Manualios.com

JVC HD-52G587 Operation & User’s Manual

  • HD-52G587 Projection Screen
  • mavC2yqglzS/s
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 72

JVC HD-52G587 Manual Online:

3.55, 905 votes
JVC HD-52G587 User Manual
JVC HD-52G587 User Guide
JVC HD-52G587 Online Manual

Text of JVC HD-52G587 User Guide:

  • JVC HD-52G587, 57 Button Functions The display screen shows the current status of timers, inputs and XDS ID. Press the D ISPLAY button The screen to the right shows the following information: • The current AV input • The current time (12:20 pm) • Sleep timer status/minutes remaining (The Sleep Timer is off) • Each Press of the D ISPLAY button changes the display mode: Display - Full screen shown above Time - Shows the current time only Input - Shows the current input Off - Turns display off Notes: • You may also turn off the display at any step by pressing M ENU. • If the clock or sleep timer are not set, the display screen will show: �

  • JVC HD-52G587, 26 The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “MONITOR” and the other 2-way selector switch to “VCR”. 3) Press and hold down the D ISPLAY button, then enter the first code number listed with the 10 key pad. 4) Release the D ISPLAY button, and confirm the operation of the VCR. • If your VCR does not respond to the first code, try the others listed. If it does not respond to any of the codes, try

  • 19 By connecting an HDMI compatible device, high definition pictures can be displayed on your monitor in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible devices. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface. HDMI provides and interface between any audio/video source, su

  • 37 Press the MENU button π† To V-CHIP √® To operate (lock icon appears) Press ZERO to access V-Chip setup options π† To SET CANADIAN RATINGS ENG (for English) √® To enter ratings menu For example: To block viewing of programming rated 14+ shows, move the cursor to the 14+ column and add a lock icon. Once you've put a lock on the 14+ col

  • 65 While the power is on, and there is a problem with the monitor, the monitor changes to warning mode and informs you of the problem using the LED as follows. Then, the power turns off automatically and performs the cooling for approximately 90 seconds. The LAMP LED blinks Condition: It may be a malfunction of the internal electrical circuits. To correct: Keep

  • JVC HD-52G587, 40 Onscreen Menus This function automatically shuts off your monitor when there is no signal from the input the monitor is on. Press the M ENU button π† To AUTO SHUT OFF √® To turn ON or OFF Press the M ENU button when finished • If the input that you have on does not receive a signal for more than one minute, the blinking text “NOT RECEIVING A SIGNAL AUTO SHUT OFF IN 9 MIN.” appears on the screen, and starts the countdown. If no signal is being received within 10 minutes, the monitor shuts itself off. Auto Shut Off INITIAL SETUP S

  • JVC HD-52G587, 9 AA Batteries x 2 Monitor x 1 Remote Control x 1 Note: Your monitor and/or remote control may differ from the examples illustrated here. Quick Setup Thank you for your purchase of a JVC projection monitor. Before you begin setting up your new monitor, please check to make sure you have all of the following items. In addition to this guide, your monitor box should include: + AA Alkaline – + AA Alkaline – POWER DISPLAY SLEEP TIMER LIGHT FREEZE THEATER PRO VIDEO STATUS 1 7 4 * 3 9 6 SET MUTING MENU OK BACK 2 8 0 5 CH + VOL – VOL + REC OPE

  • JVC HD-52G587, 60 Button Functions Use either the monitor’s operation or a cable box to select. Set this switch to MONITOR to operate the monitor. Move the switch to CATV to operate a cable box. Note: • See page 25 for information on programming your remote for cable box operation. You can control a VCR or DVD player with the buttons on the lower part of the remote control. Move the slide switch to VCR or DVD to operate. Notes: • The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s brand VCR, please see the code chart and instructions on page 26. • The remote is preset with the code 000 to contro

  • JVC HD-52G587, 62 Lamp Replacement Lamp Message If this message appears when you turn the monitor on, you need to replace the lamp. See page 63 on how to replace the lamp. Note: • This message will appear every time you turn on the monitor when the lamp needs to be replaced. Press the OK button to make the message disappear, or replace the lamp. LAMP NEEDS TO BE REPLACED. REFER TO OWNER'S MANUAL FOR REPLACEMENT INSTRUCTIONS. AFTER REPLACING THE LAMP, PLEASE RESET TIMER IN THE TV MENU. PRESS OK, IF

  • JVC HD-52G587, 28 Cable/Satellite Search Codes Function 1) Slide the first 2-Way Mode Selector switch to CATV. 2) Press the P OWER and SET buttons. Hold for at least three seconds and release. 3) Press the P OWER button on the remote, and see if the cable or satellite box responds. 4) If there was a response, press SET. The codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the remote control that came with your equipment. 5) Press SET to exit. VCR/DVD Search Codes Function 1) Slide the first 2-way selector switch to “MONITOR” a

  • JVC HD-52G587, 33 You can block programs that are not rated. Press the M ENU button π† To V-CHIP √® To operate (The lock icon appears) Press Z ERO to access V-Chip setup options π† To UNRATED √® To VIEW or BLOCK Press M ENU when done Directions to Block Unrated Programs Onscreen Menus Unrated Programs Unrated programming refers to any programming which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed in the “Unrated Programming” category. Examples of Unrated programs: • Emergency Bulletins

  • JVC HD-52G587, 18 By connecting a Digital TV Receiver, high definition pictures can be displayed on your monitor in their digital form. 1 DIGITAL-IN HDMI 1 R - AUDIO - L HDMI to DVI Cable After the connections have been made, tighten the screw to secure the cables. DTV device Digital Out Audio Out L R Connecting to a Digital TV Receiver 1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to the HDMI1 DIGITAL-IN on the back of your monitor. 2) Connect a red cable from th

  • JVC HD-52G587, 51 The lamp replacement message will appear when you need to change the lamp. After you replace the lamp, you need to reset the timer which is built into your monitor. Press the M ENU button π† To LAMP TIMER RESET √® To Enter The following message will appear. Press the OK button while the above message appears on the monitor screen. The lamp timer has now been reset. Note: • You can use the Lamp Timer Reset only after replacing the lamp. See Page 61 for instructions on lamp replacement. PRESS OK TO RESET THE LAMP TIMER. THE LAMP TIMER IS RESET SUCCESSFULLY. Onscreen Menus Lamp Timer Reset CLOCK / TIMERS SELECT OPERATE EXIT MENU NEXT PAGE PREVIOU

  • JVC HD-52G587, 67 Troubleshooting The following are not malfunctions. • The monitor may make a creaking sound if the temperature of the room or the temperature inside the monitor changes. If there is no problem with the screen or sound, then there is no need to worry. • The lamp may make a noise when it blows, but this is not dangerous. • The lamp may make a noise when the power is turned on and a picture is displayed on the screen. This noise is caused when the mercury inside the lamp is heated, and is not a malfunction. • The still parts of a picture may remain on the screen. This is a characteristic of HD-ILA elements

  • JVC HD-52G587, 15 Quick Setup Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables. • You may also connect the DVD player to Input 1. (See Diagram #2 on page 16). V R L IN O

  • 7 4. The monitor requires a lot of electrical power It is recommended that the monitor is connected directly to the wall socket, and not to another device. When connecting the monitor to a wall socket that is being used by another device, or when using an extension cord, be careful not to exceed the electrical capacity of the socket. Do not turn the power on and off repeatedly i

  • JVC HD-52G587, 6 Thank you for purchasing a JVC HDTV-ready projection monitor which uses the high-quality HD-ILA projection system. This is one of the highest quality and most technologically advanced monitor available today. It is recommended that you read this instruction manual before using your monitor in order to learn about it’s many features. Cautions related to the safe use of the device and important information which will help you to be able to use this device for a long time is in the Appendix. Once again, thank you for purchasing this monitor and please enjoy u

  • JVC HD-52G587, 21 This monitor can be used as a computer screen. Use a commercially available D-SUB cable to connect the monitor's PC INPUT terminal to the computer's analog RGB output terminal. If you want to listen to the sound from the computer, use a commercially available RCA cable to connect the INPUT-3 audio input terminal to the computer's audio output terminal. Connecting to the computer Monitor Rear Panel OVER INPUT-3 PC IN (D-SUB) INPUT-1 INPUT-2 INPUT-3 HDMI 1 INPUT-1 INPUT-2 VIDEO VIDEO VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L Y Pb Pr Y Pb Pr S-VIDEO S-VIDEO O

  • JVC HD-52G587, JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 LCT2065-001A-A ENG.indd 72LCT2065-001A-A ENG.indd 72 3/31/06 9:19:31 AM3/31/06 9:19:31 AM Downloaded from www.Manualslib.com manuals search engine

  • JVC HD-52G587, 12 Quick Setup RM-C1273G • For information on remote control buttons, see pages 52 - 60. • The " * " button can not be used for monitor model HD-52G587 and HD-61G587. POWER DISPLAY SLEEP TIMER LIGHT FREEZE THEATER PRO VIDEO STATUS 1 7 4 * 3 9 6 SET MUTING MENU OK BACK 2 8 0 5 CH + VOL – VOL + REC OPEN/CLOSE STILL/PAUSE STOP PAUSE PLAY FFREW MONITOR CATV VCR DVD -VCR CHANNEL+ PREV NEXT TV/VCR VCR/DVD POWER SOUND CH – MONITOR RM-C1273G ASPECT SWAP SELECT MULTI SCREEN INPUT C.C. TWIN Remote Control LCT2065-001A-A ENG.indd 12LCT2065-001A-A ENG.indd 12 3/31/06 9:19:12 AM3/31/06 9:19:12 AM Downloaded from www.Manualslib.com manuals search engine

  • JVC HD-52G587, 45 Press the MENU button π† To TINT, COLOR, PICTURE, BRIGHT or DETAIL √ ® To enter √ ® To adjust the setting π† To move to the next setting Press the MENU button when finished These settings allow you to change and adjust the way the picture appears on your monitor. TINT Tint allows you to adjust the levels of red and green in the picture. COLOR The color function lets you make all the colors in the picture appear either more vivid or subtle. PICTURE Picture allows you to adjust the levels of black and white on the screen, giving you a darker or brighter picture overall. BRIGHT You can adjust the overall brightness of the pict

  • JVC HD-52G587, 64 Lamp Replacement WARNING! Remember it is very important that YOU DO NOT TOUCH THE LAMP SURFACE. Please read the warnings on page 61 again. Also, replace the lamp with part number TS-CL110U only! The monitor is designed to work specifically with this lamp. Lamps other than TS-CL110U may cause malfunctions and/or other damage to the monitor. To purchase a replacement lamp kit, please call 1-800-252-5722. NOTICE (for USA) This product has a High Intensity Discharge (HID) lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or r

More Instructions:

DOWNLOAD

Related Products and Documents (Projection Screen):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Philips AC4062 Operation & user’s manual philips/ac4062-383.pdf 08 May 2023 45 4.19 Mb
2 Life Fitness 849 Assembly instructions manual life-fitness/849-829.pdf 29 Jan 2023 35
3 Fellowes PS-63t Manual  fellowes/ps-63t-229.pdf 01 Nov 2023 6 2.47 Mb
4 Electrolux B9871-5 Operation & user’s manual electrolux/b9871-5-J13.pdf 19 Mar 2024 52 1.04 Mb
5 Sanus Systems CFAV34 Instruction manual sanus-systems/cfav34-315.pdf 25 Jan 2023 14 3.42 Mb
6 Mellanox Technologies MTS3600Q-1BNC Operation & user’s manual mellanox-technologies/mts3600q-1bnc-81P.pdf 22 Mar 2024 38

Similar Resources:

  • Grandview

    CB-Mxx

    (4 pages)
    Model CB-MxxGRANDVIEW REPRODUCING GENUINE COLORSGRANDVIEW REPRODUCING GENUINE COLORSISO9001:2000International CertificationGrandview Crystal Screen Canada Ltd.#11- 3751 North Fraser Way,Marine Way Business Centre,Burnaby, BC, Canada V5J 5G4Tel: 1-604-412-9777 Fax: 1-604-412-9796Website: www.grandviewscreen.caGuangzhou Grandview Crystal Screen Co., …
  • FrSky

    FLD-02

    (2 pages)
    www.frsky-rc.com2011/0 9 / 09InstructionInstructionInstructionInstruction ManualManualManualManual forforforfor FrSkyFrSkyFrSkyFrSky FLD-02FLD-02FLD-02FLD-021111 IntroductionIntroductionIntroductionIntroduction1.11.11.11.1 SpecificationsSpecificationsSpecificationsSpecificationsModel: FLD-02Compatibility: FrSky DFT, DJT and DHTDimension: 55*40*12 mmPixel: 12 …
  • Remaco

    MAS-1818

    (2 pages)
    Bracket can be used for the following installation as shown below.Installation Guide (For MAS-1818 to MAS-2424)MASOperationPullPull down the screen with lanyard.1 212To Use:1212To Keep:Use hand to set at desired position.Pull down screen slightlyto release.Guide the screen up without releasing the landyard.V: 3.0CCOPYRIGHTS 1998 REMACO TECHNOLOGIES PTE …
  • Screen Research

    EL1C

    (26 pages)
    EL1C Installation Manual Made by Adeo Screen sp. Z o.o. (Polska) Specifications are subject to change without notice. E&OE Please verify that you are working with the latest revision of this document before specifying your screen. Doc: EL1C – Installation Manual rev4 | 27.04.2015 Download at: www.screenresearch.com 2015 AdeoSreen All Rights Reserve …
  • Celexon

    Expert Pure White

    (3 pages)
    celexon.TMwww.celexon.comcelexon.TMInstallaon guidecelexon Expert Fixed Frame screen PureWhiteThank you for purchasing a celexon product.Please read the installaon instrucons carefully before using the screen.Please keep for further refrerence. …
  • Grandview

    CB-UY92

    (4 pages)
    GRANDVIEW REPRODUCING GENUINE COLORSGrandview Crystal Screen Canada Ltd.#11- 3751 North Fraser Way,Marine Way Business Centre,Burnaby, BC, Canada V5J 5G4Tel: 1-604-412-9777 Fax: 1-604-412-9796Website: www.grandviewscreen.caGuangzhou Grandview Crystal Screen Co., Ltd.P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,Shiqiao, Panyu District, Guang …

Comments, Questions and Opinions: