Manualios.com

Automationdirect.com FPM-180 Operation & User’s Manual

Automationdirect.com FPM-180 Manual Online:

4.9, 559 votes
Automationdirect.com FPM-180 User Manual
Automationdirect.com FPM-180 User Guide
Automationdirect.com FPM-180 Online Manual

Text of Automationdirect.com FPM-180 User Guide:

  • Automationdirect.com FPM-180, 6 Section No Picture Check that the signal cable is properly connected to the display. Try disconnecting the video cable from the display and connecting to another display if available to confirm the presence of proper video. Make sure power is connected to the proper AC source. Make sure the resolution mode is supported by the display and check display settings of the PC Confirm that the video cable is not defective. Image Persistence Image persistence oc

  • Automationdirect.com FPM-180, Touch Screen Driver Installation for Windows 2000 Required items to know or have to install the Touch Driver.  What Operating System you are using. Windows 2000  What Serial Port you are connected to. Usually COM 1 or COM 2  The type of touch screen. Smartset  The CD-ROM or Floppy disk included with the system. Touch Screen Driver Installation for Windows 2000  Insert the provided CD  Select Link to Windows 2000 driver  Select Open from the Windows dialog box.  Select Next  Select Yes - To the license agreement  Select the Com Port to which the to

  • Automationdirect.com FPM-180, Appendix C – DVI Video Pin Assignments Pin 1 TMDS Data 2- Pin 2 TMDS Data 2+ Pin 3 TMDS Data 2/4 Shield Pin 4 TMDS Data 4- (NC) Pin 5 TMDS Data 4+ (NC) Pin 6 DDC Clock Pin 7 DDC Data Pin 8 NC Pin 9 NC No Connection Pin 10 TMDS Data 1- Pin 11 TMDS Data 1/3 Shield Pin 12 TMDS Data 3- (NC) Pin 13 TMDS Data 3+ (NC) Pin 14 5 V Pin 15 Ground Pin 16 Hot Plug Detect Pin 17 TMDS Data 0- Pin 18 TMDS Data 0+ Pin 19 TMDS Data 0/5 Shield Pin 20 TM

  • Appendix F –General Specifications FPM-180 & FPM-180-TS Bold - Indicates Up Dated Specification Active Screen Area 14.4" x 11.31" Brightness 300 Contrast 350:1 Lamp Life 40K Max Screen Resolution VGA-SXGA Vertical Frequency Range 50-85 Hz. Horizontal Frequency Range 15-80 KHz. PC Video Input Separate Sync (5 Wire) Composite

  • Automationdirect.com FPM-180, Touch Screen Driver Installation for Windows 98 Required items to know or have to install the Touch Driver.  What Operating System you are using. Windows 98  What Serial Port you are connected to. Usually COM 1 or COM 2  The type of touch screen. Smartset  The CD-ROM or Floppy disk included with the system. Touch Screen Driver Installation for Windows 98  Insert the provided CD  Select Link to the Windows 98 driver  Select Open from the Windows dialog box.  Select SmartSet Controller for Com1 or Com2 

  • Automationdirect.com FPM-180, 7 Section Cleaning CAUTION: SHUT OFF YOUR TOUCH SCREEN BEFORE CLEANING!! IF YOUR DISPLAY IS A –TS MODEL, THAT IS A TOUCH SCREEN DISPLAY, THE SCREEN WILL BE ACTUATED BY CLEANING. PRESSING ON THE SCREEN WHILE CLEANING WILL BE SEEN AS A TOUCH TO THE SYSTEM WHICH COULD CREATE A POTENTIALLY DANGEROUS CONDITION!! Occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to avoid scratching it with accumulated grit. Note: The solvent should be applied

  • 2 Section Included Parts Your LCD monitor package will consist of the primary components listed below. Open shipping container and lay all components on a flat clean surface.  FPM-180(-TS) LCD Monitor  6 ft Video Cable  6 Ft AC Power Cable  6 ft RS232 Touch Interface Cable ( touch screen units only)  10-32 Mounting Hardware. (Fo

  • Automationdirect.com FPM-180, 8 Section Appendix A – Video Pin Assignments Pin assignments for the HD15 video connector Pin 1 Red Video Pin 9 No Connection Pin 2 Green Video Pin 10 Sync Ground Pin 3 Blue Video Pin 11 Not Used Pin 4 Not Used Pin 12 Bi-Directional Data Pin 5 Return Pin 13 Horizontal Sync Pin 6 Red Video Ground Pin 14 Vertical Sync Pin 7 Green Video Ground Pin 15 Data Clock (SCL) Pin 8 Blue Video Ground Appendix B – RS-232 Pin Assignments Pin assignment for 9 Pin Optional Touch Screen Connector Pin 1 DCD Data Carrier Detect Pin 2 RD (Rx) Receive Data Pin 3 SD (Tx) Transmit Data P

  • Automationdirect.com FPM-180, Touch Screen Driver Installation for Windows NT 4.0 Required items to know or have to install the Touch Driver.  What Operating System you are using. Windows NT 4.0  What Serial Port you are connected to. Usually COM 1 or COM 2  The type of touch screen. Smartset  The CD-ROM or Floppy disk included with the system. Touch Screen Driver Installation for Windows NT 4.0  Insert the provided CD  Select Link to the Windows NT driver  Select Open from the Windows dialog box.  Select Next  Select Yes - To the license agreement  Select Next - To the default installation folder  Sel

  • Automationdirect.com FPM-180, 4 Section Introduction to Touch Screens Touch screen interfaces have become the standard interface in the past 5 years. They are, rugged, reliable, extremely flexible and easier than ever to implement! The universal acceptance of the Windows GUI [Graphical User Interface] along with the extensive use of a mouse interface has significantly accelerated the use of a touch interface. Basically think of your touch screen as if it were a mouse. AutomationDirect.com touch systems are mouse emulators. By installing a software driver and connecting to a serial port,

  • 3 Section Display Features  The FPM-180(-TS) is capable of displaying 16M (24 Bit) colors in a continuous spectrum. The high contrast LCD enhances the image with no geometric distortion.  FPM-180(-TS) Series directly accepts an analog 5 wire RGB with separate H/V (Horizontal / Vertical) sync. This is the standard PC video signal.The FPM-180(-TS) Series is auto synchronous, ad

  • Automationdirect.com FPM-180, FPM-180 & FPM-180-TS Table Of Contents Section 1 Introduction About LCD Monitors Product Safety Precautions Section 2 Display Setup Included Parts Connecting Your Display Section 3 Getting Started Display Features Getting Started Adjusting the Display Using the Auto-Adjust OSD (On Screen Display) Adjustments Section 4 Touch Screen Set up Introduction to Touch Screens Touch Screen Driver Installation Windows 98 Windows NT 4.0 Windows 2000 Windows XP Section 5 Mounting Instructions Section 6 Trouble Shooting Tips Section 7 Cleaning and Maintenance Section 8 Appe

  • Automationdirect.com FPM-180, Safety Precautions CAUTION: SHUT OFF YOUR TOUCH SCREEN BEFORE CLEANING!! IF YOUR DISPLAY IS A –TS MODEL, THAT IS A TOUCH SCREEN DISPLAY, THE SCREEN WILL BE ACTUATED BY CLEANING. PRESSING ON THE SCREEN WHILE CLEANING WILL BE SEEN AS A TOUCH TO THE SYSTEM WHICH COULD CREATE A POTENTIALLY DANGEROUS CONDITION!!  Do not attempt to service this display yourself. The rear chassis has a seal so that non qualified personal will not expose themselves to dangerous voltages or other risks.  To protect from electri

  • Automationdirect.com FPM-180, PICTURE Press MENU key to bring up the OSD. Press UP/DOWN key to move between the 5 primary screen functions. Press the Select button at Picture, to select it. Press the UP/DOWN key, you can now move between functions and press Select to adjust the value of each item with the key. Press MENU key to return previous state and press MENU key twice to exit OSD.  BRIGHTNESS Function of adjusting main screen brightness.  CONTRAST Function of adjusting main screen contrast.  FREQUENCY Function of adjusting main screen sampling clock frequency.  PHASE Function of adjusting main screen sampling clock phase.  H POSITION F

  • Automationdirect.com FPM-180, Using the Auto-Adjust The FPM-180(-TS) will attempt to adjust itself to your computers current video model. If the picture is stable, and centered vertically and horizontally the auto-adjustment is complete. If however the picture is not stable, and centered vertically and horizontally you can re-initate the auto adjustment. Once you have the unit displaying the resolution you desire for your application, do the following: Press HOLD and release the “Select” button on the membrane. This will place the unit into a “Geometry Auto Adjust” mode. This operation will adjust the picture so it is centered both vertically and horizon

  • Automationdirect.com FPM-180, Touch Screen Driver Installation for Windows XP Required items to know or have to install the Touch Driver.  What Operating System you are using. Windows XP  What Serial Port you are connected to. Usually COM 1 or COM 2  The type of touch screen. Smartset  The CD-ROM or Floppy disk included with the system. Touch Screen Driver Installation for Windows XP  Insert the provided CD  Select Link to XP driver  Select Open from the Windows dialog box.  Select Yes

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Chauvet Hurricane 1800 Flex Operation & user’s manual chauvet/hurricane-1800-flex-N3L.pdf 12 Jul 2022 19
2 Electrolux SMART 726679 Specification sheet electrolux/smart-726679-VBI.pdf 13 Apr 2023 2
3 Roland SP-540i Setup manual roland/sp-540i-MFD.pdf 08 Mar 2024 48
4 Philips 52PFL7932D/78M Specifications philips/52pfl7932d-78m-GY8.pdf 28 Jul 2022 3
5 Juniper WLA620 Installation manual juniper/wla620-75S.pdf 27 Nov 2023 96
6 Panasonic FP0 Series Specifications panasonic/fp0-series-U8W.pdf 17 Oct 2022 27 1.08 Mb

Similar Resources:

  • BenQ

    GW2870

    (4 pages)
    1 Adjusting the screen resolutionAdjusting the screen resolutionDue to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. For the best display performance, please set the display to its maximum resolution that is the same with the monitor aspect ratio. This is called “Native Resolution” or maximal resolution …
  • Acer

    B273HL

    (24 pages)
    TABLE OF CONTENTSSpecial notes on LCD monitors..................................................1Information for your safety and comfort..................................2Unpacking...................................................................................5Attaching/Removing the base....................................................6Screen position …
  • ViewSonic

    VA926g

    (25 pages)
    ViewSonic®VA926gLCD DisplayModel No. : VS13642IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also f …
  • Elvox

    GALILEO 732M

    (8 pages)
    Art. 732MMANUALE PER IL COLLEGAMENTO WIRING INSTRUCTIONSINSTRUCTIONS POUR LA CONNEXIONANWEISUNGEN FÜR DEN ANSCHLUSSINSTRUCCIONES PARA EL CONEXIONADOINSTRUÇÕES PARA A LIGAÇÃOMONITOR SERIE GALILEOGALILEO SERIES MONITORMONITEUR SERIE GALILEOMONITOR BAUREIHE GALILEOMONITOR SERIE GALILEOMONITOR DA SÉRIE GALILEOCod. S6I.732.M01 RL. 00 5/2007Il prodotto è co …
  • Philips

    221P3LPES

    (3 pages)
    Philips BrillianceLED monitor with PowerSensorP-line21.5" (54.6 cm)221P3LPESInnovative PowerSensor display saves energy billsEco-friendly, EPEAT Gold certified Philips Professional 221P3 LED display with intelligent PowerSensor detects user presence and adjusts power consumption saving up to 80% of energy bills!Sustainable Eco-friendly solution• Powe …
  • LG

    M198WDP

    (96 pages)
    Please read this manual carefully before operatingyour set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you requireservice.OWNER’S MANUALMM119988WWDDPPMM222288WWDDPPTrade Mark of the DVB Digital Video Broadcasting Project (1991 to 1 …

Comments, Questions and Opinions: