Manualios.com

Panasonic KX-NS1000 Installation Manual

Panasonic KX-NS1000 Manual Online:

3.6, 1286 votes
Panasonic KX-NS1000 User Manual
Panasonic KX-NS1000 User Guide
Panasonic KX-NS1000 Online Manual

Text of Panasonic KX-NS1000 User Guide:

  • 4.2.10 Placing the PBX on a Desktop When placing the PBX on a desktop, make sure to follow these instructions. WARNING Be careful not to drop any components. Dropping components may damage them or cause an injury. CAUTION • When the PBX is placed on a desktop, make sure that the PBX is placed as indicated in the diagram below. Do not place it on its side or

  • Panasonic KX-NS1000, KX-NT321 IP Address* 1 Subnet Mask Address* 2 Default Gateway Address* 3 To set the IP address of the IP-PT To set the subnet mask address To set the default gateway address To start programming Supply power to the IP-PT. Press PROGRAM while "Searching" is displayed. Select "Network". Press SP-PHONE. Select "DHCP (Disable)". Press SP-PHONE twice. Press SP-PHONE. Select "Subnet Mask". Press SP-PHONE. Press SP-PHONE. Select "Default GW". Press SP-PHONE. Press SP-PHONE. Continued on next page Press HOLD to return to the Menu screen. To enter the IP address of the PBX Select "PBX IP Address". Press SP-PHONE.

  • Panasonic KX-NS1000, 7.7 System Prompt Languages Note • The following abbreviations are used in the language file names: – UK: United Kingdom – US: United States – LA: Latin America – CA: Canada – BR: Brazil • No. 1 is set by default. For details, see "24.1.1 UM Configuration—System Parameters—Parameters —Prompt Setting—Prompt Setting" in the PC Programming Manual. System prompt languages stored in the Storage Memory Card (installed by default) KX-NS1000 Suffix NE UK/AL XE BX AG No. 1 (Primary) UK-English UK-English US-English US-English LA-Spanish No. 2 Spanish - LA-Spanish LA-Spanish US-English No. 3 French - Mandarin - - No. 4 Ge

  • Panasonic KX-NS1000, 5. Confirm if the configuration file was successfully loaded. a. Select Maintenance ® Export Configuration File. b. Click Export to download the configuration file being used currently on the SIP phone. c. Compare the UT_ACS.cfg file and the downloaded file. If the UT_ACS.cfg file was successfully loaded, the contents of those 2 files will be exactly the same. Notice When the 2 UT_ACS.cfg files do not match, and if the SIP phone does not work properly, contact an authorised Panasonic Factory Service Centre. For Non-KX-UT Series SIP Phones Using a DHCP server (DHCP

  • How is the PBX connected to remote extensions? When the PBX is connected to a remote extensions via public IP network without using IP-VPN, address translation techniques (e.g., NAT/NAPT) are used. These methods prevent VoIP communications from being carried out effectively. In such cases, the use of a Session Border Controller (SBC) will avoid this problem. Note • An SBC is n

  • Panasonic KX-NS1000, 2. Insert the screws into the holes on the card, and tighten the screws to secure the card. Screws Removing a DSP Card Installed in the DSP Card Slot 1. Loosen and remove the screws. Screws Installation Manual 67 4.2.5 Installing/Removing the Optional Service Cards

  • Panasonic KX-NS1000, 2. Position the card in the open slot, making sure that the tabs on the both sides of the card fit into place. Then, holding the card firmly in place, lower the rear end so that the holes of the card are aligned with the screw holes. 76 Installation Manual 4.2.5 Installing/Removing the Optional Service Cards

  • Panasonic KX-NS1000, Port Number Protocol Application Client/Server Changeable/ Fixed 12000– 13535 UDP RTP/RTCP - Changeable 16000– 18047 UDP RTP/RTCP for NAT traversal - Changeable 30022 TCP SSH Server Changeable 33090 UDP ACS-MDW Server Fixed 33091 33092 TCP 33131 33702 UDP ACS-MDW (WSD) Server Fixed 40000– 40095 TCP/UDP FTP/FTPS-Data Server Changeable 50000– 65535 (Ephemeral) UDP SNMP TRAP Client Fixed TCP/UDP FTP Client TCP/UDP FTP/FTPS-Data Client UDP NTP Client UDP DNS Client UDP SYSLOG Client TCP/UDP SMTP Client TCP/UDP SMTP over SSL Client TCP/UDP POP3 Client TCP/UDP ACS-MDW Server *1 Used for KX-NS1000 conferences.

  • Panasonic KX-NS1000, Model No. Model Name Description KX-NS0290CE PRI30 / 2-Port SLT Card (SLC2/ PRI30) A combination card including: • 1 ISDN Primary Rate Interface port (30B channels). • 2 extension ports with Caller ID (FSK) for SLTs. EURO-ISDN/ETSI compliant. KX-NS0290 PRI23 / 2-Port SLT Card (SLC2/ PRI23) A combination card including: • 1 ISDN Primary Rate Interface port (23B channels). • 2 extension ports with Caller ID (FSK) for SLTs. NI (North American standard ISDN protocol) compliant. Note For the maximum number of optional service cards that can be insta

  • Panasonic KX-NS1000, 7.1.7 Network Devices You must evaluate the network devices that are used in the existing network to see if a VoIP network can be implemented. Below are the points that should be evaluated. Can the firewall pass packets appropriately? If the VoIP network contains a firewall, the firewall must be configured appropriately to allow VoIP packets to pass through the network without being blocked by filtering. For details about the protocols and port numbers that the PBX uses for VoIP communication, refer to "7.5 Port Security". The ports for which you need to configure the firewall may vary depending on the network conditions. For more information, consult

  • Panasonic KX-NS1000, 4.3 The Mother Board and Expansion Cards 4.3.1 Mother Board Function The mother board is the preinstalled processing board with activation keys for CA Basic-Express for 1022 users, use of 8 IP-PT, and 2 Unified Messaging ports. The Virtual Cards (trunk/extension) can be installed in Virtual Slots of the mother board and can be activated with the activation keys. Also, the mother board supports LAN connection so that IP telephones (IP-PTs, IP softphones, SIP phones) and PCs can be connected on a private IP network. Mountable Cards • Two of the DSP S, DSP M, or DSP L cards (refer to "4.3.3 DSP S Card (KX-NS0110), DSP M Card (KX-NS0111)

  • 4.3.4 FAX Card (KX-NS0106) Function 1-channel fax server. To be mounted on the mother board. FAX Card Screws inside Accessories and User-supplied Items Accessories (included): Screws ´ 3 User-supplied (not included): none Note When installing or removing the FAX card, do not put pressure on any parts of the mother board. Doing so may result in damage to the

  • Panasonic KX-NS1000, Pin Assignments for 1000BASE-T No. Signal Name Input (I)/ Output (O) Function 81 1 TRD0 (+) I/O Transmit and receive data 0 (+) 2 TRD0 (-) I/O Transmit and receive data 0 (-) 3 TRD1 (+) I/O Transmit and receive data 1 (+) 4 TRD2 (+) I/O Transmit and receive data 2 (+) 5 TRD2 (-) I/O Transmit and receive data 2 (-) 6 TRD1 (-) I/O Transmit and receive data 1 (-) 7 TRD3 (+) I/O Transmit and receive data 3 (+) 8 TRD3 (-) I/O Transmit and receive data 3 (-) Note You can use 1000BASE-T cables for 10BASE-T/100BASE-TX connections. BGM/MOH The PBX provides Background Music and Music on Hold. An external music source (e

  • Panasonic KX-NS1000, 6.1.4 Error Messages When a major system error occurs, an error message is displayed on the IP-PT. For IP-PTs with a single line display (e.g., KX-NT265), only an error code (i.e., ERR XXXX-XXXX) will be displayed. Error Message & IP-PT Activity Probable Cause Solution ERR 1001-0000 HARDWARE ERROR Displays error and stops operating. • Sub CPU malfunction • Repair or replace the IP-PT. ERR 1002-0000 HARDWARE ERROR Displays error and stops operating. • Sound hardware malfunction ERR 1003-0000 HARDWARE ERROR Displays error and stops operating. • Flash memory malfunction ERR 1004-XXXX HARDWARE ERROR Displays error and stops operating. • PHY (network control IC) er

  • Panasonic KX-NS1000, 3. Remove the Storage Memory Card installed in the slot on the mother board. 4. Insert the new Storage Memory Card into the slot on the mother board. 5. Place the cover as shown below. Installation Manual 81 4.2.6 Installing/Removing the Storage Memory Card

  • Panasonic KX-NS1000, 5.5 Programming a One-look Network The Add Site Wizard, which is run from the Home Screen of the Master unit, will add other KX-NS1000 PBXs connected to the private IP network to your One-look network as Slave units. Note The PBX to be added must have been configured as a Slave unit using the Easy Setup Wizard. For details about Easy Setup Wizard, see "5.4.1 Easy Setup Wizard". 1. To start the Add Site Wizard, click the Add Slave button ( ) on the Home screen. 2. Follow the prompts of the Add Site Wizard to complete following settings: • PBX Setting • Registration Setting • SNTP / Daylight Saving • Maintenance Set

  • Panasonic KX-NS1000, SLT Fax Machine SLT Fax Machine SLT Fax Machine DSP S (KX-NS0110) DSP M (KX-NS0111) DSP L (KX-NS0112) V-IPGW16 V-IPEXT32 V-SIPGW16 V-SIPEXT32 V-IPCS4 V-UTEXT32 FAX (KX-NS0106) Storage Memory (Installed by default) Storage Memory S (KX-NS0135) Storage Memory M (KX-NS0136) Storage Memory L (KX-NS0137) Doorphone & Door Opener Mountable Equipment External Sensor Telephone Company Analogue Trunk ISDN BRI Line (Digital Trunk) ISDN PRI Line (Digital Trunk) PC Router Amplifier Pager/Speaker PC IP Softphone, CA Client PC LAN CTI Server IP-PT IP-CS Private IP Network ITSP Network DCE (e.g., ADSL Modem) WAN Router

  • Panasonic KX-NS1000, Note When connecting the UPS, use only the USB cable included with the UPS and do not use USB hubs to connect the UPS and the PBX. To UPS 2. Follow the instructions in the documentation of the UPS to setup and start the UPS. System Initialisation Procedure Notice When a UPS is connected, make sure it is started as instructed in the documentation for the UPS. 1. Slide the System Mode Switch to the "SYSTEM INITIALIZE" position. STATUS Indicator System Mode Switch 2. Turn on the power switch of the PBX. The STATUS indicator will flash green. 3. While the STATUS indicator is flashing green, slide the System Mode Switch bac

  • Panasonic KX-NS1000, 5.8 Assigning Networking Information to IP Telephones 5.8.1 Assigning IP Addressing Information The IP telephone’s IP address, subnet mask address and default gateway address, and the PBX’s IP address must be assigned to the IP telephone before it can be used on the network. This IP addressing information can be assigned in the following ways: For IP-PTs • Using a DHCP server (DHCP Server feature or an external DHCP server) when the IP-PT is on the same LAN as the PBX The DHCP server automatically assigns the IP address of the IP-PT, the subnet mask address, and the default gateway address to the IP-PT. The PBX’s IP address can a

  • Panasonic KX-NS1000, 7.1 Information about Using an IP Network This section explains common IP network information necessary for setting up One-look networks and QSIG networks. 7.1.1 Using a VoIP Network with the PBX This PBX supports Panasonic KX-NT300 series and KX-NT265 IP proprietary telephones (IP-PTs), Panasonic IP softphones, and SIP (Session Initiation Protocol) phones (hardphones and softphones) for communication on a Voice over Internet Protocol (VoIP) network. These IP telephones can be used as extensions of the PBX when the local office LAN is connected to other LANs at different locations. This PBX also enables VoIP communication with

  • Master Slave (When Slave unit power is turned on before Master unit) Slave (When Slave unit power is turned on after Master unit) Operation MASTER LED Operation MASTER LED Operation MASTER LED Power On Amber (Flashing) Log in Amber Power On Amber (Flashing) Log in Green Add Site Wizard Green Add Site Wizard is Completed Green Being Registered Amber (Flashing) Registration is Completed Amber Po

  • Panasonic KX-NS1000, Note • This VLAN feature complies with IEEE (Institute of Electrical and Electronics Engineers) 802.1Q. • The PBX receives VLAN settings only from the connected switching hub. Therefore, VLAN settings for the PBX must be assigned at the switching hub. • When using the VLAN feature on the network, make sure that the main unit is connected to a layer 2 switch that is IEEE 802.1Q compliant, and that is configured for VLANs. In addition, the port of the switching hub to which the card is connected must be set to "Untagged". Consult your ne

Related Products and Documents (Server):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Hasbro ATTACKTIX 6698200000 Instructions hasbro/attacktix-6698200000-VOQ.pdf 17 Sep 2022 2 1.52 Mb
2 Wren Turbines 44i Kerostart Owner's manual wren-turbines/44i-kerostart-A7S.pdf 24 May 2023 40
3 True Fitness TD-65-24-LT Specifications true-fitness/td-65-24-lt-2-378.pdf 28 Jul 2022 2 0.13 Mb
4 Kidde i12010SCA Operation & user’s manual kidde/i12010sca-D66.pdf 30 Sep 2022 28
5 StarTech.com ST1000SPEX2 Instruction manual startech-com/st1000spex2-C2Q.pdf 31 Jan 2024 10 1.01 Mb
6 Suzuki SV650 Owner's manual suzuki/sv650-5GO.pdf 20 Sep 2022 26

Similar Resources:

  • HP

    Laserjet,Color Laserjet 4550

    (68 pages)
    6.5" x 9" FRONT COVER6.5" x 9" BACK COVERcopyright © 2000Hewlett-Packard Companyprinted in Germanywww.hp.com/support/lj4550englishgetting started guidehp color LaserJet 45504550n • 4550dn • 4550hdnC7085-90901*C7085-90901**C7085-90901*goprinted onrecycled paper …
  • KYLAND Technology

    SICOM3171 Series

    (11 pages)
    SICOM3171 Series Managed Traffic Ethernet Serial Server Quick Installation Manual KYLAND Technology Co., Ltd. First Edition-Sep. 2010 www.kyland.cn Industrializing the Ethernet Simplifying Industrial Communication P/N: 1.12.02.0036-0 …
  • HP

    ProLiant DL320e

    (3 pages)
    HP Scripting Toolkit v9.30SystemsHP Scripting Toolkit for LinuxHP Scripting Toolkit for WindowsHP ProLiant BL Server BladesHP ProLiant BL260c G5 ServerP PHP ProLiant BL280c G6 Server P PHP ProLiant BL2x220c G5 Server P PHP ProLiant BL2x220c G6 Server P PHP ProLiant BL2x220c G7 Server P PHP ProLiant BL420c Gen8 Server P PHP ProLiant BL460c G5 Server P PHP Pro …
  • Conceptronic

    Grab’n’GO CH3WNAS

    (208 pages)
    NEDERLANDS 1 Conceptronic CH3WNAS Snelstart handleiding Hartelijk gefeliciteerd met de aanschaf van uw Conceptronic Grab’n’GO Wireless Media Store. In de bijgaande Snelstart handleiding wordt stap voor stap uitgelegd hoe u de Conceptronic Grab’n’GO Wireless Media Store kunt instellen en gebruiken. In geval van problemen adviseren wij u onze suppo …
  • Moxa Technologies

    NPort 5610-8-DT

    (2 pages)
    — 1 — — 2 — — 3 — NPort 5600-8-DT Series Quick Installation Guide Second Edition, December 2008 1. Overview The following models comprise the NPort 5600-8-DT Series: NPort 5610-8-DT: 8 ports, RS-232, DB9 NPort 5610-8-DT-J: 8 ports, RS-232, RJ45 NPort 5650-8-DT: 8 ports, RS-232/422/485, DB9 NPort 5650-8-DT-J: 8 ports, RS-232/422/485, RJ …
  • Sony

    WG-C10 Series

    (2 pages)
    WG-C10 Series4-454-827-11(1)Portable Wireless ServerImportant information© 2013 Sony Corporation Printed in China WARNINGTo reduce fire or shock hazard, do not expose the unit to rain or moisture.Do not expose the batteries to excessive heat such as sunshine, fire or the like.For the Customers in U.S.A.UL is an internationally recognized safety organizat …

Comments, Questions and Opinions: