Crestron ST-1700C Operation Manual
|
Crestron ST-1700C, Crestron Electronics, Inc. Operations Guide – DOC. 6225A 15 Volvo Drive Rockleigh, NJ 07647 12.04 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and, as applicable, associated media, printed materials, and “online” or electronic documentation (the “Software”). BY INSTALLING, COPYING, OR OTHERWISE USING THE SOFTWARE, YOU REPRESENT THAT YOU ARE AN AUTHORIZED DEALER OF CRESTRON PRODUCTS
Crestron ST-1700C, 1-Way Wireless RF Touchpanel Crestron ST-1700C Select Interface SELECT INTERFACE CRESNET INTERFACE MENU SELECT RF ID The touchpanel communicates with a control system to activate commands or to display feedback from components within the system. The communication interface must be correctly specified or communication will not occur. To set communication parameters, first select the Interface button on the SETUP MENU to display the SELECT INTERFACE screen, shown to the left. Then, select either the CRESNET or the RF button to display the CRESNET INTERFACE MENU or the SELECT RF ID scre
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel Uploading a VT Pro-e Project A compiled VT Pro-e file has the extension .vtz. VT Pro-e is a Windows compatible software package for creating Crestron touchpanel screen designs. Refer to “Programming with VT Pro-e” on page 15 for additional details. To upload a VT Pro-e project to the ST-1700C, complete the following steps. 1. Make sure that “Communication Settings” that begins on page 23 has been performed. 2. As shown below, select File Transfer | Send Touchpanel (alternatively, depress Alt+T) from the Viewport menu. Select Send Touchpanel 3. As shown below, select the Net ID of the ST-1700C and t
Crestron ST-1700C, 1-Way Wireless RF Touchpanel Crestron ST-1700C If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent. Without prejudice to any other rights, Crestron may terminate this Agreement immediately upon notice if you fail to comply with the terms and conditions of this Agreement. In such event, you must destr
1-Way Wireless RF Touchpanel Crestron ST-1700C feedback and to the control system program to properly process the signals, and to make sure that the state of the buttons on the panel and in the control system remain in sync. Button press feedback produces a change in appearance from the inactive state to the active state, or vice versa, as defined in the progr
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel Calibration Menu CALIBRATION MENU Calibration of the touchscreen is required if the active touch area of a button does not coincide with the button's image. Select the Touch Screen Calibration b utton to display the CALIBRATION MENU, shown to the left. The CALIBRATION MENU offers the choice to initiate calibration with the Perform Calibration button or return to the previous screen with the Return button. Choose an option by touching the correct button. If you proceed to calibra
Crestron ST-1700C, 1-Way Wireless RF Touchpanel Crestron ST-1700C NOTE: The ST-1700C is supplied with an optional bezel, two 5-button switch actuators, and ten black pushbuttons (blank), five for each side of the LCD screen. You can use these buttons to access any frequently used commands. Refer to “Appendix: Installation of Optional Pushbuttons” for instructions to install the optional switches, buttons, and bezel. NOTE: Two options, 1700C-BTNB (black buttons) or 1700C-BTNS (silver buttons), can be purchased to provide custom engraved buttons for your touchpanel. Contact Crestron cust
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel Interlock An interlock consists of a number of assigned buttons grouped together so that button selection is mutually exclusive within the group. This is an important feature when you wish to guarantee that button selection can only be made when all the other buttons of the group are or will be forced inactive. For example, three sources (CD, VCR, tape deck) are controlled and designed within an interlock. This ensures that if CD is chosen, all other sources are inactive. To create the interlock group, right-click on one of the buttons to be in the group, and se
Crestron ST-1700C, 1-Way Wireless RF Touchpanel Crestron ST-1700C Accessing the “Port Settings” Window 7. Select the RS-232 connection type. Verify the available COM is selected. Verify that the baud rate is set to 115200 (PRO2 default), the parity is None, the data bits is Eight, the stop bits is One, XON/XOFF is not selected, and RTS/CTS is selected. Click the OK button to save the settings and close the window. NOTE: If problems occur when transferring any Cresnet file (touchpanel project/firmware), l
Crestron ST-1700C, 1-Way Wireless RF Touchpanel Crestron ST-1700C Physical Views (continued) 3.56 in (9.04 cm) 8.75 in (22.22 cm) 5.70 in (14.48 cm) Top view Front view Side views 3.85 in (9.78 cm) 5.51 in (14.00 cm) 4.24 in (10.76 cm) 5.01 in (12.73 cm) upload connector Cresnet Power connector The battery compartment, located on the underside of the unit, holds one Crestron ST-BTPN, rechargeable power pack. There are also four rubber feet on the underside of the unit for stability and to prevent slippage. WARNING: To avoid shock hazard and possible damage to the u
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel ST-1700C Touchpanel Troubleshooting (continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Touchpanel does not function and RF LED on PRO2 illuminates, but COM or IR LEDs Touchpanel RF ID is not set to match the RF ID assigned in the system program. Verify that RF IDs match. Refer to "Interface" in this Operations Guide and RF ID parameters assigned in the program. do not illuminate. Program is not loaded or program is stopped. Press F7 in Viewport to verify program is loaded/running. Press F10 to restart program if necessary. Touchpanel display is dark or too light. Screen brightness is imprope
Crestron ST-1700C, 1-Way Wireless RF Touchpanel Crestron ST-1700C respective Operations Guide for the control system. These documents are available from the Downloads | Product Manuals section of the Crestron website (www.crestron.com). Refer to the following figure for a typical connection diagram when uploading files. NOTE: Use a standard DB9 male to female “straight-through” cable. Typical Connection Diagram when Uploading a Project from the PRO2 or equivalent NOTE: If the control system in use has a 4-pin network connector rather than a m
Crestron ST-1700C, 1-Way Wireless RF Touchpanel Crestron ST-1700C “Create Interlock” Window For new interlock groups, move the cursor over each button to be added and left- click to select it. (Notice that the cursor assumes the pointing hand shape when it is over the page.) If a button is inadvertently placed in the “Buttons:” field, highlight the button and select Delete to remove it from the group. Select OK to confirm and save the interlock group. To edit an existing interlock group, select the group in the “Edit Interlock” win
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel sequence, but the only information that is actually transmitted to the control system is the join number of the button that specifies the sequence. On the touchpanel, if timing is specified in the sequence, the button that specifies the sequence will appear active for the whole sequence; the other buttons in the sequence will go active in the order and for the duration specified in the sequence; if no timing is specified, the other buttons will go active simultaneously. The programmer must duplicate the actual logic, including all button presses, functions and durations, on the control system. Normally, th
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel Contents 1-Way Wireless RF Touchpanel: ST-1700C 1 Introduction ...............................................................................................................................1 Functions and Features................................................................................................ 1 Specifications ..............................................................................................................2 Physical Description....................................................................................................3 Industry Compliance ..........................................................
Crestron ST-1700C, 1-Way Wireless RF Touchpanel Crestron ST-1700C Appendix: Installation of Optional Pushbuttons The ST-1700C is supplied with ten optional pushbutton switches, blank buttons, and a bezel to accommodate the switches. As a further option, custom engraved black buttons (1700C-BTNB) or silver buttons (1700C-BTNS) can be designed and purchased via the Crestron Engraver software. Version 2.3.0.0 or later is available from the Downloads | Software Updates section of the Crestron website (www.crestron.com). Perform the following to install pushbuttons on the ST-1700C. Follow these same basic procedures to replace the
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel “Select Network ID” Window 4. As shown below, select the firmware (CSF) file and click Open. The transfer will complete automatically. Select CSF File 5. Disconnect the programming cable and the external power pack from the touchpanel. Operations Guide – DOC. 6225A 1-Way Wireless RF Touchpanel: ST-1700C • 29
Crestron ST-1700C 1-Way Wireless RF Touchpanel Industry Compliance As of the date of manufacture, this unit has been tested and found to comply with specifications for CE marking and standards per EMC and Radio Communications Compliance Labeling. NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the following two co
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel ST-1700C 1-Way Wireless RF Touchpanel Specifications (continued) SPECIFICATION DETAILS Humidity 10% to 90% RH (non-condensing) Overall Dimensions Width: 8.75 in (22.23 cm) Height: 3.85 in (9.78 cm) Depth: 5.51 in (14.00 cm) Weight (without battery pack) 1.85 lb (0.84 kg) 1. Battery life is 180 minutes continuous usage with background lighting at full brightness. Actual operating time depends on usage and settings for background brightness and timeouts. 2. The latest ve
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorizati
1-Way Wireless RF Touchpanel Crestron ST-1700C Select VTZ File 6. Disconnect the programming cable and the external power pack from the touchpanel. 7. Close the Viewport, exit VT Pro-e, and disconnect the programming cable from the PC and the control system. Firmware Upgrade A firmware upgrade file has the extension .csf. Firmware upgrade files can be downloaded from
1-Way Wireless RF Touchpanel Crestron ST-1700C Digital Reserved Join Numbers for ST-1700C Touchpanel JOIN NUMBER FUNCTION VALUE 17200 Power Off 17216 Brightness Up 17217 Brightness Down 17218 Brightness High 17219 Brightness Medium (Default) 17220 Brightness Low 17230 Standby N/A 17231 Standby Timeout Up 17232 Standby Timeout Down 17233 Power Timeout Up 17
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel Indirect text on a button is entered in VT Pro-e and the actual string to be displayed is entered in SIMPL Windows. You must use VT Pro-e 3.0 or later to guarantee that the full set of characters in the font is stored on the touchpanel. You must use SIMPL Windows 2.03.11 or later to enter Chinese characters directly. As of this publication date, only completely single-byte or completely multibyte strings may be entered or they will not be compiled correctly in S
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel SCREEN SETTINGS - BRIGHTNESS Brightness From the SETUP MENU, press the Brightness button to open the SCREEN SETTINGS – BRIGHTNESS screen. The UP and DOWN buttons increase and decrease screen brightness, respectively. The display to the right of the buttons shows the relative brightness from 0% to 100%. Select the Return button to return to the SETUP MENU. STARTUP PREFERENCE Startup Preference The Startup Preference feature allows (when the
Crestron ST-1700C 1-Way Wireless RF Touchpanel Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website (www.crestron.com). To post your own question or view questions you have submitted to Crestron’s True Blue Support, log in at http://www.crestro
Crestron ST-1700C, Crestron ST-1700C 1-Way Wireless RF Touchpanel Programming Cable Specifications 1. Before making any connections to the touchpanel, verify that control system is properly connected to the PC (using ST-PK cable 15717 and adapter) and powered on. 2. Attach the stereo connector end of the ST-PK cable 15710, to the touchpanel. 3. Attach the RJ-11 connector end of the ST-PK cable 15710, to the connector labeled NET on the control system. 4. Attach the appropriate external power pack or equivalent to touchpanel and plug into outlet. At the PC, make sure that no programs accessing the COM port of the PC are running. 5. Open the Crestron Viewpor
DOWNLOAD |
Crestron TPS-TPI Wireless Router Operation manual
TPS-TPI |
Crestron 3200 Wireless Router Operation manual
3200 |
Crestron TPMC-8T Wireless Router Operation manual
TPMC-8T |
Crestron DTT-15V2 Wireless Router Operation manual
DTT-15V2 |
Crestron APAD Wireless Router Dimension manual
APAD |
Crestron CNIRHT-15 Wireless Router Operation manual
CNIRHT-15 |
Crestron CNRFHT-15A Wireless Router Operation manual
CNRFHT-15A |
Crestron ST-1700C Wireless Router Operation manual
ST-1700C |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Medisana | Air 60300 | Operating instructions manual | medisana/air-60300-886.pdf | 30 Jan 2024 | 22 | |
2 | Nautilus Hyosung | MONiMAX5600 | Service manual | nautilus-hyosung/monimax5600-69O.pdf | 07 Nov 2023 | 154 | |
3 | Brookstone | 975362 | Operating instructions manual | brookstone/975362-318.pdf | 23 Oct 2023 | 28 | |
4 | Lumel | RE92 | Operation & user’s manual | lumel/re92-35I.pdf | 30 Nov 2022 | 180 | |
5 | Zanussi | PLB2400 | Instructions for the use and care | zanussi/plb2400-21U.pdf | 26 Apr 2023 | 8 | 0.24 Mb |
6 | HP | MP100 | Operation & user’s manual | hp/mp100-635.pdf | 15 Feb 2023 | 28 |
CNET
PPPoE SetupQuick Installation Guidewww.cnet.com.twEstablished in California, U.S.A. since 1987CAR-970Wireless-N 4 Port ADSL2/2+ Modem RouterWhat’s included in the box□ Quick Installation Guide□ CAR-970 Modem Router□ Power Adapter□ Ethernet Cable□ Product CD
…
CAR-970(6 pages) |
Asus
User ManualWireless Local Area Network AdapterWL-130N(For 802.11n draft, 802.11g & 802.11b Networks)®E3123/ April 2007RWL-130N_manual.indd 1 4/10/07 12:29:30 PM
…
WL-130N(38 pages) |
ZyXEL Communications
www.zyxel.comwww.zyxel.comNBG-416NWireless N-lite Home RouterCopyright © 2011ZyXEL Communications CorporationFirmware Version 1.0Edition 1, 1/2011Default Login DetailsIP Address http://192.168.1.1Username adminPassword 1234
…
NBG-416N(244 pages) |
Digisol
DG-BR4000N 150Mbps Wireless LAN Broadband Router User Manual V1.1 2010-09-08 As our product undergoes continuous development the specifications are subject to change without prior notice
…
DG-BR4000N(146 pages) |
Aerohive
BeaconsBeaconsWireless ClientC:\>ipcongWindows IP CongurationEthernet adapter Wireless Network Connection: Connection-specic DNS Sufx . : IP Address. . . . . . : 1.1.1.2 Subnet Mask . . . . . : 255.255.255.0 Default Gateway . . . : 1.1.1.1C:\>telnet 1.1.1.1Aerohive QuickStartfor the HiveAP 320This QuickStart guide explains how to set …
HiveAP 320(2 pages) |
Linksys
Model No.Product DataWirelessWRT54GXThe Wireless-G Networking Solution with SRX Speed and Range eXpansionInternet-sharing Router, 4-port Switch, with a built in speed and range enhanced Wire-less-G (802.11g) Access PointSRX also increases wireless range by up to 3 times and reduces dead spots in coverage areaShares a single Inter-net connection and other res …
WRT54GX - Wireless-G Broadband Router(2 pages) |
Samsung Cell Phone SCH-I910#2GU59Y SCH-I910: Samsung Cell Phone Owner Documentation SCH-I910, 1 |
Vaisala Transmitter Humicap HMD60YVaisala Transmitter Humicap HMD60Y Operation & user’s manual Humicap HMD60Y, 18 |
Kenmore Vacuum Cleaner 116.33726PDF Manual (@4A5IAL), Kenmore 116.33726 Vacuum Cleaner (Wednesday 27-12-2023) 116.33726, 44 |
Sony Tuner WRR-810AManual: Sony WRR-810A (1QN8PQ, Upd.Wednesday 10-01-2024) WRR-810A, 64 |
Samsung Laptop NQ25NQ25 Operation & user’s manual - 9S3ALA NQ25, 153 |
Pass Laboratories Amplifier X2.5Pass Laboratories X2.5 Amplifier Owner's manual X2.5, 11 |
Phonic Measuring Instruments PAA3XUser Guide: Phonic PAA3X (HFEK3I, Upd.05/12/2023) PAA3X, 24 |
Panasonic Digital Camera Lumix DMC-TS20Panasonic Product User Guide: Lumix DMC-TS20 PDF Owner's manual - 788UI4 Lumix DMC-TS20, 79 |
Comfort Glow Indoor Fireplace CGFB32CAIndoor Fireplace PDF Installation manual CGFB32CA, 16 |
Field Controls Cooktop Oil Venting SystemsField Controls Cooktop Brochure & specs (File: field-controls-oil-venting-systems-brochure-14, 14/08/2023) Oil Venting Systems, 14 |
Sharp Camcorder VL-PD6SOperation manual for Sharp VL-PD6S Camcorder VL-PD6S, 116 |
Roland Music Mixer M-380Music Mixer PDF Owner's manual M-380, 246 |