Manualios.com

PCI Digitizers ATS850 Operation & User’s Manual

PCI Digitizers ATS850 Manual Online:

3.4, 2174 votes
PCI Digitizers ATS850 User Manual
PCI Digitizers ATS850 User Guide
PCI Digitizers ATS850 Online Manual

Text of PCI Digitizers ATS850 User Guide:

  • PCI Digitizers ATS850, ii ATS850 User Manual Important Information Warranty The ATS850 is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. AlazarTech, Inc. will, at its option, repair or replace equipment that proves to be defective during the warranty period. This warranty includes parts and labor. The media on which you receive AlazarTech, Inc. software are warranted not to fail to execute programming instructions, d

  • PCI Digitizers ATS850, ATS850 User Manual 5 ATS-SDK API The ATS-SDK API is used for programming the ATS850 in C/C++ or Visual BASIC. It provides the exact same API that is used for writing AlazarDSO software. To help you get started, ATS-SDK comes with examples you can use or modify. ATS-VI LabVIEW VI ATS-VI allows you to integrate the ATS850 into your own LabVIEW program. A high level VI is supplied that requires very few controls to get started.

  • PCI Digitizers ATS850, ATS850 User Manual 11 Unpacking Your digitizer is shipped in an antistatic package to prevent electrostatic damage to the digitizer. Electrostatic discharge can damage several components on the digitizer. To avoid such damage in handling the digitizer, take the following precautions: • Ground yourself via a grounding strap or by holding a grounded object. • Touch the antistatic package to a metal part of your computer chassis before removing the digitizer from the package. • Remove the digitizer from the

  • ATS850 User Manual 7 Optional Upgrades AlazarTech offers the following upgrades and accessories for use with your ATS850 digitizer: • ATS850: External Clock Upgrade • ATS850: Master/Slave SyncBoard 2 position • ATS850: Master/Slave SyncBoard 4 position • ATS850: Master/Slave SyncBoard 8 position • ATS850: Trigger Out Upgrade

  • PCI Digitizers ATS850, 14 ATS850 User Manual For Master/Slave Installation If you are installing multiple ATS850 digitizers that will be configured as a Master/Slave system, make sure that you insert all cards in adjacent slots. The connector on the SyncBoard that is labeled as “M” (Master), must be inserted into the Master/Slave connector of the left-most digitizer, if you are facing the BNC connectors of the ATS850 digitizers.

  • PCI Digitizers ATS850, ATS850 User Manual 35 Pipelined ADC The ADC on the ATS850 is a pipelined flash converter with a maximum conversion rate of 50 MS/s. If you use an external clock, you must provide a free-running clock to ensure reliable operation. You also must follow all the timing specifications on the external clock as described in Appendix A, Specifications. Using a pipelined architecture also introduces a lower limit on the sampling rate. For the ATS850, the accuracy starts to degrade below 10 KS/s. Pre-Trigger Multiple Record Acquisition The ATS850 allows the capture of multiple records into the on-board memory. This allows you t

  • ATS850 User Manual iii Warning Regarding Use of AlazarTech Products 1. ALAZARTECH, INC. PRODUCTS ARE NOT DESIGNED WITH COMPONENTS AND TESTING FOR A LEVEL OF RELIABILITY SUITABLE FOR USE IN OR IN CONNECTION WITH SURGICAL IMPLANTS OR AS CRITICAL COMPONENTS IN ANY LIFE SUPPORT SYSTEMS WHOSE FAILURE TO PERFORM CAN REASONABLY BE EXPECTED TO CAUSE SIGNIFICANT INJURY TO A HUMAN.

  • PCI Digitizers ATS850, 2 ATS850 User Manual About Your ATS850 Thank you for your purchase of an ATS850. The ATS850 PCI based waveform digitizer has the following features: • Two 8-bit resolution analog input channels • Half length PCI bus card • Real-time sampling rate of 50 MS/s to 10 KS/s • 25 MHz analog input bandwidth • Analog trigger channel with software-selectable level, slope, and hysteresis • Software-selectable AC/DC coupling and 1MΩ/50Ω input impedance • 262,140 sample onb

  • PCI Digitizers ATS850, iv ATS850 User Manual Compliance FCC/Canada Radio Frequency Interference Compliance* Determining FCC Class The Federal Communications Commission (FCC) has rules to protect wireless communications from interference. The FCC places digital electronics into two classes. These classes are known as Class A (for use in industrial-commercial locations only) or Class B (for use in residential or commercial locations). Depending on where it is operated, this product could be subject to restrictions

  • PCI Digitizers ATS850, 20 ATS850 User Manual f) Select the ATS850.INF file and click Open The operating system may display Install from Disk dialog box again. If it does, Click OK, otherwise continue to the next step g) Operating system will display the Select a Device Driver dialog box again. Make sure the AlazarTech ATS850 PCI Digitizer is selected. Then click Next. h) Operating system will display the Update Driver Warning. This warning is meant to tell you that Windows does not recognize the hardware. Click Yes. i) Operating system will display the Start Device Driver Installation dialog box. Click Next. System will copy all nec

  • PCI Digitizers ATS850, vi ATS850 User Manual Table of Contents CHAPTER 1 - INTRODUCTION ..................................................1 About Your ATS850 .....................................................................2 Acquiring Data with Your ATS850................................................3 Interactively Controlling your ATS850 with AlazarDSO ...........4 ATS-SDK API ...........................................................................5 ATS-VI LabVIEW VI........................................

  • PCI Digitizers ATS850, ATS850 User Manual 31 Chapter 3 - Hardware Overview This chapter includes an overview of the ATS850, explains the operation of each functional unit making up your ATS850, and describes the signal connections. Following is a high- level block diagram of ATS850. P C I B U S CH A Analog Front-End CH B Analog Front-End EXT Trig Analog Front-End A D C A D C ASoPC Acquisition System On Programmable Chip (FPGA) Trigger Circuit EXT Clock Input Protection PCI Bus Interface ASIC Memory

  • ATS850 User Manual 45 Dynamic Parameters Typical values measured using a randomly selected ATS850 in ±1V input range, DC coupling and 50Ω impedance. Input was provided by a HP8656A signal generator, followed by a 9-pole, 1 MHz band-pass filter. Input frequency was set at 1 MHz and amplitude was 650 mV rms (92% of full scale input). SNR 42 dB SINAD 40 dB THD -46 dB SFDR -4

  • PCI Digitizers ATS850, 32 ATS850 User Manual Input Connectors These ATS850 digitizers have two standard BNC female connectors for CH A and CH B analog input connections, one standard BNC female connector for the EXT (External Trigger) input and one standard BNC female connector for the optional ECLK (External Clock) input. The following pictorial shows the various connectors available on the digitizer bracket. Identification LED For future use Optional External Clock input Or Optional TRIG OUT output External Tri gg e r Channel B Channel A

  • PCI Digitizers ATS850, ATS850 User Manual 21 Installing ATS850 Driver In Windows XP or Vista ATS850 Install Disk is fully compatible with both 32-bit and 64-bit versions of Windows XP and Windows Vista. Before proceeding, make sure that you have sufficient administrative rights to install device drivers on your computer. Typically, you should be the Administrator for the computer you are installing device drivers on. When you first plug in an ATS850 digitizer into a computer, the plug-n-play Windows XP/Vista operating system will detect the presence of a new PCI card and ask you to provide the device driver. a) Operating System will display the Welcome to t

  • PCI Digitizers ATS850, 18 ATS850 User Manual f) Operating system will display the Select a Device Driver dialog box again. Make sure the AlazarTech ATS850 PCI Digitizer is selected. Then click Next. g) Operating system will display the Update Driver Warning. This warning is meant to tell you that Windows does not recognize the hardware. Click Yes. h) Operating system will display the Start Device Driver Installation dialog box. Click Next. System will copy all necessary files to the appropriate folders. i) Operating system will display the Completing the Fou

  • PCI Digitizers ATS850, 24 ATS850 User Manual 4. Optionally, install the ATS-SDK software development kit or ATS-VI LabVIEW VI, which enables you to programmatically control the ATS850 Insert the ATS-SDK or ATS-VI CD. Software installation will start automatically. If, for any reason, installation does not start automatically, run the SETUP.EXE program. Follow the instructions on the screen. Note that you must have already installed the ATS850 drivers for any of the sample programs included with the ATS-SDK or ATS-VI to work pr

  • PCI Digitizers ATS850, ATS850 User Manual 19 Installing ATS850 Driver in Windows 2000 Before proceeding, make sure that you have sufficient administrative rights to install device drivers on your computer. Typically, you should be the Administrator for the computer you are installing device drivers on. When you first plug in an ATS850 digitizer into a computer, the plug-n-play Windows 2000 operating system will detect the presence of a new PCI card and ask you to provide the device driver. a) Operating System will display the Welcome to the Found N

  • ATS850 User Manual 39 Restrictions To ensure proper master/slave operation of your ATS850 digitizers, you must observe the following restrictions: • All Master/Slave digitizers must be installed in adjacent slots, i.e. there should be no gap between the digitizers that are to be configured as a Master/Slave system Good Insta

  • PCI Digitizers ATS850, 28 ATS850 User Manual The solution that always works is: • Remove Norton Anti-Virus software • Reboot the PC after removing Norton Anti-Virus. • Make sure AlazarTech hardware and software are fully functional • Re-install Norton Anti-Virus software AlazarTech PCI digitizer products are fully compatible with all internet security and anti-virus software. Users must make sure that their security software has been updated and configured properly.

Related Products and Documents (PCI Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Novell ACCESS MANAGER 3.1 SP2 - README 2010 Operation & user’s manual novell/access-manager-3-1-sp2-readme-2010-FPC.pdf 09 Mar 2024 58
2 Nissan Rogue Owner's manual nissan/rogue-U21.pdf 02 Oct 2022 378
3 Eaton Powerware 9390 Installation and operation manual eaton/powerware-9390-121.pdf 14 Dec 2022 218 2.05 Mb
4 Lenovo ThinkPad X121e Operation & user’s manual lenovo/thinkpad-x121e-FWC.pdf 22 May 2023 194
5 Kenmore 721.88502 Installation instructions manual kenmore/721-88502-659.pdf 08 Feb 2023 20
6 Toshiba IK-64DNA Instruction manual toshiba/ik-64dna-9GN.pdf 13 Jan 2023 14 7.09 Mb

Similar Resources:

  • Conrad

    87 39 54

    (4 pages)
    Bestimmungsgemäße VerwendungDas Produkt ist zum Einbau in einen PCI-Steckplatz eines Computers vorgesehen und stellt dort Ein- und Ausgänge für Audiosignale zur Verfügung. Weiterhin bietet die Steckkarte einen digitalen Audioausgang.Dieses Produkt erfüllt die gesetzlichen, nationalen und europäischen Anforderungen. Alle ent-haltenen Firmennamen und Pr …
  • TerraTec

    CAMEO 400DV

    (2 pages)
    Digital Video Editing SystemVideo System VideoSystem Cameo 400 DV From videos to movies. Forget your old, friend torturing, videos from your last trip in the mountains With the Cameo 400 DV you can transform them into Hollywood ripe reflections of the epos. Cameo 400 DV allows you digital video editing directly from your PC, and in professional quality. Yo …
  • StarTech.com

    PCI1S950DV

    (10 pages)
    16950 RS-232 Dual Voltage / Dual Profile Serial CardPCI1S950DVPCI2S950DVInstruction ManualActual product may vary from photo1 Port PCI 16950 RS-232 Dual Voltage / Dual Profile Serial Card2 Port PCI 16950 RS-232 Dual Voltage / Dual Profile Serial Card …
  • NetComm

    NP7032

    (2 pages)
    NETCOMM LIMITED ABN 85 002 490 486 • 2-6 Orion Road, LANE COVE, NSW 2066 • phone 02 9424 2070 • fax 02 9424 2010 • email [email protected] MBPS IEEE 802.11b PC CARDSMALL-MEDIUM BUSINESSConnect your Notebook PC to a wireless LAN withthis 32Bit PC CardIEEE 802.11b Direct Sequence Standard CompliantDynamic data rate scaling at 11, …
  • US Robotics

    USR5699C

    (12 pages)
    part number R24.0487.0056K PCI Faxmodem for WindowsInstallation GuideWindows XP, 2000, Me, 98, and 95Operating Systemsnuméro de pièce : R24.0487.0056K PCI Faxmodem for WindowsGuide d’installationSystèmes d'exploitationWindows XP, 2000, Me, 98 et 95 …
  • SIIG

    RS-232 to Bluetooth

    (12 pages)
    1Introducing the RS-232 to BluetoothThe RS-232 to Bluetooth converter allows any device withan RS-232 port to communicate wirelessly.Features and Benefits• Replaces RS-232 cable• Full Bluetooth 2.0 support + EDR• Easy to configure baud rate and master or slave roleselectable• Supports baud rates up to 115.2 K bps• 300 feet ( Enhanced Antenna ); CLA …

Comments, Questions and Opinions: