Manualios.com

Avaya X330W-2DS1 Quick Start Manual

Avaya X330W-2DS1 Manual Online:

4.8, 1526 votes
Avaya X330W-2DS1 User Manual
Avaya X330W-2DS1 User Guide
Avaya X330W-2DS1 Online Manual

Text of Avaya X330W-2DS1 User Guide:

  • Avaya X330W-2DS1, Avaya X330W-2DS1 Access Router Module Quick Start Guide NNoottee : The X330WAN expansion modules can be installed in the following Avaya P330 switches: • P333T, P334T, P332MF, P333R, P333R-LB, P333T-PWR – Embedded S/W version 3.9 or higher You can see the Embedded Software versions of the switch using the dir [mod_num] CLI command. If you need to upgrade the software, obtain the latest version of the software from http://www.avaya.com/support/ and download it according to the instructions in the User’s Guide. Important Safety Information Unpack the Module Connect the Ports Configure the Module Run the Web-based Manager (optional) Insert the Module 1 2 3 4 5 6

  • Important Safety Information Before installing or removing any components of a device, or carrying out any maintenance work, you must read the safety information provided. CAUTION: To avoid damage from static, only hold the WAN Expansion Router Module by the edges. Do not touch the top or bottom of the circuit board. If possible, wear a wrist-strap and use an anti-static bag. CAUTION: The Av

  • Avaya X330W-2DS1, Unpack the Module Check the package contents for the following: Equipment • One X330WAN Access Router Module. L Connection cables are not supplied. Documentation • Avaya X330WAN Access Router Modules Quick Start Guide (this document). • Avaya X330WAN Access Router Modules Release Notes. • Avaya X330WAN Access Router Modules Documentation and Utilities CD. • Avaya Warranty and License Agreement. CD Contents • Avaya X330WAN Access Router Modules User’s Guide. L If any items are missing or damaged, contact your supplier. 2

  • Avaya X330W-2DS1, Insert the Module To insert an X330WAN into an Avaya P330 switch: 1. Remove the blanking plate or other expansion module (if installed). 2. Insert the WAN expansion module gently into the slot, ensuring that the Printed Circuit Board (PCB) is aligned with the guide rails. L The PCB fits into the guide rails and not the metal base plate. 3. Press in the expansion module firmly until it is completely inserted into the Avaya P330 switch. 4. Gently tighten the two screws on the front panel of the expansion module by turning them. 5. Power up the Avaya P330 switch. X The self-test procedure starts. It

  • Avaya X330W-2DS1, 4 Connect the Ports Connecting the E1/T1 Ports To connect a T1/E1 module to a network, use a straight-through RJ-48C-to-RJ-48C cable to connect the E1/T1 port to an RJ-48C wall jack. Connecting the Ethernet Port A UTP Category 5 cable must be connected to the 100Base-TX port, via an RJ45 connector. The maximum UTP cable length connected to the 10/100 Mbps port operating as 10/100Base-T is 100 m (328 ft.). LYou can obtain appropriate cables from your local supplier. LIf you are connecting the Fast Ethernet port to a PC or workstation, you should use a crossed cable. LIf you are

  • Avaya X330W-2DS1, 5 Configure the Module L Before you can set up the X330WAN module you must power on and set up the Avaya P330 stack as described in the Avaya P330 User’s Guide. L Before using the X330WAN module you must assign an IP address via the Command Line Interface (CLI) or via a Telnet session to the switch where the X330 is inserted. The following steps describe how to configure the X330WAN module using the Avaya CLI. Establishing a Serial Connection Perform the following steps to connect a terminal to the Console port of the X330WAN for configuration of WAN parameters using the CLI: 1. Use the supplied serial cable to attach the RJ-45 cons

  • Avaya X330W-2DS1, LThe console interface configured with the interface Console command must be on a different subnet from the router interfaces. 6. Use the following commands to set the baud rate, ppp authentication, ppp chap-secret and ppp timeout required to match your remote station if they differ from the default values: LThe default values are shown in bold italic text. speed <9600 | 19200 | 38400 > ppp authentication <chap | none | pap> ppp chap-secret <string> timeout absolute <time> LThe time is i

  • Avaya X330W-2DS1, Configuring Loopback Interfaces LAll CLI commands mentioned in this section are described in the Avaya P330 Reference Guide. To configure Loopback interfaces: 1. Use the interface loopback <loopback number> command to enter the Interface Loopback mode. For example, typing interface loopback 1 configures a loopback with a Loopback interface number 1. The prompt changes to p330WAN-N(super-if:Loopbackn)# where N is the switch number and n is the loopback interface number. 2. Use the ip address <ip_addr><net-mask> command to assign an IP address and subnet mask to the interface. 3

  • Avaya X330W-2DS1, Configuring E1/T1 Interfaces LAll CLI commands mentioned in this section are described in the Avaya P330 Reference Guide. To configure E1/T1 interfaces: 1. Use the show controllers command to check if your controller’s mode is configured as E1 or T1. Use the ds1-mode <e1 | t1> command to change the controller’s mode from E1 to T1 or vice versa. 2. Use the controller <e1 | t1> <port-number> command to set the port number to be configured. The prompt changes to p330WAN-N(super-controller:n)# where N is the switch number and n is the port number. 3. Use the following commands if you want to chang

  • Avaya X330W-2DS1, Changing the Primary Management Interface (pmi). L The default pmi is the first interface you define. To change the pmi: 1. Enter one of the interface contexts as explained before. 2. If there no ip assigned on that interface use the | ip address <ip_ addr>< net- mask> command. 3. Use the ip routing-mode rt_primary_mgmt command to set the interface as pmi. X The following message displays: 4. Enter the following commands: copy running-config startup-config reset Establishing a Telnet Connection Perform the following steps to establish a Telnet connection to the X330WAN for configuration of WAN parameters. Telnet directly to

  • X330WAN Default Settings The default settings for the X330WAN and its ports are determined by its embedded software. These default settings are subject to change. Newer versions of the software for the X330WAN can be downloaded from the Avaya Network Software Download Web site (http://www.avayanetwork.com). If you wish to change the default parameters, we recom- mend that you use

  • Avaya X330W-2DS1, Run the Web-Based Manager (optional) L To configure the Avaya X330WAN you can use the P330 Web-based Manager in addition to using the CLI. System Requirements Minimum hardware and Operating System requirements are: • Pentium® II 400 Mhz-based computer with 128 Mb of RAM • Screen resolution of 1024 x 768 pixels • Microsoft® Internet Explorer® 5 or Netscape Navigator® 4.x • Windows® 95, NT® 4.0 (server/workstation) or Windows 2000 (server/workstation) • Sun Microsystems Java™ plug-in ver

  • Avaya X330W-2DS1, L If the network manager has configured the system the plug-in should be installed auto- matically. If the plug-in is not installed automatically, there are three ways to install the plug-in manually: • Either install the plug-in from the CD as follows: 1. Close all unnecessary applications on your PC. 2. Insert the “Avaya P330 Documentation and Utilities” CD in the CD drive. 3. Click Start on the Task bar. 4. Select Run. 5. Type x:\emweb-aux-files\plugin_1_3_1.exe (where x: is the CD drive letter) 6. Follow the on-screen instruct

  • Contact Information To contact Avaya technical support: From the United States: Please call 1-800-237-0016, press 0, then press 73300. From outside the United States: EMEA (Europe, Middle East and Africa). Email: [email protected] AP (Asia Pacific). Email: [email protected] CALA (Caribbean and Latin America). Email: [email protected] Hot Line: +1 720 4449 998 Fax: +1 720 444 9103

More Instructions:

DOWNLOAD

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 HP 510 - Notebook PC Maintenance and service manual hp/510-notebook-pc-8U8.pdf 02 Nov 2023 123
2 Parrot USB 1.1 Manual  parrot/usb-1-1-657.pdf 05 Aug 2023 52 1.63 Mb
3 LG Optimus One Get started lg/optimus-one-565.pdf 19 Jun 2022 40
4 Jet Hybrid Style Specification sheet jet/hybrid-style-4M6.pdf 25 Feb 2023 1
5 Dell D620 - Latitude Laptop Computer System Core Duo Processor Wireless XP Pro Specification sheet dell/d620-latitude-laptop-computer-system-core-duo-processor-wireless-xp-pro-594.pdf 24 Dec 2023 4 0.04 Mb
6 Roland MD-8 Manual  roland/md-8-A1T.pdf 22 Sep 2023 8 0.31 Mb

Similar Resources:

  • D-Link

    DKT-110

    (2 pages)
    TOTAL COMPATIBILITY Works with any Wi-Fi certified device, giving you peace of mind and performanceTOTAL SIMPLICITYWith USB you can use the adapter on both laptop or desktop PCs. With Click’n Connect , you can just use the CD and get online fastTOTAL SECURITYComplete set of security features including Active Firewall and WPA2 to protect your network again …
  • Asus

    RT-N66R

    (70 pages)
    RT-N66R Dark Knight Gigabit Router Dual Band Wireless-N900The ultra-thin and stylish RT-N66R features a 2.4GHz and 5GHz dual bands for an unmatched concurrent wireless HD streaming; SMB server, UPnP AV server, and FTP server for 24/7 file sharing; a capability to handle 300,000 sessions; and the ASUS Green Network Technology, which provides up to 70% power …
  • ANTAIRA

    LMX-0500 Series

    (78 pages)
    Antaira Industrial Ethernet Switches LMP-0500 Series User Manual V1.1 i LMX-0500 Series 5-Port Industrial Managed Ethernet Switch, with 5*10/100Tx, 12~48VDC Power Input User Manual Version 1.1 …
  • D-Link

    DWR-710

    (3 pages)
    Technical Support Setup Procedure Page 1 of 3 How to setup and connect wireless to DWR-710? Note: By default, the network name(SSID) of the DWR-710 will be in the format dlink_DWR_710_xxxx where “xxxx” represents the last 4 characters of the DWR-710’s MAC Address. Plea …
  • 3Com

    3C13755-US - Router 5642

    (104 pages)
    http://www.3com.com/Router 5000 FamilyInstallation GuideRouter 5012 (3C13701)Router 5232 (3C13751)Router 5642 (3C13755)Router 5682 (3C13759)Part No. 10014373Published October 2004 …
  • Cisco

    Nexus 7000 Series

    (287 pages)
    Corporate Headquarters170 W. Tasman DriveSan Jose, CA 95134-1706USA408 526-4000800 553-NETSCisco 7010 Hardware Installation and MaintenanceCustomer Order Number: DOC-7010IM2Text Part Number: 78-1222-05 …

Comments, Questions and Opinions: