Aztech IP150 Operation & User’s Manual

Text of Aztech IP150 User Guide:

• Aztech IP150, User Manual Page 50 of 120 8. Make your changes for the Name, Number, Contact Type, and Outgoing Identity. 9. Click Add/Edit. Delete Entries To delete an entry: 1. From the phone, press repeatedly until Information appears on the display. 2. Verify if IPAdr appears on the display. 3. Press . Get the IP address. 4. On your computer, open a browser. 5. Enter the IP address of your phone in the address bar. 6. Under Operation, click Address Book. 7. Click along the entry name to be deleted.

• Aztech IP150, User Manual Page 76 of 120 Login Information Login Information Identity active This identity can be disabled by disabling this option. This means this identity is not longer registered anymore. Displayname Set the name you would like to associate with each line, e.g. John Smith. This information is also sent out to any party you are calling. Account This is the account with which you register to a SIP registrar/proxy. It could be alphanumeric, e.g. js, or based on digits like 445. Password This is the password to be used for challenge responses. In order to protect them from unauthorized use, passwords are not displayed in their true

• Aztech IP150, User Manual Page 52 of 120 Export Address Book You can export the address book with a Comma-Separate Value (CSV) file extension. To export an address book: 1. From the phone, press repeatedly until Information appears on the display. 2. Verify if IPAdr appears on the display. 3. Press . Get the IP address. 4. On your computer, open a browser. 5. Enter the IP address of your phone in the address bar. 6. Under the Operation, click Address Book. 7. Right-click here and then select Save Target As. This opens the Save As dialog box. 8. Select a

• User Manual Page 69 of 120 Extension This key type uses the following number format:  SIP URL only e.g. [email protected] It can be used as follows: Dialog State & Call Pickup This allows showing the status (idle, ringing, busy) of a distinct phone extension on your phone. The remote phone extension has to be configured as a number. Context can be assigned to a

• Aztech IP150, User Manual Page 107 of 120 Debug Debug Syslog Server Type in the host where a Syslog Server is running to store the log messages coming from the phone. LCServer Type in the IP address of the remote LCServer if you want your phone to connect to it. Normally, you do not need to make an entry here. The LCServer is for IP150’s internal development only. SIP Trace for REGISTER/SUBSCRIBE/NOTIFY To filter out the SIP messages REGISTER/SUBSCRIBE/NOTIFY from the SIP trace web interface page, this option should be disabled. SNMP

• Aztech IP150, User Manual Page 101 of 120 SIP Type of Service (TOS/Diffserv) This option enables the phone to support quality of service (QOS) for SIP traffic in a network. This makes sense only if all parts of the involved network also support QOS. DTMF Payload Type Set up the payload type for Out-of-Band DTMF here. The default setting is 101. This can be an arbitrary 8-bit value as long as the involved communication partners are both using the same value. Network identity (port) Set a static local port number, which is used for the SIP protocol communication, in this field. Usually, the phone chooses a random one! SIP T1 (ms) Set the retry timer in milliseconds after whi

• Aztech IP150, User Manual Page 58 of 120 Redirection Redirection You can have all incoming calls diverted to a specific number. Event drop-down menu options:  Never This deactivates all call redirections.  Always All calls are diverted to the number specified in Number Redirect.  When Busy When a call is in progress, any other call made to that number is rejected and will receive a busy indication. The phone can be set in such a way that the second caller is diverted to another number set in Number Busy. After Timeout Specify the Timeout in seconds after which calls are to be diverted to the number speci

• User Manual Page 75 of 120  Push2Talk  Intercom  Action URL  Key Event  Speed Dial  None 9. Enter Number 10. Click Save. Identities On these pages you can set up the SIP identities you wish to use on your phone. Depending on the phone model it is possible to set up different number of identities. Each identity setting page consists of 4 tabs to access Lo

• Aztech IP150, User Manual Page 4 of 120 Forwarding all calls .............................................................................................................22 Forward when Busy ............................................................................................................23 Forward when not answered .............................................................................................23 Phone Behavior Menu......................................................................................24 Call Waiting Indicator/Message .........................................................................................24 Functio

• User Manual Page 117 of 120 Memory Memory displays the memory usage of the phone. Memory To access Memory: 1. From the phone, press repeatedly until Information appears on the display. 2. Verify if IPAdr appears on the display. 3. Press . Get the IP address. 4. On your computer, open a browser. 5. Enter the IP address of your phone in the ad

• Aztech IP150, User Manual Page 41 of 120 Dialing an SIP address To dial an SIP address: 1. Lift the handset or press for the speaker. 2. Dial the SIP address to call. Press 1 repeatedly to use character symbols. 3. Press to make the call. 4. Press to cancel the call. Dialing an IP address To dial: 1. Lift the handset or press for the speaker. 2. Dial the IP address to call. To display a dot, press . 3. Press to make the call. 4. Press to cancel the call. Notes:If IP address dialing l

• User Manual Page 24 of 120 Phone Behavior Menu This menu provides options to change the function type for the functio keys and change the call waiting indicator. For more details about the function keys, please refer to Function Keys Call Waiting Indicator/Message To configure CWI: 1. Press repeatedly until Phone Behavior appears on the display. 2. Press or to select a men

• Aztech IP150, User Manual Page 51 of 120 Delete Address Book To delete the address book: 1. From the phone, press repeatedly until Information appears on the display. 2. Verify if IPAdr appears on the display. 3. Press . Get the IP address. 4. On your computer, open a browser. 5. Enter the IP address of your phone in the address bar. 6. Under Operation, click Address Book. 7. Click Delete whole address book.

• Aztech IP150, User Manual Page 118 of 120 Settings This page displays a summary of your phone settings. Settings To access Settings: 1. From the phone, press repeatedly until Information appears on the display. 2. Verify if IPAdr appears on the display. 3. Press . Get the IP address. 4. On your computer, open a browser. 5. Enter the IP address of your phone in the address bar. 6. Under the Status, click Settings.

• Aztech IP150, User Manual Page 10 of 120 Keypad Key Name Function Navigation Key Used for navigating the display and phone book menus Enter Confirms an action, selection, or input Cancel Cancels an action or input Message Indicates unread messages Volume Adjusts the volume Speaker Turns the speaker on or off Keys to , , and are used to enter digits and letters. Different results occur depending on the operating mode:  Entry of digits only when dialing a phone number)  Entry of letters and digits when the keys are pressed repeatedly (

• Aztech IP150, User Manual Page 25 of 120 6. Press or to select among the following options:  Line  Shared Line  Extension  Park Orbit  DTMF codes  Push2Talk  Intercom  Action URL  Key Event  Speed Dial  None 7. Press . 8. Enter the value for the option you selected. 9. Press .

• User Manual Page 63 of 120 Privacy Settings Privacy settings Call Line Identification Presentation (CLIP) Show or hide your own phone number when making a call. Call Line Identification Restriction (CLIR) Reject or accept anonymous incoming calls. Presence Inactivity Timeout This is the time after which, if there is no activity, presence is set to closed. The default is 15 minutes.

• Aztech IP150, User Manual Page 8 of 120 About this Manual This manual provides the installation procedure, operating instructions, and advanced configuration options of the device. Target Audience This manual is designed and developed for users who are required to install and maintain the device. It assumes the user of this manual has basic knowledge and experience in configuring IP phones, telephone exchange networks, and computer systems. Document Structure The manual is divided into the following

• Aztech IP150, User Manual Page 106 of 120 PC Port The ethernet port PC which is meant for daisy chaining the PC behind the phone, may be setup to automatically negotiate its setup with the connected PC or it can be set up statically:  10 Mbps Half Duplex  10 Mbps Full Duplex  100 Mbps Half Duplex  100 Mbps Full Duplex  Auto Negotiation Detect Ethernet Cable Unplug When this option is set to on, the phone will display a warning message when it loses connectivity. Action on Ethernet cable replug Choose the action to be performed after the network connection is reestablished:  Igno

• Aztech IP150, User Manual Page 98 of 120 Audio Audio Here you can set up audio-related settings on your phone. These settings may look like this: Mute Microphone Setting this to on will mute the microphone of the phone. Tuning it off will enable the microphone again. Disable Casing Speaker Turn this setting on to disable your speaker. DTMF echo on Speaker Phone Switch DTMF echo on or off. Keytones If enabled, the phone beeps (audible feedback) on each key press. Call Released Notification Turn this to on if you want to have an audible indication when a call is terminated. Turning it off will take you directly to the idle state when a call drops. Silence Suppression To save

• Aztech IP150, User Manual Page 71 of 120 Push2Talk Just like Intercom, Push2Talk enables you to make Intercom calls to a programmed destination via the function keys. This main difference is the intercom call will remain active as long as the programmed key is pressed. The call will be released as soon as the Push2Talk key is released. This feature is particularly useful for group annoncements. Action URL Action URLs are basically HTTP GET Requests. They can be used to send various data from the phone to a web server, like: * usual settings stored on the phone * private settings e.g. passwords are re

• User Manual Page 3 of 120 Contents About this Manual......................................... 8 Target Audience ......................................................................8 Document Structure ................................................................8 About the Product ......................................... 9 Package Contents ........

• Aztech IP150, User Manual Page 37 of 120 Edit Entries To add a new contact: 1. Press Directory. By dafult, Directory is assigned to use the fourth programmable key. You may need to check if the program setting for this key has been changed. 2. Press or until the contact you want to edit appears on the display. 3. Press or until Edit appears below the contact name. 4. Edit the contact name. When you press the keys, alphanumeric characters will appear on the display. 5. Press . 6. Edit the contact’s n

• Aztech IP150, User Manual Page 120 of 120 Log, 112 Login Information, 76 Logon/Logoff, 97 MAC, 35 Memory, 117 MPO, 102 Music on Hold Server, 78 Mute, 12, 43 MWI Notification, 57 NAT Settings, 81 Network, 87 Number Display Style, 56 Number guessing, 42 Number Guessing, 93 Offer ICE, 81 Other Settings, 28 Overlap Dialing, 93 Package, 9 PCAP Trace, 116 Phone Behavior, 24, 92 Phone Interface, 21 Menus, 21 Navigation, 21 PRACK, 102 Prefix, 97 Privacy Settings, 63 Proxy Require, 79 Q-Value, 79 R

• Aztech IP150, User Manual Page 86 of 120 Software Update Here you can select the firmware binary you want to run on the phone. This section may look like this: Manual software Update Firmware Type in the firmware (-b, -l, -r, -j) URL in this field. Press Load if you made changes to these settings. The phone will now attempt to load the binary file from the newly provided URL. It will show SW on the display and then start rebooting after a couple of seconds. If it shows SW but does not start to reboot, please start the reboot process yourself by rebooting the phone. Naming conventions of the different images:  Bootloader

• Aztech IP150, User Manual Page 11 of 120 The result of keys in different operating modes: Key Digit Lower Case Upper Case 0 0 (SPC)_0 0 (SPC)_0 1 . @ 1 , ? ! - / ( ) : ; & % * # + < = > $ [ ] . @ 1 , ? ! - / ( ) : ; & % * # + < = > $ [ ] 2 abc2 ABC2 3 def3 DEF3 4 ghi4 GHI4 5 jkl5 JKL5 6 mno6 MNO6 7 pqrs7$ PQRS7$ 8 tuv8 TUV8 9 wxyz9 WXYZ9 # or . after time-out Number guessing * When pressed briefly, switches the key values from upper to lower case. When pressed for a few seconds, locks the keyboard. A lock symbol appears in the lower right corner of the display. To unlock the keyboard, press

• Aztech IP150, User Manual Page 112 of 120 Log The Log status displays records of all device transactions. You can specify the level of log you want to view on the page. Log To access Log: 1. From the phone, press repeatedly until Information appears on the display. 2. Verify if IPAdr appears on the display. 3. Press . Get the IP address.

• Aztech IP150, User Manual Page 102 of 120 Use user=phone Turn this setting on if you want to use user=phone in SIP URIs. This is to distinguish phones from different non-phone devices like gateways, etc. (RFC2543 deprecated). Publish Presence When this feature is set to on, the phone sends out PUBLISH messages showing the phone’s status. Refer-To Brackets Switch additional brackets on or off in the Signaling for Refer-To. As some devices rely on this setting, we are kind enough to offer a solution! Require PRACK To force the use of PRACK, choose on here. PRACK messages are used to acknowledge the receipt of

• Aztech IP150, User Manual Page 12 of 120 Function Key Defaults The six keys with LEDs on the right side of the keypad are programmable. The default mappings are: Key Name Function Line 1 & 2 The LED blinks to indicate an incoming call. To pick up the call, press the key opposite the blinking LED. To put a line on hold, press the key for that line. To pick up a call on hold, press the key again. Redial Redials the last called number Directory Opens the phone book. Use the navigation key to scroll within the phone book. Transfer There are two ways to transfer a call: Consultation transfer Place an ac

Related Products and Documents (IP Phone):

Comparable Devices:

Similar Resources:

• Cisco SPA509G (6 pages) REFERENCEi CISCO SPA500G SERIES REFERENCE GUIDE Part of the Cisco Small Business Pro Series, the SIP based Cisco SPA504G 4-Line IP phone with 2-port switch has been tested to ensure comprehensive interoperability with equipment from voice over IP (VoIP) infrastructure leaders. …

• Mitel 5224 (2 pages) OfficeConnect Release 5.0 Quick Reference Guide Mitel 5224/5324 IP PhoneMake a call1 Lift the Handset, or press a Line Appearance memory key, or press the function key.2 Dial the number from the keypad. - or - Press a speed dial memory key.Place a call on HoldWhile on a call press the function key.Retrieve a call from HoldPress the flashing L …

• Samsung SGH-P716 (109 pages) TRI BAND GPRS SeriesSGH-P716Portable Digital TelephoneUser ManualPlease read this manual before operating your phone, and keep it for future reference.Printed in KoreaCode No.: GH68-xxxxxAEnglish.11/2003. Rev. 1.02nd version(11 26) Intellectual PropertyAll Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its …

• Panasonic KXWT125 (84 pages) Model No. KX-WT125/KX-WT126Operating InstructionsDECT 6.0 Portable StationThank you for purchasing a Panasonic DECT 6.0 Portable Station.Please read this manual carefully before using this product and save this manual for future use.Please use only the batteries provided and charge the batteries for about 7 hours before using the handset for the first ti …

• AT&T Merlin Legend MLX-20L (8 pages) MERLIN LEGEND™Communications SystemRelease 2.0MLX Queued Call Console Quick ReferenceSystem Speed DialAccount CodesList Most Often Used CodesList Most Often Used CodesNameCodeNameCode1.2.1.2.3.3.4.4.5.5.6.6.7.7.8.8.9.9.10.10.11.11.12.12.13.13.14.14.15.15.16.16.17.17.Posted Messages1. Do Not Disturb6.11.16.2.7.12.17.3.8.13.18.4.9.14.19.5.10.15.20.AT&T C …

• Positron IP408 (84 pages) Version 1.0 August 14, 2013 C62 VoIP Phone User Manual Cortelco 1703 Sawyer Road Corinth, MS 38834 USA www.cortelco.com Tel: (662)287-5281 Fax:(662)287-3889 IP4085101 Buchan Street, Suite 200, Montreal, Quebec H4P 2R9Toll Free: 1 866 434 3944 Tel: (514) 664 [email protected] www.positrontelecom.com …

Comments, Questions and Opinions: