and Heating). 4 Defrosting function for the outdoor unit. 5 Gate-control function (this function is yet unavailable for this unit). 6 Lock function. 7 High, middle, low or auto fan speed of the indoor unit. 8 SHIELD Shield functions. 9 TURBO Turbo function. 10 MEMORY Memory function (The indoor

  • Unical MFCS 12HI, 17 3.13 Altre funzioni a Blocco tasti Premendo contemporaneamente i tasti e per 5 secondi, si attiverà la funzione di blocco tasti. In questo caso sul display LCD apparirà il simbolo . Dopo di che premere nuovamente questi due tasti contemporaneamente per 5 secondi per uscire da questa funzione. Nello stato di Blocco ogni altro pulsante premuto non darà nessuna risposta. b. Memoria La funzione Memoria viene attivata o disattivata tenendo premuti contemporaneamente I tasti Mode e a unità spenta. Sul display apparirà la scritta “Memory”: con tale funzione attiva

  • 33 c. Sleep 3 Sleep curve setting under Sleep 3(DIY mode) d.Under the mode of Sleep 3, press Timer to enter the Sleep setting. In this case, “1 HOUR” is displayed where the timing value once is displayed and the corresponding temperature with the last Sleep curve setting is displayed where the ambient/preset temperature once in displayed. e. Press or to change

  • Unical MFCS 12HI, 43 12) SWING UP/DOWN ( ) The swing angle which circularly changes as below can be selected by pressing this button: This kind of remoter controller is universal. And the three swing statuses of are the same as that of . If the swing function is deactivated when the air guide louver is swing up and down, it will stop at the current position. indicates that the air guide louver swings up and down among all five positions. 13) AIR ( ) AIR ON or Air OFF can be selected by pressing this button. 14) TIMER ON “ON” will be displayed and blink for 5 seconds by

  • 10 Fig.11 Curva temperatura Sleep 2 in modalità raffreddamento. Nella modalità di riscaldamento la temperatura può essere impostata a 16 o tra 17 - 20 , 21 -27 o 28 - 30°C E le loro curve dell Sleep sono indicate nella Fig.12: Fig.12 Curva temperature Sleep 2 in modalità riscaldamento. Istruzioni d’uso

  • Unical MFCS 12HI, 37 3.11 Blow Setting Blow function: After the unit is turned off, the water in evaporator of indoor unit will be automatically evaporated to avoid mildew. In the Cooling or Dry mode, press Function till the unit enters the Blow setting interface and then press Enter/Cancel to active this function. When the Blow function is activated, press Function to the Blow setting interface and then press Enter/ Cancel to cancel this function. Blow function setting is as shown in Fig.18 Fig.18 Blow Setting Notes: 1) When the Blow function is activated, if turning off the unit by pressing On/Off or by the remote controll

  • Unical MFCS 12HI, 5 1.3 Introduzione ai simboli del display LCD Istruzioni d’uso 2 Tasti del comando digitale 2.1 Tasti del comando No Simboli Descrizione 1 Indicatore funzione SWING 2 Indicatore funzione riduzione notturna SLEEP (3 tipi: sleep 1,sleep2 e sleep 3). 3 Indicatore delle modalità di funzionamento dell’unità interna (Raffreddamento, Deumidificazione, Ventilazione e Riscaldamento). 4 Indicatore della funzione di sbrinamento dell’unità esterna . 5 Indicatore della funzione di controllo GATE ( funzione non attiva per questa unità). 6 Indicatore blocco tasti. 7 Indicatore velocità della vento

  • Unical MFCS 12HI, 32 Fig.11 Sleep Curve of Sleep 2 in Cooling Mode In the Heating mode, the temperature may be set at 16°C or between 17°C - 20°C, 21°C -27°C or 28°C - 30°C and their Sleep curves are shown in Fig.12: Fig.12 Sleep Curve of Sleep 2 in Heating Mode For example, the temperature in the Heating mode is set at 22°C.Under the mode of Sleep2, the temperature will decrease by 1°C every 1hr. After it decreases by 2°C in total, i.e. 20°C,the unit will keep running at 20°C. User’s Instructions

  • 29 3.2 Mode Setting Under the “On” state of the unit, press Mode to switch the operation modes as the following sequence: Cooling-Dry-Fan-Heating. 3.3 Temperature Setting Press or to increase/decrease the preset temperature. If press either of them continuously, the temperature will be increased or decreased by 1°C every 0.5s,as shown in Fig.6. In the Cooling, Dry or Heating mod

  • Unical MFCS 12HI, 6 2.2 Funzione tasti del telecomando No. Nome Funzione 1 Enter/cancel 1) Attivare o annullare una funzione. 2) Premere per 5 secondi per esaminare la temperatura esterna. 2 1) Impostazione della temperatura dell’unita’ interna , da 16 a 30°C 2) Impostazione del timer, da:0.5 a 24 hr. 6 3) Commutazione fra funzione quiet/auto quiet o modalità sleep1/sleep2/sleep 3. 3 Fan Impostazione della velocità della ventola (alta/media/bassa/auto). 4 Mode Impostazione della modalità di funzionamento dell’unità interna (raffreddamento/risc

  • Unical MFCS 12HI, 36 Fig.16 Save Setting for Heating Notes: 1) If press Function on the Save setting interface or if there is not any operation for 5s after last button press, the Save setting will be canceled automatically by the system, with memorizing the present setting data. 2) When power is on after the power failure, the Save function will be memorized. 3.10 E-heater Setting E-heater (auxiliary electric heating function): In the Heating mode, E-heater is allowed to be turned on for improvementof efficiency. Once the wired controller or the remote controller enters the Heating mode, this function will be turned on automatically. Press Function in the Heating mode to enter the

  • Unical MFCS 12HI, 35 3.9 Save Setting Save: Energy saving which will result the air conditioner runs in smaller temperature range is realized by setting lower limited value in the Cooling or Dry mode and upper limited value in the Heating mode. Save Setting for Cooling: Under the “On” state and in the Cooling or Dry mode of the unit, press Function to enter the Save setting interface and then press or to adjust the lower limited value in the Cooling Mode. After that, press Enter/ Cancel to activate the Save function. The initial lower limited value in the Cooling mode is 26°C. When the Save function is activated, press Funct

  • Unical MFCS 12HI, 4 1 Comando a filo 1.1 Vista del comando a filo Fig.1 Vista del comando a filo 1.2 Display LCD del comando a filo Fig.2 Display LCD del comando a filo Istruzioni d’uso ®

  • Unical MFCS 12HI, 12 3.8 Impostazione Turbo L’unità può funzionare con una velocità “turbo” della ventola per raggiungere un rapido raffreddamento o riscaldamento, in modo che la temperatura della stanza può velocemente avvicinarsi al valore di impostazione. Nella modalità raffreddamento o riscaldamento premere il tasto “ Function” fino a raggiungere l’impostazione Turbo e quindi premere Enter/Cancel per confermare l’impostazione. Quando la funzione Turbo è attivata, premere il tasto “ Function” per accedere alle impostazioni Turbo e quindi premere Enter/Cancel per annullare questa funzione. L’impostazione della funzione Turbo è mostrata nella F

  • Unical MFCS 12HI, 2 Leggere attentamente le precauzioni ed eseguire correttamente le procedure. ATTENZIONE! Non tentare di installare da se il climatizzatore; rivolgersi sempre a personale autorizzato. -In caso di guasto o mal funzionamento rivolgersi sempre a personale di servizio autorizzato; qualsiasi tentativo di rimozione di parti, o di manutenzione dell’apparecchio può esporre l’utente al pericolo di scosse elettriche. Il climatizzatore non contiene parti la cui manutenzione può essere effettuata dall’utent

  • Unical MFCS 12HI, 38 3.12 Quiet Setting Quiet function consists of two kinds: quiet and auto quiet. Press Function till the unit enters the Quite setting interface, with “Quiet” or “Auto” blinking. In this case, press or to switch between Quiet and Auto and then press Enter/cancel to make a confirmation. When the Quiet function is activated, press Function till the unit enters the Quite setting interface, with “Quite” or “Auto” blinking. Then press Enter/cancel to cancel this function. Quiet function setting is as shown in Fig.3.

  • Unical MFCS 12HI, 31 3.7 Sleep Setting Sleep on: Press Function under on state of the unit till the unit enters the Sleep setting interface. Then setting press or to switch among Sleep1, Sleep 2 and Sleep 3. After that, press Enter/cancel to confirm the setting. Sleep off: When the Sleep function is activated, press Function to enter the Sleep setting interface. After that, press Enter/cancel to can this function. Sleep setting is shown as Fig.10. Fig. 10 Sleep Setting Sleep off is def ault after power failure and then power recovery, and

  • Unical MFCS 12HI, 40 Meaning of Each Error Error Code High pressure protection E1 Low pressure protection E3 Discharge protection E4 Over-current protection P5 Communication error E6 Indoor water overflow protection E9 Mode conflict E7 Anti-freezing protection E2 Defrosting or oil returning for heating H1 Indoor ambient temperature sensor open/short circuit F1 Evaporator temperature sensor open/short circuit F2 Indoor unit (liquid valve) refrigerant pipe inlet temperature sensor error b5 Indoor unit (gas valve) refrigerant pipe outlet temperature sensor error b7 Condenser coil inlet temperature sensor open/short circuit A5 Condenser coil midway temperature sensor error F4 Condenser coil outlet tempe

  • Unical MFCS 12HI, 15 Funzione Blow: Dopo aver spento l’unità, il ventilatore continuerà a funzionare per evaporare eventuale condensa che potrebbe originare muffe. Nella modalità raffreddamento / deumidificazione, premere il tasto “Function” fino a lla visualizzazione della funzione Blow e quindi premere il tasto Enter/Cancel per attivare questa funzione. Quando la funzione Blow è attiva, premere il tasto “ Function” per accedere all’ impostazioni Blow e quindi premere il tasto Enter/Cancel per annullare questa funzione. L’impostazione della funzione Blow è mostrata nella Fi

  • Unical MFCS 12HI, FILTER CLEANING Filter cleaning is essential for the good working order of the air conditioner ANTI-DUST FILTERS · Withdraw the filters by pulling them gently sideways and pressing lightly on the indicated points (fig.3). · Clean the filters with a vacuum cleaner or wash them with warm water and mild detergent. · Make sure the filters are dry before replacing them back in the appliance. · Do not expose the filters to sunlight. · Never operate the air conditioner without the air fil ters. END OF SEASON MAINTENANCE · Clean and replace the filters. · On a sunny day leave the air conditioner running in fan mode for a few hours to allow the inside of the

  • 23 Istruzioni d’uso PULIZIA DEI FILTRI Per un buon rendimento del climatizzatore, la pulizia dei filtri è essenziale. FILTRI ANTIPOLVERE · Estrarre i filtri sfilandoli lateralmente, esercitando una leggera pressione nei punti indicati (fig.3). · Pulirli con l’aspirapolvere o lavarli con acqua tiepida e detersivo neutro. · Prima di rimetterli in posizione asciugarli bene. · Non lasci

  • 42 3) SLEEP Sleep On and Sleep Off can be selected by pressing this button. After powered on, the default is Sleep Off. After the unit is turned off, the Sleep function is canceled. When the sleep function is set already, the symbol will be displayed. And at this time, the time of timer can be adjusted. Under Fan and Auto modes, this unction is not available. 4) FAN Au

  • Unical MFCS 12HI, 41 Wireless Remote Controller Notes: 1) Be sure that there are no obstructions between the receiver and the remote controller. 2) Do not drop or throw the remote controller. 3) Do not let any liquid into the remote controller. 4) Do not expose the remote controller to direct sunlight or any place where is very hot. 5) This is a general use remote controller. If press some button which is not available for the corresponding function, the unit will keep the original running status. 1 Function of Press Buttons: Fig.21 1) ON/OFF ( ) Press this button to turn on/off the unit. After that, the sleep function will be ca

Related Products and Documents (Air Conditioner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Craftmade K52 Specifications craftmade/k52-Q9A.pdf 26 Sep 2023 1 1.17 Mb
2 Spyclops SPY-DVR4 Instructions manual spyclops/spy-dvr4-3UQ.pdf 02 Nov 2023 17
3 Sharp LL-M17W1 - WXGA LCD Computer Operation manual sharp/ll-m17w1-wxga-lcd-computer-RX1.pdf 03 Nov 2022 196 9.34 Mb
4 Contemporary Research ICW-STA Product manual contemporary-research/icw-sta-GM4.pdf 20 Jul 2023 22 0.44 Mb
5 POWER ON BOARD VEC1095APOB Owner's manual power-on-board/vec1095apob-5U6.pdf 27 Jul 2022 12
6 ASROCK AM1H-ITX Operation & user’s manual asrock/am1h-itx-6U7.pdf 22 Feb 2024 62 3.43 Mb

Similar Resources:

  • Hitachi

    RAM-68NP3B

    (79 pages)
    NO. 0585ESPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENTROOM AIR CONDITIONEROUTDOOR UNITJANUARY 2015 Refrigeration & Air-Conditioning DivisionSERVICE MANUALPMRAM-68NP3BREFER TO THE FOUNDATION MANUALTECHNICAL INFORMATIONFOR SERVICE PERSONNEL ONLYCONTENTSSPECIFICATIONS --------------------------------------------------------------------- …
  • easymaxx

    TS-20964R

    (42 pages)
    3 DEInhaltLieferumfang _______________________________________________________ 4Legende __________________________________________________________ 4Bestimmungsgemäßer Gebrauch _______________________________________ 5Sicherheitshinweise _________________________________________________ 5Funktionsübersicht ______________________________________________ …
  • Galanz

    AUS-09C(H)53R130Dx

    (48 pages)
    Split air conditionerWall mounted TypeService manualAUS-12C(H)53R130Dx AUS-18C(H)53R220Dx AUS-18C(H)53R120DxAUS-09C(H)53R130Dx(X=1,2,3 ) AUS-18H53R230Dx …
  • LG

    AKWW0603UA0

    (36 pages)
    LG Water Cooled PackageAir ConditionerINSTALLATION MANUALLGMODELS: AKWW0603UA0AKWW0483UA0AKWW0363UA0website http://www.lgservice.come-mail http://www.lgeservice.com/techsup.htmlIMPORTANT• Please read this instruction sheet completely before installing the product.• When the power cord is damaged, replacement work shall be performed by authorized person …
  • Cooper & Hunter

    Sophia CH-S30FTXW-SV

    (22 pages)
    HIGH-WALL DUCTLESSAIR CONDITIONING &HEATING SYSTEMOWNER'S MANUALModels:CH-S30FTXW-SV (230V)CH-S36FTXW-SV (230V)SOPHIAIMPORTANT NOTE:Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this manual for future reference. …
  • GE

    AHH18DQT1

    (32 pages)
    GEAppliances.com00_Safety Instructions ............. 2, 3Operating InstructionsControls ........................... 4-6Care and CleaningAir Filter .............................. 6Outdoor Coils ......................... 6Installation Instructions ...... 7-12Troubleshooting Tips ............ 13Normal Operating Sounds ............ 13Consumer SupportConsumer Sup …

Comments, Questions and Opinions: